889 www.TPCpage.co.kr DS 시리즈 서브베이스 배관형 시리즈 추가 3·5포트 PILOT형 솔레노이드 밸브 무급유 사용이 가능하며 부품의 정밀가공으로 내구성이 우수함 큰 밸브 용량, 더욱 콤팩트한 사이즈 용량은 대형, 크기는 소형 밸브 몸체는 박형으로 매니폴드화 했을 때 집적 효율이 높고 부착 공간도 작아집니다. 장수명, 고신뢰성 실현 우수한 내열성(125℃) 솔레노이드 인출선은 UL 표준 품 사용 및 코일부를 열경화성 수지로 Molding 저 소비전력 2W(DC)(Lamp 부착) 2W(75mA, DC24V)의 저 소비전력. 경제적이며 전자제어에 충분한 대응 N.C에서 N.O으로 간단히 변경가능 (DS300시리즈) 시리즈 DS3000 DS3000 DS5000 밸브기능 2위치 3위치 싱글 더블 CLOSED CENTER EXHAUST CENTER ○ - - - ○ ○ ○ ○ ○ ○ ○ ○ 몸체형식 A·B포트 크기와 유효단면적mm 2 (Cv값) 소비전력 사용압력 직접 Rc(PT) Rc(PT) Rc(PT) Rc(PT) 밸브폭 (DC) 범위 MPa 배관형 1/8 1/4 3/8 1/2 (mm) W {kgf/cm 2 } ○ 19.2 22 - - 26.4 1.8/2.0 (1.07) (1.2) ○ 14.4 18 - - 26.4 1.8/2.0 0.15~0.9 (0.8) (1.0) {1.5~9} ○ - - 50 58 32 1.8/2.0 (2.8) (3.2) DS시리즈 SAH CR/CV ARD CR/CV AQ2 CR/CV TCM2 CR/CV NGQL CR/CV/SC NLCD TM1 TS1 TM2 TS2 TQ1 TE1 TT1 TR1 TV2 RS1000 RS3000 RS4000 DR100 DR200 SI UNIT DV1000 DV3000 DV4000 DS300 DS3000 DS5000 DS2000 DS6000 DX1 DX2 CR/CV TGQL NBU ACU SE ARM 16번 종합 출력 833~896 2010.8.23 2:22 PM 페이지889 TG 2540DPI 175LPI
%4 ² 3 ìI Ó - DOOYOUNG ENTdooyoungent.com/upload/1b7641d8e649782f2111785377f9ba33.pdf · 889 %4 & ; É ² 3 ì I Ó & ; É v > h ¨ _1*-05 Û è ¢ I X Ö 3 Ù, I > Þ Þ t ¿
16번 종합 출력 833~896 2010.8.23 2:22 PM 페이지889 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
890
2 3
G
소형·경량/폭26.4mm
큰밸브용량- Cv1.2, Rc(PT)1/4
저소비전력/1.8W(DC)
N.C에서N.O으로간단히변경가능
표시기호
주문형식
Pilot 밸브Ass’y 주문형식
DS31 2 3 4 5 6 7 8
02C A10
TPC
절환방식0 : N.C/N.O공용
몸체형식1 : 직접배관형
정격전압1 : AC110V, 50/60Hz
2 : AC220V, 50/60Hz
3 : AC120V, 50/60Hz
4 : AC240V, 50/60Hz
5 : DC24V
6 : DC12V
7 : DC6V
8 : AC24V, 50/60Hz
9 : DC100V (※기타외사양은별도문의)
리드선취출방법G : 그로메트(리드선길이300mm)
DZ:DIN형터미널(커넥터부착, 램프 서지전압보호회로부착)
D :DIN형TERMINAL
N :DIN형(Connector 없음)
수동조작종류무기호 : Non-lock Push식
C : Lock식C형
관접속구경(SUP., CYL.)01 : Rc(PT)1/8
02 : Rc(PT)1/4
유로기호A : Normal Close
B : Normal Open
시리즈무기호 : 표준형
XC 16 : 동계불가형
리드선길이무기호 : 300mm(표준)
XWL01: 100mm
XWL02: 200mm
XWL04: 400mm
XWL20: 2000mm※표준길이이외사양은별도문의바랍니다.주1) PE Port 필요시별도문의
정격전압1 : AC110V, 50/60Hz
2 : AC220V, 50/60Hz
3 : AC120V, 50/60Hz
4 : AC240V, 50/60Hz
5 : DC24V
6 : DC12V
7 : DC6V
8 : AC24V, 50/60Hz
9 : DC100V
※기타외사양은별도문의
리드선취출방법및램프서지전압보호회로리드선취출방법
G : 그로메트( 리드선길이300mm)
DZ : DIN형터미널
(램프 서지전압보호회로)
D :DIN형TERMINAL
N :DIN형(Connector 없음)
수동조작종류무기호 : Non-lock Push식
C : Lock식C형
시리즈무기호: 표준형
XC16: 동계불가형
리드선길이무기호 : 300mm(표준)
XWL01: 100mm
XWL02: 200mm
XWL04: 400mm
XWL20: 2000mm※표준길이이외사양은별도문의바랍니다.
19
SC21 4
G 501
DS30 - -A(N.C)
싱
DS30 - -B(N.O)
A
R P R P
A
DS300시리즈
탄성체 Seal 3포트 Pilot형
⋯
⋯
XWL10
XWL5
16번 종합 출력 833~896 2010.8.23 2:22 PM 페이지890 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
891
www.TPCpage.co.kr
구조도/부품LIST 번호 품품 명 재품 질 비품 고
❶ 몸 체 알루미늄 다이케스팅 은색도장
❷ 아답터 플레이트 A 수품 지
❸ 피스톤 수품 지
❹ 피스톤 패킹 NBR
❺ 아답터 플레이트 가스켓 NBR
❻ 엔드커버 아연 다이케스팅 흑색도장
❼ 엔드커버 가스켓 NBR
❽ 스 플 알루미늄
❾ 스플 스프링 스프링강
❿ 스플 패킹 NBR
Quad Ring NBR
+자홈 남비작은나사 탄품소품강 M4×0.7×12ℓ와셔붙이
+자홈 접시작은나사 탄품소품강 M3×0.5×8ℓ
네임 플레이트 TETRON
Pilot밸브 Ass’y -
사양DIN TERMINAL BOX 주문형식
리드선취출방법 그로메트(G) DIN형터미널(DZ)
리드선의색 AC110V : 청색, AC220V : 적색, DC24V : 적 흑색
보호구조 방진 IP65
코일정격 AC(50/60Hz) 110V, 220V, 120V, 240V, 24V
전 압 DC 24V, 12V, 6V, 100V
허용전압변동 -15~+10%
코일절연의종류 B종상당(130℃)
온도상승치 40℃이하(정격전압인가시)
기동 5.6 VA(50Hz), 5VA(60Hz)피상전력 AC
여자 3.4 VA(50Hz), 2.3VA(60Hz)
소비전력 DC 1.8W/2.0W(램프부착)
램프, 서지전 AC LED, Varistor
압보호회로 DC LED, Varistor
추기호 정격전압
❶ AC110V
❷ AC220V
❸ AC120V
❹ AC240V
❺ DC24V
❻ DC12V
❼ DC6V
❽ 기타(AC24V)
❾ DC100V
❾ ❻❼❽ ❿ ❺❷❹❸
R P
사용유체 공기종기
작동방식 PILOT형
복귀방식 Air + Spring 형
위치수, port 수 2위치3port
관접속방법 직접배관형, 매니폴드배관형
관접속구경Rc(PT) 1/8 1/4
유효단면적mm2(Cv)19.2 22
(1.07) (1.2)
사용압력범위 0.15~0.9MPa(1.5~9kgf/cm2)
주위온도및사용유체온도 5~50℃
응답시간 30ms 이하(0.5MPa)
최대작동빈도 5c/s
Lamp(LED) 표준
급기종유 불필요
수동조작 Non-Lock Push식, Lock식C형
부착자세 자기종유
내충격/내진동 30G/5G(8.3~2000Hz)
TVF3130-61-2005
1
1 추기호
추기호
■제품별주의사항
사용하기전에반드시숙지하시고,안전상의 주의나, 공통 주의 사항을 참고하십시오.
DS300시리즈
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
16번 종합 출력 833~896 2010.8.23 2:22 PM 페이지891 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
892
직접배관형/2위치
그로메트 DS30 - G
DIN형 터미널 DS30 - DZ
21
35
21 2.5
35
31
27 35
36.8
59
68
32.5
35
46.5
31
27
32.5
(35)
(46.5)
300
리드
선길
이
53.5
12.5
23.5
53
14
16
19 3-Rc(PT)1/8, 1/4
104.5
2-ф3.2
2-ф3.4(부착구멍)
12.5
3.5
23.5
53
96.5
ф6~ф8
ф7
22.5
26.4
58
MAX.10
적용코드외경
5
14 19 3-Rc(PT)1/8, 1/4
95.5
16 2-ф3.2
22.5
26.4
2-ф3.4(부착구멍)
58
84
2.5
(SC2- GC-50)
“A”부 LOCK식 C형인 경우
(SC2- DZC-50)
“A”부 LOCK식 C형인 경우
“A”부
“A”부
DS300시리즈
16번 종합 출력 833~896 2010.8.23 2:22 PM 페이지892 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
893
www.TPCpage.co.kr
DS301시리즈
유로상태변경시에대해서(DS 300의경우) 전기결선
LEAD선취출방향의변경
유로상태를 변경(N·C N·O)할 때는 End Cover ①를
Body에서 분리시켜 End Cover 표면에 있는 ▲표시를 Body
N·O 마크로 옮긴다음(End Cover의 TPC 마크가 밑으로 감)
결합 시키십시오.
배관은 아래와 같이 하십시오.
유로상태 Post P A R
N·C 1차측 2차측 배기측
N·O 배기측 2차측 1차측
단자 NO. 1 2
DIN단자 + -
DIN 단자부착은 다음과 같이 되어 있으므로 각각 전원측에
결선해야 합니다.
나사 ①를 풀어서 DIN형 단자대 본체는 몸체에서 분리시킨
다음, 180。회전시켜 재조립하면 방향을 바꿀 수 있습니다.
DIN 단자대 부착
어스
21
①
DS300시리즈
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
16번 종합 출력 833~896 2010.8.23 2:22 PM 페이지893 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
894
TVF DS로모델명변경
성능및품질향상
RoHs대응
동작상태식별Lamp 점등
무극성기본Type
White & Black명암으로Design Image UP
Coil 180。회전조립
Pilot 밸브Ass’y 주문형식
코일정격전압
1 : AC 110V, 50 / 60Hz
2 : AC 220V, 50 / 60Hz
3 : AC 120V, 50 / 60Hz
4 : AC 240V, 50 / 60Hz
5 : DC 24V
6 : DC 12V
7 : DC 6V
8 : AC 24V, 50 / 60Hz
9 : DC 100V
※ 기타외 사양은 별도 문의
리드선 취출방법 및 램프·서지전압보호회로G : 그로메트(리드선 길이 300mm)
DZ : DIN형 터미널(커넥터 부착,
램프·서지전압보호회로 부착
DD : DIN형 TERMINAL
수동조작 종류무기호 : Non Lock Push
C : Lock식 C형
시리즈무기호 : 표준형
XC16 : 동계 불가형
리드선 길이무기호 : 300mm(표준형)
XWL01 : 100mm
XWL01 : 200mm
XWL01 : 400mm
XWL01 : 2000mm
더블
DS3230
Closed Center
DS3330
Exhaust Center
DS3430
표시기호싱
DS3130
DS3000시리즈
탄성체 Seal 5포트 Pilot형
⋯
3 4
SC2 XWL1 2 5
1 G 50
주문형식
절환방식1 : Single
2 : Double
3 : Closed Center
4 : Exhust Center
배관형식0 : 베이스 배관
3 : 직접 배관
Pilot 배기 형식0 : 표준형
3 : 집합배기형
정격전압1 : AC 110V 50 / 60Hz
2 : AC 220V 50 / 60Hz
3 : AC 120V 50 / 60Hz
4 : AC 240V 50 / 60Hz
5 : DC 24V
6 : DC 12V
7 : DC 6V (DZ타입 불가)
8 : AC 24V 50 / 60Hz
9 : DC 100V (DZ타입 불가)
리드선 취출방법 및 램프·서지전압 보호회로G : 그로메트(리드선 길이 300mm)
DZ : DIN형 터미널(커넥터 부착,
램프·서지전압보호회로 부착
DD : DIN형 TERMINAL (DC6, 100V
불가)
수동조작무기호 : Non Lock Push
C : Lock식 C형
관접속구경(sup cyl’)01 : Rc(PT)1/8
02 : Rc(PT)1/4
관접속구경(sup cyl’)무기호 : 표준형
XC16 : 동계 불가형
리드선 길이무기호 : 300mm(표준형)
XWL 01 : 100mm
XWL 02 : 2000mm주1) PE Port 필요시별도문의
DS XWL2 31 7 8 94 5 6
1 G C3 1 3 0 02
16번 종합 출력 833~896 2010.8.23 2:22 PM 페이지894 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
895
www.TPCpage.co.kr
사양
선택사양
형식
매니폴드용형식
품품명명 품품명번 적품명용
소 음 기 SN110-01 Rc(PT)1/8
(1)관접속구경 유효단면적mm2(Cv값) 중량배관방식 형식 절환방식
(SUP,CYL.) Rc(PT)1/8 Rc(PT)1/4 (kgf)
DS3130- - 2위치싱 14.4(0.8) 18(1.0) 0.21
DS3230- - 2위치더블Rc(PT)1/8
14.4(0.8) 18(1.0) 0.29직접배관형
DS3330- - 3위치Closed Center·
11.7(0.65) 14.4(0.8) 0.44
DS3430- - 3위치Exhaust CenterRc(PT)1/4
14.4(0.8) 18(1.0) 0.44
(1) 배기포트(R1, R2)는 Rc(PT)1/8입니다.(2) 배가 유효단면적은 공급 유효단면적과는 다소 차이가 있습니다. 또한, DS3230과 3430의 배기특성으로
인한 속도 차이가 날수도 있습니다.
매니폴드 형식형형식식
형형식식 EXH방식 A,B(CYL)포트 배관
DS3 30- - B마운트 30형 공형식통 밸형식브
0102
0102
0102
0102
0102
DIN TERMINAL BOX주문형식
추기호 정격전압
❶ AC100V
❷ AC200V
❸ AC120V
❹ AC240V
❺ DC24V
❻ DC12V
❼ DC6V
❽ 기타(AC24V)
❾ DC100V
TVF3130-61-2005
1
1 추기호
추기호
■제품별주의사항
사용하기전에반드시숙지하시고,안전상의 주의나, 공통 주의 사항을 참고하십시오.
항목 사양
2위치 싱 . 3위치 0.15 ~ 0.9 MPa [1.5~9kgf/㎠]
2위치 더블 0.1 ~ 0.9MPa [1~9kgf/㎠]
사용온도범위 5~50℃
2위치 싱 . 더블 30ms 이하 (0.5MPa)
3위치 40ms 이하 (0.5MPa)
2위치 싱 . 더블 5 c/s
3위치 3 c/s
Lamp(LED) 표 준
급 유 불필요
수동조작 NON-LOCK PUSH, LOCK식 C형
부착자세 자 유
내충격/내진동 30G/5G(8.3~2000Hz)
Pilot 밸브 배기 방식 개별배기형, 주밸브, Pilot 밸브 집합 배기형
리드선 취출방법 Grommet. Din connector
보호구조 방 진 IP 65
AC 50/60 Hz 110V, 220V, 120V, 240V, 24V
DC 24V, 12V, 6V, 100V
기동 5.6VA(50Hz), 5.0VA(60Hz)
여자 3.4VA(50Hz), 2.3VA(60Hz)
소비전력(DC) 2W(Lamp 부착)
허용전압변동 -15% ~ +10%
사용압력범위
응답시간
최대작동빈도
코일정격전압
피상전력(AC)
DS3000시리즈
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
16번 종합 출력 833~896 2010.8.23 2:22 PM 페이지895 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
896
구조도/부품LIST
주요부품 예비부품
번호 부 품 명 재 질 비 고
❶ 몸 체 알루미늄다이캐스팅 은색도장
❷ 아답터 플레이트 (주3)수 지
❸ 엔드커버 알루미늄다이캐스팅 흑색도장
❹ Pilot 몸체 수 지
❺ Pilot 커버 수 지
❻ 피스톤 (주1)수 지
❼ 스 플 알루미늄
(주1) 3위치형은 알루미늄입니다.(주3) 3위치형은 알루미늄 다이캐스팅입니다.
번 호 부 품 명 재 질 비 고
❽ (주2)Pilot 밸브 Ass’y - -
(주2) 주문시에는 별도 상담하여 주십시오.
Single Solenoid Double Solenoid
3위치 Closed Center
3위치 Exhaust Center
❸ ❼ ❶ ❻ ❷ ❹ ❽ ❺ ❼
❼
❼ ❶ ❻ ❷ ❹ ❽ ❺
❶ ❻ ❷ ❹ ❽ ❺
❶ ❻ ❷ ❹ ❽ ❺
CYL.1(B)
(R2)EXH.1
(R2)EXH.1(P)
SUP
(P)SUP(R1)
EXH.2
(R1)EXH.2P.E
P.E P.E
(R2)EXH.1
(P)SUP
(R1)EXH.2
P.E P.E
CYL.2(A)
CYL.1(B)
CYL.2(A)
CYL.1(B)
CYL.2(A)
(R2)EXH.1
(P)SUP
(R1)EXH.2
P.E P.E
CYL.1(B)
CYL.2(A)
DS3000시리즈
16번 종합 출력 833~896 2010.8.25 11:24 AM 페이지896 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
897
www.TPCpage.co.kr
직접배관형/2위치Single Solenoid
그로메트/DS313 - G
그로메트/DS3 3 - G
DIN형터미널/DS3 3 - D
직접배관형/2위치Double Solenoid·3위치Closed Center·Exhaust Center
135(3위치:155.5)
83(3위치:103.5)
73(3위치:93.5)
176(3위치:197)
73(3위치:93.5)
83(3위치:103.5)
10
23
20.5
18 18
35
46.5
158.5(3위치:179)
62(3위치:73)
MAX.10MAX.10
2-Rc(PT)1/8
(R1, R2포트)
22.5
26.4
약300
(리드선
길이)
32.5
2-ф4.2(부착구멍)
ф6~ф8
(A,B,P포트)
2-ф4.3
20.5
1023
31.5 35
7
5968
(매니폴드부착구멍)2-ф4.2(부착구멍)
3-Rc(PT)1/4, 1/8
3-Rc(PT)1/4, 1/8
(P, A, B 포트)2-ф4.3
MANIFOLD b
DIN형터미널/DS313 - D
98
72
10
23
6730.5
20.5
109.5
23
20.5
110.5
2-ф4.2(부착구멍)
10
22.5
26.4
118.572
6730.5
20
31.535
36.8
59
68
MAX.10
61.5
2-Rc(PT)1/8
(R1, R2포트)
18 18
2-ф4.2(부착구멍)
35
31.5 46.5
(리드선
길이)
약300
32.5
3-Rc(PT)1/4, 1/8
3-Rc(PT)1/4, 1/8(A,B,P포트)2-ф4.3
ф6~ф8
(P, A, B 포트)2-ф4.3
(매니폴드부착구멍)
20 1
78
DS3000시리즈
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지897 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
898
매니폴드
B 마운트형/TVV5F3 - 30
형식·사양
매니폴드 형식 B마운트(단일 베이스형식)
EXHAUST 포트 형식 공 통 개 별(1)최대 밸브 연수 20연
(1) B마운트형은 8연 이상의 경우에는 P(SUP)포트의 양측에서 가압, 양측의 R(EXH) 포트에 의해 배기해주십시오.
형식·사양
매니폴드 베이스 주문형식
L:치수표
형식매니폴드 (1)R(EXH) 적용밸브
베이스형식 형식 P(SUP) R(EXH) A,B(CYL) P(SUP) R(EXH) A,B(CYL) 형식
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지898 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
899
www.TPCpage.co.kr
사양
사용유체 공 기
사용압력범위 2 위치Single 0.15~0.9(1.5~9kgf/cm2)
단위:MPa(Kgf/㎠)Double 0.1~0.9(1~9kgf/cm2)
3 위치 0.15~0.9(1.5~9kgf/cm2)
주위온도및사용유체온도(℃) 5~50
허용전압변동범위(%) -15~+10
최대작동빈도(회/초)2 위치 5c/s
3 위치 3c/s
최소작동빈도 1회/30일 (KS B6356에의함)
Lamp(LED) 표준
급유 필요없음(급유시터어빈유1종 ISO VG32)
내충격/내진동(G) 30/5(8.3~200㎐)
보호구조 방진
부착자세 자유
수동조작 Non-Lock Push Type, Lock type “L”형
Lead선취출방법 Grommet, Din형 Terminal
기동50㎐ 5.6
피상전력(VA) AC60㎐ 5.0
여자50㎐ 3.4
60㎐ 2.3
소비전력(W)Lamp없음 1.8
DCLamp부착 2.0
응답시간(ms)2위치 30이하(0.5 MPa의공기압기준. KS B6356에준함)
3위치 40이하(0.5 MPa의공기압기준. KS B6356에준함)
유효단면적 2위치 16(0.9)
단위:㎟(Cv치)3위치
Closed Center 12.5(0.7)
(Valve 자체의유효단면적) Exhausted Center 16(0.9)
콤팩트/ 경량
큰밸브용량/ Cv 0.9, 16㎟
저소비전력/ 2W(DC)(Lamp 부착)
부착타입다양화
싱
DS3100더블
DS3200
Closed Center
DS3300
Exhaust Center
DS3400
■제품별주의사항
사용하기전에반드시숙지하시고, 사용상의 주의나, 공통 주의사항을 참고하십시오.
DS3000시리즈
5포트 파일럿형 솔레노이드 밸브/서브 베이스 배관형
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지899 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
900
주문형식
DS1 2 3 4 5
3 0 5 G L1
절환방식
1 Single
2 Double
3 Closed Center
4 Exhaust Center
몸체사양
0 표준형
정격전압
1 AC110V(50/60㎐)
2 AC220V(50/60㎐)
3 AC120V(50/60㎐)
4 AC240V(50/60㎐)
5 DC24V
6 DC12V
7 DC6V
8 AC24V(50/60㎐)
9 DC100V
리드선 취출방식
G 그로메트형
(리드선 길이 : 300㎜)
DZ DIN형 커넥터 부착
(램프, 서지전압 보호회로 부착)
N Din 커넥터 부착형
(커넥터 없음)
수동조작
무기호 Non-Lock Push식
L Lock식“L”형
관 접속구경
무기호 밸브 본체만(서브플레이트 제외)
8A Rc(PT)1/4(서브플레이트 부착)
원터치 피팅부착
무기호 없음
06 Ø6 원터치 피팅부착
08 Ø8 원터치 피팅부착
시리즈
무기호 표준형
XC16 동계 불가형
리드선길이
무기호 : 300mm(표준)
XWL01: 100mm
XWL02: 200mm
XWL04: 400mm
XWL20: 2000mm※표준길이이외사양은별도문의바랍니다.
6 7 8
8A 06 XC160
DS 3 0 5 G L1 0
21
02 063 00DSM
원터치피팅부착
무기호 없음
06 Ø6 원터치 피팅부착
08 Ø8 원터치 피팅부착
연수
1 1연 6 6연
2 2연 7 7연
3 3연 8 8연
4 4연 9 9연
5 5연 10 10연
(11연 이상은 별도문의)
밸 브(가스켓, 부착용 볼트 포함)
밸브+서브베이스
매 니 폴 드
3 00 (가스켓부착용볼트포함)DSB블랭킹플레이트
XWL9
XWL
⋯
DS3000시리즈
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지900 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
901
www.TPCpage.co.kr
외형치수도/2위치Single Solenoid (mm)
외형치수도/ 2위치Double Solenoid·3위치Closed Center·Exhaust Center (mm)
그로메트/DS3100- G
그로메트/DS3200, 3300, 3400- G
DIN형터미널/DS3100- DZ
DIN형터미널/DS3200, 3300, 3400- DZ
※( ):3Position
DS3000시리즈
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지901 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
902
치수도/매니폴드블럭 (mm)
치수도/매니폴드ASS’Y (mm)
연수(n) 1 2 3 4 5 6 7 8 9 10
L1 45 74 103 132 161 190 219 248 277 306
L2 35 64 93 122 151 180 229 238 267 296
연수(n) 1 2 3 4 5 6 7 8 9 10
L1 45 74 103 132 161 190 219 248 277 306
L2 35 64 93 122 151 180 229 238 267 296
■각연수(n)별치수표
DS3000시리즈
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지902 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
903
www.TPCpage.co.kr
소형·경량/폭32mm
큰밸브용량- Cv2.8, Rc(PT)3/8
Cv3.2, Rc(PT)1/2
저소비전력/1.8W(DC)
표시기호
주문형식
절환방식1 : Single
2 : Double
3 : Closed Center
4 : Exhust Center
5 : Pressure Center
몸체형식20 : 직접 배관형
23 : 집합 배기형
코일정격전압
1 : AC 110V, 50 / 60Hz
2 : AC 220V, 50 / 60Hz
3 : AC 120V, 50 / 60Hz
4 : AC 240V, 50 / 60Hz
5 : DC 24V
6 : DC 12V
7 : DC 6V
8 : (AC 24V), 50 / 60Hz
9 : DC 100V
※ 기타외 사양은 별도문의
리드선 취출G : 그로메트(리드선 길이 300mm)
DZ : DIN형 터미널(커넥터 부착,
램프·서지전압보호회로 부착
DD : DIN형 TERMINAL
NN : DIN형 (Connector 없음)
수동조작 종류무기호 : Non Lock Push
C : Lock식 C형
관접속구경02 : Rc(PT)1/4
03 : Rc(PT)3/8
04 : Rc(PT)1/2
시리즈무기호 : 표준형
XC16 : 동계 불가형
리드선 길이무기호 : 300mm(표준형)
XWL01 : 100mm
XWL01 : 200mm
XWL01 : 400mm
XWL01 : 2000mm
싱DS5120
더블DS5220
BA
R2PR1
BA
R2PR1
DZ : DIN형 터미널(커넥터부착,
`` 램`프·서지전압보호회로부착)
D : DIN형 TERMINAL
수동조작종류무기호 : Non - Iock Push식
C : LOCK식C형
D : DIN형 TERMINAL
시리즈무기호 : 표준형
XC16 : 동계불가형
리드선길이무기호 : 300mm(표준)
XWL01: 100mm
XWL02: 200mm
XWL04: 400mm
XWL20: 2000mm※표준길이이외사양은별도문의
바랍니다.
SC2 501 2 3 4
G1
Pilot 밸브 Ass’y 주문형식(:코일품번)
DS5000시리즈
탄성체 Seal 5포트 Pilot형
⋯
코일정격전압1 : AC110V, 50/60Hz
2 : AC220V, 50/60Hz
3 : AC120V, 50/60Hz
4 : AC240V, 50/60Hz
5 : DC24V
6 : DC12V
7 : DC6V
8 : 기타(AC24V 외사양은별도문의)
9 : DC100V
리드선취출방법및램프·```` 서지전압보호회로
G : 그로메트
` (리드선길이300mm)
XWL5
⋯
Closed CenterDS5320
Exhaust CenterDS5420
Pressure CenterDS5520
BA
R2PR1
BA AB
R2PR1 R2PR1
※ 표준길이 이외 사양은 별도문의 바랍니다.
DS XWL21 6 7 83 4 5
1 G C5 1 2 0 02
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지903 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
DS5520- - 3위치Pressure Center 40(2.2) 45(2.5) 0.59 0.58
(1) 직접 배관형의 밸브는 각각의 매니폴드 베이스로 부착이 가능합니다.(매니폴드 형식/B마운드·공통Exhaust)
(2) 그로메트 Type 경우의 중량입니다.(3) 밸브 유효단면적은 공급측의 유효단면적으로 배기측 유효단면적과는 다소의 차이가 있습니다.
020304
020304
020304
020304
020304
유효단면적mm2(Cv값) (2)중량(kg)
DIN TERMINAL BOX주문형식
추기호 정격전압
❶ AC110V
❷ AC220V
❸ AC120V
❹ AC240V
❺ DC24V
❻ DC12V
❼ DC6V
❽ 기타(AC24V)
❾ DC100V
TVF3130-61-2005
1
1 추기호
추기호
Rc(PT)1/4
직접배관형
DS5000시리즈
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지904 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
905
www.TPCpage.co.kr
주요부품 예비부품
번호 재 질 비 고
❶ 몸 체 알루미늄다이캐스팅 은색도장
❷ 아답터 플레이트 알루미늄다이캐스팅 흑색도장
❸ 엔드커버 알루미늄다이캐스팅 흑색도장
❹ Pilot 몸체 수지
❺ Pilot 커버 수지
❻ 피스톤 (주1)수지
❼ 스 플 알루미늄
(주1) 3위치형은 알루미늄입니다.
번호 재 질 비 고
❽ (주2)Pilot 밸브 Ass’y - -
(주2) 주문시에는 별도 상담하여 주십시오.
Single Solenoid
3위치 Closed Center
3위치 Exhaust Center
Double Solenoid
❼ ❶
B
R2 P R1 R2 P R1
A B A
❻ ❷ ❹ ❽ ❺ ❼ ❶ ❻ ❷ ❹ ❽ ❺
R2 P R1
B A
❼ ❶ ❻ ❹ ❽ ❺❷
R2 P R1
B A
❼ ❶ ❻ ❹ ❽ ❺❷
부 품 명 부 품 명
❸
DS5000시리즈
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
17번 종합 출력 897~960 2010.8.25 11:25 AM 페이지905 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
906
직접배관형/2위치Double Solenoid·3위치Closed Center·Exhaust Center
직접배관형/2위치Single Solenoid
그로메트DS512 - G DIN형터미널/DS512 - DZ
그로메트DS5 2 - G DIN형터미널/DS5 2 - DZ
169(3위치:198)
107(3위치:136)192(3위치:221)
117(3위치:146)
3-Rc(PT)1/2, 3/8, 1/4
(A,B,P포트)
2-Ø4.3 28
28
26 26 2-Rc(PT)3/8, 1/4
22.5
194(3위치:223)107(3위치:136)
3228
51
4.5
42
24
67 76
2744
210(3위치:239)
117(3위치:146)MAX.10
2-Ø4.3
(매니폴드부착구멍)
3-Ø4.3
3-Rc(PT)1/2, 3/8, 1/4
(A, B, P포트)
Ø6~Ø8
적용코드외경
(부착구멍)
MAX.10
2-Ø4.3
2-Ø4.3
101.548 3-Ø4.3
132.5106.5
28
26 26
144
44
51
46
(매니폴드 부착구멍)
(매니폴드 부착구멍)
부착구멍
3-Ø4.3
153106.5101.5
48
28
145
4.5
24
67 76
443-Rc(PT)1/2, 3/8, 1/4
(A, B, P포트)
3-Rc(PT)1/2, 3/8, 1/4(A, B, P포트)
Ø6~Ø8
적용코드외경
(부착구멍)
40.5
약300
리드선길이
22.5
3240.5
46 42 51
32
55
3
약300
리드선길이
(R1, R2포트)
2-Rc(PT)3/8, 1/4(R1, R2포트)
4.5
42
24
44
3-Ø4.3
부착구멍
(매니폴드 부착구멍)
2824
42
4.5
28
DS5000시리즈
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지906 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
907
www.TPCpage.co.kr
매니폴드
형식·사양
매니폴드 형식 B마운트(단일 베이스 형식)
EXHAUST 포트 형식 공통 Exhaust
최대 밸브 연수 10연
(1) 5연 이상의 경우에는 양측의 P(SUP)포트에 가압, 양측의 R(EXH)포트로 배기해 주십시오.
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지907 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
908
램프, 서지전압보호회로
3포트밸브로사용하는경우(5포트의사용시)
사용유체의질에대하여
정격전압 AC, DC
(주1) 그로메트(G) Type에는 램프 부착형이 없음(주2) ZNR은 바리스타(Varistor)라고 하며 서지전압 보호 소자임.
① 필터의 여과 정도는 5㎛정도로 충분합니다.
② 다량의 드레인은 밸브를 처음 사용하고 있는 공압기기의 작동
불량을 초래하기 쉽고, 또한 환경을 오염시키기 때문에 관리에
충분히 유의하여 주십시오. 또 드레인 배출 등의 관리가
어려운 경우에는 자동배출기 부착 필터의 사용을 권장합니다.
③ 콤프레샤에서 발생하는 카본 가루가 특히 많은 경우에는
밸브 내부에 다량으로 부착되어 작동 불량의 원인이 되는
경우가있으므로이때에는카본가루의발생이적은콤프레샤를
사용하던가 콜레싱필터에 의해 제거하여 주시기 바랍니다.
실린더 포트(A, B)의 한쪽 방향을 플러그로 막음으로써
Normal Closed(N.C) 또는 Normal Open(N.O)의 3포트 밸브로
사용됩니다.
매니폴드 등으로 3포트 밸브가 필요한 경우 등에 편리합니다.
단, Non Leak밸브 등의 특수한 용도로는 사용하지 마십시오.
또한 배기포트는 개방 상태로 사용하여 주십시오.
플러그 B포트 A포트
위치 (CYL.1포트) (CYL.2포트)
절환
방식
접속나사적정 조임 토크
조임부의 재질kgf·cm(N·m)
M33.1~3.9(0.31~0.39) 수 지
4.7~5.9(0.47~0.59) 알루미늄
M47.5~9.5(0.75~0.95) 수 지
11.5~14.5(1.15~1.45) 알루미늄
M5 15~20(1.5~2) 수 지
PT 1/8 70~90(7~9)알루미늄
PT 1/4 120~140(12~14)
솔레노이드
수
싱
더
블
N.C N.O
(X)플러그 (X)플러그
(X)플러그 (X)플러그
배관에대하여
① 배관전에 Air Blow(플러싱)또는 세척을 충분히 행하여 관내의
칩, 절삭유, 먼지 등을 제거하여 주십시오.
② 배관 및 피팅류를 체결할 경우에는 배관나사의 칩이나 Seal재의
혼입이 없도록 주의하여 주십시오. 또한 Seal Tape를 사용할
때에는 나사부를 1.5~2산 정도 남기고 감아 주십시오.
③ 매니폴드 밸브에는 PE포트에 소음기가 부착되지 않는 경우가
있으므로 확인하여 주십시오.
④ 배관시의 체결토크
24V 이하
200V 이하
DZ
EZ, TZ, DZ
Neon Iamp
Varistor
BA
BA
BA
BA
R2PR1
R2PR1 R2PR1
R2PR1
■제품별주의사항
사용하기전에반드시숙지하시고,안전상의주의를위해공통주의사항을참고하십시오.
취급상의주의사항
DS5000시리즈
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지908 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
909
www.TPCpage.co.kr
누설전압에대하여 장기통전의경우
유량구하는방법
사용환경에대하여
급유에대하여
① 통전 OFF시에 누설전류 등에 의해 코일의 양끝에 잔류하는
누설전압의 크기는 AC 코일은 정격전압의 20% 이하, DC
코일은 정격전압의 3% 이하로 억제하여 주십시오.(AC 코일의
경우에 철심을 수동으로 누른 상태에서 측정하여 주십시오.)
② 접점보호에 C-R 소자를 사용하는 경우, C-R 소자를 통하여
흐르는 누설전류에 의해 누설전압이 증가하는 경우도 있으므로
주의하여 주십시오.
※ 특히 무접점 릴레이에서는 보호회로가 내장되어 있는 것이 있으므로 주의``하여 주십시오.
① 부식성가스, 화학약품 용액, 해수의 비말(飛沫), 빗물, 수증기의
향이 있는 장소 근처의 부착은 피하여 주십시오.
② 물방울, 기름 및 용접시의 스패터 등이 일시적으로 향이
있는 장소에 부착할 때에는 보호커버 등의 대책을 세워 주십
시오.
③ Dust등이 많은 경우에는 밸브의 배기포트에소음기 등을
부착하여 Dust등의 밸브 유입을 방지하여 주십시오.
저온에서사용하는것에대하여
-10℃까지 사용 가능하지만, 드레인, 수분 등의 동결에 충분히
주의하여 주십시오. 또 이와같은 경우, 드레인, 수분의 제거에
드라이어의 설치를 권장합니다.
순시통전시간에대하여
포트표시기호표
순시 통전될 경우, 통전시간은 0.1초 이상, 비통전(OFF)시간은
0.05초 이상으로 사용하십시오.
장기간 연속적으로 통전하여 사용하는 경우에는 별도 사양의
상담을 하여 주십시오.
① P2+1.033 P1+1.033 1.89(P2+1.033)의 경우
① 1.89(P2+1.033)<P1+1.033의 경우
Q : 기존상태의 유량(Nℓ/min)
P1 : 1차측 압력(게이지압) (kgf/cm2)
P2 : 2차측 압력 (게이지압) (kgf/cm2)
△P : 압력차(P1-P2) (kgf/cm2)
S : 유효단면적(mm2)
G : 비중(공기=1)
θ : 사용 공기 온도(℃)
Q=22.2SG
P(P2+1.033)273+θ
273·
Q=11.1S(P1+1.033)G
1
273+θ
273·
초기 윤활되고 있으므로 무급유로 사용 가능합니다.
② 급유하는 경우에는 터빈유 1종(ISO VG32)를 사용하여 주십
시오. 또한급유를도중에중지하는경우, 초기윤활제의소실로
작동불량을 초래하는 경우가 있으므로 급유는 반드시 계속
하여 주십시오.
터빈유 1종(ISO VG32)에 대하여서는 별도 문의 바랍니다.
구 분 DS300 DS3000, DS5000
입 구 P(SUP)
출 구 A(CYL) A(CYL.2) 및 B(CYL.1)
배출구 R(EXH) R1(EXH2) 및 R2(EXH1)
S:P(SUP)
KS기호
(싱
솔레노이드)
밸브
누설전압
※접
점부
C-R 소
자
누설전류
전원
A
R P R2 P R1
BA
DS5000시리즈
SAH
CR/CVARD
CR/CVAQ2
CR/CVTCM2
CR/CVNGQL
CR/CV/SCNLCD
TM1
TS1
TM2
TS2
TQ1
TE1
TT1
TR1
TV2
RS1000RS3000RS4000
DR100DR200
SI UNIT
DV1000DV3000DV4000
DS300DS3000DS5000
DS2000DS6000
DX1DX2
CR/CVTGQL
NBU
ACUSE
ARM
17번 종합 출력 897~960 2010.8.21 11:46 AM 페이지909 TG 2540DPI 175LPI
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Multicolor Image: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Multicolor Graphic: Profile: HD-2-01-Hexa340K95GCR90V4.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no