263 Polystyrene SDS

8/3/2019 263 Polystyrene SDS

1/4

Safety Data Sheets (SDS)Safety Data Sheets (SDS)Safety Data Sheets (SDS)Safety Data Sheets (SDS)

1

1. PRODUCT AND COMPANY IDENTIFICATION

CHEMICAL NAMEPOLYSTYRENE (PS)

REGISTRATION NUMBERS:

PRODUCT CODE330332336336T

SUGGESTED AND RESTRAINT IN USINGCD-CASELamp decorationToy3C Products

StationeryContainerWith TPR mix...

MANUFACTURERS OR SUPPLIER NAMEEN CHUAN CHEMICAL INDUSTRIES CO.,LTD.

AddressNo. 676, Taiping Road , Taiping District, Taichung City , Taiwan .

Tel+886-4-22794176

Fax+886-4-22789207

Emergency Tel+886-4-7990429-530

[email protected]

2. HEALTH HAZARD INFORMATION

DANGEROUS CLASSIFICATION:--

CONTENT DESIGNATION--

ICON--

WARNWarned

HAZARD INFORMATION This product is not expected to be a hazard. However, the residual

monomer styrene in IARC list is a 2B-class specification: probably carcinogenic.

HAZARD PREVENTPut in shady and cool place.

OTHER HAZARD--

3. COMPOSITION / INFORMATION ON INGREDIENTS

CHINESE AND ENGLISH NAME POLYSTYRENE

SYNONYM NAME--

CAS No.9003-53-6

HAZARD COMPOSITIONSENGLISH NAME Wt% by weight CAS No. EC No.

MONOMER STYRENE less than 1% 100-42-5 202-851-5

zinc distearate less than 0.05% 557-05-1 209-151-9

Distillates (petroleum),hydrotreated heavy paraffinic 5 % 64742-54-7 265-157-1

4. EMERGENCY AND FIRST AID PROCEDURES

EYE CONTACTFlush eyes with plenty of clean water.

INGESTIONSee a doctor if uncomfortable.

INHALATIONRemove affected person from dusty environment .See a doctor if uncomfortable.

SKIN CONTACTDo not have bad affection if not often touched.

IMPORTANT SYMPTOM--

FIRST-AID PERSONNEL PROTECTION-- Wear dustproof gauze mask and goggles.

SUGGESTION FOR THE DOCTORThere is no therapeutic medicine.


2/4


2

5. FIRE AND EXPLOSION HAZARDS

EXTINGUISHING MEDIAUse water fog , CO2 , Dry chemical and Foam.

SPECIAL DANGER THAT MAY ENCOUNTER WHILE PUTTING OUT THE FIRE--

SPECIAL FIRE FIGHTING PROCEDURES AND PRECAUTIONSMaterial will not burn unless

preheated. Do not enter confined fire space without full bunker gear. Cool fire exposed containers with

water.

FIRE FIGHTER APPARATUSIncluding a positive pressure nose approved SELF CONTAINED

BREATHING APPARATUS.

6. ACCIDENTAL RELEASE MEASURES

PERSONAL PROTECTIONPellets may present a slipping hazard.

ENVIRONMENTAL PROTECTIONKeep out of irrigation ditches , sewer and water

supplies. Spills should be collected to prevent contamination of waterways.

CLEAN UPUse barrel or bag collect.

7. HANDLING AND STORAGE

HANDLINGGood housekeeping and controlling dusts are necessary for safe handling of product.

Workers should be protected from possibility of contact with molten resin during

treatment.

STORAGEStore in a dry place. Avoid exposure to high temperature or under flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

ENGINEERING CONTROLSGood general ventilation should be sufficient for most conditions. Ifoverhead occurs during processing, exhaust ventilation should be provided.

EXPOSURE GUIDELINES: Unestablished

PERSONAL PROTECTIVE EQUIPMENT

RESPIRATORY PROTECTIONIn dust atmospheres, use an approved dust respirator.

SKIN PROTECTIONClean body-covering clothing should be needed.

EYESIf there is a potential for exposure to particles which could cause mechanical injure to the

eyes .Wear chemical goggles.

9. PHYSICAL DATA

PHYSICAL STATESolid ODOROdorless

OLFACTORY THRESHOLD VALUE-- MELTING POINT180

pH-- EXPLOSIVE LIMITS--

FLAMMABLE ( SOLID, GAS)--FLASH POINT--

METHOD OF TESTING--

TEMPERATURE OF SPONTANEOUS

COMBUSTION427CBOILING POINT / RANGE OF BOILING POINT

-- C

VAPOR PRESSURE-- C VAPOR DENSITY (Air=1)--

SPECIFIC GRAVITY1.00~1.05 SOLUBILITYNot soluble in water

log Kow-- VOLATILINE THE SPEED--


3/4


3

10. STABILITY AND REACTIVITY

STABILITY : Stable

HAZARDOUS IN SPECIAL SITUATIONUnknown

CONDITIONS TO AVOIDAvoid temperatures above 300 , because product can decompose at

elevated temperatures.

INCOMPATIBILITY WITH OTHER MATERIALSUnknown.

HAZARDOUS DECOMPOSITION PRODUCTSProcessing may release fumes which may include

polymer fragments and other decomposition products. Fumes can be irritating. At temperatures

exceeding melt temperatures, polymer fragments can occur.

11. TOXICOLOGICAL INFORMATION

TOXICITYUnestablished

12. ECOLOGICAL INFORMATION

ECOLOGICAL TOXICITYNone

DEGRADATION & PERSISTENCEThis water insoluble polymeric solid is expected to be inert in the

environment. Surface degradation is expected with exposure to sunlight. No appreciable biodegradation

is expected.

ORGANISM ACCUMULATION--

IN THE FLOWABILITY OF THE SOILIt is unable to be decomposed by biochemical function.

OTHER BAD EFFECTS--

13. DISPOSAL CONSIDERATIONS

Preferred methods of waste disposal are incineration.

14. TRANSPORTATION REQUIREMENTS

UN.NO.-------

THE NAME OF UN.TRANSPORT-------

HARMFULNESS CLASSIFICATION-------

PACKAGING CLASSIFICATION-------

MARINE POLLUTERNone

THE METHOD OF TRANSPORT AND ATTENTIVE MATTERS-------

15. REGULATORY INFORMATIONS

Waste Disposal Action. (In Taiwan)

REACH Registration NumberEnglish Name Registration Number OR Company

Styrene 01-2119457861-32-**** Nanya Technology Europe GmbHDistillates (petroleum),

hydrotreated heavy paraffinic 01-2119484627-25-****REACH ONLY REPRESENTATIVE SERVICES

GMBH

If demands the REACH related information to invite the Qia this corporate business personnel connection.


4/4


4

16. OTHER INFORMATIONS

REFERENCES None

MANUFACTURERSEN CHUAN CHEMICAL INDUSTRIES CO.,LTD.

ADDRESSNo. 676, Taiping Road , Taiping District, Taichung City , Taiwan .

TEL: +886-4-7990429-151TABULATION

NAMEBENNY

DATE 2011.04.28

Documents

263 Polystyrene SDS