PricelistAs of 01/01/2019

3D Printingwith PAssion

eng

2 3

services

Implant planningBasic price implant planning € 238,00

per planned implant (extra) € 26,90

We plan your implants for you and find the best possible position for the intended implant – from a surgical and a prosthetic point of view.After your approval, we produce the drilling template or stent and provide the appropriate drilling slee-ves so that you can place your implants safely and with great precision. Our dental technicians will be happy to plan more complex cases for you, with virtual tooth extractions to provide immediate restorations, and produce bone reduction templates for osteoplasties. (surcharges apply)

The basic price includes importing of Dicom Data, segmenting of bone and teeth and matching of stl data, the aligning of the scan and the analysis.

Aligner planningAligner planning light per jaw € 108,00

Aligner planning comfort max. 3 series (9 splints) € 550,00

each additional series (3 spints/series) € 165,00

retainer splint € 62,70

We will be happy to plan patient cases, print setup models and manufacture dental splints for you. You can choose between the following variants:Aligner planning “light”This variant includes the planning, the printing of the models will be charged extra.. You can then manu-facture the splints in-house.Aligner planning “comfort”We plan the entire course of aligner therapy for you, print setup models and manufacture the splints for you.

MoDel Designing unD PrePArAtion

preparing of Atlantis core Files per abutment preparing of Atlantis core Files for Model Builder in an external software.

€ 14,90 per unit

send data per wetransfer € 7,90

preparing bad scan datencutting scans, closing holes, smoothing polygon mesh and exporting as new stl file

€ 25,00 per jaw

convert data in stl format € 20,00

Design in modelbuilder implantmodel € 9,90

Design in modelbuilder crowns and bridges € 7,90

Design in modelbuilder mastermodell/uncut € 5,90

Design individual impression tray € 15,00

cAD-construction digital splint € 30,00

cAD- construction partial denture € 50,00

DentAl ProDuctsCrown and bridge models, saw-cut models stl data ready

for printing

raw scandata

for design

Model for crowns and bridges Quadrant € 29,00 € 36,90

Model for crowns and bridges Quadrant+ € 34,00 € 41,90

Model for crowns and bridges Full arch € 37,00 € 44,90

each additional die € 2,70

The basic model is a full model with a wall thickness of 2 mm, filled with support material on the inside.Included: Model of the opposing jaw with all prepared dies and a removable neighbouring tooth.

Colour: Model, beige; dies, ivory (standard) or grey and similar to Vita A3 (optional)Extras: Removable soft gingival mask (surcharges apply), control model “small” printed in HQ, max. 6 units (surcharges apply)Print mode: Model, HQ 0,016 mm (Polyjet); dies, 0,010 mm (SLA) Design parameters: 3D medical print parametersProduction time: 1–3 working days

Bracket placementBracket placement per jaw € 108,00

We take care of the precise positioning of the brackets and the design of the transfer splint for transfer-ring and setting the brackets in their correct position. This will let you minimize errors compared to the direct technique, work more efficiently and offer shorter treatment times.Once you have approved the planning result, we will construct a three-part transfer splint (frontal, 2 x lateral) for each jaw to facilitate the insertion of the brackets and the removal of the splint.

Crown/bridge models, uncut stl data ready

for printing

raw scandata

for design

Model for crowns and bridges uncut Quadrant € 26,00 € 31,90

Model for crowns and bridges uncut Quadrant+ € 32,00 € 37,90

Model for crowns and bridges uncut Full arch € 35,00 € 40,90

Model for crowns and bridges uncut small € 17,50 € 23,40

The basic model is a full model with a wall thickness of 2 mm, filled with support material on the inside.Included: Model of the opposing jaw.

Colour: BeigePrint mode: 0,016 mm (Polyjet)Design parameters: 3D medical print parameterProduction time: 1–3 working days

4 5

DentAl ProDucts

Master models stl data ready

for printing

raw scandata

for design

Master model (incl. antagonist und 3-Pin-fixation) € 38,00 € 43,90

The basic model is a full model with a wall thickness of 2 mm, filled with support material on the inside.Included: Model of the opposing jaw.

Colour: BeigePrint mode: 0,016 mm (Polyjet)Design parameters: 3D medical print parameterProduction time: 1–3 working days

Implant models stl data ready

for printing

raw scandata

for design

implant model Quadrant € 29,00 € 38,90

implant model Quadrant + € 34,00 € 43,90

implantatmodell Full arch € 37,00 € 46,90

removable gingival mask € 11,00 € 11,00

The basic model is a full model with a wall thickness of 2 mm, filled with support material on the inside.Included: Model of the opposing jaw with all prepared dies and a removable neighbouring tooth (gingi-val mask available, surcharges apply).

Colour: Model, beige; dies, ivory (standard) or grey and similar to Vita A3; gingival mask, pinkExtras: Removable soft gingival mask (surcharges apply)Print mode: Model, HQ 0,016 mm (Polyjet); dies, 0,010 mm (SLA); gingival mask, 0,030 mm(Polyjet)Design parameters: 3D medical print parameterProduction time: 1–3 working days

Test dummies for implant work stl data ready

for printing

raw scandata

for design

test dummies for implant work € 30,00 *

* Not available

To check the impression and aesthetics of anatomical designs.

Cleaning: The cleaning and post-curing of biocompatible materials is subject to stringent manufacturer requirements, which we comply with fully. Colour: Similar to Vita A3Print mode: 0,050 mm (DLP)Design parameters: Not specifiedMaterial: The biocompatible material has been certified as a class IIa medical device. The product speci-fication sheet is available for download on our website.Production time: 1–3 working days

Custom impression trays stl data ready

for printing

raw scandata

for design

custom impression trays € 17,00 € 32,00

For analogue impression-taking for implant restorations or complete denture, among other uses.

Cleaning: The cleaning and post-curing of biocompatible materials is subject to stringent manufacturer requirements, which we comply with fully.

Colour: BluePrint mode: 0,100 mm (DLP)Design parameters: Minimum tray thickness, 2,5 mm; impression material gap, 1,5–3,0 mmMaterial: The biocompatible material has been certified as a class I medical device. The product specifi-cation sheet is available for download on our website.Production time: 1–3 working days

ELOS Accurate® Models stl data ready

for printing

raw scandata

for design

elos accurate® Model Quadrant € 66,00 €75,90

elos accurate® Model Quadrant+ € 71,00 € 80,90

elos accurate® Model Full arch € 76,00 € 85,90

The basic model is a full model with a wall thickness of 2 mm, filled with support material on the inside.Included: Model of the opposing jaw with all prepared dies and a removable neighbouring tooth as well as an Elos model analogue and one gingival mask per jaw.

Colour: Model, beige; dies, ivory (standard) or grey and similar to Vita A3; gingival mask, pinkPrint mode: Model, HQ 0,016 mm (Polyjet); dies, 0,010 mm (SLA); gingival mask, 0,030 mm (Polyjet)Design parameters: 3D medical print parameterProduction time: 1–3 working days

Cast-metal frameworks stl data ready

for printing

raw scandata

for design

Partial dentures printed € 45,00 € 95,00

Partial dentures printed and cast € 90,00 € 140,00

Printed components for cast-metal frameworks have been specially developed for intraoral scans, but also have their advantages in analogue impressions.

Colour: Printed, clear; cast, metallicPrint mode: 0,030 mm (SLA)Material, printed: Special fully calcinable resin materialMaterial, cast: Remanium GM 800+. The product specification sheet is available for download on our website.Production time: Printed, 1–4 working days; cast, 2–5 working days

6 7

Splint therapy stl data ready

for printing

raw scandata

for design

occlusal splint € 50,00 € 80,00

Michigan splint € 50,00 € 80,00

nti splint € 30,00 € 60,00

Bleaching splint € 50,00 € 80,00

Cleaning: The cleaning and post-curing of biocompatible materials is subject to stringent manufacturer requirements, which we comply with fully.

Colour: blue transpa or clear- yellow transpaPrint mode: 0,050 mm (DLP)Design parameters: Distance to teeth, 0.05 mm; retained undercuts, 0.07 mmMaterial: The biocompatible material has been certified as a class IIa medical device. The product specification sheet is available for download on our website.

Bracket transfer splints stl data ready

for printing

raw scandata

for design

Bracket transfer splints € 95,00 per jaw € 125,00 per jaw

* Not available

The splints are supplied in three parts per jaw (frontal, 2 × lateral) to facilitate insertion of the brackets and removal of the transfer splint. On request, splints can also be designed and supplied in one part for each jaw.Printed in two different hardnesses for a better and exacter placement on the teeth.

Cleaning: The cleaning and post-curing of biocompatible materials is subject to stringent manufacturer requirements, which we comply with fully.Colour: Clear transparentPrint mode: 0,030 mm (Polyjet)Design parameters: Distance to brackets, 0.01 mm; distance to teeth, 0.05 mmMaterial: The biocompatible material has been certified as a class I medical device. The product specification sheet is available for download on our website.

Aligner models, dental arch stl data ready

for printing

raw scandata

for design

Alignermodel dental arch € 24,00 *

* Not available

The basic model is a fully printed model.

Colour: BeigePrint mode: 0,016 mm (Polyjet)Design parameters: Not specifiedProduction time: 1–3 working days

Designs for pressing pressable ceramics stl data ready

for printing

for veneers, crowns, inlays, onlays, overlays € 9,90 per unit

The designs are being delivered with a pressing sprue with a length of 5–8 mm and a thickness of 3 mm already installed. Combination of four parts to one pressing “tree” (), consistent with e.max system- surcharge per pressing tree € 15,00

Colour: clearExtras: Combination of four parts to one pressing “tree” (surcharges apply)Print mode: 0,030 mm (SLA)Material: Special fully calcinable resin materialProduction time: 1–3 working days

Master models for orthodontics stl data ready

for printing

raw scandata

for design

Master models for orthodontics € 39,90 € 45,80

The basic model is a full model with a wall thickness of 2 mm, filled with support material on the inside.Included: Model of the opposing jaw.

Colour: BeigePrint mode: 0,016 mm (Polyjet)Design parameters: Not specifiedProduction time: 1–3 working days

Provisional crowns, veneers, try-ins, mock-ups stl data ready

for printing

Provisional crowns, veneers, try-ins, mock-ups € 9,90 per unit

Thanks to new materials we are now able to print provisional crowns, veneers, bridges and more.

Cleaning: The cleaning and post-curing of biocompatible materials is subject to stringent manufacturer requirements, which we comply with fully. Colour: Similar to Vita A3Print mode: 0,050 mm (DLP)Design parameters: As with milled constructions; no milling radius correction is requiredMaterial: The biocompatible material has been certified as a class IIa medical device. The product specification sheet is available for download on our website.Production time: 1–3 working days

ProDucts oF orthoDontics

DentAl ProDucts

NEW

NEW

NEW

8 9

Magnetic screws

Magnetic screws, 20 pcs. € 59,00

For screwing into 3D printed models to use with 3DMP Splitcast Systems.Use hexagon screwdriver. Reusable

Colour: MetallicPresentation: Pack of 20Material: Stainless steel

3Shape articulator

3shape articulator € 160,00

A very useful part of the digital workflow.Models are easy to mount on this articulator without screws or plaster.The occlusion – and especially lateral movements – can be checked very easily.The base can be designed for quadrant models but also for full-arch models

Colour: MetallicManufacturer: 3Shape

iTero articulator

itero articulator € 130,00

A very useful part of the digital workflow.Models are easy to mount on this articulator without screws or plaster.The occlusion – and especially lateral movements – can be checked very easily.The base can be designed for quadrant models but also for full-arch models

Colour: MetallicManufacturer: Cadent iTero®

useFul ProDuctsProDucts oF surgicAl

Digital drill template stl data ready

for printing

raw scandata

for design

Digital drill template € 89,00 see services

We deliver the templates ready for use, with titanium sleeves already in place if the planned implants require this. (surcharges apply for sleeves)

Cleaning: The cleaning and post-curing of biocompatible materials is subject to stringent manufacturer requirements, which we comply with fully.

Colour: Clear transparentPrint mode: 0,030 mm (Polyjet)Design parameters: Distance to teeth, 0.15 mm; sleeve offset, 0.03 mmMaterial: The biocompatible material has been certified as a class I medical device. The product specification sheet is available for download on our website.

Digital drill template, autoclavable stl data ready

for printing

raw scandata

for design

Digital drill template, autoclavable € 98,00 see services

This material is approved for high-temperature sterilization. You can sterilize the template in any com-mercial or Statim autoclave.

Colour: Clear orange before sterilization, clear yellow after sterilizationPrint mode: 0,050 mm (DLP)Design parameters: Distance to teeth, 0,10 mm; sleeve offset, 0.03 mmMaterial: The biocompatible material has been certified as a class I medical device. The product specification sheet is available for download on our website.Sterilization: 15 minutes at 121°C or 3 minutes at 138°C

3DMP Splitcast

3DMP splitcast, 12 pcs. € 240,00

3D printed splitcast plates for all available artikulators.Makes the dental technician´s work much easier.incl. Neodymium magnet, a stainless material, which guarantees a permanent magnetism. Reusable

Colour: Beige or magentaPrint mode: 0,016 mm (Polyjet)Presentation: Pack of 12Magnet: Neodymium 2.3 kg

useFul ProDucts

NEW

NEW

NEW

10 11

trAining MoDels

Preparation and impression models

Preparation and impression models € 82,00

dentate maxilla with removable teeth 17 to 27.Teeth with a natural anatomy, printed in composite resin in a colour similar to Vita A3. The basic model has a hard core and a soft pink gingival mask above it.

This allows students to displace the gingiva by inserting retraction cords after the preparation is com-plete.The student can then use the intraoral scan to examine and evaluate the results of the preparation and the digital impression.This material can be easily milled with diamond cutters.Also, the material can be easily scanned with any contemporary intraoral scanner.

This model is reusable to a limited extent. Teeth 17 to 27 can be re-ordered separately as a set,We can customize your models with your logo on request (surcharges apply)

designed by 3Dmedicalprintdesigned by 3Dmedicalprint

Composite-resin training models

composite-resin training models € 82,00

Dentate maxilla with removable teeth 17 to 27.Teeth with a natural anatomy, printed in composite resin in a colour similar to Vita A3.The printed, pre-prepared teeth bond very well with all commercially available composite materials.The basic model has a hard core and a soft pink gingival mask above it.The creation of partial matrices and/or wedges can be practiced as well as the actual filling.

This model is reusable to a limited extent. Teeth 17 to 27 can be re-ordered separately as a set,We can customize your models with your logo on request (surcharges apply)

Prepared teeth: Site 17: Occlusal restoration/Site 16: Mesiopalatal/mesiobuccal cusp build-up / Site 14: Distal contact point restoration/Site 13: Edge build-up/Site 21: Mesial edge build-up/Site 24: MOD restoration/Site 25: MOD restoration

PresentAtion MoDels

Demo- and presentation model in Zirconia

Zirconia maxilla € 895,00

Zirconia mandible € 1.299,00

Zirconia maxilla+mandible € 1.990,00

Demo- and presentation model in resinresin maxilla € 475,00

resin mandible € 829,00

resin maxilla+mandible € 1200,00

These models, which are particularly suitable for patient information, illustrate all indications in crown and bridge prosthodontics.The specially designed mandible makes the difference between an implant restoration and a three-unit bridge very clear and obvious for any patient.Choose between monolithic stained and glazed crowns, bonded to titanium bases in zirconia, printed and polished crowns, glued on titanium sleeves already glued in resin or with no prosthetic devices Delivered with laboratory analogues and a gingival mask at site 36.We can customize your models with your logo on request (surcharges apply)

maxilla Site 16: Removable die, prepared for MOD inlay Site 12: Removable die, prepared for veneer Site 11: Removable die, prepared for crown Sites 24, 26: Removable dies, prepared for bridge

manible Site 36: Abutment on a Straumann WN Implant Abutment bonded on titanium base, with screw Site 36: Cemented crown for abutment 36 Site 32: Screw-retained crown on a Dentsply Astra EV 3.0 implant Screw-retained crown, bonded to a titanium base, with screw Site 45: Screw-retained crown on a Nobel CC RP implant Screw-retained crown, bonded to a titanium base, with screw Site 44, 46: Removable dies Bridge 44, 45, pontic 46

NEW NEW

Aesthetic composite training models

Aesthetic composite training models € 176,00

Dentate maxilla with removable teeth 17 to 27.Teeth 13 to 23 are milled from a multi-layer composite. This means a natural layering of the cervical, den-tin and incisal aspects, yielding a very natural model for aesthetic anterior fillings.The basic model has a hard core and a soft pink gingival mask above it.

This model is reusable to a limited extent. Teeth 17 to 27 can be re-ordered separately as a set,We can customize your models with your logo on request (surcharges apply)

Prepared teeth: Site 13: Edge build-up/Sites 12 and 22: Incisal lengthening/Site 21: Mesial edge build-up/Site 23: Edge build-upThe model is supplied with a back wall to help model the desired anatomical shape.

Implant training models with optional drill template

implant training model, with optional drill template € 108,00

This model lets you practice implant insertions and to train in training courses.The model is designed so that an anterior implant can be placed at site 11 and posterior implants at sites 25, 26 and 27.The thickness of the bone in the posterior region is 13 mm. Reconstructed maxillary sinus with a Schnei-derian membrane of 0,35 mm thickness.The soft gingival mask can also be used to practice the incision and subsequent suturing of the soft tis-sue. The soft gingival portion can be separated from the “bone” with a raspatory, just as in a clinical case.You can order the model with a drill template. By default, implants are been pre-planned at sites 11, 25 and 27. Other implant sites for your drill template possible (surcharges apply).We can customize your models with your logo on request (surcharges apply)

All models available in full print or HD quality (printing mode: 0,010 mm, surchages apply); single jaw model minus 30% from normal price, Prototypes: pricing after looking into the print data; All prices without tax. All pictures are symbolic, products may vary; Typing- and setting mistakes and other errors cannot be excluded and are therefore reserved.

Kraimsthalstr.1, A-4860 Lenzing, phone: +43 664 1314270, mail: office@3dmedicalprint.com, www.3dmedicalprint.com