Plant Closed

RICHARDS MACHINE TOOL COMPANY

3753 Walden Ave. in Lancaster (Buffalo), NY 14086

THURSDAY, APRIL 17thSTARTING AT 9AM

Inspection: Day Prior from 9AM - 4PM

(2) HAAS HL-6 Large Capacity CNC Lathes

DORRIES 81” SDE160 CNC/Manual Vertical Boring Mill

(2) SHIBAURA BFT-13CW2 5” Horizontal Boring Mills SHIBAURA BT-10BR 4” Horizontal Boring Mill

Large Quantity of MITUTOYO Micrometers & Gauges (10) Milling Machines TOS 25”/35” x 125” Gap Bed Engine Lathe

PUBL

IC A

UCTI

ON

2007 HAAS EC1600-3X CNC Horizontal Machining Center

MATSUURA MC-900H-63-PC25 5-AxisCNC Horizontal Machining Center

FRORIEP 105” Vertical Boring Mill

2007

1 OF 2

1 OF 2

1 OF 10

P.O. Box 369 I Ross, Ohio 45061Phone: 513/738-3311 I Fax: 513/738-0221www.myronbowling.com

2007 HAAS EC1600-3X CNC Horizontal Machining Center

DORRIES 81” SDE160 CNC/Manual Vertical Boring Mill DORRIES 68” Vertical Boring Mill

MATSUURA MC-900H-63-PC25 5-Axis CNC Horizontal Machining Center

OKK MCH-450 CNC Horizontal Machining Center FRORIEP 105” Vertical Boring Mill

(2) HAAS HL-6 Large Capacity CNC Lathes OKUMA LB15 CNC Lathe MAZAK VQC-20/50B CNC Vertical Machining Center

(2) SHIBAURA BFT-13CW2 5” Horizontal Boring Mills SHIBAURA BT-10BR 4” Horizontal Boring Mill SHIBAURA BT-8D(R) 3-1/8” Horizontal Boring Mill

2

2007

1 OF 2

1 OF 2

85” Z- Axis, #50 Taper, 1,200 RPM, 2-Axis DRO’S, Pendant ControlsSHIBAURA BT-10BR 4” HBM, Built-In 55” x 63” Rotary Table, Travels: 72” X-Axis, 60” Y-Axis, 20” Z-Axis, #50 Taper, 1,000 RPM, NEWALL 3-Axis DRO, Pendant ControlSHIBAURA BT-8D(R) 3-1/8” HBM, Built-In 35” x 41” Rotary Table, Travels: 40” X-Axis, 40” Y-Axis, 36” Z-Axis, #50 Taper, 1,000 RPM, NEWELL 3-Axis DRO, Pendant Control

VERTICAL BORING MILLSFRORIEP 105” VBM, 95” 4-Jaw Table, (2) Ram Heads, Approx. 60” Under Rail, 48 RPMDORRIES 81” SDE160 CNC/Manual VBM, 63” 4-Jaw Table, (2) Ram Heads, (Right Head Under FAGOR CNC Control), Approx. 30” Under Rail, 150 RPM, Pendant ControlDORRIES 68” VBM, 63” 4-Jaw Table, Ap-prox. 30” Under Rail, Ram Head, 150 RPM, Pendant Controls

BORING MILL ACCESSORIES

48” x 72” LUCAS Precision Airlift Rotary Table • 30” Diameter PRATT & WHITNEY Motorized Rotary Table • Large Capacity Drilled & Tapped Sub-Tables • (2) 36”D x 33”W x 53-1/2”T Base • (2) 27”D x 33”W x 47-1/2”T Top • (11) Assorted Angle Plates

CNC VERTICAL MILLWELLS-INDEX 3-Axis CNC Mill, 9” x 47” Table, Quick Change Spindle Taper, 4,200 RPM, CNC Controls

MILLING MACHINESFREZARKI Vertical Mill, 16” x 79” Table, Power Feed Table & Knee, #50 Taper, 1,300 RPM, Pendant Control(2) LAGUN FT2 Vertical Mill, 9” x 48” Power Feed Tables, Variable Spindle to 4,200 RPM, R-8 Taper, 2-Axis DRO, (1) with RiserKONDIA Powermill Vertical Mill, 9” x 42” Power Feed Table, 3,000 RPM, R-8 Taper, 2-Axis DRO(3) SHARP First Vertical Mill, 9” x 42” Tables, 2,760 RPM, R-8 Tapers, 2-Axis DROENSHU Vertical Mill, 10” x 51” Table, 3-Way Power Feeds, #50 Taper, 1,503 RPMMILLPORT Model 2 Vertical Mill, 9” x 42” Table, R-8 Taper, 5,440 RPMENSHU Universal Vertical / Horizontal Mill, #50 Taper Spindles, (2) Arbor Supports, Universal Vertical Head Attachment, 13” x 68” Table, 3-Way Power Feeds, 1,510 RPM, Pendant ControlHELIX Indexable Drive Attachment w/8” Chuck & Change GearsDAREX Model E-85/90 End Mill Sharpener w/Collets

ENGINE LATHESTOS 25”/35” x 125” Gap Bed Engine Lathe, Model SN63C, 4-Way Rapid Tra-verse, 12” to 28” Chucks, Taper Attachment, Inch / Metric Threading, 3-1/8” Bore, 1,000 RPM, Chip Guard & PanMAZAK 21” x 60” Gap Bed Engine Lathe, 29” Swing in Gap, 15” 4-Jaw Chuck, 3-1/8” Spindle Bore, Inch / Metric Threading, 1,500 RPMSTANDARD MODERN 18” x 60” Engine

Lathe, Series 4000, 15” 3-Jaw Chuck, 40-1,600 RPM, 3” Thru-Hole, Threading, Taper Attachment, Chip GuardMAZAK 18” x 34” Gap Bed Engine Lathe, 27” Swing in Gap, Model 860, 12” 3 & 6-Jaw Chucks, 3-1/8” Spindle Bore, Inch / Metric Threading, 1,500 RPMHOWA SANGYO 17” x 36” Toolroom En-gine Lathe, Model 1000, 10” 4-Jaw Chuck, Inch / Metric Threading, Thread Dial, 1,500 RPMYAMAZEN Maxturn 14” x 32” Toolroom Lathe, 8” 3-Jaw Chuck, Inch / Metric Thread-ing, Thread Dial, 1,800 RPM

PRECISION LATHESHARDINGE HLV-H 11” x 16” Precision Tool Room Lathe, Threading, 5C Collet Closer, Vari-Speed Carriage, Variable Spindle, 6” 3 & 6-Jaw ChucksTSUGAMI 8” Precision Turret Lathe, 5C Collet Closer, 8-Position Turret, Variable Car-riage & Spindle Speeds, Cut-OffHARDINGE HSL High Speed Cut-Off Lathe, 5C Collet Closer & Cross-Slide

AUTOMATIC BARFEED TURRET LATHE

MIYANO 4BC-D 200 Automatic Barfeed Turret Lathe, 2” Round Collet Capacity, 2-5/32” Hole Thru Spindle, 7-1/4” Swing Over Cross Slides, 6-Position End Working Turret, (2) Turning & Cut-Off Slides, Coolant, Bar Feed Enclosure & Controls

3

KOIKE ARONSON 48” X 48” 10,000-Lb. Tilting Power Welding Positioner

Assortment of Angle Plates FREZARKI Vertical Mill (2) LAGUN FT2 Vertical Mills KONDIA Powermill Vertical Mill

ENSHU Vertical Mill MILLPORT Model 2 Vertical Mill ENSHU Universal Vertical / Horizontal Mill

KBC SUPER TEC 13” x 29” Universal Cylindrical Grinder

CHEVALIER 10” x 20” Hydraulic Surface Grinder

ELLIOTT 8” x 20” Hydraulic Surface Grinder

CHEVALIER 6” x 12” Hand Feed Surface Grinder

1 OF 2

1 OF 3

CNC HORIZONTAL MACHINING CENTERS

2007 HAAS EC 1600-3X CNC HMC, 36”x 64” T-Slot Table, 39” x 72” Drilled & Tapped Sub-Table, #50 Taper, 6,000 RPM, Travels: 64” X-Axis, 50” Y-Axis, 32” Z-Axis, 30-Posi-tion ATC, Renishaw Touch Probe, Coolant System, Air Blow Off, HAAS CNC Control w/Remote Pulse GeneratorMATSUURA MC-900H-63-PC25 5-Axis CNC HMC, (2) 24-3/4” Pallets, .001° Rota-tion, Travels: 36” X-Axis, 29” Y-Axis, 29” Z-Axis, #50 Taper, 4,000 RPM, 50-Position ATC, Fanuc 11M CNC Control w/Remote Pulse GeneratorOKK MCH-450 CNC HMC, (2) 15-1/2” Pal-lets, Travels: 25” X-Axis, 17” Y-Axis, 15” Z-Axis, #40 Taper, 45-6,000 RPM, 30-Position ATC, OKK CNC ControlsTSUDAKOMA RNCM-301R 4th Axis Rotary Table, 12” Diameter Table

CNC VERTICAL MACHINING CENTERS

MAZAK Powercenter V-12 CNC VMC, 27” x 55” Table, Travels: 39.3” X-Axis, 19.6” Y-Axis, 19.6” Z-Axis, #50 Taper, 3,150 RPM, 20-Position ATC, Fanuc 6M CNC Pendant ControlMAZAK VQC-20/50B CNC VMC, 22” x 49” Table, Travels: 39.37” X-Axis, 19.68” Y-Axis, 12.59” Z-Axis, #50 Taper, 3,150 RPM, 24-Po-sition ATC, M-2 CNC Control, Tool Presetter

CNC LATHES(2) HAAS HL-6 Large Capacity CNC Lathes, 15” 3-Jaw Power Chucks, 44” (Ap-prox.) Distance to Tailstocks, 25” Over Cross Slide, 40” Swing Over Bed, 10-Position Tur-rets, 4-1/2” Spindle Bores, Tool Presetters, HAAS CNC Controls w/Pulse GeneratorOKUMA LB15 CNC Lathe, 8” 3-Jaw Power Chuck, 6” Swing Over Bed, 24” Distance to Tailstock, 12-Position Turret, Chip Conveyor, OSP 5000 L-G CNC ControlOKUMA LC10 CNC Chucker, 6” 3-Jaw Power Chuck, 8-Position Turret, OKUMA CNC Control

HORIZONTALBORING MILLS

(2) SHIBAURA BFT-13CW2 5” HBMs, 47” x 98” Tables, Travels: 100” X-Axis, 72” Y-Axis,

(3) SHARP First Vertical Mills

2008

4

TOS 25”/35” x 125” Gap Bed Engine Lathe

MAZAK 18” x 34” Gap Bed Engine Lathe

HARDINGE HLV-H 11” x 16” Precision Tool Room Lathe

MAZAK 21” x 60” Gap Bed Engine Lathe

HOWA SANGYO 17” x 36” Toolroom Engine Lathe

TSUGAMI 8” Precision Turret Lathe

STANDARD MODERN 18” x 60” Engine Lathe

YAMAZEN Maxturn 14” x 32” Toolroom Lathe

Assorted Inspection Equipment Large Quantity of Tool Holders

GRINDERSKBC SUPER TEC 13” x 29” Universal Cylindrical Grinder, Model LF-800G, w/Swing Down Internal Grinding Attachment, Motorized Workhead Speeds to 310 RPM, Wheel Head to 2,100 RPM, Tailstock, Cool-ant & ControlsKBC SUPER TEC 7-1/2” x 8” Cylindrical Grinder, Model CQ-412, w/Motorized Work-head, 6” 6-Jaw Chuck, Tailstock, Coolant, Universal TableKBC SUPER TEC 16” x 32” Hydraulic Surface Grinder, Model STP-30A, w/Over Wheel Dresser, Coolant, 16” x 32” Electro-Magnetic ChuckCHEVALIER 10” x 20” Hydraulic Surface Grinder, Model FSG-1020AD, w/Over Wheel Dresser, Coolant, 10” x 20” Electro Magnetic Chuck, Controls, S/N 25007ELLIOTT 8” x 20” Hydraulic Surface Grinder, Model 921, w/Walker 8” x 20” Permanent Magnetic Chuck, CoolantCHEVALIER 6” x 12” Hand Feed Surface Grinder, Model FSG-612, w/Permanent Magnetic Chuck, ControlsCINCINNATI Monoset Tool & Cutter Grinder, 5” x 36” T-Slot Table & Attachments

SAWSDO ALL 13” x 21” Automatic Horizontal Band Saw, 24” Stroke Auto Index, Hydrau-lic Vises & Discharge TableDO ALL 15” Vertical Band Saw, Auto Feed, Model U-1421, Variable Blade Speeds, Frame Tilts to 45°, Coolant & Chip PansKALAMAZOO STARTRITE 24” Vertical

Band Saw, Model 24-T-10 19” x 19” Tilt TableHITACHI Model H-16 Abrasive Cut-Off Saw, Vise & Steel Workbench

HONESSUNNEN Cylinder King CV-616 Hone, Trunnion Table, Dwell Numbers Selector(2) SUNNEN MBB-1660 & LBA666 Hones, Coolant, AG300 Precision GageLarge Assortment of Hone Tooling, Mandrels, Stones, (2) “WINONA” In-the-Block Crankshaft Grinders, Etc.

WELDINGMILLER XMT 304 CC/CV Power Supply, 300-AMP w/Wire FeederHOBART Cyber-Tig CT300 TIG Welder, 120 Series, 300-AMPLINCOLN Idealarc TM-400 Stick WelderBUG-O MPD-1000 Modular Drive Pro-grammable Shape Machine w/Weaver MDS-1005 Controller2008 Koike Aronson 48” x 48” 10,000lb capacity tilting power welding positioner, mdl HD100VF, S/N 45610

INSPECTIONCORDAX 1808 MEA CMM, 29” x 54” Granite Table, Renishaw PH8 Probe, Travels: 29.5” X-Axis, 24.6” Y-Axis, 19.7” Z-Axis, Computer, Software & PrinterEXCELLO 14” & 10” Bench Top Optical ComparatorWILSON Rockwell Hardness Tester & Others

KING Portable Brinell TesterTAFT PEIRCE 48” Bench CentersTRU-STONE 36” x 72” Granite Surface Plate, Grade AGSE Precision Counting Scale, MITU-TOYO Micrometers & Many Others, 8” x 12” Sine Plate, 10” Sine Bar & Others, Lots of Assorted Gages, Calipers, Squares, Granite Step Blocks, Parallels, Gage Blocks, Pin Sets

FORKLIFTS2006 YALE 12,000-lb. Forklift, Model GLC120, LPG, Solid Tires, 3-Stage Mast, 208” Lift, 4-Way Valve, 48” Forks2007 HYSTER 8,000-lb. Forklift, Model S80FT, LPG, Solid Tires, 3-Stage Mast, 195” Lift, 4-Way Valve, 48” Forks2001 TOYOTA 6,500-lb. Forklift Truck, Model 7FGCU32, LPG, Solid Tires, 3-Stage Mast, 187” Lift, Side Shift, 44” ForksYALE 6,000-lb. Forklift, Model G51C-060-CBN-T083, Solid Tires, 3-Stage Mast

MISCELLANEOUS(2) SPEEDAIRE 10-HP & (1) 5-HP Reciprocating Air Compressors & (1) SPEEDAIRE Air DryerTRINCO 35BP 2-Glove Dry Blast Cabi-net, Dust CollectorCLAUSING 4-Stand 7-1/4” Production Drill, Series 16SC, 56” Long TableORBIT 7” Bench Drill Press, Model 1412, 12” Diameter TableELECTRO-ARC 2DB Metal Tap Disinte-grator, 18” x 26” Table, Universal Head &

Controls10-Ton H-Frame Press, w/Elec-Draulic Control, Adjustable Rail, 39” Between UprightsCENTRAL HYDRAULICS 12-Ton Pipe Bender w/AttachmentsDouble End Grinders & Belt Sanders (HAMMOND KALAMAZOO, BALDOR, DELTA & CENTRAL MACHINERY)TORIT DONALDSON & DAYTON Dust Collectors(10) VIDMAR & LISTA Tool Cabinets, YUASA 8” Super Spacer, Large Quantity Tool Holders: CAT 50, CAT 45, BT 50 & NMTB 50, (2) BRIDGEPORT Right Angle Heads, 5C Collet Closer, Collets: R8, 5C, 2J, (2) YUASA & Other 8” 3-Jaw Divid-ing Heads, (5) WOHLHAUPTER Boring Heads, Drill Bits, End Mills, Reamers, Spade Drills, Carbide Inserts, Slitting Saws, Sanding Pads & Wheels, Deburr-ing Tools, Cutoff & Lathe Tooling, Boring Bars, Shell Mills, Collets, Electric Drills, Belt Sander, Angle & Straight Grinders, Pneumatic Impact Wrench & Drill Grinders, Mag Base Drill, Mitre Saw, Wrenches, Socket Sets, C-Clamps, Dead Blow Ham-mers, Ladders & and many other Shop Hand Tools, 1”x2”x3” Block, V Blocks, Step Blocks, 2”x4”x6” Block, V Blocks, 4”x6”x8” Block, (9) Granite & Steel Surface Plates, (10) KURT Machine Vises, (21) Machine & Bench Vises, (5) ALORIS CXA & DA Tool Post, Several 12” Rotary Tables, 24” x 24” Lapping Plate, 10” x 10” Cross Sliding Table, Blacksmith’s Anvil, Lifting Chains, Straps, Cables & Hooks, Pallet Jacks, 2-Wheel Dollies, Die Lift Cart

DO ALL 13” x 21” Automatic Horizontal Band Saw

DO ALL 15” Vertical Band Saw

KALAMAZOO STARTRITE 24” Vertical Band Saw

SUNNEN CV-616 Cylinder King Hone (2) SUNNEN MBB-1660 & LBA666 Hones

MILLER XMT 304 CC/CV Power Supply

HOBART Cyber-Tig CT300 TIG Welder

LINCOLN Idealarc TM-400 Stick Welder

TRINCO 35BP 2-Glove Dry Blast Cabinet

10-Ton H-Frame Press

BUG-O MPD-100 Programmable Shape Machine HAMMOND KALAMAZOO 12A 12” Double End Pedestal Grinder

(3) BALDOR, DELTA & CENTRAL MACHINERY Pedestal & Bench Grinders

(4) CENTRAL MACHINERY Belt & Disc Sanders

CORDAX 1808 MEA CMM WILSON & SERVICE DIAMOND Hardness Testers

EXCELLO 14” Optical Comparator

TRU-STONE 36” x 72” Granite Surface Plate

YALE 6,000-lb. Forklift 2006 YALE GLC120 12,000-Lb. Forklift COFFING 1-Ton Hoist

1 OF 2

1 OF 3 1 OF 4

5

FIRST CLASS MAILPERSORTED

FIRST CLASS MAIL U.S. POSTAGE

PAID CINCINNATI, OH

PERMIT NO. 5714

LARGE PARTS PRODUCTION / PRECISION MACHINING FACILITY

2007 HAAS EC1600-3X CNC Horizontal Machining Center

MATSUURA MC-900H-63-PC25 5-Axis CNC Horizontal Machining Center

MAZAK Powercenter V-12 CNC Vertical Machining Center

TERMS OF SALE: Copies of Terms of Sale will be posted at the auction. Additional terms may be announced during the auction. We make every effort to accurately describe each item in the auction; however, a mistake may occur. Buyers must take responsibility to thoroughly inspect the items on which they intend to bid. Each item will be sold “As is, where is.” There is absolutely no warranty or guarantee of any kind either written or implied. Occasionally, additional information may come to light regarding any and all items being sold during the auction. When this occurs the new information takes precedence.

REMOVAL & PAYMENT: Machinery removal is the responsibility of the buyer. All equipment must be removed in accordance with the specific auction timeline and terms of sale. See the specific auction web page for details. Anyone (rigger or buyer), using a powered vehicle to remove items must have a certificate of insurance on file with Myron Bowling Auctioneers in the amount of $1,000,000.00. Item removal generally begins at the conclusion of the auction and after payment in full is received by cash, wire transfer, or company check (if approved by the auction company or bank letter of guarantee). All checks should be made payable to Myron Bowling Auctioneers. Taxes will be charged unless you have provided a proper written exemption from your state. SAMPLE BANK LETTER: Dear Sirs, (BANK NAME) irrevocably guarantees payment in full to Myron Bowling Auctioneers by (BUSINESS NAME) drawn on account (NUMBER) up to the amount of $ (DOLLARS) to purchase items at your (AUCTION NAME). This letter of guarantee is valid until (MONTH, DAY, YEAR). Regards, (BANK REPRESENTATIVE, TITLE, BANK NAME).

COMPLETE TERMS & CONDITIONScan be found at myronbowling.com, or call 513/738-3311 if you have questions

TERMS & CONDITIONS

Auction conducted by:MYRON BOWLING AUCTIONEERS, INC.P. O. Box 369, Ross, Ohio 45061

PLANT CLOSED

RICHARDS MACHINE TOOL COMPANY

3753 Walden Ave. in Lancaster (Buffalo), NY

THURSDAY, APRIL 17thSTARTING AT 9am

Inspection: Day Prior from 9AM - 4PM

From Left (Northeast) out of Airport, proceed 2 miles. Turn right onto Transit Road (78S). Go 1-3/4 miles & turn left onto Walden Ave. Go 1-1/2 mile to Richards Machine on the right. Watch for auction signs.

DIRECTIONSBest Western (800) 780-72344630 Genesee Street 14225

Hilton Garden Inn (800) 445-86674201 Genesee Street 14225

Holiday Inn (888) 897-00884600 Genesee Street 14225

LODGING

BUYER’S PREMIUM: 15% ONSITE • 18% ONLINEINSPECTION: THE DAY BEFORE THE AUCTION FROM 9AM TO 4PM

Bid Online in Real Time at Register: You must register as an online bidder through Bidspotter.com, 24 hours prior to the auction start time to allow sufficient time to be approved. You’ll find the Bidspotter link on the specific auction page on our Website. Deposit: A deposit of 25% of your anticipated purchase or a bank letter of guarantee is required to bid online. Mail deposit check to: Myron Bowling Auctioneers, P.O. Box 369, Ross, Ohio 45061. Call 513/738-3311 for wire instructions. Fax your bank letter of guarantee to 513/738-0221.Approval: Once the registration process has been completed and your deposit received, you will be notified through an automated Bidspotter email, that you are approved to bid.

ALL ONLINE BIDS ARE SUBJECT TO A 18% BUYER’S PREMIUM

UNABLE TO ATTEND?

(2) HAAS HL-6 Large Capacity CNC Lathes

DORRIES 68” Vertical Boring Mill

(2) SHIBAURA BFT-13CW2 5” Horizontal Boring Mills

FRORIEP 105” Vertical Boring Mill

(10) Milling Machines

2007

1 OF 2

1 OF 101 OF 2

P.O. Box 369 I Ross, Ohio 45061Phone: 513/738-3311 I Fax: 513/738-0221www.myronbowling.com