. xxxx-51 (Smoke Damper)

.. LOGO .. .. 2551

LOGO

. xxxx-51 . xxxx-51 :

(Smoke Damper)

. xxxx-51 :

1) 2) 3) 4) . (1) .. (2) .. ..

5) 6). xxxx-51 :

1. 2. 3. 4. 5. 5.1. 5.2. 1 2 2 3 22 22 22

. xxxx-51 1. 1.1 1.1.1 1.1.2 (HVAC) : 1) 2) (Smoke Barrier) (Smoke Control System) 1.2 1.2.1 (Damper) : 1) (Smoke Damper) 2) (Combination Fire and Smoke Damper) 1.2.2 NFPA 90A , BOCA National Mechanical Code, SBCCI Standard Mechanical Code, IBCO Uniform Mechanical Code, International Mechanical Code 1.2.3 (Combination Fire and Smoke Damper)

-1-

2.

(Heated Air Operation) (Smoke Damper) (Dynamic Closure) (Fire Wall) (Smoke Control System) (Smoke Damper) (Fire Damper) (Combination Fire and Smoke Damper) (Fire Resistance Rating) NFPA251 Standard Methods of Tests of Fire Resistance of Building Construction and Materials (Actuator) (Damper) , (Heat Responsive Device) 3. 3.1 3.1.1 3.1.2 3.1.3 -2-

4. -3-

3.1.4 3.1.5 AMCA 500-D-98 Laboratory Methods for Testing Dampers for Rating 3.1.6 ASTM A653 / A653M - 00 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process 3.1.7 ASTM B555-86(1997) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test. 3.1.8 Fibrous Glass Duct Construction Standard 3.1.9 HVAC Duct Construction Standards 3.1.10 NFPA 90A, Standard for the Installation of Air-Conditioning and Ventilating Systems 3.1.11 NFPA 92A, Standard for Smoke-Control Systems Utilizing Barriers and Pressure Differences 3.1.12 NFPA 92B, Standard for Smoke Management Systems in Malls, Atria, and Large Spaces 3.1.13 NFPA101, Life Safety Code 3.1.14 NFPA105, Standard for the Installation of Smoke Door Assemblies and Other Opening Protectives 3.1.15 Sheet Metal and Air Conditioning Contractors National Association Inc. (SMACNA) 3.1.16 Standard for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment, UL1332 3.1.17 Standard for Test for Surface Burning Characteristics of Building Materials, UL723 3.1.18 Temperature-Indicating and - Regulating Equipment, UL873

4.1 4.1.1 (General) 4.1.1.1 (Electrical Components) (Damper Actuators), (Fusible Links), (Heat Responsive Devices) 4.1.1.2 (Heat Responsive Devices) ( Combination Fire and Smoke Damper) (Damper) (

) 4.1.2 (Protection Against Corrosion) 4.1.2.1 300 4.1.2.1.1 (Hot-dipped) G60 A60, Zinc-Coated (Galvanized) Zinc-Iron Alloy-Coated (Galvannealed) ASTM A653M 40 minimum single spot test ASTM , ASTM A90 A60 4.1.2.4 4.1.2.1.2 (Hot-dipped mill galvanized) 0.0101 (0.00041 ) ASTM B555 Annealed coating 2.5.4 4.1.2.1.3 2 0.0127 (0.0005 ) ASTM B555 4.1.2.1.4 (Alkyd-resin) UL1332 4.1.2.2 (Dampers) 4.1.2.3 (Dampers) 4.1.2.4 (Hot-dipped mill galvanized) A60 () (Annealed zinc coating)

-4-

4.1.2.1.4 4.1.2.5 4.1.2.5 25 4.1.2.5 4.1.3 (Actuators) 4.1.3.1 4.1.3.2 (Bolts) (Screw) 4.1.3.3 (Pneumatic Actuator) (Hydrostatic Pressure Test) 4.4.8 4.1.3.4 , (Position Indicator Switch) UL873 (Standard for Temperature-Indicating and Regulating Equipments) 4.2 4.2.1 4.2.2 4.2.2.1 4.2.2.2 4.2.3 4.2.3.1 -5-

UL 555S Standard for Safety Smoke Dampers 4.2.3.2 4.2.3.2.1 4.2.3.2.2 (Fusible Link) 4.2.3.2.3 (Fusible Link) 28 4.2.3.2.4 (Fusible Link) 71 4.2.3.2.5 28 4.2.3.2.6 (Degradation) 4.2.3.2.7 177 4.2.3.2.8 4.2.3.2.9 4.2.3.3 4.2.3.3.1 4.2.3.3.2

-6-

4.2.3.3.3

4.3 4.3.1 4.3.1.1 4.3.1.2 4.3.1.3 : 4.3.1.3.1 4.3.1.3.2 4.3.1.3.3 4.3.1.3.4 4.3.1.3.5 4.3.1.4 (Multiple Assembly) 4.3.1.4.1 4.3.1.4.2 , , , 4.3.1.4.3 4.3.1.4.4 4.3.1.5 4.3.1.5.1 4.3.1.5.2 15

-7-

4.3.1.5.3

(Commissioning Test)

-8-

4.4 4.4.1 4.4.1.1 - (Cycling Test) 4.4.2, (Temperature Degradation Test) 4.4.3, (Leakage Test) 4.4.4 (Operation Test) 4.4.5 (Dynamic Closure Test) 1 4.4.4 2

1 ( 4.4.1.1) (Square or Rectangular Damper) - - -

(Round Dampers)

- -

Correlation 4.4.4.4 2

-9-

2 ( 4.4.1.1) 1

(Square or Rectangular Damper) - - , - , -

2

3

4 5 6 7

, (Round Dampers) - - , - ,

1. Correlation 4.4.4.4 ( ) ( )

-10-

4.4.1.2 (Damper) , , , Blade Position Indicators (Fire Exposure Test) 4.7 610 x 610 (24 x 24 ) 610 , , , Blade Position Indicators (Accelerated Aging Test) 4.4.7 4.4.2 - (Cycling Test) 4.4.2.1 (Damper) , , - 20,000 - 100,000 () 75 - 20,000 4.4.2.1 (Reposition Cycles) 100,000 (Reposition Cycles) 5 (2 ) 10 1 4.4.2.1.1 (Damper Actuator) 10 (2 ) 5 (2 ) (Damper) (Damper) (Reposition Cycles) 1 100,000 4.4.2.1.2 (Damper Actuator) 10 (Reposition Cycles) 1 10,000 10 20 10 10,000 -11-

20 30 20 10,000 30 40, 40 50 , 50 60, 60 70, 70 80, 80 90, 90 100 100,000 4.4.2.2 (Volume Control Damper) 4.4.3 (Temperature Degradation Test) 4.4.3.1 4.4.3.2 4.4.3.3 4.4.3.2 56 (100 ) 121 (250 ) 30 4.4.3.3 30 - 75 4.4.4 (Leakage Test) 4.4.4.1 6 4.4.4.2 (Operation Test) 4.4.4.3 AMCA 500-D

-12-

4.4.4.4 - , - - 6 Correlation Method 4.4.4.5 - 4.4.4.10 4.4.4.5 - 4.4.4.1- 4.4.4.3 4.4.4.6 - , - - 4.4.4.7 4.4.4.7 4.4.4.6 - - 3 - 3 , AMCA 500-D 4.4.4.8 (Damper) 10.2 (2,000 ) 1.0 (4 ) 5.1 (1,000 ) 0.5 (2 ) 2 (400 ) (Damper) 0.12 (0.5 ) (Damper) 4.4.4.9 4.4.4.10 - - -13-

3 6 4.4.4.11 4.4.4.12 229 (9 ) 4.4.5 (Operation Test) 4.4.5.1 4.4.5.1.1 3 6 AMCA 500-D 0-49 (32-120 ) 4.4.5.1.2 1 1 4.4.5.1.3 (Damper) 10.2 (2,000 ) (Damper) 1.0 (4 ) 5.1 (1,000 ) 0.5 (2 ) 4.4.5.2 4.4.5.2.1 -14-

4.4.5.2.2

4.4.5.2.3

4.4.5.2.4

4.4.5.2.5 4.4.5.2.6 () () 10.2 1.0 15.2 1.0 20.3 1.0 10.2 1.5 15.2 1.5 20.3 1.5 10.2 2.0 15.2 2.0 20.3 2.0

0-49 (32-120 ) Dampers for rating, AMCA 500-D 3 3 ( 4.4.5.1.1) () () 12.2 1.12 17.3 1.12 22.3 1.12 12.2 1.62 17.3 1.62 22.3 1.62 12.2 2.12 17.3 2.12 22.3 2.12

-15-

3 2.0 (400 ) 0.12 (0.5 ) 4.4.5.2.8 - 75 75 3 4.4.5.2.9 4.4.5.2.10 - 3 17-28 (30-50 ) 1 15 75 75 4.4.5.2.11 4.4.5.2.12 9 305 (12 ) 10 4.4.5.3 (Multiple assembly) 4.4.5.3.1 4.4.5.1.2 4.4.5.3.2 4.4.5.2.7 -16-

4.4.5.3.3 (Damper) (Multiple assembly) 4.4.5.2.1-4.4.5.2.11 4.4.6 (Fire Exposure Test) 4.4.6.1 1) 15 ( 6 ) 2) 161 3) (Flame Index) 25 (Smoke Index) 50 (Standard for Test for Surface Burning Characteristics of Building Materials, UL723) 4.4.7 (Accelerated Aging Test) 4.4.7.1 (Nonmetallic Components) , , 4 5 4 ( 4.4.7.1) (Elongation) 25 (Tensile Strength) 60 60

-17-

5 (Accelerated Aging Conditions) ( 4.4.7.1) , , , , ( ) 1,440 129

4.4.7.2 , (Sealants) 5 4.4.7.3 (Adhesives) 5 50 4.4.7.4 (Tensile Strength) (Elongation) , UL 157 4.4.8 (Hydrostatic Strength Test) (Pneumatic Actuators) 4.4.8.1 4.4.8.2 1 50 4.4.8.2 5 4.4.9 (Classification) 4.4.9.1 (Leakage Test) 6 -18-

0.09 (1 ) 1 6 (Leakage Classifications) ( 4.4.4, 4.4.9) (Classifications) 1 2 3 1 2 3 , ft3/min/ft2 (m3/s/m2x196) 4.5 (1.1 ) 8 20 80 8.5 (2.1 ) 12.5 (3.1 ) 11 14 28 35 112 140

-19-

4.4.9.2 6 4.5 4.5.1 4.5.2 4.5.3 4.5.4 4.5.5 4.5.6 4.5.7 4.5.8 4.5.9 4.5.10

( 4.5) : . xxxx-51 : : : : : : xxx/xx

: ( . .)

-20-

( ) ( 4.5) : . xxxx-51 xxx/xx

( .) .

-21-

5.

5.1 5.1.1 5.1.1.1 , , 5.1.1.2 5.1.1.3 3 5.1.2 (Multiple assembly) : 5.1.2.1 5.1.2.2 5.1.2.3 (Operation Test) 5.1.2.4 (Operation Test) 5.1.2.5 , , 5.1.2.6 5.1.2.7 100,000 5.1.2.8 5.1.3 5.1.4 1 5.1.5 5.2 NFPA101, Life Safety Code NFPA 90A, Standard for the Installation of Air-Conditioning and Ventilating Systems NFPA 92A, Standard for Smoke-Control Systems Utilizing Barriers and Pressure Differences -22-

NFPA 92B, Standard for Smoke Management Systems in Malls, Atria, and Large Spaces NFPA105, Standard for the Installation of Smoke Door Assemblies and Other Opening Protectives Standard for Smoke Dampers, UL 555S

-23-