2148.4[ ]

33613.2[ ]

28611.26[ ]

( )28611.26[ ]

101.54.00[ ]

22.8.90[ ]

394.215.52[ ]

50219.76[ ]

589[23.2]

285.711.25[ ]

237.19.34[ ]

160.056.301[ ]

3.77.148[ ]

160.056.301[ ]

172.656.797[ ]

953.74[ ]

4X 139.2[5.48]

495.219.50[ ]

229.59.03[ ]

181.77.15[ ]

717.728.3[ ]

71028.0[ ]

370.9[14.60]

76.13.00[ ]

30�$�

60�$�

75729.8[ ]

80231.57[ ]

1937.6[ ]

57222.52[ ]

M 1 OF 2

1:12

25.4 mm = 305 mm1" = 1'

mm(in)A

8M45036372.0L TIER3 - VGT

BOBTAIL - NO TRANSMISSON

SHEETSSCALEUNITSREVISION

NOTES:(1) REFER TO THE APPLICATION MANUAL FOR COMPLETE PRODUCT INSTALLATION REQUIREMENTS.(2) DIMENSIONS REQUIRE A MINIMUM OF 1/2 in. (13 mm) CLEARANCE FOR MOTOR MOUNT DEFLECTION.(3) INNER AND OUTER SURFACES OF TRANSOM MUST BE PARALLEL WITHIN 1/8 in. (3 mm) IN AREA COVERED BY TRANSOM PLATES AND REMAIN WITHIN TRANSOM THICKNESS LIMITS.(4) REFER TO "TRANSOM CUTOUT" IN THE INSTALLATION MANUAL TO FIND THE CRANKSHAFT CENTERLINE VS. BOAT BOTTOM.

CRANKSHAFT

(3)

BACK OF BLOCK

FORMAT B SIZE

FFOB

CG

RFOB

SLOT THRU

REAR ENGINELIFTING

FRONT ENGINE LIFTING

OIL FILTER

WET EXHAUST OUTLET

AUX. HEATER RETURN

CG

SLOT THRUFRONT & REAR

SLOT THRUFRONT & REAR

SLOT THRUFRONT & REAR

SLOT THRUFRONT & REAR

838[33.0]

MINIMUM ENGINE SPACING

77.53.05[ ]

416.3[16.39]

LENGTH OF BLOCK

17.9.70[ ]

8.7.34[ ]

953.74[ ]

1505.91[ ]

170.16.70[ ]

40015.7[ ]

23.8.94[ ]

289.611.40[ ]

8.32[ ]

8.32[ ]

710[27.95]

M 2 OF 2

1:12

25.4 mm = 305 mm1" = 1'

mm(in)A

8M45036372.0L TIER3 - VGT

BOBTAIL - NO TRANSMISSON

SHEETSSCALEUNITSREVISION

NOTES:(1) REFER TO THE APPLICATION MANUAL FOR COMPLETE PRODUCT INSTALLATION REQUIREMENTS.(2) DIMENSIONS REQUIRE A MINIMUM OF 1/2 in. (13 mm) CLEARANCE FOR MOTOR MOUNT DEFLECTION.(3) INNER AND OUTER SURFACES OF TRANSOM MUST BE PARALLEL WITHIN 1/8 in. (3 mm) IN AREA COVERED BY TRANSOM PLATES AND REMAIN WITHIN TRANSOM THICKNESS LIMITS.(4) REFER TO "TRANSOM CUTOUT" IN THE INSTALLATION MANUAL TO FIND THE CRANKSHAFT CENTERLINE VS. BOAT BOTTOM.

FORMAT B SIZE

CRANKSHAFT

* VIEWS ARE WITH ENGINE COVER REMOVED

RFOB

FFOB

BACK OF BLOCK

AIR FILTER

POWER STEERING/GEAR OIL COOLER INLET

POWER STEERING/GEAR OIL COOLER OUTLETAUX. HEATER SUPPLY

FUEL INLET

THROTTLE CABLE CONNECTION

�n�31.5 [1.24]SEAWATER INLET

PRIMING PUMP

BLOCK GROUND (-)

FUEL FILTER

BATTERY (+)

STARTER MOTOR

OIL/AIR SEPARATOR

ENGINE OIL FILL CAP

ALTERNATOR

COOLANT FILL CAP

OIL LEVER GAGE

FRONT ENGINE LIFTING

REAR ENGINE LIFTING