Upload
dadiono-st
View
77
Download
5
Embed Size (px)
Citation preview
3G XL INITIAL TUNING 2011DRIVE TEST SETUP
KPI INITIAL TUNING DRIVE TEST XL
Active Measurement
Drive Test Date
Functionality Stationary Test (10 times) Sec 1 Sec 2 Sec 3 Ref
Voice call short (30s dedicated 5s idle)
Video call Short (30s dedicated 5s idle)
HSDPA Short download (5MB)
EUL Short upload (1MB)
HSDPA Max Throughput**
EUL Max Throughput**
Coverage Plot (RSCP and EcNo) Sec 1 Sec 2 Sec 3
Idle Mode
Mobility Test Sec 1 Sec 2 Sec 3
SHO***
IRAT HO
**HSDPA & EUL throughput provided for information only
***SHO would be perform on inter site HO but in case there's no 3G target site, softer HO would be use
Site Audit Sec 1 Sec 2 Sec 3
Azimuth
Tilt (E/M)
Height
DT Tools Need
• TEMS Inv 10.0.1 for check HSDPA&EUL capable
• SE K800i TEMS 1 unit• Scanner Pctell or SE C702 TEMS 1 unit• Sierra Datacard with min. chipshet MSM7200
with external antenna• UE Terminating 1 unit• Simcard Broadband 1 unit and voice 1 unit
Drive Test Scenario• 1.STATIONARY• Round1 : - MS1 VOICE SHORT (30s / 5s x10 times) 1 logfile/sector
- MS2 HSDPA SHORT DOWNLOAD 5 MB (ftp npf server 10 times), IDLE 5 second 1 logfile/sector
• Round2 : - MS1 VIDEO SHORT (30s / 5s 10 times) 1 logfile/sector - MS2 HSUPA SHORT UPLOAD 1 MB (ftp npf server 10 times), IDLE 5 second 1 logfile/sector
• Round3 : - MS1 HSUPA LONG UPLOAD (get peak upload troughtput) 1 logfile/sector capture+DU meter min 1Mbps - MS1 HSDPA LONG DOWNLOAD (get peak download troughtput) 1 logfile/sector capture+DU meter min 2.4Mbps(E1) and 6.8Mbps (IP)
Drive Test Scenario• 2. MOBILITY• Round1 : SHO INTERCELL (if no route INTRACELL) bothway 1
logfile/sector, MS1 Voice Long• Round2 : IRAT HO 1 logfile/sector, MS1 Voice Long
• Round3 : Mobility Scanning on define route MS1 K800i/IDLE Locked 3G & MS2 C702 Scanner/Pctell
Note: for F1 XL use UARFCN 10763 when scanning
Initial Tuning Drive Test Work Flow
Drive Test Setup Source
• Maps• MCOM • CellFile • Route (define by DT Team)• Command Sequence• Template export and plot Mapinfo• Workspace TEMS
All_IT_XL_Template.rar
Comseq.rar
3G_XL_BDG_20110211.rar 3G_XL_JABO_20110211.rar
Mcom 3G XL WCDMA 21 Feb 2011 REV.B.rar
XL_3G_2011_INITIAL_TUNING.rar
Drive Test Report
• Capture coverage Plot Mapinfo Scanner (*.JPG file)
• Capture Troughput HS DL-UL (*.JPG file)• Excel file summary R1&R2• Word file DT Report
3G_PTIMURAYAN_R1_Voice&HS DL.rar3G_PTIMURAYAN_R2_Video&HS UL.rar
TEMPLATE_REPORT_V174G_3G_PTIMURAYAN_Rev.D.rar
Compile DT Report/covplot
Fill In data(General Site Information)
General Site Information
Site ID 341A218G
RNC RNJKT04
RF Team Arif D
DT Team Suherman
DT Measurement Devices
K800i
Sierra 880/881
PCTell
TRM Use IP
Site Configuration XL Networks 20110307.rar
Active Measurement
Functionality Stationary Test (10 times) Sec 1 Sec 2 Sec 3 Ref
Voice call short (30s dedicated 5s idle) OK OK OK 100%
Video call Short (30s dedicated 5s idle) OK OK OK 100%
HSDPA Short download (5MB) OK OK OK 100%
EUL Short upload (1MB) OK OK OK 100%
HSDPA Max Throughput** (Mbps) 5.3 5.1 5.1 Vary
EUL Max Throughput** (Mbps) 1.1 1.0 1.0 Vary
Coverage Plot (RSCP and EcNo) Sec 1 Sec 2 Sec 3
Idle Mode OK OK OK
Mobility Test Sec 1 Sec 2 Sec 3
SHO*** OK OK OK
IRAT HO**** OK OK OK
Active MeasurementDrivetest was performed on 03/08/2011 with result as follows.
Site Audit
Site Audit Sec 1 Sec 2 Sec 3
Azimuth 70 210 330
Tilt (E/M) 4/1 4/1 5/0
Height 19 19 19
Location (long – lat) 106.71695 -6.11259
Statistics
Sector Attempt SuccessSuccess Rate
(%)
1 10 10 100
2 10 10 100
3 10 10 100
HS&EUL Calculation
Sector Attempt SuccessSuccess Rate (%)
Avg Throughput
(kbps)
Max Throughput
(Mbps)
1 10 10 100 4860.59 5768.78
2 10 10 100 5026.76 6067.48
3 10 10 100 3634.96 5436.75
Sector Attempt SuccessSuccess Rate (%)
Avg Throughput
(kbps)
Max Throughput
(Mbps)
1 10 10 100 681.01 1221.92
2 10 10 100 665.07 1226.62
3 10 10 100 584.55 1141.72
Sample HS UL
Sample HS DL
CQI (Median) diatas 25
Pastikan yang 16QAM main
Untuk melihat hasil DT per Sector
Lock Carrier UE HS
• Use Hyperterminal• Use command sequence• Lock command:
at!umtschan=1,10763 ->f1; f2= 10788at!umtschan?at!umtschan=0