Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
XC-3D55 System
The Apex Instruments flow measurement systems are designed to perform flow measurement sampling in accordance with US EPA Method 2, 2F, and 2G. A typical system comprises of the XC-3D55 console housed in a portable yet rugged injection molded case, a lightweight sample line with Type S pitot, and a three-hole 2G pitot or five-hole 2F pitot with 2” oversheath of specified length. The Apex Instruments flow measurement system has the essentials required to determine stack gas velocity and volumetric flow rates from a stationary source and is contained in a compact and rugged design.
3D FLOW MEASUREMENT
Flow Measurement System KitsXC-3D55 Flow Measurement Console
Method 2G and 2F Recommended Parts List
Quantity Part Number Description1 XC-3D55 3-D Flow Measurement Console
1 (for Method 2G) 2DPT2 3 Hole Prism-shaped Directional Pitot with 2 ft. Sheath
1 (for Method 2F) 3DPT2 5 Hole Prism-shaped Directional Pitot with 2 ft Sheath
1 32PTX- Probe Extension, 2” Diameter, Stainless Steel, 10 feet length
1 PF-46XT32S Port Flange with Extension, Flange Fits, 4 & 6 in. Ports
1 32M/32B-B 2 in. Bored Brass Bushing, 2 in. MNPT with 2.035 in. Bore
1 PG-32S2 in. Packing Gland, SS Body & Nut, 2 in. MNPT, PTFE ferrule included
1 PT-CAL-W2GB 2D Pitot Wind Tunnel Calibration, 60 & 90 fps
1 UINC-3D- 3-D Umbilical Cord, SpecifyLength in feet, Inclinometer Pod
1 U-PTX- 2” Dia. Pitot Sheath Extension, See Legend below for specifics
32M/32B-B
PF-46XT32S
PG-32S
32PTX-
U-PTX-(Specify Length in Feet,
See Chart on Right)
UINC-3D-(Specify Length in Feet)
OR
2DPT2 3 hole Pitot Head (for Method 2G)
3DPT2 5 hole Pitot Head (for Method 2G)
The XC-3D55 is designed for conducting flow measurement in accordance with EPA methods 2, 2F, 2G, and 2H. The console contains 2 pressure transducers with Digital Displays for measuring the Total velocity and the pitch pressure component, a bi-directional “Null” Magnehelic and inclinometer for measuring the yaw angle and a temperature display for the stack temperature. The console can be coupled with a type “S” or 3-hole prism pitot for Method 2G; or a 5-hole Pitot for Method 2F along with the inclinometer pod and integrated umbilical.
Main Power Switch
Probe Temperature Display
Velocity Pressure Display
Pitch Pressure Display
IEC Power Input Receptacle
Yaw Null Magnehelic
Yaw Angle Display
Probe Connection Quick Connects
Probe Temperature Thermocouple connection
800-882-3214 or 919-557-7300Website: www.apexinst.com / Contact: [email protected]
Flow Audit Accessories
Apex Instruments204 Technology Park Lane,
Fuquay Varina, NC 27540 USA
Flow System Recommended Audit Accessories
Digital Hand-Held Manometer 0-28 inch H2O Selectable Range English/MetricDHM-M100
Digital Display Reference Incli-nometerM5C-4Mounting BracketM5C-4-16
Squeeze Bulb PumpA-350
Calibration PumpGenerates Pressure and Vacuum, NIST 0” to 5” H2OA-396A
1/8ID X 1/4OD Tubing,Polyurethane, Sold by the FootTPOE-4/2NA
Probe Clamp, 2 halvesCLP-2P
Female Quick Connect with CapQC-F4-SS
Male Quick ConnectQC-M4-SS
Probe Leak Check PlugsRed 40025K22Blue 40025K23
Thermocouple SimulatorM5C-VA710