Upload
abid-ali
View
271
Download
28
Embed Size (px)
Citation preview
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved
www.huawei.com
Internal
HUAWEI BTS3036 System Structure
ISSUE 1.0
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 2
Upon completion of this course, you will be able to:
Know the functions and features of BTS3036
Master the BTS3036 hardware structure
Master the cable connection of BTS3036
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 3
References
BTS3036 Product description
BTS3036 Installation Manual
BTS3036 Hardware description
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 4
Chapter 1 OverviewChapter 1 Overview
Chapter 2 System ComponentsChapter 2 System Components
Chapter 3 Typical configurationChapter 3 Typical configuration
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 5
Features and Functions 1
It shares the BBU, which is the central processing unit, with the BTS3036 to minimize the number of spare parts and reduce the cost.
It can be flexibly installed in a small footprint and can be easily maintained
It supports multiple frequency bands, such as PGSM900, EGSM900, and DCS1800
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 6
Features and Functions 2 It supports the GPRS
It supports multiple network topologies, such as star, tree, chain, ring, and hybrid topologies
It supports the cell broadcast SMS and point-to-point SMS.
A single cabinet supports up to 12 carriers in the maximum cell configuration of S4/4/4.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 7
Chapter 1 OverviewChapter 1 Overview
Chapter 2 System ComponentsChapter 2 System Components
Chapter 3 Signal ProcessingChapter 3 Signal Processing
Chapter 4 Typical configurationChapter 4 Typical configuration
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 8
System Architecture of BTS3036
BTS3036 system
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 9
Appearance of the BTS3036 Cabinet
Configuration Type
Width (mm)
Depth (mm)
Height (mm)
Cabinet 600 450 900
BTS3036 cabinet
Configuration Type Weight (kg)
Empty cabinet 57
Full Configuration 142
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 10
Structure of the BTS3036 Cabinet(-48V)Fully configured BTS3036 Single cabinet
(1) Double radio filter unit
(2) Fan box
(3) Baseband unit (4) Direct current distribution unit(6) Cable in/out unit
-
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 11
BTS3036 Cabinet and BoardsBoard/Module Full Name
BSBC(BBU) Universal BBU Subrack Backplane type C (2U)
UEIU Universal Environment Interface Unit
GTMU GSM Transmission and Management Unit for the BBU
UELP Universal E1/T1 Lightning Protection Unit
UBFA Universal BBU Fan unit type A (2U)
UPEU Universal Power and Environment interface Unit
DRFU Double Radio Filter Unit
DCDU Direct Current Distribution Unit
GATM GSM Antenna and TMA Control Module
Fan box Fan box
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 12
Logical Structure of the BTS3036
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 13
Common Subsystem
(1) BBU Control subsystem whose functions are implemented by the BBU
(2) DRFU RF subsystem whose functions are implemented by the DRFU
(3) DCDU Power subsystem
(4) Fan Box
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 14
1.1 Functions of BBU Provides physical ports between the BTS and the BSC for
interaction
Provides the CPRI ports for communication with the DRFU
Provides the USB port for downloading the BTS software
Provides OM channels for connection to the LMT (or M2000)
Processes UL and DL data
Provides centralized management on the entire BTS system, such as OM and signaling processing
Provides the reference clock for the entire system
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 15
1.2 Appearance and Panel of the BBU1. BBU
2. Panel of the BBU
Dimensions(mm):442×310 ×86.1(2U) Weight:≤12KgPower Type:-48V DC
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 16
1.3 Logical Structure of the BBU3036
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 17
1.4.1 Ports of the BBU3036 Power port
Port Type Location DescriptionPWR 7W2 connector 1.4.2.7.3 UPEU
Module-48 V power input
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 18
1.4.2 Ports of the BBU3036Transmission ports 1
Port Type Location Description
INSIDE DB25 male connector UELP
board
Transfers the four E1/T1 signals between the UELP and the GTMU.
OUTSIDE DB26 male connector
Provides the input and output of the four E1/T1 signals between the BBU and the BSC.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 19
1.4.3 Ports of the BBU3036Transmission ports 2
Port Type Location
Description
CPRI0–CPRI5
SFP connector
GTMU board
Provides the input and output of the optical and electrical transmission signals between the BBU and the RF module.
E1/T1 DB26 male connector
Provides the input and output of the four E1/T1 signals between the GTMU and the UELP or between the GTMU and the BSC.
FE0 RJ45 connector
A reserved port that performs the following function:Connects the BBU to a routing device in the equipment room through the Ethernet cable to transmit network information.
FE1 DLC connector
A reserved port that performs the following function:Connects the BBU to a routing device in the equipment room through the optical cable to transmit network information.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 20
1.4.4 Ports of the BBU3036 Alarm ports
Name Type Location DescriptionMON0 RJ45
connector1.4.2.7.3 UPEU Module and 1.4.2.7.4 UEIU Board
Provides the input and output of the externally collected environment monitoring signals to the GTMU according to the RS485 communications protocol.
MON1 RJ45 connector
Reserved
EXT-ALM0
RJ45 connector
Transmits the externally collected environment monitoring signals to the GTMU through communication protocols related to the dry contact.
EXT-ALM1
RJ45 connector
Reserved
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 21
1.4.5 Ports of the BBU3036 Other ports of the BBU
Port Type Location DescriptionETH RJ45
connector
1.4.2.7.5 GTMU Board
For local maintenance and commissioning
USB USB connector
A reserved port that performs the following function:Automatically upgrades the software through the USB disk.
TST USB connector
For testing of the output clock signals by using a tester
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 22
1.4.6 BBU3036 Boards and Modules
The BBU3036 boards consist of the following:
(1) BSBC Board
(2) UEIU Board
(3) GTMU Board
(4) UELP Board
the BBU3036 modules consist of the following:
(5) UBFA Modules
(6) UPEU Modules
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 23
1.4.6.1 Functions of BSBC Board Clock signal: The BSBC sends the precise clock signals provided by the
GTMU to each service processing module as reference clock.
Power input: The BSBC distributes the +12 V DC power input provided by the power module to the boards and modules.
Low-speed signal management: The BSBC provides the interface for the GTMU to monitor and manage the service board, power, backplane, and fan.
High-speed signal management: The BSBC distributes and converges information about data, control, and management of all boards in the baseband unit system
Service signal: The BSBC transfers the UL and DL baseband data of the GTMU.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 24
1.4.6.1 Slots of BSBC BoardThe BSBC is the backplane of the BBU. The BSBC provides eight board slots, two power slots, and one fan slot.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 25
1.4.6.2 Functions of UBFA Module Fan control board
(1) Processes the two-channel 12 V power input by the backplane to provide power for the fan
(2) Communicates with the GTMU to control and monitor the fan
(3) Detects and adjusts the fan speed
(4) Detects the board temperature by the built-in temperature sensor
(5)Provides the automatic reset function
Fan: performs forced heat dissipation for the entire BBU
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 26
1.4.6.2 LEDs on UBFA Module
LED Color Status Description
STATE Green Blinking twice per second
The board is not securely connected. An alarm is not generated.
Red On An alarm is generated.
Green Blinking once every two seconds
The board operates normally.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 27
1.4.6.3 Functions of UPEU Modul Supplies power to the boards, modules, and fans
Introduces environment monitoring signals to the BBU
Reports fault signals, in-position signals, and version information associated with the boards and modules
Structure and working principles of the UPEU
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 28
1.4.6.3 Ports on UPEU panel Port Type Description
MON0 RJ45 Connector
Provides the input and output of the externally collected environment monitoring signals to the GTMU
MON1 RJ45 Connector
Reserved
EXT-ALM0
RJ45 Connector
Transmits the externally collected environment monitoring signals to the GTMU through communication protocols related to the dry contact.
EXT-ALM1
RJ45 Connector
Reserved
PWR 7W2 connector
-48V power input
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 29
1.4.6.3 LEDs on UPEU panelLEDs on the UPEU
LED Color Status
Description
RUN Green On The module is functional.
Off The module is not functional.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 30
1.4.6.4 Function of UEIU Board
The universal environment interface unit (UEIU) supports multiple environment monitoring signals. The UEIU is optional. It is configured when the environment interfaces are insufficient.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 31
1.4.6.4 Ports on UEIU Port Type Description
MON0 RJ45 connector
Provides the input and output of the externally collected environment monitoring signals to the GTMU according to the RS485 communications protocol
MON1 RJ45 Connector
Reserved
EXT-ALM0
RJ45 Connector
Transmits the externally collected environment monitoring signals to the GTMU through communications protocol related to the dry contact
EXT-ALM1
RJ45 connector
Reserved
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 32
1.6.4.5 Function of GTMU Board Controls, maintains, and operates the BTS
Supports fault management, configuration management, performance management, and security management
Supports the monitoring of the fan module and power supply module
Provides port for terminal maintenance
Supports four E1 inputs
Provides CPRI ports for communication with the RF modules
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 33
1.4.6.5 Ports on GTMU Board
Port Type DescriptionCPRI0–CPRI5
SFP connector
Provides the input and output of optical and electrical transmission signals
ETH RJ45 connector
Local maintenance and commissioning
FE0 RJ45 connector
A reserved port that performs the following function: Connects the BBU to a routing device in the equipment room through the Ethernet cable to transmit network information
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 34
1.4.6.5 Ports on GTMU Board
Port Type DescriptionFE1 DLC
connectorA reserved port that performs the following function:Connects the BBU to a routing device in the equipment room through the optical cable to transmit network information
USB USB Connector
A reserved port that performs the following function:Automatically upgrades the software through the USB disk
TST USB connector
Testing of the output clock signals by using a tester
E1/T1 DB26 male connector
Provides the input and output of the four E1/T1 signals between the GTMU and the UELP or between the GTMU and the BSC.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 35
1.4.6.5 LEDs on GTMU Board LED Color Status Description
RUN Green On The board is faulty.
Off There is no power supply or the board is faulty.
Blinking once every two seconds
The board is operational.
Blinking once every four seconds
The OML link is abnormal.
Blinking four times per second
The board is loading software.
ALM Red On A fault occurs in the running board.
Off An alarm is not generated.
ACT Green On The board is operational.
Off The board is faulty.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 36
1.4.6.5 LEDs on GTMU Board
LED Color
Status Description
LIU0–LIU3
Green On A local E1/T1 alarm is generated.
Blinking four times per second
A remote E1/T1 alarm is generated.
Off This link is not used or the alarm is cleared.
CPRI0–CPRI5
Green On The CPRI link is functional.
Red On The reception of the optical module is abnormal and an alarm is generated.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 37
1.4.6.5 DIP Switch of GTMU BoardDIP Switch DIP Status Description
1 2
SW1 ON ON The E1 impedance is set to 75 Ω.
OFF ON The E1 impedance is set to 120 Ω.
ON OFF The T1 impedance is set to 100 Ω.
DIP Switch
DIP Status Description
1 2 3 4
SW2 ON ON ON ON The E1 cable is grounded.
OFF OFF OFF OFF The E1 cable is not grounded.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 38
1.4.6.5 DIP Switch of GTMUDIP Switch DIP Status Description
1 2 3 4
SW4 ON ON ON ON The E1 link can be bypassed.
OFF OFF OFF OFF
DIP Switc
h
DIP Status Description1 2 3 4
SW5 ON ON ON ON
OFF ON ON OFF The E1 link of the Level 1 cascaded BTS can be bypassed.
ON OFF ON OFF The E1 link of the Level 2 cascaded BTS can be bypassed.
OFF OFF ON OFF The E1 link of the Level 3 cascaded BTS can be bypassed.
ON ON OFF OFF The E1 link of the Level 4 cascaded BTS can be bypassed.
OFF ON OFF OFF The E1 link of the Level 5 cascaded BTS can be bypassed.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 39
2.1 Functions of DRFU It implements the direct frequency conversion technique in the transmit
channel, modulates the baseband signals to GSM RF signals. After filtering, amplifying, and combining the RF signals, the DRFU sends the signals to the antenna for transmission. The combining can be performed as required.
It receives RF signals from the antenna and performs down-conversion, amplification, analog-to-digital conversion, matched filtering, and Automatic Gain Control (AGC). Then, the DRFU transmits the signals to the BBU for further processing.
It controls power and detects the Voltage Standing Wave Ration (VSWR).
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 40
2.2 Operating Environment of DRFU
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 41
2.3 Functional structure of DRFU
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 42
2.4 DRFU PanelSpecifications of the DRFU
Item SpecificationsDimensions Front panel: 395.2 mm (L)
× 70.6 mm (W)
Working voltage -48 V power input
Power consumption (heat consumption)
Maximum power consumption: 450 W
Weight 12 kg
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 43
2.5 LEDs on DRFULED Status Meaning
RUN On The power input is normal, but the BBU is faulty.
Off There is no power supply or the module is faulty.
Blinking once every two seconds
The module is functional.
Blinking four times per second
The module is loading software or is not started.
ALM On A fault alarm is generated.
Off No alarm is generated.
ACT On The module is functional and is correctly connected to the BBU.
Off The connection with the BBU is not established.
Blinking once every two seconds
The DRFU is being tested on the Site Maintenance Terminal.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 44
2.6 LEDs on DRFU LED Status Meaning
VSWR Off (red) No VSWR alarm is detected.
Blinking once every two seconds (red)
The VSWR alarm is generated on only the ANT2 port.
Blinking four times per second (red)
The VSWR alarms are generated on the ANT1 and ANT2 ports.
On (red) The VSWR alarm is generated on only the ANT1 port.
CPRI0 On (green) The CPRI link is functional.
On (red) The interface module fails to receive signals.
Blinking once every two seconds (red)
The CPRI link has a loss-of-lock error.
CPRI1 On (green) The CPRI link is functional.
On (red) The interface module fails to receive signals.
Blinking once every two seconds (red)
The CPRI link has a loss-of-lock error.
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 45
2.7 Ports on the DRFU panel Type Connector Ports Description
Port for transceiving RF signals
N female Connector ANT1 Used in connection to the antenna Subsystem
ANT2
CPRI port SFP female connector CPRI0 Used in connection to the BBU, or in connection to the upper-level cascaded DRFU
CPRI1 Used in connection to the lower-level cascaded DRFU
Port for transmitting RF Signals between DRFUs
QMA female connector
RX1 in Input port for diversity signals in antenna channel 1
RX1 out
Output port of diversity signals in antenna channel 1
RX2 in Input port for diversity signals in antenna channel 2
RX2 out
Output port of diversity signals in antenna channel 2
Power port 7W2 power connector PWR Receives power input
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 46
3.1 Function of DCDU (10 Outputs) The DCDU provides one input and 10 outputs and distributes
the -48 V DC power to the BBU, DRFU, and fan box in the cabinet.
DCDU (10 outputs)
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 47
3.2 Specification of DCDU(10 Outputs)Item Specifications
Dimensions Module: 442.0 mm (W) x 42.0 mm (H)
Weight ≤ 3kg
Working voltage Normal value -48 V DC
Permissible Range -38.4 V DC to -57 V DC
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 48
3.4 Panel of DCDU (four outputs)
Name Label DescriptionPower input terminal
NEG(-) DCDU low level input terminal
RTN(+) DCDU high level input terminal
Power output port
SPARE2, SPARE1, BBU, FAN, and RFU5-RFU0
Power ports supplying the 10 outputs of power to the BBU, DRFU, GATM, and fan box
Power switch
SPARE2, SPARE1, BBU, FAN, and RFU5-RFU0
Power switch controlling the 10 outputs for the BBU, DRFU, GATM, and fan box
Alarm output port
SPD ALM Dry contact alarm output port
www.huawei.com
Thank You