%SYS-5-CONFIG_I: Configured from console by console copy run
start Destination filename [startup-config]?
Buildingconfiguration... [OK] Router# Configurasi R4.RIPv2 ---
System Configuration Dialog --- Continue with configurationdialog?
[yes/no]: n Press RETURN to get started! Router>enable
Router#conf t Enter configuration commands, one per lineEnd with
CNTL/Z. Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.7.2
255.255.255.0Router(config-if)#no shutdown Router(config-if)#exit
Router(config)#interface fastEthernet 0/1 Router(config-if)#ip
address172.16.8.1 255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#ip dhcp pool
lan5Router(dhcp-config)#network 172.16.8.0 255.255.255.0
Router(dhcp-config)#default-router
172.16.8.1Router(dhcp-config)#dns-server 192.168.0.2
Router(dhcp-config)#exit Router(config)#router rip
Router(config-router)#versio2 Router(config-router)#network
172.16.7.0 Router(config-router)#network 172.16.8.0
Router(config-router)#^Z Router#%SYS-5-CONFIG_I: Configured from
console by console copy run start Destination filename
[startup-config]? Building
configuration... [OK] Router# Configurasi R5.RIPv2 --- System
Configuration Dialog --- Continue with configurationdialog?
[yes/no]: n Press RETURN to get started! Router>enable
Router#conf t Enter configuration commands, one per lineEnd with
CNTL/Z. Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.9.2
255.255.255.0Router(config-if)#no shutdown Router(config-if)#exit
Router(config)#interface fastEthernet 0/1 Router(config-if)#ip
address172.16.10.1 255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#ip dhcp pool
lan6Router(dhcp-config)#network 172.16.10.0 255.255.255.0
Router(dhcp-config)#default-router
172.16.6.1Router(dhcp-config)#dns-server 192.168.0.2
Router(dhcp-config)#exit Router(config)#router rip
Router(config-router)#versio2 Router(config-router)#network
172.16.9.0 Router(config-router)#network 172.16.10.0
Router(config-router)#^Z Router#%SYS-5-CONFIG_I: Configured from
console by console copy run start Destination filename
[startup-config]? Buildingconfiguration... [OK] Router# Configurasi
R6.RIPv2 --- System Configuration Dialog --- Continue with
configurationdialog? [yes/no]: n Press RETURN to get started!
Router>enable Router#conf t Enter configuration commands, one
per lineEnd with CNTL/Z. Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.2.2
255.255.255.0Router(config-if)#no shutdown Router(config-if)#exit
Router(config)#interface fastEthernet 0/1 Router(config-if)#ip
address172.16.7.1 255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#interface fastEthernet
1/0
Router(config-if)#ip address 172.16.9.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exitRouter(config)#router rip
Router(config-router)#version 2 Router(config-router)#network
172.16.2.0Router(config-router)#network 172.16.7.0
Router(config-router)#network 172.16.9.0 Router(config-router)#^Z
Router#%SYS-5-CONFIG_I: Configured from console by console copy run
start Destination filename [startup-config]?
Buildingconfiguration... [OK] Router# Configurasi R7.RIPv2 ---
System Configuration Dialog --- Continue with configurationdialog?
[yes/no]: n Press RETURN to get started! Router>enable
Router#conf t Enter configuration commands, one per lineEnd with
CNTL/Z. Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.0.2
255.255.255.0Router(config-if)#no shutdown Router(config-if)#exit
Router(config)#interface fastEthernet 0/1 Router(config-if)#ip
address172.16.1.1 255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#interface fastEthernet
1/0Router(config-if)#ip address 172.16.2.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exitRouter(config)#router rip
Router(config-router)#version 2 Router(config-router)#network
172.16.0.0Router(config-router)#network 172.16.1.0
Router(config-router)#network 172.16.2.0 Router(config-router)#^Z
Router#%SYS-5-CONFIG_I: Configured from console by console copy run
start Destination filename [startup-config]?
Buildingconfiguration... [OK] Router# Configurasi R1.OSPF ---
System Configuration Dialog --- Continue with configuration
dialog? [yes/no]: n Press RETURN to get started!
Router>enable Router#conf t Enter configuration commands, one
per lineEnd with CNTL/Z. Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 10.0.3.2
255.255.255.0Router(config-if)#no shutdown Router(config-if)#exit
Router(config)#interface fastEthernet 0/1 Router(config-if)#ip
address10.0.4.1 255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#ip dhcp pool
lan7Router(dhcp-config)#network 10.0.4.0 255.255.255.0
Router(dhcp-config)#default-router
10.0.4.1Router(dhcp-config)#dns-server 192.168.0.2
Router(dhcp-config)#exit Router(config)#router ospf
1Router(config-router)#log-adjacency-changes
Router(config-router)#network 10.0.3.0 0.0.0.225 area
0Router(config-router)#network 10.0.4.0 0.0.0.225 area 0
Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configuredfrom
console by console copy run start Destination filename
[startup-config]? Building configuration... [OK] Router#Configurasi
R2.OSPF --- System Configuration Dialog --- Continue with
configuration dialog? [yes/no]: n PressRETURN to get started!
Router>enable Router#conf t Enter configuration commands, one
per line. End with CNTL/Z.Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 10.0.1.2 255.255.255.0
Router(config-if)#no shutdownRouter(config-if)#exit
Router(config)#interface fastEthernet 0/1 Router(config-if)#ip
address 10.0.2.1 255.255.255.0Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#ip dhcp pool lan8
Router(dhcp-config)#network 10.0.2.0
255.255.255.0 Router(dhcp-config)#default-router 10.0.2.1
Router(dhcp-config)#dns-server 192.168.0.2Router(dhcp-config)#exit
Router(config)#router ospf 1
Router(config-router)#log-adjacency-changesRouter(config-router)#network
10.0.1.0 0.0.0.225 area 0 Router(config-router)#network 10.0.2.0
0.0.0.225 area 0Router(config-router)#^Z Router# %SYS-5-CONFIG_I:
Configured from console by console copy run start
Destinationfilename [startup-config]? Building configuration...
[OK] Router# Configurasi R3.OSPF --- System Configuration Dialog---
Continue with configuration dialog? [yes/no]: n Press RETURN to get
started! Router>enable Router#conf t Enterconfiguration
commands, one per line. End with CNTL/Z. Router(config)#interface
fastEthernet 0/0 Router(config-if)#ipaddress 10.0.0.2 255.255.255.0
Router(config-if)#no shutdown Router(config-if)#exit
Router(config)#interface fastEthernet0/1 Router(config-if)#ip
address 10.0.1.1 255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exitRouter(config)#interface fastEthernet 1/0
Router(config-if)#ip address 10.0.3.1 255.255.255.0
Router(config-if)#no shutdownRouter(config-if)#exit
Router(config)#router ospf 1
Router(config-router)#log-adjacency-changesRouter(config-router)#network
10.0.0.0 0.0.0.225 area 0 Router(config-router)#network 10.0.1.0
0.0.0.225 area 0Router(config-router)#network 10.0.3.0 0.0.0.225
area 0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I:
Configured
7/31/2019 43354
3/3
from console by console copy run start Destination filename
[startup-config]? Building configuration... [OK] Router#Configurasi
R1.STATIC --- System Configuration Dialog --- Continue with
configuration dialog? [yes/no]: n PressRETURN to get started!
Router>enable Router#conf t Enter configuration commands, one
per line. End with CNTL/Z.Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.14.2 255.255.255.0
Router(config-if)#noshutdown Router(config-if)#exit
Router(config)#interface fastEthernet 0/1 Router(config-if)#ip
address 192.168.15.1255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#ip dhcp pool
lan9Router(dhcp-config)#network 172.16.15.0 255.255.255.0
Router(dhcp-config)#default-router
192.16.15.1Router(dhcp-config)#dns-server 192.168.0.2
Router(dhcp-config)#exit Router(config)#ip route 0.0.0.0 0.0.0.0
172.16.14.1Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured
from console by console copy run start Destination
filename[startup-config]? Building configuration... [OK] Router#
Configurasi R2.STATIC --- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: n Press RETURN to
get started! Router>enable Router#conf t Enterconfiguration
commands, one per line. End with CNTL/Z. Router(config)#interface
fastEthernet 0/0 Router(config-if)#ipaddress 192.168.12.2
255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit
Router(config)#interfacefastEthernet 0/1 Router(config-if)#ip
address 192.168.13.1 255.255.255.0 Router(config-if)#no
shutdownRouter(config-if)#exit Router(config)#ip dhcp pool lan10
Router(dhcp-config)#network 172.16.13.0
255.255.255.0Router(dhcp-config)#default-router 192.16.13.1
Router(dhcp-config)#dns-server 192.168.0.2
Router(dhcp-config)#exitRouter(config)#ip route 0.0.0.0 0.0.0.0
172.16.12.1 Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured
from consolby console copy run start Destination filename
[startup-config]? Building configuration... [OK] Router#
Configurasi R3.STAT --- System Configuration Dialog --- Continue
with configuration dialog? [yes/no]: n Press RETURN to get
started!Router>enable Router#conf t Enter configuration
commands, one per line. End with CNTL/Z.
Router(config)#interfacefastEthernet 0/0 Router(config-if)#ip
address 192.168.12.1 255.255.255.0 Router(config-if)#no
shutdownRouter(config-if)#exit Router(config)#interface
fastEthernet 0/1 Router(config-if)#ip address 192.168.14.1
255.255.255.0Router(config-if)#no shutdown Router(config-if)#exit
Router(config)#interface fastEthernet 1/0 Router(config-if)#ip
address192.168.11.2 255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#ip route 172.16.13.0
255.255.255.0 172.16.12.2 Router(config)#ip route 172.16.15.0
255.255.255.0 172.16.14.2 Router(config)#ip route 0.0.0.00.0.0.0
172.16.11.1 Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured
from console by console copy run startDestination filename
[startup-config]? Building configuration... [OK] Router#
Configurasi R.REDISTRIBUTE --- SystemConfiguration Dialog ---
Continue with configuration dialog? [yes/no]: n Press RETURN to get
started! Router>enableRouter#conf t Enter configuration
commands, one per line. End with CNTL/Z. Router(config)#interface
fastEthernet 0/0Router(config-if)#ip address 192.168.4.1
255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exitRouter(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.11.1 255.255.255.0
Router(config-if)#noshutdown Router(config-if)#exit
Router(config)#interface fastEthernet 1/0 Router(config-if)#ip
address 172.16.0.1255.255.255.0 Router(config-if)#no shutdown
Router(config-if)#exit Router(config)#interface fastEthernet
1/1Router(config-if)#ip address 10.0.0.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exitRouter(config)#router eigrp 1
Router(config-router)#redistribute rip metric 1 0 255 255 1
Router(config-router)#redistributeospf 1 metric 256 0 255 255 1500
Router(config-router)#redistribute static
Router(config-router)#network 192.168.4.00.0.0.255
Router(config-router)#exit Router(config)#router ospf 1
Router(config-router)#log-adjacency-cangesRouter(config-router)#redistribute
rip subnets Router(config-router)#redistribute eigrp 1 subnets
