-
Applies to: SLM, SLSLaser Cladding & EBMPatent No.
201410693232.X
Tradecore Limited
Presents YB Powder
Metal Powders for Additive Manufacturing
Rapid Prototyping Services&
-
Example 3D Printing Special Powder
Material Properties
Chemical
Composition
Fe (balance) Al (0.05 - 0.15 wt-%)Ni (17 - 19 wt-%) Ti (0.6 -
0.8 wt-%)Co (8.5 - 9.5 wt-%) Cr, Cu (each0.5 wt-%)Mo (4.5 - 5.2
wt-%)Mn, Si (each0.1 wt-%)C (0.03wt-%) P, S (each0.01 wt-%)
Density 8.0 - 8.1 g/cm
Granularity -250
Sphericity 98%
Recommended thickness 30, 40, 50m
Bulk density 56%
Relative density of
formed parts
Close to 100 %
Tool Steel Powder18Ni300
Chemical
Composition
Al (balance) Mg (0.02 - 0.45 wt-%)Si (9.0 11. 0 wt-%) Ni (0.05
wt-%)Fe (0.55 wt-%) Mn (0.45 wt-%)Cu (0.05 wt-%) Zn (0.05wt-%)Ti
(0.15 wt-%) P, S (each0.01 wt-%)
Density 2.67 g/cm
Granularity -250
Sphericity 96%
Recommended
thickness
30, 40m
Bulk density 59.3%
Relative density of
formed parts
Close to 100 %
Aluminum PowderAlSi10Mg
Ti (balance) , O (< 1600 ppm)Al (5.5 - 6.75 wt-%) , N ( <
500 ppm)
V (3.5 - 4.5 wt-%), H ( < 150 ppm)
Fe ( < 3000 ppm)
Density 4.40 g/cm
Granularity -250
Sphericity 97.5%
Recommended
thickness
30, 40m
Bulk density 57.7%
Relative density of
formed parts
Close to 100 %
Titanium PowderTC4
Fe (balance) Si (
-
Introduction
13/07/2015 www.trcore.com 3
-
YB Powder
13/07/2015 www.trcore.com 4
By utilizing patented gas atomization technology, the finest
powders can be produced with perfect spherical sizes up to 20u
The YB Powders range covering materials in many types ,
with more than 20 different materials, for example:
Stainless Steel SS316,SS420L, toolsteel, titanium, aluminum,
tungsten, all kind of alloys (nickel, cobolt, copper, etc.) and so
much more.
-
SAMPLES
13/07/2015 www.trcore.com 5
-
Rapid Prototyping Services
13/07/2015 www.trcore.com 6
Togeth with YB Powder, Tradecore Ltd. are also offering to help
to 3D-print objects in the different powders we are
offering.
All objects will be printed with professional machines and all
objects will be measured and quality checked with
international tools.
-
3D Printed Objects
13/07/2015 www.trcore.com 7
-
YB Powder
13/07/2015 www.trcore.com 8
Tradecore Ltd. is located in Hong Kong and act as international
sales agency and customer support for the YB Powder brand.
All material are manufactured and shipped from Mainland
China.
If you want something 3D Printed with the YB powder we can also
arrange that. Please contact us with your request.
-
Email: [email protected]: www.trcore.com
