Upload
duonghanh
View
214
Download
0
Embed Size (px)
Citation preview
www.saswelding.com.au Ph: 02 9620 7531 WELDING
100% AUSTRALIAN MADE
& OWNED
316 STAINLESS DRAINAGE SOLUTIONS
8820 Series
5620 Series56mm Wide x 20mm Deep. Outlet diameter 38mm. Available with Square, Round and Barred grates. Length to your specifications
88mm Wide x 20mm Deep. Outlet diameter 63mm. Available with Square, Round and Barred grates. Length to your specifications
WEDGE WIRE NOW AVAILABLE50mm 75mm and 100mm
10020 Series
CUSTOM Options
8850 Series
We are happy to help you create exactly what you want please contact us if you require a customised* product.
Popular custom options are:
• 90º Mitres available • Electro polishing • Any angle can be mitred as requested for custom design • Change positioning of outlet • Tile inserts also available
*may incur additional charges
www.saswelding.com.au Ph: 02 9620 7531
88mm Wide x 50mm Deep. Outlet diameter 63mm. Available with Square, Round and Barred grates. Length to your specifications
100mm Wide x 20mm Deep. Outlet diameter 76mm. Available with Barred grates. Length to your specifications
10050 Series100mm Wide x 50mm Deep. Outlet diameter 76mm. Available with Barred grates. Length to your specifications
15050 Series150mm Wide x 50mm Deep. Outlet diameter 76mm. Available with Barred grates. Length to your specifications
BY POPULAR DEMAND NEW SIZES AVAILABLE
WaterMark
TM
Your local stockist:
The stainless steel SAS Welding uses is of grade 316 and is extremely durable and low maintenance, however surface oxidation can result over time due to chemical contact or environmental factors.
To minimise these effects and maintain premium quality of your stainless steel please visit our website www.saswelding.com.au for care & maintenance of stainless steel products.
Our link provides detailed instruction on the following:
• Routine cleaning and maintenance • What causes stainless steel to tea stain • Cleaning methods for bare stainless steel • Criteria for cleaning frequency
STAINLESS STEEL CARE & MAINTENANCE
WELDINGSAS Welding is a Sydney based welding and fabrication company. We specialise in welding Stainless, Aluminium and Steel using all types of technology including TIG, Mig, and Arc welding. Depending on your job requirements we can complete your project in our fully equipped workshop or on site with our mobile welding equipment. Call us to discuss your next project ph: 02 9620 7531
Handrails, Grates, Custom Brackets, Structural Steel, Site work, Mobile Welding, Glass Balustrades, Aluminium Louver Screens, Sheet Metal work.
ABOUT SAS WELDING
100% AUSTRALIAN MADE
& OWNED
SILICON SEALANT
SLAB
PUDDLE FLANGE
TILE BED
FALL
WATER PROOFINGMEMBRANE
TILE
GROUT
INSTALLATION INSTRUCTIONS• For long sections use silicon sealant on trough joins to prevent seepage at joints• Grate surface should be 2mm below tile surface for drainage• IMPORTANT - install with either grate in position or spacers to prevent trough sides
bending inwards
• CHECK LEVEL OF TROUGH IS FLOWING TOWARDS OUTLET (as required)• SHOULD ONLY BE INSTALLED BY PERSONS QUALIFIED TO DO SO• INSTALLER TO DETERMINE CORRECT SIZE DRAIN IS BEING USED FOR WATER FLOW