Upload
ttibcca
View
216
Download
2
Embed Size (px)
Citation preview
CRE Technology has developed specific accessories regarding energy control: an extended range of battery chargers, alternator voltage regula-tors and magnetic pick ups.
DATA CENTer / TELECOMREDUNDANCY
Data storage buildings and net centers are growing in the world of telecommunications. Storage and protection of such datas raise the problem for high reliability and quality of power supply and requires particularly safe solutions.
To meet this demand CRE Technology has developed a combination of specific solutions, thanks to the flexibility of its high quality products and engineering application services.
The case presented here is an example of what is the most reliable in terms of power control redundancy.
3
speedgovernor
AVR
Watchdog signal fromGensys2.0 Principal
Wat
chdo
g si
gnal
from
Gen
sys2
.0 S
LAV
E
Speed out Principal
AVR outPrincipal
Speed outSlave
AVR outSlave
KM
coil
KM
KS
coil
KS
KM
Dig
ital
inpu
tJ1
5
Dig
ital
inpu
tJ1
5
WD out C5
WD out C5GCBcontrol
E5
GCBcontrol
E5
GCB coil
Canbus to otherGensys2.0 Slave
Canbus to otherGensys2.0Principal
Can
bus
inte
rGen
sys2
.0
COM 1
COM1
RemoteI/O
RemoteI/O
COM2
ECU
KM
COM2
GENSYS2.0 Principal
GENSYS2.0 SLAVE
Principal wiring only
Slave wiring only
Parallel wiring (both Slave and Principal)
Inter Gensys communication
KM
KS
Principal WD relay
Slave WD relay
G9G11
G9G11
H2H4
H2H4
The application is intended to a series of Net centres belonging to one of the giants of military and private telecommunications.
The plant consists of two 2000kVA generators running in parallel with control redundancy and manual backup operation.
Each group is equipped with 2 GENSYS 2.0 modules for redundancy:
• A first principal GENSYS 2.0 module with watchdog option
• A redundant GENSYS 2.0 module
• An additional backup system is also fitted to the cabinets for manual operation.
This application provides a guarantee of continued operation of generators even in case of complete loss of the principal control module. Control is automatically switched on-the-fly from the principal to the redundant module, instantly and without any break or impact on the power plant, regardless of the operating status of the generators.
Control can later be switched back to the principal GENSYS 2.0 module, either automatically or after the intervention of an agent on site. This gain without any cut in the power supply.
The CRE Technology solution also provides the possibility of coupling an external rental power plant of 1, 2 or 3 backup generators via the use of a MASTER 2.0 module. The flexibility of the system prevents any compatibility problem and offers a quick connection capacity.
The MASTER 2.0 allows paralleling between the site power plant and the rental power plant, either by sharing load equally or by using peak shaving operation.
CRE Technology also offered its application engineering services together with the systems in order to provide a comprehensive development and an adapted training to its customer all along that project.
• 4 GENSYS 2.0 in redundancy (2 principal units and 2 redundant units
• 1 MASTER 2.0 for rental power plant connection and paralleling to the redundant power plant
• 2 SCR Synch Check Relays for manual backup mode
• 2 PM-P power meters for manual backup operations
PRINCIPAL UNIT
REDONDANT UNIT
PRINCIPAL UNIT
REDONDANT UNIT
NET CENTER RENTAL POWER
ILS Analog load sharing linesCAN bus
All the CRE Technology products are delivered with one year warranty, and if necessary we will be happy to come on site for product commissioning or troubleshooting. The company also provides specific trainings on our products and softwares.
Our team of dedicated engineers will help you on the field or over the phone from Monday to Friday on: +33 492 38 86 86
Thanks to a 30 year experience in the paralleling system and energy control, CRE Technology continues to develop solutions to meet market increasing expectations.
Our engineers develop high technol-ogy solutions combining reliability, modularity and intuitivity. They also can customize our products to your wish.
We are currently seeking partners to represent our range of products worldwide.
Joining our team represents a great opportunity to grow and develop your business, selling, promoting and sup-porting our products.
CRE TECHNOLOGY130, allée Charles-Victor Naudin
Zone des Templiers • Sophia Antipolis 06410 BIOT • FRANCE
Tel: +33 (0) 492 38 86 82 • Fax: +33 (0) 492 38 86 83
[email protected] • www.cretechnology.com