19
Quick Start EchoLife HG8245&HG8247 GPON Terminal

31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

Embed Size (px)

Citation preview

Page 1: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

Quick Start

EchoLife HG8245&HG8247 GPON Terminal

Page 2: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

EchoLife HG8245&HG8247 GPON Terminal

V100R001

Quick Start

Issue 02

Date 2010-06-07

Part Number 31504920

Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.

Page 3: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders.

NoticeThe information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but the statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.

Page 4: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

1

Precautions

For safety purposes, before operating the device, take the safety precautions carefully.

Basic Requirements

Keep the device dry during storage, transportation, and running of the device.

Prevent the device from colliding with other objects during storage, transportation, and running of the device.

Install the device in strict compliance with the vendor requirements.

Do not dismantle the device without permission. Contact the specified service center when a fault occurs on the device.

No enterprise or personnel should modify the structure, security, and performance designs of the device without authorization.

Abide by the local laws and regulations and respect the legal rights of other people when using the device.

Environmental Requirements

Install the device in a well-ventilated indoor place that is not directly exposed to sunlight.

Keep the device clean.

Keep the device away from water sources or a damp environment.

Do not place any object on the device as the heat or weight of the object may damage the device.

Leave a space of at least 10 cm around the device for heat dissipation.

Keep the device away from heat sources or exposed fire sources, such as electrical heaters and candles.

Keep the device away from the electrical appliances with strong magnetic or electric fields, such as microwave ovens, refrigerators, and mobile phones.

Instructions for Cleaning

Before cleaning the device, stop running it, switch off the power, and remove all cables, including the power cable, optical fibers, and network cables, from the device.

Do not use cleaning fluid or spray-on detergent to clean the shell of the device. Use a soft cloth instead.

Page 5: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

2

PrecautionsInstructions for Use

Use the accessories delivered with the device, or use those recommended by the vendor, such as the power adapter and battery.

The power supply voltage of the device must meet the requirements on the input voltage of the device.

Keep the power plug clean and dry to avoid electric shocks or any other hazard.

Dry your hands before removing or inserting cables.

Stop the device and switch off the power before removing or inserting cables.

Switch off the power and remove all cables, including the power cable, optical fibers, and network cables, from the device during stormy days.

Switch off the power and remove the power plug if the device is shut down for a long term.

Keep the device free of contact with water or other liquid. If such an accident occurs, switch off the power immediately and remove all cables, including the power cable, optical fibers, and network cables, from the device. Contact the specified service center in case of a device failure.

Do not stamp, pull, drag, or excessively bend the cables because they may get damaged, thus leading to a device failure.

Do not use cables that are damaged or aged.

Do not look directly into the optical port on the device without eye protection as the infrared may injure your eyes.

In case of any abnormalities, such as smoke, abnormal sound, or odor, immediately stop the device, switch off the power, and remove all cables, including the power cable, optical fibers, and network cables, from the device. Contact the specified service center in case of a device failure.

Prevent foreign objects such as metal objects from dropping into the device through the heat dissipation holes.

Prevent the outer case of the device from being scratched as the paint that falls into the device may cause a short circuit. In addition, it can cause an allergic reaction to human body.

Keep the device out of the reach of children as the components or accessories may be swallowed.

Instructions for Environmental ProtectionDispose of the obsolete device and batteries to the specified recycle place.

Abide by the local laws and regulations to handle the packaging materials, run-out batteries and obsolete device.

Page 6: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

3

IntroductionThe appearance of GPON terminals HG8245 and HG8247 is as follows:

Product Name Appearance

HG8245

HG8247

The HG8245 and the HG8247 have similar appearance but slightly differ in ports, LEDs, and technical specifications. For details, see "Connecting Cables", "Description of LEDs", and "Technical Specifications".

The figures shown in this document may differ from the actual HG8245/HG8247, but the difference does not affect the functions of the HG8245/HG8247.

Page 7: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

4

Unpack the product and check carefully the items listed in the following table. If the actual items do not match the items listed in the table, please contact the vendor.

Installing the HG8245/HG8247

No. Item Quantity

1 HG8245/HG8247 1

2 Power adapter 1

3 Network cable 1

4 Quick Start 1

5 Qualification Card 1

Installation List

Installation Procedure

The HG8245/HG8247 can be placed on a horizontal workbench or mounted onto a wall vertically or horizontally. The methods for mounting the HG8245 and the HG8247 onto a wall are the same. The procedure is as follows:Step 1 Mark positions of two holes for fixing the HG8245/HG8247. For the distance between holes, see the following table.Step 2 Select a proper drill bit according to the outer diameter of the mounting screws. Use a hammer drill to drill at the marked positions on the wall.Step 3 Use a screwdriver to fasten the mounting screws at the positions of the holes on the wall.Step 4 Mount the HG8245/HG8247 onto the mounting screws.

Product Distance Between Mounting Holes

HG8245 111.5 mm

HG8247 121.5 mm

Page 8: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

5

Installing the HG8245/HG8247The following figures show how to mount the HG8245/HG8247 horizontallyand vertically.

Mounting the HG8245/HG8247 horizontally

Mounting the HG8245/HG8247 vertically

Page 9: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

6

Connecting Cables

Cable Connections Between the HG8245 and Other Devices

5

4

7

3

6

8

2

1

BBU WLAN WPS RESETUSB

109

1 Optical port in the wall 2 PC 3 Wi-Fi terminal

4 IP set-top box (STB) 5 TV set 6 Telephone set

7 Fax machine 8 Power adapter 9 Backup battery unit

10 USB storage device

Page 10: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

7

Connecting CablesCable Connections Between the HG8247 and Other Devices

5

4

7

3

6

8

2

1

5

109

1 Optical port in the wall 2 PC 3 Wi-Fi terminal

4 IP set-top box (STB) 5 TV set 6 Telephone set

7 Fax machine 8 Power adapter 9 Backup battery unit

10 USB storage device

Page 11: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

8

Connecting Cables

Step 1 Use an optical fiber to connect the OPTICAL port on the HG8245/HG8247 to the optical port in the wall.

Step 2 Use a coaxial cable to connect the CATV port to the TV set.Step 3 Use a network cable to connect the LAN port to the Ethernet port of the PC or IP STB.Step 4 Use a telephone cable to connect the TEL port to the telephone set or fax machine.Step 5 Use a power cable to connect the POWER port to the power adapter or backup battery unit.

Step 6 Use a USB data cable to connect the USB port to the USB storage device.Step 7 Press the WLAN switch to enable the Wi-Fi access function. By default, this function is enabled.Step 8 Press the WPS switch to enable the WPS encryption function.

Step 9 Press the ON/OFF power button.

The optical connector connected to this OPTICAL port is an SC/APC connector, and the type of the optical connector connected to the optical port in the wall is determined according to actual conditions.

The preceding cable connections consider connection to the power adapter as an example. The method is the same for connecting the HG8245/HG8247 to the backup battery unit: use a power monitoring cable to connect the BBU port to the monitoring port of the backup battery unit. Then, use the HG8245/HG8247 to monitor the backup battery unit.For instructions on the backup battery unit, see the corresponding guide to the backup battery unit.

Before enabling the WPS encryption function of the HG8245/HG8247 by pressing the WPS switch, make sure that the function is configured on the system software

beforehand. For detailed configurations, see the corresponding service manual.

Refer to the preceding cable connections of HG8245/HG8247 and select the following corresponding steps to connect the GPON terminal.

Page 12: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

LEDs of the HG8245

LEDs of the HG8247

WPS WLAN POWER TEL1 TEL2 LAN1 LAN2 LAN3 LAN4 LOS PON

WPS WLAN POWER TEL1 TEL2 LAN1 LAN2 LAN3 LAN4 LOS PONTEL3 TEL4 CATV

9

Description of LEDs

Page 13: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

10

Description of LEDsRead the following description of LEDs by referring to the preceding figures of LEDs.

LED Status Description

WPS

On The WPS function is enabled.

BlinkingAt least one Wi-Fi terminal is accessing the system.

Off The WPS function is disabled.

WLAN

On The WLAN function is enabled.

Blinking Data is being transmitted.

Off The WLAN function is disabled..

POWER

Green The HG8245/HG8247 is powered on.

Orange The backup battery is supplying power.

Off The HG8245/HG8247 is powered off.

TEL1–TEL2

OnThe connection between the TEL port and the voice server has been set up.

Fast blinking

(Twice per second)

The voice service of the TEL port is established and is in the off-hook or ringing state.

Slow blinking

(Once two seconds)The voice service of the TEL port is registering.

OffThe connection between the TEL port and the voice server is not set up.

TEL3–TEL4 (These two LEDs are not used.)

LAN1–LAN4

On Ethernet connection is normal.

BlinkingData is being transmitted through the Ethernet port.

Off Ethernet connection is not set up.LOS See Table 2.PON See Table 2.

CATVOn

The CATV function is enabled and CATV signals are received.

OffThe CATV function is disabled or CATV signals are not received.

In the preceding table, if the LED status is marked "Blinking" but the frequency is not specified, it indicates that the blinking frequency of the LED is determined by the data traffic transmitted.

Table 1 LED status indications 1

Page 14: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

11

Description of LEDsPON and LOS are GPON LEDs. The status of PON and LOS reflects the connection between the HG8245/HG8247 and the optical line terminal (OLT). The following table describes the status of the PON and LOS LEDs.

Table 2 LED status indications 2

No.Status

DescriptionPON LOS

1 Off Off The ONT is disabled by the OLT.

2 Fast blinking

(Twice per second)

Off The ONT tries to create a connection to the OLT.

3 On Off A connection is created between the ONT and the OLT.

4 Off Slow blinking

(Once two seconds)

The receive optical power of the ONT is lower than the receiver sensitivity.

5 Fast blinking

(Twice per second)

Fast blinking

(Twice per second)

The OLT detects that the device is a rogue ONT.

When the LEDs are in the states as described in No. 5, that is, the OLT detects that the device is a rogue ONT, rectify the fault in time and replace the rogue ONT.

Page 15: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

12

FAQsThe POWER LED is off.

Check whether the ON/OFF button on the rear panel is pressed.

Check whether the power adapter matches the HG8245/HG8247.

Check whether the power connection is correct.

The LOS LED is blinking.Check whether the optical fiber is connected properly.

Check whether there is dirt on the optical connector.

The PON LED is off.Check whether the optical fiber is properly connected to the PON port.

The HG8245/HG8247 fails to register with the OLT. Contact the service provider for help.

The CATV LED is off.Contact the service provider to confirm that you have subscribed to the CATV function or received the CATV signal..

The LAN LED is off.Check whether the network cable delivered with the device is used.

Check whether the network cable is connected properly.

Check whether the LED of the network adapter is on.

Check whether the network adapter works normally.

The TEL LED is off.Check whether the connection of the telephone cable is correct.

Check whether the telephone set is taken off the hook.

The WPS LED is off.Check whether the WPS service is started.

The WLAN LED is off.Check whether the WLAN service is started.

When to reset the HG8245/HG8247?If services are interrupted during operation, you can reset the HG8245/HG8247. If the problem persists after reset, contact the service provider for technical support.

How to reset the HG8245/HG8247?Press the RESET button by using a sharp-ended object and then release the button. Press the button to reset the device; press and hold the button (longer than 10s) to restore the device to the default settings and reset the device. If the LED is off and then on again, it indicates that the system is reset successfully.

Page 16: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

13

Item HG8245 HG8247

Dimensions (L x W x H) 195 mm x 174 mm x 34 mm 268 mm x 213 mm x 34 mm

Weight (including the power adapter)

About 550 g About 800 g

Power supply 11 – 14 V DC, 2 A 11 – 14 V DC, 2 A

Power adapter input100 – 240 V AC

50 – 60 Hz

100 – 240 V AC

50 – 60 Hz

Power consumption

Minimum: 6.5 W

Maximum: 17 W

Average: 8 W

Minimum: 6.5 W

Maximum: 19.5 W

Average: 11 W

Working temperature 0oC to +40oC 0oC to +40oC

Working humidity 5% – 95% (non-condensing) 5% – 95% (non-condensing)

Technical Specifications

Page 17: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

User Information

Personal or Company Full Name:__________________________________________________

Address/Postal Code:____________________________________________________________

Telephone Number:______________________________________________________________

Email:_________________________________________________________________________

Product Type:___________________________________________________________________

Product Serial Number:___________________________________________________________

Purchase Date:_________________________________________________________________

Invoice Number:________________________________________________________________

Dealer's Name:_________________________________________________________________

Dealer's Address:________________________________________________________________

Dealer's Telephone:______________________________________________________________

Warranty Card

Thank you for choosing Huawei Technologies Co., Ltd. – a leading telecom solution provider. To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition.

Preserve well. No reissue.

Dealer's Seal:

Page 18: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

Limited Warranty

Huawei Technologies Co., Ltd.

Address: Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of ChinaWebsite: http://www.huawei.com

Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (hereinafter referred to as Huawei) warrants its access terminals (“Products”) to be free from defects in materials and workmanship under normal consumer usage for one year from the date of purchase of the product ("Warranty period"). During the warranty period, a Huawei authorized service partner shall remedy defects in materials and workmanship free of charge.Special Notice:(1) The warranty card shall be applicable only after being stamped by the dealer.(2) The warranty card must be preserved in good condition and free of any scratch or alteration.(3) To claim such service for defects that are not included in the following exclusion terms, the warranty card and the invoice that records the product serial number shall be presented to a Huawei authorized service partner.Exclusions:In any of the following cases, the warranty card becomes unenforceable or inapplicable without prior notice:(1) The defects are caused by improper handling in transportation and assembly.(2) The defects are caused by the fact that the product is dismantled or altered by anyone that is not from a Huawei authorized service partner.(3) The defects are caused by the fact that the product is used in a harsh environment that is not suitable for the operation of the product.(4) The defects are caused by any force majeure including but not limited to fire, earthquake, lightning and tsunami.(5) The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.(6) The normal wear and tear, including but not limited to the normal wear and tear of the shell and the power module, shall not be covered by the limited warranty.(7) The warranty card is altered or illegible, or the product serial number recorded on the warranty card is inconsistent with the actual one imprinted or labeled on the product.In any case that is not covered by this limited warranty or should the warranty expire, Huawei shall charge for the service(s) claimed for the products if the product is still remediable. Huawei preserves the right for interpretation of this limited warranty.

Page 19: 31504920-EchoLife HG8245&HG8247 GPON Terminal Quick Start-(V100R001_02)(Chromatic)

Huawei Technologies Co., Ltd.Huawei Industrial Base

Bantian, LonggangShenzhen 518129

People's Republic of China

www.huawei.com