Stenhøj Major 430W (BMW approved)

4-post electro-hydraulic lifts

Stenhøj Major 430W

(BMW approved)pp )

The STENHØJ Major 430W lifts are especially suitable for wheel alignment service alignment, service and inspection, repair of brakes, wheels, exhaust system, shock absorbers, transmission and differential differential.

This wheel alignment lift fulfils the special BMW requirements with regard to maximum permissible difference in platform height during wheel alignment (+/-0.5 mm right/left and +/- 1 mm front/back/dia-gonally). The lift also fulfils the demands regarding stiffness, dimensions and the min./max. lifting h i ht

The platforms are equipped with fixed as well as movable

height.

Major 430W is delivered as standard with 900 mm with fixed as well as movable

cover plates for turntables (not inclusive in the delivery).lifting the level

standard with 900 mm ramps. As optional extras we offer 1600 mm ramps.

39A Lillee Crescent, Tullamarine, Victoria 3043T: (03) 9338 4633 F: (03) 9338 7098E: info@melbournejackrepairs.com.auW: www.melbournejackrepairs.com.au

Stenhøj Major 5230

Stenhøj Major 430W(BMW approved)

CORROSION-PROOF SURFACE TREATMENTStenhøj lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plantpp ) bake plant.

Technical data

Lifting capacity 4000 kg

Lifting height 1820 mm

Min. height 190 mm

Lifting/lowering time 28 sec.

Motor 3 kW

Min./max. pressure 5/10 bar

The STENHØJ Major 430W is equipped with mechanical safety catch bar and has catch bar, and has automatic ”soft lowering” for the last 150 mm above the floor. The lift also has acoustic warning signal when loweringwhen lowering.

lifting the level

Standard coloursDark grey RAL 7016White RAL 9002

No liability accepted for specifications, which are subject to alteration.