BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Before NCS can be used a Profile must be loaded.

Select File/Load Profilfrom top menu bar

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select “Expertmode” then OK

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Once a profile is loaded the bottom buttons become

selectable

Select F1 to read vehicle data first.

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select F3 to read FA from ECU.This needs to be done before any

coding can be performed.

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select the model you are working with.

For this example “E65”Select OK once highlighted

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Choose the ECU to read the Vehicle Order from.

In this example “CAS”Select OK

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

The Model, VIN and VO should then be displayed

Select “F2” to modify VO

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select the model you are working with.

For this example “E65”Select OK once highlighted

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Verify that the VIN is correct.Note: last digit is a checksum

Select OK

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005 “Enter FA”

SA codes must begin With $

Service CodesMust begin

With +

Enter SA or Service codeThen select

“Add”

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

ExampleEnter $655

Select “Add”Scroll downTo check

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

ExampleEnter +EVERSelect “Add”Scroll down

to check.Select OK

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

After you have successfully changed the VO you will see this

screenSelect F6 (Back)

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select F4Process ECU

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select the CAS

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select F2Change job

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select “FA_WRITE”

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Verify Jobname is“FA_WRITE” and CAS is

ECU selected

Select F3Execute Job

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select F1Change ECU to select LM

This will ensure that new VO is written into CAS and LM

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select “LMA”

BMW GroupService TechnicalV4-US-A-21Paul Labrie /Klaus Lanny04/13/2005

Select F3

Execute Job

Verify Jobname is“FA_WRITE”

and LMA is ECU selected