35-Numbering Devices Online

Numbering Devices Online

EPLAN Training 1



EPLAN Training 2

1 Specifying Online Numbering Format.........................................................3

2 Setting Preceding Signs in Displayed DT...................................................9

3 Numbering Devices Online ........................................................................10

3.1 Online numbering....................................................................................10

3.2 Number online and set flags ...................................................................11

4 Not Numbering Devices Online .................................................................12

4.1 Exclude device groups from numbering..................................................12

4.2 Insert devices without a DT.....................................................................14

5 Specifying Online Numbering for Macros and Copied Devices..............16

5.1 Define global settings..............................................................................16

5.1.1Insert macros and copies unchanged .................................................... 16

5.1.2Online numbering of macros and copies................................................ 17

5.1.3Online numbering of macros and copies and setting flags..................... 17

5.2 Define settings on insert .........................................................................18

6 Copying, Cutting, and Pasting Schematic Elements ...............................20

6.1 Copy or cut .............................................................................................20

6.2 Insert at a position...................................................................................22

6.3 Insert at multiple places ..........................................................................24

This functionality is only available for certain module packages. Info


EPLAN Training 3

1 Specifying Online Numbering Format

The online numbering format applies to devices that you newly place in the schematic using the menu item Insert > Symbol. It also applies to copied devices and devices in newly inserted macros.

Precondition:

You have opened a project.

Options > Settings > Projects > "Project name" > Devices > Numbering (online)

1. In the Settings: Numbering (online) dialog, click [...] next to the Numbering format field.


EPLAN Training 4

2. To create a numbering format click (New) next to the Scheme field.

3. Enter a descriptive name into the Name field and click [OK].


EPLAN Training 5

4. Change to the DT tab.

5. To allow all devices in the "General DT" device group to be numbered online, select the General DT check box.

6. Click [...] next to the General DT field.


EPLAN Training 6

7. In the Available format elements field of the DT format dialog, select the

"Counter" format element and click (Move right).

8. In the Format dialog, in the Minimum number of digits field, enter the number of positions to be used for the DT counter and click [OK].

The format element is entered into the Selected format elements field.

9. Select all of the desired format elements sequentially. Pay attention to the rules for the Online numbering format.

10. Click [OK].


EPLAN Training 7

11. To define the online numbering for all other device groups and connections, proceed in the same manner in the DT and Connection Points tabs.


EPLAN Training 8

12. Click (Save) and then click [OK].



EPLAN Training 9

2 Setting Preceding Signs in Displayed DT

The displayed DT can be displayed with a prefix, e.g. -M1 or without a prefix e.g. M1.

Precondition:


Options > Settings > Projects > "Project name" > Devices > General

1. In the Settings: General dialog, in the Set preceding sign group box, select the General functions check box.

2. Click [OK].



EPLAN Training 10

3 Numbering Devices Online

When you insert new devices into the schematic then you can define that these devices are to be automatically numbered.

A DT is determined and assigned online for every device that you insert. The counter for DT is incremented by one in the process.

Preconditions:

• You have opened a project.

• You have selected an online numbering format in which the online numbering for the selected device group is activated.


3.1 Online numbering

1. In the dialog Settings: Numbering (online) dialog, in the On symbol insertion group box, select the Number option.

2. Click [OK].

All of the symbols that you insert into the schematic are numbered.


EPLAN Training 11

3.2 Number online and set flags

1. In the dialog Settings: Numbering (online) dialog, in the On insertion of symbols group box, select the Number with flag "?" option.

2. Click [OK].

All of the devices that you insert into the schematic are numbered. The DT contains a question mark as a flag.



EPLAN Training 12

4 Not Numbering Devices Online

When you insert new devices into the schematic then you can define that these devices are not to be automatically numbered.

Precondition:



4.1 Exclude device groups from numbering

Devices that are excluded from the numbering are allocated an identifier and a counter. The counter is not incremented.

1. In the Settings: Numbering (online) dialog, click [...] next to the Numbering format field.


EPLAN Training 13

2. Select a user defined scheme from the Schemes field.


EPLAN Training 14

3. Change to the DT tab.

4. Deselect the check box for each device group that is not to be numbered online.

5. Click (Save) and then click [OK].

4.2 Insert devices without a DT

A device can be inserted without a DT. In this case, the entries for the displayed and full DT remain empty.


EPLAN Training 15

1. In the dialog Settings: Numbering (online) dialog, in the On insertion of symbols group box, select the Empty field option.

2. Click [OK].

You can now insert a device without a DT.



EPLAN Training 16

5 Specifying Online Numbering for Macros and Copied Devices

On insertion of macros and cut or copied devices, you can decide if these schematic elements should be online numbered or not.

Precondition:



5.1 Define global settings

Global settings apply project-wide to all macros placed in the schematic and to all devices inserted into the schematic from the Clipboard.

5.1.1 Insert macros and copies unchanged

1. In the Settings: Numbering (online) dialog, in the On insertion of macros and copies group box, select the Do not modify option.


EPLAN Training 17

2. Click [OK].

All of the devices that you insert via macros or copies into the schematic are inserted unchanged.

5.1.2 Online numbering of macros and copies

1. In the Settings: Numbering (online) dialog, in the On insertion of macros and copies group box, select the Number option.

2. Click [OK].

All of the devices that you insert via macros or copies into the schematic are numbered on insertion.

5.1.3 Online numbering of macros and copies and setting flags

Devices whose DT contains a flag in the form of a question mark can be subsequently renumbered independently of non-tagged devices.


EPLAN Training 18

1. In the Settings: Numbering (online) dialog, in the On insertion of macros and copies group box, select the Number with flag "?" option.

2. Click [OK].

All of the devices that you insert via macros or copies into the schematic are numbered on insertion. The DT contains a question mark as a flag.

5.2 Define settings on insert



EPLAN Training 19

1. In the Settings: Numbering (online) dialog, in the On insertion of macros and copies group box, select the With prompt option.

2. Click [OK].

When you insert devices via macros or copies into the schematic, the Insertion mode dialog opens.

3. Select the desired option from the Insertion mode dialog and click [OK].

and inserting



EPLAN Training 20

6 Copying, Cutting, and Pasting Schematic Elements

Preconditions:

• You have opened a project.

• The project contains pages in which functions have been placed.

Page > Navigator

6.1 Copy or cut

1. Double-click a schematic page in the Pages <Project name> dialog.

The schematic page is opened in the graphical editor.

2. Select the menu item Edit > Select > Area.

A rectangle hangs on the cursor.


EPLAN Training 21

3. With the left mouse button pressed, pull a rectangle around all the schematic elements that you wish to copy or cut.


EPLAN Training 22

4. Select the menu item Edit > Copy or Edit > Cut.

The schematic elements are inserted into the EPLAN Clipboard.

6.2 Insert at a position

1. In the Pages <Project name> dialog, click the schematic page where you wish to insert the schematic elements.


EPLAN Training 23

2. Select the menu item Edit > Paste.

When you move the cursor over the schematic, the schematic elements hang on the cursor.


EPLAN Training 24

3. Click the position in the schematic where the schematic elements from the EPLAN Clipboard are to be inserted.

If, in the Settings: Numbering (online) dialog, the With prompt option is selected, then the Insertion mode dialog opens.

4. Define the manner in which the schematic elements are to be numbered and click [OK].

6.3 Insert at multiple places

1. If you wish to insert schematic elements at further positions, click again in the schematic.

The selected insertion mode does not change.

2. To change the selected insertion mode, press [Esc].

The action is canceled.

3. Select the menu item Edit > Paste, and insert the schematic elements in the same manner.

In this procedure, you can again specify the manner in which the schematic elements are to be numbered, using the Insertion mode dialog.


EPLAN Training 25

�

Documents

35-Numbering Devices Online