3M Adhesive Material Selection Guide

8/10/2019 3M Adhesive Material Selection Guide

1/88

Converter MarketsProduct Selection Guide

www.3m.com/converterEffective: September 2001


2/88

Information at a click...www.3m.com/converter


3/88

3

The 3M Converter Markets ProductSelection Guide integrates 3Ms vast

product and technology portfolio intoone reference source. 3M innovation

provides our converter customers withthe highest performing and most costeffective material solutions available.

Take advantage of 3M resources forhelping you streamline your businessoperations. www.3m.com/converteris a

prime site for information and services.The site features:

Product information and technicaldata sheets

Product selectors

MSDS sheets and listing of ULrecognized 3M material

Convenient ordering of productsamples

Search function for a local 3MConverter Markets FieldRepresentative

And much more

To select the correct 3M component ormaterial solution you first need todetermine the appropriate adhesive.Selecting the proper adhesive for anyapplication must include considerationof the substrate surface characteristicsand the application performance

requirements.

1. To start building your product, firstdetermine which adhesive best meetsyour need. The Adhesive FamilyDescriptions and the AdhesiveSelection Charts at the beginning ofthe Label Materials and theAdhesive Bonding Tapes sectionshighlight the performance featuresand characteristics of 3M adhesives.

More detailed information about3M adhesives temperature,environmental and other performancecharacteristics are included in thecharts on pages 11 and 33.

2. If you are considering a labelmaterial, you can choose theappropriate facestock suitable foryour application by looking at the

Facestock Properties chart onpage 13. This chart showsenvironmental performance and

processing properties of our variousfacestock materials.

For instances when an application

requires the use of a specific liner,weve included convenient cross-reference charts on pages 14 and 35.

For information on a specific product,consult the Products Index.

3M Helping toBuild Your Business

Using theSelection Guide Table of Contents

Index by product number

Fundamentals of adhesion

Label Materials and Components

Reference

Adhesive FamiliesAdhesive Selection ChartAdhesive PropertiesFacestock PropertiesLiner Reference ChartProducts

Roll Label Materials - Film and FoilRoll Label Materials - Pharmaceutical

and Performance PaperSheet Label MaterialsOverlaminating Films

Adhesive Bonding Tapes

Pressure Sensitive Adhesives (PSAs)

ReferenceAdhesive FamiliesAdhesive Selection ChartAdhesive PropertiesLiner Reference ChartProducts

Adhesive Transfer TapesDouble Linered Adhesive Transfer TapesDouble Coated TapesMembrane Switch Spacers3M VHB Conformable Tapes/

3M VHB TapesDouble Coated Foam Tapes/Structural

Bonding Tapes

Viscoelastic Damping Polymers

Single Sided Tapes

Tape Reference ChartSingle Coated TapesSingle Coated Foam TapesSpecialty Tapes

Flexographic Mounting SystemsRepulpable Tapes

Protective Tape Products Short Term Protection

EMI Shielding and Electrical Tapes

Release Liners and Printable Films

3M Thermo-Bond Films

Reclosable Fasteners

Scotchmate Reclosable FastenerDual Lock Reclosable Fastener

Bumpon Protective Products

Resilient RollstockMolded Products

4

6

7

81

1

1

14

1

2

2

2

2

3

3

3

3

3

4

4

4

4

5

5

5

54

5

6

64

6

6

6

7

7

7

7

7

8

8

84


4/88

4

1 692A04 662A05 662A10 662A12 662A25 662A26 662A29 662A87 662A88 662E79 662E93 662E95 673W25X 673W26X 673W29X 675 7010 6920 6924S56 6625A10 6625A12 6625A25 6625A26 66

25A29 6625A87 6625A88 6627 6940 7040L 7042 7042L 7044 7054 7055 7056 7057 7060 7161 7162 71

63 7169 6975 7092 70110 51111 51130 51218 56231 56232 56234 56242 51250 57255 57266 57267 57280 57

335 57336 57355 61356 61361 56363 55365 56367FR 56367FR-P 56373 61375 61400 45401 45404 45

405 65406 45406 76410 45411DL 64412DL 64413DL 64414DL 64415 44420 56425 55427 55431 55434 55435 55436 55439 55442KW 45443PC 44444 43444PC 43447DL 64463 39464 44

464XL 44465 39465XL 39467 36467MP 36467MPF 36467MS 36468 36468MP 36468MPF 36468MS 36470 60471 60474 60481 61495 60

500 61501FL 37502FL 37504FL 37505 65557 76560 76583 76588 76600 61605 61610 61615 76616 61620 75665 44666 44

668 76669 76681 61695 76764 60765 60766 60767 60821 61823 61845 76850 57853 57880 62

890 62893 62898 62900B 65901 65902 65905 65906 65910 65913 65917 65919 44920XL 39921XL 39922XL 39927 37929 64933 64939 64941 36941N 36949 64950 37950EK 37

964 38965 36966 36992 37992U 37995 371015 641015M 641020 641020M 641020R 641040 641060 641115 641120 641120K 64

1170 691181 691182 691183 691190 691194 691205 701245 691267 691279 571281 571285 571290 571298 701318 701345 691350-1 70

1350-2 701430 551614 661620 641640 641650 641675 661815M 641820M 641915M 641920M 642104 662105 662110 66

2112 662125 662126 662310M 572310ML 572310MS 572317 572317L 572317S 572552 552621 573028EK 443104 673105 673110 673112 673125 673126 673130 683173 673179C 673187 673188 673565 62

3615 563615L 563633 553650 563675 563675L 563690E 193698E 203921 223929 204004 504008 504014 634026 504032 504052 50

4056 504082 504084 504085 504104 634108 634112 674116 634125 674126 674130 684167 674179 674187 674188 674193 674314 63

4317 634318 634408 504416 504432 504462 504466 504492 504496 504504 634508 634516 634611 484658F 50

4712 614714 634718 634726 634735 614735L 614735S 614811 624905 494910 494920 494921 504926 484929 494930 494932 494935 744936 48436F 484941 484941F 484943F 484945 494946 49

4949 494950 494951 494952 494955 494956 484956F 484957F 484959 494962 504965 504979F 484986 744988 744991 484992 50

4994 744996 744997 744998 744999 745002 745002D 745004 745112 675125 675126 675130 685187 685188 685413 585419 585421 60

5423 605425 605430 605433 585451 595453 595480 595481 595490 595491 595498 595770 155771 165772 19

5910 625932 745952 486032PC 386035PC 386035PL 386038PC 386699 577000 237000FL 237000FP 237000PL 237002 237004 237011 247011F 247011FP 247011PL 247014 237014FL 237014FP 237014PL 237050 237109 23

7110 247110FL 247110FP 247110PL 247113 237116 247120 247122 247142 237222 177286 217291 217293 217323 187324 187325 18

7331 167331FL 167340FL 227350 177350FL 177360FL 227361FL 227380 197381 197384 197385 197385PB 197389 197411 587413 597413L 597480 15

7590 627600 197603 207604FP 197605 207613 207620 207710 217722 217723 217730FL 277731FL 277732FL 277735FL 27

Index by Product Number


5/88

5

7737FL 287738FL 287740 177741 277742 277743FL 277744 277744FL 27

7745FL 177745FL 277753 177774 217776 217777 217778 217779 217782 277783 217784 277800 207800T 627801 217804 217810 15

7811 227811FL 227812 227813 177814 157815 157815FL 157816 167816FL 167817 167818 177819 197822 187826 177828 187830 167831 177840 157840PB 157840TL 157841 217842 157842TL 157845TL 177846 227847 227848 227850TL 157852HL 157853HL 177860 167861 177863 18

7864 167865 187866 197867 187868 167871 167871FL 167872 197872FL 197873 187874 157874FL 157875 197876 17

7879FL 187880 167880HL 167881 177882HL 157883 187883HL 187884 20

7885 207887 187890 207897 187900T 627901 20,267902 20,267903 257903FL 257904 20,267905 257907 167908 257908FL 257909 257910P 26

7925 267930 267931 257935 267937 267940 267941 267942 267945MP 467950 257951 427952MP 417953MP 467955MP 417956MP 467957MP 467959MP 467961MP 467962MP 417965MP 417979 467980 257982 257983 257993MP 477995MP 477997MP 478000 228038 748039 748041 288042 288044 74

8049 748050 748051 278053 748057 748058 748132LE 418141 428142 428153LE 418161 428402 588403 588415 27

8417 278418 168421 588464 588560 598561 598562 598671 59

8672 598805 408810 408815 408901 588902 588905 588911 588911L 588951 588951L 588952 588952L 588953 588953L 589017FL 25

9018FL 259022 659045MP 469056MP 469057MP 469059MP 469061MP 469103 659172MP 419172PT 419185MP 419343 569372DK 389373 389375 389415PC 449416 449420 449425PC 439428 419437 419442 399443 449445 399446 449447 399449 429452 379453FL 389453LE 389456 439457 399458 37

9459S 379459W 379460PC 369461P 369462P 369463PC 369464 399465PC 399466B 419469PC 369471 379471FL 389471LE 389471PC 37

9472 379472LE 389473PC 369482PC 399483 429485PC 399490LE 439492B 43

9492MP 439492MPF 439495B 439495BF 439495FL 439495LE 439495MP 439495MPF 439497 399498 399499 399500PC 449502 379502HL 379505 379505HL 37

9522 379525 379552 419553 469555 419557 479559 479561 479563 479567 369568 369573 449576 449576B 449576R 449578 449579 449586F 449589 449598BF 439653 379653LE 389665 399667MP 369668MP 369671 379671LE 389672 379672LE 389673 379675 399676MP 419690 43

9690B 439692 389695 389703 399712 399713 399731 449752PC 399755PC 399770 389774 389784 429795B 449795BF 44

9824 439828 439828HL 439851 459870 439871 439882 409885 40

9890 409892FR 409952 659953 659966 659967 659968 659969 659974 659977 659981H 659982H 659985 659987 65S8300 63S8500 63

S8700 63SJ3223 79SJ3401 78SJ3402 78SJ3418 78SJ3419 78SJ3440 79SJ3441 79SJ3442 79SJ3443 79SJ3444 79SJ3460 79SJ3461 79SJ3462 79SH3476 78SJ3477 78SJ3486 78SJ3487 78SJ3506 78SJ3507 78SJ3518FR 78SJ3519FR 78SJ3522 78SJ3523 78SJ3526 78SJ3527 78SJ3530 78SJ3531 78SJ3532 78SJ3533 78SJ3536 78SJ3537 78SJ3540 79

SJ3540GT 79SJ3541 79SJ3541GT 79SJ3542 79SJ3542GT 79SJ3550 79SJ3551 79SJ3552 79SJ3553 79SJ3554 79SJ3560 79SJ3561 79SJ3562 79SJ3571 78

SJ3572 78SJ3576 78SJ3577 78SJ3586 78SJ3587 78SJ3860FR 79SJ3861FR 79SJ3862FR 79

SJ4570 79SJ4580 79SJ5001 84SJ5003 84SJ5007 84SJ5008 84SJ5009 84SJ5012 84SJ5017 84SJ5018 84SJ5023 84SJ5027 84SJ5201 84SJ5202 84SJ5208 83SJ5216 83

SJ5302 84SJ5303 84SJ5306 84SJ5312 84SJ5402 84SJ5406 84SJ5412 84SJ5510 84SJ5514 84SJ5532 84SJ5608 82,83SJ5616 82,83SJ5632 82,83SJ5705 84SJ5744 84SJ5808BK 82,83SJ5808BR 82,83SJ5816BK 82,83SJ5816BR 82,83SJ5832BK 82,83SJ5832BR 82,83SJ5904BK 82,83SJ5908BK 82,83SJ5916BK 82,83SJ6008BK 82,83SJ6008BR 82,83SJ6016BK 82,83SJ6016BR 82,83SJ6032BK 82,83SJ6032BR 82,83SJ6115 84SJ6125 84SJ6208BK 82,83

SJ6216BK 82,83SJ6232BK 82,83SJ6344 84SJ6506 84SJ6512 84SJ6553 84SJ6561 84T-063A 63T-063S 63T-125A 63T-125S 63T-250A 63T-250S 63

Index by Product Number


6/88

6

There are differences in adhesives.

Selecting the proper adhesives for

a nameplate, label or membrane switch

application requires consideration of

environmental, surface, appearance and

other performance requirements. Our

purpose here is to cover some ofthe principles of adhesion.

Surface contact is fundamental to

adhesive performance. To maximize

adhesive contact on a surface:

It must be dry and free of

contaminates.

Firm pressure must be applied to

increase the flow and contact of

the adhesive with the substrate.

Time and temperature will

increase the surface contact and

adhesion values.

Oil contaminated materials may

be addressed with the 300LSE

or 350 adhesive families.

Adhesion is the molecular force

of attraction between unlike materials.

The strength of attraction is determined

by the surface energy of the material.

The higher the surface energy, the

greater the molecular attraction. The

lower the surface energy, the weaker

the attractive forces.

Greater molecular attraction results in

increased contact between an adhesive

and substrate. In other words, a high

surface energy material, the adhesivecan flow (or wet-out) to assure a

stronger bond.

Consider an automobile that has not

been waxed for a long time. When water

contacts the surface it spreads in large

puddles. The unwaxed car surface

exhibits high surface energy the

molecular attraction allows the water

to flow.

In comparison, water beads up into

small spheres on freshly waxed car.It is an example of low surface

energy the liquid (or adhesive)

does not flow out.

Surface energy is measured by dynes

per centimeter. The dyne level is the

actual reading of the critical surface

tension.

Modified acrylic and synthetic

adhesives with better flow (or

wet-out) characteristics have been

developed to adhere to low surface ener-

gy substrates. The Surface Energy Chart

below compares the relative

surface energy of commonly used

substrates.

3Ms firm acrylic adhesives such

as #200, #200MP and #600 families

will not readily adhere to substratescategorized as having low surface ener-

gy. However, 3Ms #300, #320, #350,

and #300LSE modified acrylics or #700

synthetic rubber adhesives

have been designed to adhere to low

surface energy plastics, and should be

considered for those applications.

Fundamentals of Adhesion

Wettability Principle

Surface Energy Chart

(Acrylic or Enamel) Paint Metal

Liquid

Wax (Polyethylene) Paint Metal

High Surface Energy

Low Surface Energy

Liquid

PaintMetal

PaintWax

Metal

Dynes/cm Dynes/cmDynes/cm

Metals Low Surface Energy PlasticsHigh Surface Energy Plastics

1103 Copper840 Aluminum753 Zinc526 Tin458 Lead700-1100 Stainless steel250-500 Glass, porcelain

50 Kapton

47 Phenolic46 Nylon45 Alkyd enamel43 Polyester43 Epoxy paint43 Polyurethane paint

37 PVA36 Polystyrene36 Acetal33 EVA31 Polyethylene29 Polypropylene28 Tedlar

18 Teflon

Powder coated paints*

This illustration demonstrates the effect of surfaceenergy on adhesive interfacial contact. High surface

energy materials draw the adhesive closer for highbond strength.

Note: These values are provided as a guide.Modifications in formulations can substantially alter surface energies.Kapton, Tedlar and Teflon are registered trademarks of Dupont.Noryl is a registered trademark of General Electric.Polane is a registered trademark of the Sherwin-Williams Company.

*Broad range of surface energy.

42 ABS42 Polycarbonate39 PVC38 Noryl

38 Acrylic38 Polane Paint50 Fiberglass


7/88

Label Materialsand Components

7


8/88

8

Adhesive Families Label Materials

100 High Temperature Acrylic

Up to 450F short term heatresistance and excellentsolvent resistance.

High peel strength comparedto other acrylic formulations.

Exceptional shear strengtheven at elevated temperatures.

Exhibits low outgassingcharacteristics.


Up to 450F short term heatresistance and excellent solventresistance.

High internal strength ideal forapplications on surface energy

plastics and metals.

200 High Performance Acrylic

Up to 350F short term heatresistance and mediumsolvent resistance.

Excellent peel strength onmetal and HSE plastics.

Good long term aging.

200MP High Performance Acrylic


Outstanding adhesion tometal and high surface energy

plastics.

Excellent shear strength toresist slippage and edge lifting.

Short term repositionability forplacement accuracy.

300 High Strength Acrylic

Up to 250F short term heatresistance.

Greater initial adhesionespecially to low surfaceenergy plastics.

Quick flowing to speedlamination of textured plastics,foams, fabrics, and coated

papers.

310 High Precision Acrylic

Provides firmness and highprecision strength on a varietyof surfaces including HSE

plastics and metals.

Compatible with a varietyof print technologies includingthermal transfer and laser

printing.

320 High Tenacity Acrylic


High bond strength to a varietyof surfaces.

Excellent flagging resistanceon small diameter surfaces.

350 High-holding Acrylic

Ideal for very high bond strengthto many surfaces.

Most universal adhesive ideal for

powder coatings, LSE plastics,and oily metals.

Up to 350 F short term heatresistance and excellent solventresistance.

400 High Tack Acrylic


Excellent adhesion to uncoatedpapers.

Clarity and UV resistance forwindow label applications.

Good low temperatureperformance and peel strengthon many surfaces.

500 High Stability Acrylic

Cleanly removes from mostsurfaces up to one year afterapplication.

Excellent for die-cut masksneeding outdoor performanceand removability.

For vinyl label stocks only.

550 Permanent Bond Acrylic

Provides permanent bond

strength to a wide varietyof surfaces.

Because the adhesive levelneither builds nor degradesover time, it will removecleanly from most HSEmaterials.

700 High Bond Synthetic Rubber


High peel strength to lowsurface energy substrates.

For indoor and roomtemperature application.

Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.


9/88

9

1000 Repositionable Acrylic

Good holding to manysurfaces.

Clean removal or numerousreapplications.

Stain resistance on manysurfaces.

1100 Wet-surface Acrylic

Bonds to wet or dampsurfaces.

Good adhesion to a varietyof surfaces including glass,

plastic, wood and metal.

Meets TAPPI #213 forrepulpability.

AP-360 Emulsion Acrylic

Firm adhesive for a broadrange of applications,including attachment tolow-surface energy plastics.

High initial adhesion andexcellent aging characteristics.

Ideal for opaque films.

AP-380 Superior Emulsion Acrylic

Ideal for use on plastics,metals, glass, films, corrugated

and coated board.

Performs well on smooth andirregular surfaces or whereexceptional holding power is

desirable. Not recommended where

water-clear appearance isimportant.

HP-395 RepositionableEmulsion Acrylic

Superior adhesive performance.

Provides a degree ofrepositionability on somesurfaces.

UC-50 Emulsion Acrylic

Broad performance withexcellent clarity and wet out.

Ideal for overlaminating films.

Adhesive Families Label Materials



10/88

10

Adhesive Selection Chart Based on Surface Energy Label Materials

These charts are based on relative adhesion within each given surface energy category.

Metals Surface Energy

Dynes/cm

Copper 1103

Aluminum 840

Zinc 753

Tin 526

Lead 543

HSE Surface Energy

Plastics Dynes/cm

Kapton 50

Phenolic 47

Nylon 46

Alkyd Enamel 45

Polyester 43

Epoxy Paint 43

Polyurethane 43

ABS 42

Polycarbonate 42

PVC 39

Noryl 38

Acrylic 38

Polane Paint 38

LSE Surface Energy

Plastics Dynes/cm

PVA 37

Polystrene 36

Acetal 36

EVA 33

Polyethylene 31

Polypropylene 29

Tedlar 28

Teflon 18

Powder Coatings **

**Broad range of surface energy.

Adhesive 1 2 3 4 5 6 7 8 9 10

100

150

200

200MP

300

310

320

350

400

500

550

700

1000

1100

AP-360

AP-380

HP-395

UC-50

Adhesive 1 2 3 4 5 6 7 8 9 10

100

150

200

200MP

300

310

320

350

400

500

550

700

1000

1100

AP-360

AP-380

HP-395

UC-50

Adhesive 1 2 3 4 5 6 7 8 9 10

100

150

200

200MP

300

310

320

350

400

500

550

700

1000

1100

AP-360

AP-380

HP-395

UC-50

1=Lowest Performance 10=Highest Performance



11/88

11

LABELMATERIALS/COMPONENTS

Adhesive Properties

Adhesive Properties* Adhesion To: Environmental Performance Temperature ProductsPeel Shear Resistance To: (F)

Room Plast. Plast. Ultra Plasti- Minimum Service

Initial Ultimate Temp. 150F Metal HSE LSE Chemical Violet cizers Humidity Application Low High

Values: 1 Lowest Performance 10 Highest Performance

* When selecting a label stock or laminating film, check facestock performance properties to assure it shares similar characteristics.The rankings are a general guide. Adhesives should be tested with actual components to ensure acceptable performance.

#100

High 3 9 10 10 9 8 1 10 10 5 10 50 -40 450 7811, 7811FL, 7812, 8417temperature 8418

#150

High 6 7 10 10 7 7 4 5 10 4 9 50 -40 400 3921temperature

#200

High 3 10 4 1 10 9 1 7 10 4 10 50 -40 350 3929, 7804, 7852HL,performance 7853HL, 7885, 7941

#200MP

High 4 10 10 10 10 9 1 9 10 5 10 50 -40 400 9017FL, 9018FLperformance

#300

High strength 6 7 4 1 7 8 9 6 7 3 8 50 -40 250 7004, 7222, 7323, 7325,7331, 7331FL, 7350,7350FL, 7380, 7381, 7384,7480, 7603, 7604FP,7620, 7778, 7810, 7813,7860, 7861, 7863, 7865,7866, 7867, 7880,7880HL, 7881, 7883,7883HL, 7887, 7890,7902, 7924, 7925, 7931,7935, 7937, 7950, 7980,7983

#310

High precision 5 6 4 1 6 6 5 6 6 3 8 50 -40 250 7776, 7815, 7815FL, 78167816FL, 7818, 7840,7840PB, 7840TL, 7841,7845TL, 7875, 7897

#320

High tenacity 6 7 4 4 7 7 7 6 6 3 8 50 -40 250 3690E, 3698E, 7000,

7000FL, 7000FP, 7000PL,

7002, 7011, 7011FL,7011FP, 7011PR,

7014, 7014FL, 7014PL,

7014FP, 7110, 7122,

7324,7385,7389, 7740,

7800, 7801, 7940, 7942,

#350

Premium 7 9 8 8 9 10 10 8 7 4 9 50 -40 350 7605, 7613, 7779, 7846,Performance 7847, 7848, 7850TL,

7868, 7871, 7871FL, 78727872FL, 7873, 7874, 7874FL7876, 7879FL, 7903,7903FL, 7904, 7905, 79077908, 7908FL, 7909,7930, 8000

#400High tack 4 5 5 4 5 5 5 5 10 4 8 10 -60 250 7120, 7710, 7730FL,

7731FL, 7732FL, 7735FL,7737FL, 7738FL, 7741,7742, 7743FL, 7744,7744FL, 7745FL, 7753,7822, 7826, 7828, 7830,7831, 7864, 7882HL, 7920,7921, 7982, 8041, 8042,8415

Acrylic



12/88

12

Adhesive Properties

Adhesive Properties* Adhesion To: Environmental Performance Temperature ProductsPeel Shear Resistance To: (F)

Room Plast. Plast. Ultra Plasti- Minimum Service

Initial Ultimate Temp. 150F Metal HSE LSE Chemical Violet cizers Humidity Application Low High

Values: 1 Lowest Performance 10 Highest Performance N/A Not Available (Testing has not been performed.)

* When selecting a label stock or laminating film, check facestock performance properties to assure it shares similar characteristics.The rankings are a general guide. Adhesives should be tested with actual components to ensure acceptable performance.** 450 if thermoset

#500

High stability 4 5 4 1 5 7 4 5 10 8 10 50 -40 250 7600, 7884, 7901

#550Permanent 4 5 3 4 5 6 3 5 8 4 8 50 -40 250 5770, 5771, 5772Bond / CleanRemoval

Rubber#700

High bond 7 9 10 2 9 10 9 2 4 1 9 50 -40 200 7050, 8051

Repositionable Acrylic#1000

Repositionable 2 3 3 3 3 1 1 2 7 3 4 5 -20 250 7113, 7116, 7142

Wet-surface acrylic

#1100

Wet-surface 5 4 4 4 4 3 1 4 10 4 4 50 -40 200 7109

Emulsion Acrylic Series

#AP-360

Emulsion 4 5 N/A N/A 5 6 6 6 8 N/A N/A 20 -40 250 7286, 7291, 7293, 7777,Acrylic 7910P

#AP-380

Superior 4 6 N/A N/A 6 8 7 6 8 N/A N/A 20 -40 250 7783EmulsionAcrylic

#HP-395

Repositionable 4 5 N/A N/A 5 5 5 7 8 N/A N/A 30 -20 250 7814, 7817, 7819,Emulsion 7842, 7842TLAcrylic

#UC-50

Emulsion 4 6 N/A N/A 6 7 4 5 8 N/A N/A 30 -20 250 7722, 7723, 7774, 7782,Acrylic 7784

Acrylic continued




13/88

13

Facestock Properties

Facestock Chemical Resistance Environmental Resistance Processing Properties ProductsFamily Strong Strong Grease Organic UV Conform- Die-Cut- Dispens-

Acids Alkalies Oil Solvent Water Light HeatF ColdF ability ability ability

Polyester - Thermal 6 6 9 8 8 8 300 -40 5 5 8 5770, 5771, 5772, 7744,Transfer 7744FL, 7753, 7810, 7813

Polyester - Laser Toner 6 6 9 9 8 8 300 -40 5 5 8

Polyester - Dot Matrix 6 6 9 7 8 8 300 -40 5 5 8

Polyester - Press Printable 6 6 9 8 8 8 300 -40 5 5 8

Polyester - Screen 6 6 9 8 8 8 300 -40 5 5 8

Polyester - Security 6 6 9 8 8 8 150 -40 6 5 8

Polypropylene 9 8 6 6 8 4 225 -40 7 3 2

Polyolefin (KimduraTM) 9 8 6 6 8 3 225 -40 6 5 7

Polyolefin (TeslinTM) 6 5 6 9 8 6 275 -40 6 5 7

AcrylarTM 4 4 7 7 8 10 175 -40 3 7 6 7735FL

Acrylate 10 10 8 6 9 9 390 -40 6 7 5 3921, 7846, 7847, 7848Acetate 1 1 6 2 4 6 170 -15 3 7 8 7710, 7722, 7723, 8041, 8042

Destructible Vinyl 8 8 6 5 8 6 175 -40 6 5 2 7613, 7885, 7930

Foil - Aluminum 5 5 8 5 9 8 350 -40 2 2 2 7800, 7801, 7804, 7940,

7941, 7942

KaptonTM 7 7 9 7 8 8 500 -40 5 5 8 7811, 7812, 7811FL

LexanTM 6 1 7 7 8 3 250 -40 4 5 6 7737FL, 7738FL

Paper 3 4 3 5 2 6 350 -40 3 9 9

Retro-reflective 6 6 9 7 8 8 300 -40 6 5 8 3929

Vinyl 6 6 6 6 8 7 175 -40 8 5 4

7814, 7815, 7815FL, 78167816FL, 7817, 7817FL,7818, 7819, 7831, 7860,7861, 7863, 7864,7865,7867, 7868, 7871,7871FL, 7872, 7872FL,7873, 7874, 7875, 7876,7879FL, 7907

7840TL, 7842TL, 7845TL,7850TL,

7480, 7840, 7842, 7880,7881, 7883, 7887, 7897,7980, 7982, 7983,

7745FL, 7852HL, 7853HL,7880HL, 7882HL, 7883HL

7222, 7323, 7324, 7325,7331, 7350, 7740, 7741,7742, 7782, 7784, 7822,7826, 7828, 7830, 8415,8417, 8418, 7331FL,

7350FL, 7730FL, 7731FL,7732FL, 7743FL,

7903, 7905, 7908, 7909,7920, 7921, 7924, 7925,7931, 7935, 7937, 7950,7903FL, 7908FL, 9017FL,9018FL

7380, 7381, 7384, 7385,7389, 7866, 7936, 7937

7774, 7776, 7777, 7778,

7779, 7783, 8051

7286, 7291

7293, 7841

7000, 7002, 7004, 7011,7013, 7014, 7050, 7109,7110, 7113, 7116, 7120,7122, 7142, 7000FL/FP/PL,7011FL/FP/PL, 7014FL/FP/PL7110FL/FP/PL,

7600, 7603, 7605, 7620,7884, 7890, 7901, 7902,7904, 3690E, 3698E,7604FP, 7910P

Facestock Properties

Facestock Chemical Resistance Environmental Resistance Processing Properties ProductsFamily Strong Strong Grease Organic UV Conform- Die-Cut- Dispens-

Acids Alkalies Oil Solvent Water Light HeatF ColdF ability ability ability

Kimdura is a trademark of Kimberly Clark Corp.Teslin is a trademark of PPG.Opticite-SQZ is a trademark of Dow Chemical Corp.Kampton is a trademark of Dupont Corp.Lexan is a trademark of General Electric Co.Acrylar is a 3M trademark for acrylic

The rankings are a general guide. Facestocks should be tested with actual components to ensure acceptable performance.


Polyester - Thermal 6 6 9 8 8 8 300 -40 5 5 8Transfer

Polyester - Laser Toner 6 6 9 9 8 8 300 -40 5 5 8

Polyester - Dot Matrix 6 6 9 7 8 8 300 -40 5 5 8

Polyester - Press Printable 6 6 9 8 8 8 300 -40 5 5 8

Polyester - Screen 6 6 9 8 8 8 300 -40 5 5 8

Polyester - Security 6 6 9 8 8 8 150 -40 6 5 8

Polypropylene 9 8 6 6 8 4 225 -40 7 3 2

Polyolefin (KimduraTM) 9 8 6 6 8 3 225 -40 6 5 7

Polyolefin (TeslinTM) 6 5 6 9 8 6 275 -40 6 5 7

AcrylarTM 4 4 7 7 8 10 175 -40 3 7 6 7735FL

Acrylate 10 10 8 6 9 9 390 -40 6 7 5 3921, 7846, 7847, 7848Acetate 1 1 6 2 4 6 170 -15 3 7 8 7710, 7722, 7723, 8041, 8042

Destructible Vinyl 8 8 6 5 8 6 175 -40 6 5 2 7613, 7885, 7930

Foil - Aluminum 5 5 8 5 9 8 350 -40 2 2 2 7800, 7801, 7804, 7940,

7941, 7942

KaptonTM 7 7 9 7 8 8 500 -40 5 5 8 7811, 7812, 7811FL

LexanTM 6 1 7 7 8 3 250 -40 4 5 6 7737FL, 7738FL

Paper 3 4 3 5 2 6 350 -40 3 9 9

Retro-reflective 6 6 9 7 8 8 300 -40 6 5 8 3929

Vinyl 6 6 6 6 8 7 175 -40 8 5 4

5770, 5771, 5772, 7340FL,7360FL, 7361FL, 7744,7744FL, 7753, 7810, 7813,7814, 7815, 7815FL, 7816,7816FL, 7817, 7817FL,7818, 7819, 7831, 7860,

7861, 7863, 7864, 7865,7867, 7868, 7871, 7871FL,7872, 7872FL, 7873, 7874,7875, 7876, 7879FL, 7907

7840TL, 7842TL, 7845TL,7850TL,

7480, 7840, 7842, 7880,7881, 7883, 7887, 7897,7980, 7982, 7983,

7745FL, 7852HL, 7853HL,7880HL, 7882HL, 7883HL

7222, 7323, 7324, 7325,7331, 7350, 7740, 7741,7742, 7782, 7784, 7822,7826, 7828, 7830, 8415,8417, 8418, 7331FL,

7350FL, 7730FL, 7731FL,7732FL, 7743FL,

7903, 7905, 7908, 7909,7920, 7921, 7924, 7925,7931, 7935, 7937, 7950,7903FL, 7908FL, 9017FL,9018FL

7380, 7381, 7384, 7385,7389, 7866, 7936, 7937

7774, 7776, 7777, 7778,

7779, 7783, 8051

7286, 7291

7293, 7841

7000, 7002, 7004, 7011,7013, 7014, 7050, 7109,7110, 7113, 7116, 7120,7122, 7142, 7000FL/FP/PL,7011FL/FP/PL, 7014FL/FP/PL7110FL/FP/PL,

7600, 7603, 7605, 7620,7884, 7890, 7901, 7902,7904, 3690E, 3698E,7604FP, 7910P


13


14/88

14

Basis Weight 40# 50# 60# 80# 94# 40# 50# 80# 80 g/m2 90 g/m2

Caliper (Mils) 2.5 3.2 3.3 4.5 6.8 3.4 3.7 4.6 3.0 3.2 1.5 4.0 2.0

7000 3921 7800 3292 7901 7782 7840 TL 7842 8000 7846 7753 7903 FL 7000 PL7002 5770 7801 7902 7784 7842 TL 7852 HL 7847 7000 FL 7908 FL 7011 PL7004 5771 7804 7903 7845 TL 7853 HL 7848 7011 FL 9017 FL 7014 PL7011 5772 7904 7850 TL 7880 HL 3690 E 7014 FL 9018 FL 7110 PL7014 7013 7907 7882 HL 3698 E 7110 FL7050 7113 7908 7883 HL 7331 FL7109 7116 7909 7350 FL7110 7222 7920 7730 FL7120 7291 7921 7731 FL7122 7293 7924 7350 FL7142 7323 7925 7730 FL7600 7324 7930 7731 FL7603 7325 7931 7732 FL7710 7331 7935 7735 FL7722 7350 7930 7737 FL7723 7380 7931 7738 FL7741 7381 7935 7743 FL7742 7384 7937 7744 FL7744 7385 7940 7745 FL

8418 7389 7941 7811 FL7605 7942 7815 FL7613 7950 7816 FL7620 7980 7871 FL7740 7982 7872 FL7774 7983 7874 FL7776 7910 P 7879 FL777777787779778378107811781278137814781578167817

7818781978227826782878307831784078417860786178637864786578667867786878717872

7873787478757876788078817883788478857887789078977000 FP7011 FP7014 FP7110 FP7604 FP

Single Side Silicone Release

Polycoated Poly-Densified Kraft Kraft Clay Coated Glassine Polyester propylene

Label Materials

Liner Reference Chart Labels

14


Basis Weight 40# 50# 60# 80# 94# 40# 50# 80# 80 g/m2 90 g/m2

Caliper (Mils) 2.5 3.2 3.3 4.5 6.8 3.4 3.7 4.6 3.0 3.2 1.5 2.0 4.0 2.0

7000 3921 7800 3292 7901 7782 7840 TL 7842 8000 7846 7753 7340FL 7903 FL 7000 PL7002 5770 7801 7902 7784 7842 TL 7852 HL 7847 7000 FL 7360FL 7908 FL 7011 PL7004 5771 7804 7903 7845 TL 7853 HL 7848 7011 FL 7361FL 9017 FL 7014 PL7011 5772 7904 7850 TL 7880 HL 3690 E 7014 FL 9018 FL 7110 PL7014 7013 7907 7882 HL 3698 E 7110 FL7050 7113 7908 7883 HL 7331 FL7109 7116 7909 7350 FL7110 7222 7920 7730 FL7120 7291 7921 7731 FL7122 7293 7924 7350 FL7142 7323 7925 7730 FL7600 7324 7930 7731 FL7603 7325 7931 7732 FL7710 7331 7935 7735 FL7722 7350 7930 7737 FL7723 7380 7931 7738 FL7741 7381 7935 7743 FL7742 7384 7937 7744 FL7744 7385 7940 7745 FL

8418 7389 7941 7811 FL7605 7942 7815 FL7613 7950 7816 FL7620 7980 7871 FL7740 7982 7872 FL7774 7983 7874 FL7776 7910 P 7879 FL777777787779778378107811781278137814781578167817

7818781978227826782878307831784078417860786178637864786578667867786878717872

7873787478757876788078817883788478857887789078977000 FP7011 FP7014 FP7110 FP7604 FP

Single Side Silicone Release

Polycoated Poly-Densified Kraft Kraft Clay Coated Glassine Polyester propylene

Liner Reference Chart Labels

Label Materials


15/88

15

3MRoll Label Materials Film & Foil

Facestock Product Typical Performance Characteristics Construction Roll Width Print SpecsCaliper Facestock MethodMils Adhesive Type Pre-Slit Widths

Liner

Polyester 5770 Thermal transfer printable facestock with high 2.3 PET, Matte White 54" Thermalstability adhesive. Offers permanent adhesion, 1.0 550 Transfer

Matte White yet is cleanly removable from many surfaces. 3.2 50# Densified Kraft 6" , 13-1/2", 27"

7480 Fast dry top-coat for printing of large bar codes 2.3 PET, Matte White 54" Dot matrixor alphanumeric symbols. 0.8 300

3.7 50# Clay Coated Kraft 6", 13-1/2", 27"

7810 Features ultra smooth top-coat. Ideal for bar code 2.3 PET, Matte White 54" Thermalapplications. Good durability with a wide range 0.8 300 Transferof r ibbons. 3.2 50# Densified Kraft 6" , 13-1/2", 27"

7814 Same as 7810 label stock, except HP-395 adhesive. 2.3 PET, Matte White 54" ThermalGood adhesion to a variety of surfaces. 1.1 HP-395 Transfer

3.2 50# Densi fied Kraf t 6", 13-1/2", 27"

7815 Same as 7810 label stock, except #310 adhesive. 2.3 PET, Matte White 54" ThermalFirm adhesive that resists oozing. 0.8 310 Transfer

3.2 50# Densi fied Kraf t 6", 13-1/2", 27"

7815FL Same as 7815 label stock, except polyester liner. 2.3 PET, Matte White 54" Thermal0.8 310 Transfer1.5 Polyester Film 6", 13-1/2", 27"

7840 Matte top-coat offers excellent ink anchorage for 2.3 PET, Matte White 54" Dot Matrixvarious electronic printing technologies. 0.8 310Firm adhesive that resists oozing. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7840PB Same as 7840 label stock, except with piggyback 2.3 PET, Matte White 54" Dot Matrixadhesive. 0.8 310

3.2 50# Densi fied Kraf t 6", 13-1/2", 27"Second adhesive 0.8 310Second liner 3.2 Densified Kraft

7840TL Same as 7840 label stock, except with 2.3 PET, Matte White 54" Laser,clay-coated liner. 0.8 310 Dot Matrix


7842 Matte top-coat offers excellent ink anchorage for 2.3 PET, Matte White 54" Dot Matrixvarious electronic printing technologies. 1.1 HP-395Good adhesion to a wide variety of surfaces. 4.6 80# Clay Coated Kraft 8-7/16", 27"

7842TL Same as 7842 label stock, except thinner liner. 2.3 PET, Matte White 54" Laser,Ideal for a wide variety of sheet fed laser printer. 1.1 HP-395 Dot Matrix

3.7 50# Clay Coated Kraft 8-7/16", 27"

7850TL Matte top-coat offers excellent ink anchorage for 2.3 PET, Matte White 54" Laser,laser toner and dot-matrix. Excellent high 1.1 350 Dot Matrixtemperature performance especially to LSE 3.7 50# Clay Coated Kraft 8-7/16", 27"plastics and smooth powder coats.

7852HL Excellent for textured surfaces. Used for asset 2.3 PET, Matte White 54" Dot Matrixlabels. High-temperature adhesive. 2.0 200


7874 350 adhesive for performance applications that 2.3 PET, Matte White 54" Thermalrequire thermal transfer printing and demand 1.8 350 Transferadhesive performance on difficult to stick 3.2 50# Densified Kraftto surfaces, e.g. HSE plastics or powder coats.

7874FL 350 adhesive for performance applications that 2.3 PET, Matte White 54" Thermalrequire thermal transfer printing and demand 1.8 350 Transferadhesive performance on difficult to stick to 1.5 Polyestersurfaces, e.g. HSE plastics or powder coats.Features a 1.5 mil PET liner for rotary processing.

7882HL Excellent for applying at temperatures below 50F. 2.3 PET, Matte White 54" Dot MatrixHeavy adhesive coat weight is ideal for textured 2.0 400surfaces. 4.6 80# Clay Coated Kraft 6", 13-1/2", 27"

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

*

UL

ULCSA

ULCSA

ULCSA

* Passes BS-5609 standard



16/88

16




Liner

Polyester 7880 Matte top-coat resists scuffing, chemicals and 2.3 PET, Matte White 54" Dot Matrixmoisture. Excellent adhesion to LSE plastics. 0.8 300

Matte White Liner perforates and fan-folds easily. 3.2 50# Densified Kraft 6", 13-1/2", 27"continued

7880HL Heavy liner version of 7880 label stock for 2.3 PET, Matte White 54" Dot Matrixexcellent liner stability in high humidity. 0.8 300

4.6 80# Clay Coated Kraft 6" , 13-1/2" , 27"

7907 350 adhesive for performance applications that 2.3 PET, Matte White 54" Thermalrequire thermal transfer printing and demand adhesive 1.8 350 Transferperformance on difficult to stick to surfaces, e.g. HSE 6.8 94# Densified Kraftplastics or powder coats. Features a 90# DK linerfor sheet processing and screen printing.

Polyester 5771 Thermal transfer printable facestock with high 2.0 PET, Gloss White 54" Thermalstability adhesive. Offers permanent adhesion 1.0 550 Transfer

Gloss White levels, yet is cleanly removable from many surfaces. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7331 High abrasion and solvent resistance. Good for 2.0 PET, Gloss White 54" Pressindoor and outdoor use. Excellent bond to LSE 0.8 300plastics. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7331FL Same as 7331 label stock with film liner for 2.0 PET, Gloss White 54" Pressautomatic application equipment. 0.8 300

1.5 Polyester Film 6", 13-1/2", 27"

7816 Offers excellent durability. Film adhesive that 2.0 PET, Gloss White 54" Thermalresists oozing. 0.8 310 Transfer

3.2 50# Densified Kraft 6", 13-1/2", 27"

7816FL Same as 7816 label stock, except with polyester 2.0 PET, Gloss White 54" Transferliner. 0.8 310 Transfer

1.5 Polyester Film 6", 13-1/2", 27"

7817 Same as 7816, except with HP-395 adhesive. 2.0 PET, Gloss White 54" ThermalOffers good adhesion to a variety of surfaces. 1.1 HP-395 Transfer

3.2 50# Densified Kraft 6", 13-1/2", 27"

7830 Good abrasion and chemical resistance. Thin label 1.0 PET, Gloss White 54" Pressprofile provides good performance on small diameter 0.8 400packages. Excellent cold temperature performance. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7860 Durable facestock for harsh environments. 2.0 PET, Gloss White 54" ThermalExcellent adhesion to LSE plastics. 0.8 300 Transfer

3.2 50# Densified Kraft 6", 13-1/2", 27"

7864 Thin label profile provides good performance on 1.0 PET, Gloss White 54" Thermalsmall diameter packages. Performs well at low 0.8 400 Transfertemperatures. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7868 Excellent high temperature resistance. 2.0 PET, Gloss White 54" ThermalExcellent adhesion to LSE plastics and smooth 1.1 350 Transferpowder coats. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7871 Heavy adhesive coat weight for textured surfaces. 2.0 PET, Gloss White 54" ThermalExcellent high temperature resistance. Excellent 1.8 350 Transferadhesion to LSE plastics and powder coats. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7871FL Same as 7871 label stock, except with film liner. 2.0 PET, Gloss White 54" Thermal1.8 350 Transfer1.5 Polyester Film 6", 13-1/2", 27"

8418 Ideal for fuel line identification. Meets MIL-T-9906C 1.0 PET, Gloss White 48" Presswhen used with 8417 overlaminating film. 1.4 100

2.5 40# Densified Kraft

UL

ULCSA

ULCSA

ULCSA

ULCSA

CSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULM*

* Meets L-T-100B Type I and Mil-T-9906C



17/88

17



Liner

Polyester 7745FL Dot-matrix imprintable matte top-coat. 1.3 PET, Matte Clear 54" Over-Ideal where variable information is needed. 0.8 400 laminate

Matte Clear 1.5 Polyester Film 6", 13-1/2", 27" Dot Matrix

7845TL Matte top-coat provides good chemical and 1.3 PET, Matte Clear 54" Laserabrasion resistance. Excellent adhesion to HSE 0.8 310plastics and metals. Good adhesion to LSE plastics. 3.7 50# Clay Coated Kraft 8-7/16", 27"

7881 Matte top-coat provides good chemical and 2.3 PET, Matte Clear 54" Dot Matrixabrasion resistance. Excellent adhesion to LSE 0.8 300plastics. 3.2 50# Densified Kraft 6", 13-1/2", 27"

Polyester 7350 Offers high abrasion and solvent resistance. 2.0 PET, Gloss Clear 54" PressExcellent adhesion to LSE plastics. Ideal for indoor 0.8 300

Gloss Clear and outdoor applications. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7350FL Same as 7350 label stock with film liner for 2.0 PET, Gloss Clear 54" Pressautomatic application equipment. 0.8 300

1.5 Polyester Film 6", 13-1/2", 27"

7740 Excellent adhesion to LSE plastics. Excellent flag 1.5 PET, Gloss Clear 54" Press

resistance on small diameter vials. Excellent 0.8 320abrasion resistance and good chemical resistance. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7753 Excellent clarity of both facestock and adhesive. 1.5 PET, Gloss Clear 54" PressIdeal for replacing directly imaged containers. 0.8 400Ideal for pharmaceutical and cosmetic applications. 1.5 Polyester Film 6", 13-1/2", 27"

7831 Thin label profile provides good performance 1.0 PET, Gloss Clear 54" Presson small diameter packages. Excellent cold 0.8 400temperature performance. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7861 Ideal as an overlaminate where thermal printing is 2.0 PET, Gloss Clear 54" Thermalneeded. Excellent adhesion to LSE plastics. 1.8 300 Transfer

3.2 50# Densif ied Kraft 6", 13-1/2", 27"

7876 Heavy adhesive coat weight for textured surfaces. 2.0 PET, Gloss Clear 54" Thermal

Excellent high temperature resistance. Excellent 1.8 350 Transferadhesion to LSE plastics and powder coats. 3.2 50# Densif ied Kraft 6", 13-1/2", 27"

Polyester 7222 Offers high abrasion and chemical resistance. 2.0 PET, Matte Silver 54" PressExcellent quick stick and bond to LSE plastics. 0.8 300

Matte Silver Uses include instruction and schematic panels. 3.2 50# Densified Kraft 6", 13-1/2" , 27"

7813 Ultra-smooth matte top-coat. Excellent durability 3.3 PET, Matte Silver 54" Thermalwith a wide variety of ribbons. Excellent adhesion 0.8 300 Transferto LSE plastics. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7818 Compatible with a wide range of ribbons. Firm 3.3 PET, Matte Silver 54" Thermaladhesive that resists oozing. Excellent durability. 0.8 310 Transfer

3.2 50# Densif ied Kraft 6", 13-1/2", 27"

7826 Good abrasion and chemical resistance. Thin 1.0 PET, Matte Silver 54" Presslabel profile provides good performance on small 0.8 400

diameter packages. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7853HL Excellent for textured surfaces. High-temperature 3.3 PET, Matte Silver 54" Dot Matrixadhesive. 3.5 200


ULCSA

UL

ULCSA

ULCSA

CSA

UL

ULCSA

ULCSA

UL

CSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA




18/88

18




Liner

Polyester 7865 Machined matte facestock provides excellent 2.0 PET, Matte Silver 54" Thermaldurability for harsh environments. 0.8 300 Transfer

Matte Silver 3.2 50# Densif ied Kraf t 6", 13-1/2", 27"continued

7879FL Heavy adhesive coat weight for textured surfaces. 3.3 PET, Matte Silver 54" ThermalExcellent adhesion to LSE plastics and powder 1.8 350 Transfercoating. 1.5 Polyester Film 6", 13-1/2", 27"

7883 Matte top-coat resists scuffing, chemicals, and 3.3 PET, Matte Silver 54" Dot Matrixmoisture. Excellent adhesion to LSE plastics. 0.8 300Liner can be perforated and fan-folded easily. 3.2 50# Densified Kraft 6" , 13-1/2", 27"

7883HL Heavy liner version of 7883 label stock for 3.3 PET, Matte Silver 54" Dot Matrixsuperior liner stability in high humidity. 0.8 300


7887 Same as 7883 label stock except thinner facestock. 2.3 PET, Matte Silver 54" Dot Matrix0.8 3003.2 50# Densif ied Kraf t 6", 13-1/2", 27"

7897 Firm adhesive resists oozing. Liner perforates and 2.3 PET, Matte Silver 54" Dot Matrixfan-folds easily. 0.8 310

3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

Polyester 7323 Excellent abrasion and chemical resistance. 2.0 PET, Bright Silver 54" PressExcellent adhesion to LSE plastics. 0.8 300

Bright Silver 3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

7324 Excellent abrasion and chemical resistance. 1.5 PET, Bright Silver 54" PressExcellent flagging resistance. Used for indoor and 0.8 320outdoor applications. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7822 Good abrasion and chemical resistance. Good 1.0 PET, Bright Silver 54" Presslong-term aging performance. Excellent cold 0.8 400temperature performance. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7863 Excellent adhesion to LSE plastics. 2.0 PET, Bright Silver 54" Thermal

0.8 300 Transfer3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

7873 Heavy adhesive coat weight for textured surfaces. 2.0 PET, Bright Silver 54" ThermalExcellent high temperature resistance. Excellent 1.8 350 Transferadhesion to LSE plastics and powder coats. 3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

Polyester 7828 Good abrasion and chemical resistance. Thin label 1.0 PET, Brushed Silver 54" Pressprofile provides good performance on small diameter 0.8 400

Brushed Silver packages. Excellent cold temperature performance. 3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

Polyester 7325 Offers high abrasion and chemical resistance. 2.0 PET, Bright Gold 54" PressExcellent quick stick and bond to LSE plastics. 0.8 300

Bright Gold Uses include instruction and schematic panels. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7867 Good abrasion and chemical resistance. Used for 2.0 PET, Bright Gold 54" Thermaldecorative applications. 0.8 300 Transfer

3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

UL

CSA

ULCSA

ULCSA

ULCSA

ULCSA



19/88

19




Liner

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

UL

ULCSA

UL

UL

ULCSA

ULCSA

UL

M*

ULCSA

(pending

Polyester 5772 Thermal transfer printable with high stability 2.0 PET, Platinum 54" Thermaladhesive. Offers permanent adhesion levels yet 1.0 550 Transfer

Platinum is removable from many surfaces. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7819 Durable facestock that is thermal transfer printable. 2.0 PET, Platinum 54" ThermalHP-395 adheres well to various surfaces. 1.1 HP-395 Transfer

3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

7872 Heavy adhesive coat weight for textured surfaces. 2.0 PET, Platinum 54" ThermalExcellent adhesion to LSE plastics and powder 1.8 350 Transfercoats. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7872FL Same as 7872 label stock, except with film liner. 2.0 PET, Platinum 54" Thermal1.8 350 Transfer1.5 Polyester Film 6", 13-1/2", 27"

7875 Durable facestock for harsh environments. Firm 2.0 PET, Platinum 54" Thermaladhesive resists oozing. 0.8 310 Transfer

3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

Polyester 7381 Used for closures in packaging of OTC drugs. 2.0 PET, Gloss White 54" Press,

VOID Tamper- Facestock resists harsh environments. 0.8 300 Thermalindicating 3.2 50# Densif ied Kraf t 6", 13-1/2", 27" Transfer

Gloss White 7866 Same as 7381 label stock with top-coat for 2.0 PET, Gloss White 54" Thermalthermal transfer printing. 0.8 300 Transfer

3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

Polyester 7380 Tamper evident VOID. Ideal for security rating 2.3 PET, Matte White 48" Dot MatrixVOID Tamper- plates and certification plates. 0.8 300Indicating 3.2 50# Densif ied Kraf t 6", 12", 24"

Matte White 7385 Tamper evident VOID. Excellent flagging 2.3 PET, Matte White 48" Dot Matrixresistance. 1.0 320

3.2 50# Densif ied Kraf t 6", 12", 24"

7385PB Tamper evident VOID. Same as 7385 label stock 2.3 PET, Matte White 48" Dot Matrixwith piggyback adhesive for tipping onto forms. 1.0 320

3.2 50# Densif ied Kraf t 6", 12", 24"Second adhesive 1.0 320Second liner 3.2 50# Densified Kraft

Polyester 7384 Ideal for security closures of packaged products. 2.0 PET, Bright Silver 48" ThermalVOID Tamper- Ideal for warning labels. 0.8 300 Transferindicating 3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

Bright Silver 7389 Adhesive provides excellent resistance to flagging 2.0 PET, Bright Silver 48" Thermalon small diameter vials. 1.0 320 Transfer

3.2 50# Densif ied Kraf t 6", 13-1/2", 27"

Vinyl 3690E Durable coat film flexible and conformable. 2.0 Vinyl, Bright White (nc) 24" ThermalOutstanding weathering properties. 1.0 320 Transfer

White Non-transferable on some surfaces. 3.2 90g/sm glassine

7600 Top-coated, high bond, but offers clean 3.4 Soft White Gloss (TC) 54" Press

removability on most surfaces for up to one year. 1.0 500Excellent for plasticizer resistance. 2.5 40# Densified Kraft 6", 13-1/2", 27"

7604FP Top-coated, conformable to contoured surfaces. 3.4 Flexible White (TC) 54" PressConsistence, high-speed dispensing. Excellent 1.0 300squeeze bottle performance. 3.2 50# Densified Kraft 6", 13-1/2", 27"

* Meets PPP-T-66E Type II



20/88

20




Liner

Vinyl 7605 Conformable to contoured surfaces. 3.4 Flexible White (NTC) 54" PressExcellent adhesion to LSE plastics and textured 1.8 350

White powder coats. 3.2 50# Densified Kraft 6", 13-1/2", 27"continued

7620 Can be used on r igid and semi-r igid containers. 3.5 Rigid White Gloss (TC) 54" PressExcellent for general purpose labeling such as 0.9 300drum labels. 3.2 50# Densified Kraft 6", 27"

7884 Long-term holding both indoor and outdoor. 3.7 Soft Matte White (TC) 54" Dot MatrixProvides clean removability on a variety of surfaces. 1.0 500Adhesive provides good plasticizer resistance. 3.2 50# Densified Kraft 6", 13-1/2" , 27"

7890 Excellent adhesion to LSE plastics. 3.4 Rigid White Gloss (TC) 54" Thermal0.9 300 Transfer3.2 50# Densified Kraft 6", 13-1/2", 27"

7901 Non top-coated. High bond, but offers clean 3.5 Soft White Gloss Sheet - 20" x 27" Press,removability on most surfaces for up to one year. 1.0 500 Roll - 27" x 750' ScreenExcellent for plasticizer resistance. 6.8 94# Polycoated Kraft

7902 Non top-coated. Conformable to contoured 3.4 Flexible White (NTC) Sheet - 20" x 27" Press,

surfaces Heavy lay-flat liner, ideal for screen 1.0 300 Roll - 27" x 750' Screenprinting. 6.8 94# Polycoated Kraft

7904 Conformable to contoured surfaces. 3.4 Flexible White (NTC) Sheet - 20" x 27" Press,Excellent adhesion to LSE plastics and textured 1.8 350 Roll - 27" x 750' Screenpowder coats. 3.2 94# Polycoated Kraft

Vinyl 7603 Can be used on rigid and semi-rigid containers. 4.0 Soft Clear Gloss (NTC) 54" PressExcellent for general purpose labeling such as 1.0 300

Soft Clear drum labels. 2.5 40# Densified Kraft 6", 13-1/2", 27"

Vinyl 3698E Durable coat film, flexible and conformable. 2.0 Vinyl, Matte Silver (nc) 24" ThermalOffers outstanding weathering properties. 1.0 320 Transfer

Silver Non-transferable on some surfaces. 3.2 90 g/sm glassine

Vinyl Tamper- 7885 Fragile vinyl facestock destructs easily. Excellent 2.2 Matte White 48" Dot Matrixindicating adhesion to metals, HSE plastics, and a variety of 0.8 200paints. Dot-matrix imprintable. 3.2 50# Densified Kraft 6", 12", 24"

Matte White

Vinyl 7613 Resists one-piece removal. Facestock fractures 2.0 White (NTC) 48" ThermalDestructible and tears easily. Excellent adhesion to powder 0.8 350 TransferTamper- coatings, LSE plastics, and oily metals. 3.2 50# Densified Kraft 6", 12", 24"indicating

White

Retro-reflective 3929 When bar code printed, the facestock extends the 4.8 Bright Silver 24" Thermalmaximum scanning distance of long range 1.0 200 Transfer

Bright Silver scanners. Excellent for bin labels or shelf markers. 4.5 80# Clay Coated Kraft 6", 12"

Aluminum Foil 7800 Vinyl top-coated for ink receptivity. Heavy adhesive 2.0 Matte Silver 40" Press

coat weight suitable for textured surfaces. 1.7 320Silver Excellent adhesion to LSE plastics. 3.3 60# Densified Kraft 6-1/2", 13-1/4", 20"

UL

UL

UL

UL

UL

CSA

ULCSA

ULCSA

ULCSA

UL

CSA



21/88

21




Liner

Aluminum Foil 7801 Vinyl top-coated for ink receptivity. Heavy adhesive 2.0 Bright Silver 40" Presscoat weight ideal for textured surfaces. Excellent 1.7 320

Silver adhesion to LSE plastics. 3.3 60# Densified Kraft 6-1/2", 13-1/4", 20"continued

7804 Vinyl top-coated for ink receptivity. Excellent for 2.0 Matte Silver 40" Pressrough or textured surfaces. High-temperature 3.5 200resistant adhesive. 3.3 60# Densified Kraft 6-1/2", 13-1/4", 20"

Polyolefin 7293 Good conformability. 7.0 Teslin, Matte White 54" Press0.9 AP-360

White 3.2 50# Densified Kraft

7841 Excellent toner anchorage. Good conformability. 7.0 Teslin, Matte White 54" Laser,Good print contrast when bar coding. 0.8 310 Dot Matrix

3.2 50# Densified Kraft 6", 13-1/2", 27"

Polyolefin 7286 Smudge-proof top coat. Good for general purpose 3.7 Kimdura, White (TC) 54" Thermalapplications. 0.9 AP-360 Transfer

Smudge-proof 4.5 80# Clay Coated KraftWhite

7291 Smudge-proof top coat. Good for general purpose 3.7 Kimdura, White (TC) 54" Thermal

applications. Can be printed by dot-matrix, thermal 0.9 AP-360 Transfertransfer, and ion deposition. 3.2 50# Densified Kraft

Polypropylene 7776 Light duty facestock with firm adhesive that 2.6 Label-Lyte, White 54" Thermalresists oozing. 0.8 310 Transfer

White 3.2 50# Densified Kraft 6", 13-1/2", 27"

7777 Corona treated. Bright white facestock offers high 2.6 Label-Lyte, White 54" Thermalopacity. Film stiffness allows for easy die cutting 0.9 AP-360 Transferand dispensing for automatic applications. Can be 3.2 50# Densified Kraft 6", 13-1/2", 27"thermal transfer printed with resin ribbon.

7778 Same as 7777 except with 300 adhesive. 2.6 Label-Lyte, White 54" ThermalAdhesive offers excellent adhesion to LSE plastics. 0.8 300 Transfer

3.2 50# Densi fied Kraf t 6", 13-1/2", 27"

7779 Same as 7777 except with 350 adhesive. 2.6 Label-Lyte, White 54" ThermalExcellent adhesion to powder coats and 1.1 350 TransferLSE plastics. 3.2 50# Densified Kraft 6", 13-1/2", 27"

7783 Corona treated. Bright white facestock offers high 2.6 Label-Lyte, White 54" Thermalopacity. Filmstiffness allows for easy die cutting 1.1 AP-380 Transferand dispensing for automat ic applications. 3.2 50# Densified Kraft 6", 13-1/2", 27"

Polypropylene 7774 Top-coated. Film allows for easy die cutting and 2.0 Gloss Clear (TC) 54" Pressdispensing. Ultra clear adhesive offers excellent 0.7 UC-50

Clear adhesion to a wide variety of surfaces. 3.2 50# Densified Kraft 6", 13-1/2", 27"

Acetate 7710 High clarity and wet out for the no label look. 3.0 Acetate, Gloss Clear 48" PressGood aging, excellent dispensability and die cutting. 0.8 400

Clear Recommended for indoor applications. 2.5 40# Densified Kraft 6", 12", 24"

7722 High clarity and wet out for the no label look. 2.0 Acetate, Gloss Clear 48" Press

Good aging, excellent dispensability and die cutting. 0.7 UC-50Recommended for indoor applications. 2.5 40# Densified Kraft

7723 Adhesive remains clear for years. Good aging, 2.0 Acetate, Matte Clear 48" Pressexcellent dispensability and die cutting. 0.7 UC-50Recommended for indoor applications. 2.5 40# Densified Kraft

Teslin is a trademark of PPG Industries.Kimdura is a trademark of Kimberly Clark Corp.Label-Lyte is a trademark of Mobil Chemical Co.

ULCSA

ULCSA

ULCSA

UL

CSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA



22/88

22




Liner

Polyimide 7811 Offers ultra-high temperature performance. Easy 3.0 Kapton, Matte White 12" Dot Matrixreadability of variable information and bar codes. 2.0 100

Matte White 3.2 50# Densified Kraft 6"

7811FL Same as 7811 except with polyester liner. 3.0 Kapton, Matte White 6" Dot Matrix2.0 1001.5 Polyester Film

7812 Offers ultra-high temperature performance. Easy 3.0 Kapton, Matte White 12" Thermalreadability of bar codes. Thermal transfer printable. 2.0 100 Transfer

3.2 50# Densified Kraft 6"

Acrylate 3921 Offers ultra-high temperature performance. 2.0 Matte White 48" ThermalThermal transfer printable. 1.0 150 Transfer

3.2 50# Densified Kraft 6", 12", 24"

7846 Same as 7847, except gloss black top layer. 2.4 Gloss Black/White 48" LaserWhite revealed after imaging. 1.2 350 Etch

3.2 50# Densified Kraft 3-1/2, 4-3/4", 24"

7847 Excellent temperature, chemical, and environ- 2.4 Matte Black/White 48" Lasermental resistance. Two-layered film construction 1.2 350 Etchprovides excellent long-term performance. Excellent 3.2 50# Densified Kraft 3-1/2, 4-3/4", 24"adhesion to LSE plastics. Brittle facestock providesdestructibility on some substrates.

7848 Same as 7847 except matte silver top layer. 2.4 Matte Silver/Black 48" LaserBlack image revealed after imaging. 1.2 350 Etch

3.2 50# Densified Kraft 3-1/2, 4-3/4", 24"

Recycling 8000 Recycling-compatible label stock for PC, PS, ABS 3.2 ABS, Matte Satin 23 1/2" ThermalCompatible and blends of PC, PS and ABS. 0.8 350 TransferWhite 3.0 80 g/sm glassine 6", 12'

Kampton is a trademark of Dupont Corp.

ULCSA

UL

CSA

ULCSA

ULCSA

UL

ULCSA

ULCSA

ULCSA

22





Liner

Kampton is a trademark of Dupont Corp.

ULCSA

UL

CSA

ULCSA

ULCSA

UL

ULCSA

ULCSA

ULCSA

Polyimide 7811 Offers ultra-high temperature performance. Easy 3.0 Kapton, Matte White 12" Dot Matrixreadability of variable information and bar codes. 2.0 100

Matte White 3.2 50# Densified Kraft 6"

7811FL Same as 7811 except with polyester liner. 3.0 Kapton, Matte White 6" Dot Matrix2.0 1001.5 Polyester Film

7812 Offers ultra-high temperature performance. Easy 3.0 Kapton, Matte White 12" Thermalreadability of bar codes. Thermal transfer printable. 2.0 100 Transfer

3.2 50# Densified Kraft 6"

Acrylate 3921 Offers ultra-high temperature performance. 2.0 Matte White 48" ThermalThermal transfer printable. 1.0 150 Transfer

3.2 50# Densified Kraft 6", 12", 24"

7846 Same as 7847, except gloss black top layer. 2.4 Gloss Black/White 48" LaserWhite revealed after imaging. 1.2 350 Etch

3.2 50# Densified Kraft 3-1/2", 4-3/4", 24"

7847 Excellent temperature, chemical, and environ- 2.4 Matte Black/White 48" Lasermental resistance. Two-layered film construction 1.2 350 Etchprovides excellent long-term performance. Excellent 3.2 50# Densified Kraft 3-1/2", 4-3/4", 24"adhesion to LSE plastics. Brittle facestock providesdestructibility on some substrates.

7848 Same as 7847 except matte silver top layer. 2.4 Matte Silver/Black 48" LaserBlack image revealed after imaging. 1.2 350 Etch

3.2 50# Densified Kraft 3-1/2", 4-3/4", 24"

Recycling 8000 Recycling-compatible label stock for PC, PS, ABS 3.2 ABS, Matte Satin 23 1/2" ThermalCompatible and blends of PC, PS and ABS. 0.8 350 TransferWhite 3.0 80 g/sm glassine 6", 12"

Polyester 7340FL Non-metallic reflective mirror film, 2.55 Mirrored Polyester 48" ThermalRadiant more brilliant than gloss silver polyester. 1.1 350 TransferMirror 2.0 Polyester 5", 12", 24"

Polyester 7360FL Eye-catching color shift film: 1.15 Colored Polyester 54" ThermalRadiant blue, magenta, gold shift. 1.1 350 TransferColor 2.0 Polyester 6", 13 1/2", 27"

7361FL Eye-catching color shift film: 1.9 Colored Polyester 54" Thermalcyan, blue, magenta shift. 1.1 350 Transfer

2.0 Polyester 6", 13 1/2", 27"


23/88

23

3MRoll Label Materials Pharmaceutical and Performance Paper



Liner

High-Gloss 7002 Facestock provides excellent graphic reproductions. 2.8 60# Bright White 60" PressPaper Excellent flag resistance on small diameter vials. 0.9 320

2.5 40# Densified Kraft 6", 12", 30"Bright White

7004 Excellent quick stick and adhesion to low surface 2.8 60# Bright White 60" Pressenergy plastics. 0.9 3002.5 40# Densified Kraft 6", 12", 30"

High-Gloss 7000 High-gloss for fine printing. Adheres well to 4.0 60# White 60" PressPaper curved surfaces. 0.9 320

2.5 40# Densified Kraft 6", 12", 30"White

7000FP Same as 7000, except a 50# densified kraft liner. 4.0 60# White 60" Press0.9 3203.2 50# Densified Kraft 6", 12", 30"

7000PL Same as 7000, except with a polypropylene liner. 4.0 60# White 60" Press0.9 3202.0 Polypropylene Film 6", 12", 30"

7000FL Same as 7000 with film liner. 4.0 60# White 60" Press

0.9 3201.5 Polyester Film 6", 12", 30"

7050 High-gloss for fine printing. Adheres to low 4.0 60# White 48" Presssurface energy plastics. 0.9 700

2.5 40# Densified Kraft 6", 12", 24"

Litho 7014 Excellent flag resistance to small diameter vials. 1.9 40# Coated White 60" Press0.9 320

Coated White 2.5 40# Densified Kraft 6", 12", 30"

7014FP Same as 7014 with 50# densified Kraft liner. 1.9 40# Coated White 60" Press0.9 3203.2 50# Densified Kraft 6", 12", 30

7014PL Same as 7014 with a polypropylene liner. 1.9 40# Coated White 60" Press0.9 3202.0 Polypropylene Film 6", 12", 30

7014FL Same as 7014 with a polyester film liner. 1.9 40# Coated White 60" Press0.9 3201.5 Polyester Film 6", 12", 30

7109 Ideal to adhere to wet or damp surfaces. 3.1 60# Coated White 48" PressMeets TAPPI #213 spec for repulpability. 0.9 1100Not recommended for use with water-based inks. 2.5 40# Densified Kraft 6", 12", 24"

7142 Good thermal transfer printable facestock. Can be 3.5 50# Coated White 48" Thermalremoved cleanly or repositioned on most 0.4 1000 Transfersubstrates. 2.5 40# Kraft Glassine 6",12",24"

Litho 7113 Ideal for data-processing applications. Can be 4.0 46# Uncoated White 48" PressUncoated cleanly removed and repositioned on most 0.4 1000

White surfaces. 3.2 50# Densified Kraft 6", 12", 24"

UL*

UL*

UL*

UL*

* Can be used to display the UL listing mark, but each case must be reviewed and approved by UL follow-up services before use.



24/88

24

3MRoll Label Materials Pharmaceutical and Performance Paper



Liner

Litho Tamper- 7011 Excellent flag resistance on small diameter vials. 2.3 32# Coated White 60" Pressindicating Used for unit dose pharmaceutical packages. 0.9 320

2.5 40# Densified Kraft 6", 12", 30"Coated White

7011FP Same as 7011 with a 50# densified kraft liner. 2.3 32# Coated White 60" Press0.9 3203.2 50# Densified Kraft 6", 12", 30"

7011PL Same as 7011 with a polypropylene film liner. 2.3 32# Coated White 60" Press0.9 3202.0 Polypropylene Film 6", 12", 30"

7011FL Same as 7011 with a polyester film liner. 2.3 32# Coated White 60" Press0.9 3201.5 Polyester Film 6", 12", 30"

Litho Tamper- 7110 Readily fractures or delaminates. Ideal for 2.8 40# Uncoated White 60" Pressindicating tamper-resistant labeling. Provides write-on capability. 1.1 320

2.5 40# Densified Kraft 6", 12", 30"UncoatedWhite 7110FP Same as 7110 with a 50# densified kraft liner. 2.8 40# Uncoated White 60" Press

1.1 3203.2 50# Densified Kraft 6", 12", 30"

7110PL Same as 7110 with a polypropylene film liner. 2.8 40# Uncoated White 60" Press1.1 3202.0 Polypropylene Film 6", 12", 30"

7110FL Same as 7110 with a polyester film liner. 2.8 40# Uncoated White 60" Press0.9 3201.5 Polyester Film 6", 12", 30"

Saturated 7120 Conforms to curved surfaces. Resists staining and 3.5 60# Semi-gloss White 60" PressLatex- moisture. Adheres to many textured surfaces. 1.3 400impregnated 2.5 40# Densified Kraft 6", 12", 30"

Semi-gloss 7122 High-initial and ultimate adhesion to a variety of 3.5 60# Semi-gloss White 60" PressWhite medium and low surface energy substrates. 0.9 320

Conforms to curved surfaces and offers good 2.5 40# Densified Kraft 6", 12", 30"moisture resistance.

Saturated 7116 Can be cleanly removed and repositioned on most 3.3 47# White 48" PressLatex- surfaces. 0.4 1000impregnated 3.2 50# Densified Kraft 6", 12", 24"

Smudge-proofWhite

UL*

UL*

UL*

UL*

* Can be used to display the UL listing mark, but each case must be reviewed and approved by UL follow-up services before use.



25/88


26/88

26

3MSheet Label Materials


Facestock Product Typical Performance Characteristics Construction Master Print SpecsCaliper Facestock Size MethodMils Adhesive

Liner

Polyester 7925 Offers high abrasion and solvent resistance. Excellent 2.0 PET, Bright Gold Sheet - 20"x 27" Screenquick stick and bond to smooth LSE plastics. 0.8 300 Roll - 27"x 750'

Gold Uses include instruction and schematic panels 6.7 94# Polycoated Kraft

Vinyl Tamper- 7930 Resists one piece removal. Facestock fractures and 2.0 White (NTC) Sheet - 20"x 27" Screenindicating tears easily. Excellent adhesion to powder coatings, 0.8 350 Roll - 27"x 750'

LSE plastics, and oily metals. 6.7 94# Polycoated KraftWhite

Polyester 7935 Facestock resists harsh environments. Heavy 2.0 PET, Gloss White Sheet - 20"x 27" ScreenVOID Tamper- lay-flat liner. Ideal for screen printing. 0.8 300 Roll - 27"x 750'indicating 6.7 94# Polycoated Kraft

White 7937 Ideal for security rating plates and certi fication 2.3 PET, Matte White Sheet - 20"x 27" Screenplates. Heavy lay-flat liner. Ideal for screen printing. 0.8 300 Roll - 27"x 750'

6.7 94# Polycoated Kraft

Vinyl 7901 Non top-coated. High bond, but offers clean 3.4 Soft White Gloss (NTC) Sheet - 20"x 27" Screen,removability on most surfaces for up to one year. 1.0 500 Roll - 27"x 750' Press

White Excellent for plasticizer resistance. 6.7 94# Polycoated Kraft

7902 Non top-coated. Conformable to contoured 3.4 Flexible White (NTC) Sheet - 20"x 27" Screen,surfaces. Heavy lay-flat liner. Ideal for screen 1.0 300 Roll - 27"x 750' Pressprinting. 6.7 94# Polycoated Kraft

7904 Conformable to contoured surfaces. 3.4 Flexible White (NTC) Sheet - 20"x 27" Screen,NEW Excellent adhesion to LSE plastics and textured 1.8 350 Roll - 27"x 750' Presspowder coats. 6.7 94# Polycoated Kraft

7910P Non top-coated. Semi-flexible vinyl offers good 3.5 Rigid White (NTC) Sheet - 20"x 27" Screenconformability. Permanent adhesive bonds to a 0.8 AP-360 Roll - 27"x 750'variety of surfaces 6.7 94# Polycoated Kraft

Aluminum Foil 7940 Vinyl top-coated for ink receptivity. Heavy adhesive 2.0 Matte Silver Sheet - 20"x 27" Screen,coat weight suitable for textured surfaces. 1.7 320 Press

Silver 6.7 94# Polycoated Kraft

7941 Vinyl top-coated for ink receptivity. Excellent for 2.0 Matte Silver Sheet - 20"x 27" Screen,rough or textured surfaces. High temperature 3.5 200 Pressresistant adhesive. 6.7 94# Polycoated Kraft

7942 Vinyl top-coated for ink receptivity. Heavy adhesive 2.0 Bright Silver Sheet - 20"x 27" Screen,coat weight suitable for textured surfaces. 1.7 320 PressExcellent adhesion to LSE plastics. 6.7 94# Polycoated Kraft

ULCSA

ULCSA

UL

UL

UL

ULCSA

ULCSA

ULCSA

ULCSA



27/88

27

3M Overlaminating Films


Liner

Polyester 7732FL Non top-coated. Film liner provides excellent 1.0 PET, Matte Clear (NTC) 54" Pressclarity. Ideal for metalized or dark colors. Excellent 0.8 400

Matte Clear durability and UV resistance. 1.5 Polyester Film 6", 13-1/2", 27"

7742 Non top-coated. For general purpose overlaminating. 1.0 PET, Matte Clear (NTC) 54" PressExcellent abrasion, chemical, and UV resistance. 0.8 400

2.5 40# Densified Kraft 6", 13-1/2", 27"

7744 Thermal transfer printable matte top-coat. 1.3 PET, Matte Clear 54" ThermalIdeal where variable informat ion is needed. 0.8 400 Transfer

2.5 40# Densified Kraft 6", 13-1/2", 27"

7744FL Same as 7744 except with film liner for smoother 1.3 PET, Matte Clear 54" Thermaladhesive appearance. 0.8 400 Transfer

1.5 Polyester Film 6", 13-1/2", 27"

7745FL Dot-matrix imprintable matte top-coat. Ideal where 1.3 PET, Matte Clear 54" Dot Matrixvariable information is needed. 0.8 400

1.5 Polyester Film 6", 13-1/2", 27"

7782 Non top-coated, matte version of 7784. 1.0 PET, Matte Clear (NTC) 54" Dot Matrix

0.7 UC-503.4 40# Polycoated 6", 13-1/2", 27"

Kraft

Polyester 7730FL Non top-coated. Film liner offers excellent graphic 1.0 PET, Gloss Clear (NTC) 54" Pressappearance. Ideal for metalized or dark colors. 0.8 400

Gloss Clear Excellent durability and UV resistance. 1.5 Polyester Film 6", 13-1/2", 27"

7731FL Non top-coated. Same as 7730FL, except with 2.0 PET, Gloss Clear (NTC) 54" Press2.0 mil facestock. 0.8 400

1.5 Polyester Film 6", 13-1/2", 27"

7741 Non top-coated. For general purpose overlaminating. 1.0 PET, Gloss Clear (NTC) 54" PressExcellent abrasion, chemical, and UV resistance. 0.8 400

2.5 40# Densified Kraft 6", 13-1/2", 27"

7743FL Non top-coated. Same as 7730 FL, except 4.0 mil 4.0 PET, Gloss Clear (NTC) 54" Pressfacestock. 0.8 4001.5 Polyester Film 6", 13-1/2", 27"

7784 Non top-coated, gloss version of 7782. 1.0 PET, Gloss Clear (NTC) 54" Press0.7 UC-503.4 40# Polycoated

Kraft

8415 Non top-coated. Self wound and used when a liner 1.0 PET, Gloss Clear (NTC) 48" Pressis not wanted. Excellent abrasion and UV resistance. 0.5 400

8417 Non top-coated. Ideal for fuel line identification. 1.0 PET, Gloss Clear (NTC) 48" PressMeets MIL-T-9906C when used with 8418 press 1.2 100printable film label stock.

Polypropylene 8051 Non top-coated. Economical self wound film for 1.2 PP, Clear (NTC) 48" Press

general purpose applications. Good chemical 0.5 700Clear resistance. Not recommended for prolonged

outdoor applications.

Acrylate 7735FL Ideal for long term outdoor applications. Special 3.0 Acylar, Gloss Clear 48" PressUV resistant film provides 5 years outdoor durability. 0.8 400

Clear 1.5 Polyester Film 6", 12", 24"

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

ULCSA

UL

ULM*

ULCSA

* Meets L-T-100B Type I and Mil-T-9906C.* Acylar is a 3M trademark for acrylic.




28/88

28

3M Overlaminating Films

*Lexan is a trademark of General Electric Co.Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.

Facestock Product Typical Performance Characteristics Construction Roll Width Print Specs

Caliper Facestock MethodMils Adhesive Type Pre-Slit Widths

Acetate 8041 Gloss overlaminate designed for use with 1.6 Acetate, Gloss Clear 48" Press803 chart tape. 0.7 400

Clear8042 Matte overlaminate designed for use with 1.6 Acetate, Matte Clear 48" Press

803 chart tape. 0.7 400

Polycarbonate 7737FL Used to achieve the attractive appearance of a 3.0 Lexan, Velvet Clear 54" Presssubsurface screen printed polycarbonate. 0.8 400

Velvet Clear 1.5 Polyester Film 6", 12", 27"

7738FL Same as 7737FL, except with 5.0 mil facestock. 5.0 Lexan, Velvet Clear 54" Press0.8 4001.5 Polyester Film 6", 13-1/2", 27"

ULCSA

ULCSA



29/88

29

28

Adhesive Bonding Tapes

29


30/88

30

Adhesive FamiliesAdhesive Bonding Tapes



High peel strength comparedto other acrylic formulations.


Exhibits low outgassingcharacteristics.

100MP Highest Performance Acrylic

Up to 500F short term heatresistance and outstandingsolvent resistance.

Higher peel strength than mostother acrylic formulations.


200 High Performance Acrylic

Up to 350F short term heatresistance and mediumsolvent resistance.

Excellent peel strength onmetal and HSE plastics.

Good long term aging.

200MP High Performance Acrylic


Outstanding adhesion tometal and high surface energy

plastics.

Excellent shear strength toresist slippage and edge lifting.

Short term repositionability forplacement accuracy.

220 Industrial Acrylic

Up to 350F short term heatresistance and good chemicalresistance.

Good shear strength andchemical resistance for general

purpose industrial applications.

Good adhesion to most metaland high surface energy plastics.

290 Low Outgassing Adhesive


Exceeds most OEMspecifications for outgassingand long term performance.

300 High Strength Acrylic


High initial adhesionespecially to low surfaceenergy plastics.

Quick flowing to speedlamination of textured plastics,foams, fabrics, and coated

papers.

300FR Flame Retardant Adhesive

Meets various flame retardancystandards such as UL94 V-O/2,F.A.R. 25.853, and FMVSS 302.

Similar adhesive properties to#300 adhesive family.

Good adhesion to a wide variety ofsurfaces including LSE plastics,foams, and fabrics.

300LSE High Strength Acrylic


Outstanding adhesion to low surfaceenergy plastics, powder coated

paints, and lightly oiled metals.

Good chemical and humidityresistance.

300MP High Strength Acrylic

Up to 250F short term heatresistance for automotiveinterior applications.

Designed especially to bondmost plastics and foams.

Economical attachment ofgraphics.

320 High Tenacity Acrylic


High bond strength to a varietyof surfaces.

Excellent flagging resistanceon small diameter surfaces.

340 High Bond Acrylic


Excellent bonding to foam andother substrates.

High tack medium shear.

350 High-holding Acrylic

Excellent solvent resistanceand adhesion to LSE materials.



Adhesive families have been color

coded to make cross referencing

between charts easier.


31/88

31

Adhesive FamiliesAdhesive Bonding Tapes

360 High Bond Acrylic

High adhesion to most surfaces.


Good plasticizer resistance.

400 High Tack Acrylic


Excellent adhesion to uncoatedpapers.

Clarity and UV resistance forwindow label applications.

Good low temperatureperformance and peel strengthon many surfaces.

420 Acrylic Adhesive


High tack adhesive.

430 Acrylic Adhesive Up to 350F short term heat

resistance.

Lead for high temperature splicing.

700 Series Synthetic Rubber


Good adhesion to lowsurface energy substrates.

For indoor and room

temperature applications.

800 Series Natural Rubber


Offers good adhesion to avariety of surfaces.

For indoor and roomtemperature applications.

900R MiscellaneousRubber Adhesive Group

Excellent initial adhesion andhigh bond to a variety of foams.

Utility rubber-based adhesiveideal for the foam fabricatingindustry.

1000 Repositionable Acrylic

Good holding to manysurfaces.

Clean removal.

2000MP Optically Clear Acrylic

Visual accuracy - lighttransmission > 99%, free ofbirefringence, refractive indexof 1.47.

High cohesive and peel strengths.

High temperature, humidity, andUV light resistance.

Long-term durability withoutyellowing, delaminating, ordegrading.



32/88

32

Adhesive Selection Chart Based on Surface EnergyAdhesive Bonding Tapes

These charts are based on relative adhesion within each given surface energy category.

Metals Surface EnergyDynes/cm

Copper 1103

Aluminum 840

Zinc 753

Tin 526

Lead 543

HSE Surface EnergyPlastics Dynes/cm

Kapton 50

Phenolic 47

Nylon 46

Alkyd Enamel 45

Polyester 43

Epoxy Paint 43

Polyurethane 43

ABS 42

Polycarbonate 42

PVC 39

Noryl 38

Acrylic 38

Polane Paint 38

LSE Surface EnergyPlastics Dynes/cm

PVA 37

Polystrene 36

Acetal 36

EVA 33

Polyethylene 31

Polypropylene 29

Tedlar 28

Teflon 18

Powder Coatings **

**Broad range of surface energy.

Adhesive 1 2 3 4 5 6 7 8 9 10

100

100MP

200

200MP

220

290

300

300FR

300LSE

300MP

320

340

350

360

400

420

430

700

800

900R

1000

Adhesive 1 2 3 4 5 6 7 8 9 10

100

100MP

200

200MP

220

290

300

300FR

300LSE

300MP

320

340

350

360

400

420

430

700

800

900R

1000

Adhesive 1 2 3 4 5 6 7 8 9 10

100

100MP

200

200MP

220

290

300

300FR

300LSE

300MP

320

340

350

360

400

420

430

700

800

9

Documents

3M Adhesive Material Selection Guide