4
Features 2 Models: 4X1200 and 4X2000 Touring/event/mobile version: e-version Version for fixed installations: i-version Output power: 4x1200/2000 watts @ 2 ohms in only 2 RU each Absolutely reliable steady-state performance Excellent sound and superior impulse response Impedance measurement Selectable Clip Limiter (hard/soft) 4-channel Dante™ inputs (optional) SXL II Data Port (RS485) for monitoring and control of up to 16 channels via Bittner SXL II Control Interface High tech SMT design Two separate stereo amplifiers Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay XLR inputs and SPEAKON outputs (e-version) High-End switched power supply with PFC LED indicators for SIGNAL, CLIP, PROTECT, POWER Temperature controlled, variable speed low noise fans Digital wear-free Volume Controls (can be operated manually) Selectable Stereo/Bridged Mode Softstart Sequential Remote Power On 2 Alive Contacts 3 Years Warranty Connectors and Controls Audio Inputs: analog: XLR / mono jack connectirs (Neutrik Combo) digital: RJ-45 (Dante™; optional) Loudspeaker Outputs: SPEAKON Volume Controls: 4 digital potentiometers with 16 steps each: -90, -78, -66, -54, -42, -30, -24, -18, -15, -12, -9, -6, -3, -2, -1, 0 dB Remote Power On: Contacts 7-10 of a 10-pin PHOENIX connector. On: +12V, Off: -12V. Delay of incoming voltage for sequential amps in a daisy-chain. Alive Contacts: Contact 1-6 of a 10-pin PHOENIX connector. 1 contact for 2 channels each (1+2, 3+4). DIP Switch with 8 Switches: Switch 1/2: Address for SXL-connection. Switch 3: Dante™ On/Off Switch 4/5: Limiter On/Off, Hard/Soft Switch 6: BRIDGE On/Off for channel 1/2 Switch 7: BRIDGE On/Off for channel 3/4 Switch 8: n.c. SXL Dataport: RS-485, 2 RJ-45 jacks (8-pin) paralleled, 1 LED TX / RX Power: Power switch, fuse and powerCON connector Bittner 4Xe. Groundbreaking technology for event and mobile applications. Much more than just power! 4x superior sound and solid durability, combined with amazing and leading technology. Audio networking via Dante™. Control via Ethernet (with SXL II) – worldwide diagnostics and maintenance via the Internet. All Specifications Subject to Change without Notice. Errors and omissions excepted. All Specs under www.bittner-audio.com DECLARATION OF CONFORMITY We declare that this product is in accordance with EMC regulation 89/336/EEC and meets the requirements of the product norm EN-55013 (emission), and EN-55020 (immission).

4 Separate Channels - Bittner Audio... State-of-the-Art Speaker Management and Dante Networking Top 1 R Top 6 R Top 2 R Top 7 R Top 3 R Top 8 R Top 4 R Sub 1 R Sub 5 R Sub 3 …

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 4 Separate Channels - Bittner Audio... State-of-the-Art Speaker Management and Dante Networking Top 1 R Top 6 R Top 2 R Top 7 R Top 3 R Top 8 R Top 4 R Sub 1 R Sub 5 R Sub 3 …

Features• 2 Models: 4X1200 and 4X2000 • Touring/event/mobile version: e-version Version for fixed installations: i-version• Output power: 4x1200/2000 watts @ 2 ohms in only 2 RU each• Absolutely reliable steady-state performance • Excellent sound and superior impulse response• Impedance measurement• Selectable Clip Limiter (hard/soft)• 4-channel Dante™ inputs (optional)• SXL II Data Port (RS485) for monitoring and control of up to 16 channels via Bittner SXL II Control Interface• High tech SMT design • Two separate stereo amplifiers• Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay• XLR inputs and SPEAKON outputs (e-version)• High-End switched power supply with PFC• LED indicators for SIGNAL, CLIP, PROTECT, POWER• Temperature controlled, variable speed low noise fans• Digital wear-free Volume Controls (can be operated manually)• Selectable Stereo/Bridged Mode• Softstart• Sequential Remote Power On• 2 Alive Contacts • 3 Years Warranty

Connectors and ControlsAudio Inputs:• analog: XLR / mono jack connectirs (Neutrik Combo)• digital: RJ-45 (Dante™; optional)

Loudspeaker Outputs:• SPEAKON

Volume Controls:• 4 digital potentiometers with 16 steps each: -90, -78, -66, -54, -42, -30, -24, -18, -15, -12, -9, -6, -3, -2, -1, 0 dB

Remote Power On:• Contacts 7-10 of a 10-pin PHOENIX connector. On: +12V, Off: -12V. Delay of incoming voltage for sequential amps in a daisy-chain.

Alive Contacts:• Contact 1-6 of a 10-pin PHOENIX connector. 1 contact for 2 channels each (1+2, 3+4).

DIP Switch with 8 Switches:• Switch 1/2: Address for SXL-connection. • Switch 3: Dante™ On/Off• Switch 4/5: Limiter On/Off, Hard/Soft • Switch 6: BRIDGE On/Off for channel 1/2 • Switch 7: BRIDGE On/Off for channel 3/4• Switch 8: n.c.

SXL Dataport:• RS-485, 2 RJ-45 jacks (8-pin) paralleled, 1 LED TX / RX

Power:• Power switch, fuse and powerCON connector

Bittner 4Xe.Groundbreaking technology forevent and mobile applications.Much more than just power!4x superior sound and soliddurability, combined with amazingand leading technology.

Audio networking via Dante™.Control via Ethernet (with SXL II) –worldwide diagnostics andmaintenance via the Internet.

All Specifications Subject to Change without Notice.Errors and omissions excepted.All Specs under www.bittner-audio.comDECLARATION OF CONFORMITYWe declare that this product is in accordance withEMC regulation 89/336/EEC and meets the requirements of theproduct norm EN-55013 (emission), and EN-55020 (immission).

Page 2: 4 Separate Channels - Bittner Audio... State-of-the-Art Speaker Management and Dante Networking Top 1 R Top 6 R Top 2 R Top 7 R Top 3 R Top 8 R Top 4 R Sub 1 R Sub 5 R Sub 3 …

4 Separate Channels and 4 Floor Monitors

4 Separate Channels and 8 Floor Monitors

FloorMonitor 1

FloorMonitor 2Floor Monitor 1

FloorMonitor 3

FloorMonitor 6Floor Monitor 5

FloorMonitor 2

FloorMonitor 4Floor Monitor 3

FloorMonitor 4

FloorMonitor 8Floor Monitor 7

Example: Right Section

Example: Right Section

Input Analog 1

Input Analog 2

Input Analog 3

Input Analog 4

Input Analog 1

Input Analog 2

Input Analog 3

Input Analog 4

Analog Audio

Output 3

Output 3

Output 4

Output 4

Output 2

Output 2

Output 1

Output 1

Bittner4X1200ewith Dante™

Bittner4X2000ewith Dante™

Input

Input

www.bittner-audio.com

Page 3: 4 Separate Channels - Bittner Audio... State-of-the-Art Speaker Management and Dante Networking Top 1 R Top 6 R Top 2 R Top 7 R Top 3 R Top 8 R Top 4 R Sub 1 R Sub 5 R Sub 3 …

Application Example PA: 2 Tops und 2 Subs

Application Example PA: 4 Tops und 4 Subs

Top 1 R

Top 2 R

Top 3 R

Top 4 R

Top 1 R Far

Sub 1 R

Sub 2 R

Top 2 R Near

Sub 1 R

Sub 3 R

Sub 2 R

Sub 4 R

Each Channel is Separately Controlled and Processed Example: Right Section

Control of Two Loudspeakers per ChannelExample: Right Section

Input Analog 1

Input Analog 2

Input Analog 3

Input Analog 4

Input Analog 1

Input Analog 2

Input Analog 3

Input Analog 4

Analog Audio

Output 3

Output 3

Output 4

Output 4

Output 2

Output 2

Output 1

Output 1

Bittner4X2000ewith Dante™

Bittner4X2000ewith Dante™

Input

Input

www.bittner-audio.com

Page 4: 4 Separate Channels - Bittner Audio... State-of-the-Art Speaker Management and Dante Networking Top 1 R Top 6 R Top 2 R Top 7 R Top 3 R Top 8 R Top 4 R Sub 1 R Sub 5 R Sub 3 …

State-of-the-Art Speaker Management and Dante™ Networking

Top 1 R

Top 6 R

Top 2 R

Top 7 R

Top 3 R

Top 8 R

Top 4 R

Sub 1 R

Sub 5 R

Sub 3 R

Sub 7 R

Sub 2 R

Sub 6 R

Sub 4 R

Sub 8 R

Top 5 R

Example: Right Section (16 Separate Channels )

Output1,2,3,4

Input1,2,3,4

Output5,6,7,8

Input5,6,7,8

Output9,1011,12

Input9,1011,12

Output13,14,15,16

Input13,14,15,16

Analog Audio

Output 3

Output 7

Output 4

Output 8

Output 2

Output 6

Output 1

Output 9

Output 10

Output 11

Output 12

Output 13

Output 14

Output 15

Output 16

Output 5

Lectrosonics DNT0212, Network Management

Network Switch

Bittner4X1200ewith Dante™

Bittner4X1200ewith Dante™

Bittner 4X2000e with Dante™

Bittner 4X2000e with Dante™

Input

Dan

te™

is a

tra

dem

ark

of A

udin

ate

Pty

Ltd

.

Bittner Audio International GmbH · Forststrasse 21a · D-95488 EckersdorfPhone: +49 (0)921 5070368-0 · Fax: +49 (0)921 5070368-9 · www.bittner-audio.com