Upload
others
View
19
Download
0
Embed Size (px)
Citation preview
[1]
Bedienungsanleitung GSM Alarm
Das GSM* Alarm dient zur Überwachung der Zaunspannung. Bei Unterschreiten der Grenzwerte kann
eine SMS auf bis zu 5 gespeicherte Telefonnummern gesendet werden.
Es kann unter Verwendung des GSM‐Netzwerkes über ein gewöhnliches Mobiltelefon mit SMS‐Befehlen
gesteuert werden. Sie benötigen dazu eine SIM‐Karte eines Mobilfunkanbieters (nicht im Lieferumfang
des GSM Alarm enthalten).
Das GSM Alarm verfügt über zwei Ausgänge (A + B), die je nach Konfigurierung beide als „schaltbare
Ausgänge“ oder einer davon als ALARM‐Ausgang genutzt werden können.
Optional und abhängig von der Nähe zum Weidezaungerät kann mittels GSM Alarm das Weidezaungerät
EIN/AUS‐geschalten werden.
Das GSM Alarm kann mit 230V‐Netzadapter, mit einer 9V‐Batterie oder 12V‐Akku betrieben werden. Bei
9V‐ oder 12V‐Betrieb kann auf die Spanungsversorgung des Weidezaungerätes zugegriffen werden
(Anschluss an ERDE und ZAUN mittels Erdspießkabel E264355 und Herzklemme E203925, im
Lieferumfang enthalten)
* GSM = Global System for Mobile Communications BA‐1150‐Version 2013.2
Platzierung des GSM‐Alarm kann direkt bei der Zaunanlage
z.B. an einem Zaunpfahl erfolgen. Wir empfehlen, das Gerät
gegen direkte Sonneneinstrahlung zu schützen.
[2]
Inhaltsverzeichnis
1 Kurzübersicht einiger gängiger Gerätekombinationen 4
2 Ersteinrichtung SIM-Karte: 6
2.1 SIM-Karte kaufen 6
2.2 Neue SIM-Karte freischalten 6
2.3 SIM-Karte in das GSM Alarm einlegen 6
2.4 Systembatterie einsetzen 7
2.5 Initialisierung/LED-Beschreibung 7
3 Telefonnummern 8
3.1 Telefonnummer mit SMS-Alarmmeldung konfigurieren (Standard) 8
3.2 Telefonnummer ohne SMS-Alarmmeldung konfigurieren 8
3.3 Telefonnummer löschen 9
4 Alarmschwellen einstellen 10
4.1 Zaunspannung 10
4.1.1 Alarmschwelle Typ A 10
4.1.2 Alarmschwelle Typ B 11
4.1.3 Alarmschwelle Typ C 11
4.2 9V / 12V Versorgungsspannung 12
4.3 Systembatterie 12
5 Anschlüsse A und B 13
5.1 Technische Funktionsbeschreibung der Anschlüsse 13
5.1.1 Anschluss A (DC-Eingang/Ausgang) 13
5.1.2 Anschluss B (Relais) 13
5.2 Funktionsübersicht 13
5.3 Konfiguration einiger Gerätekombinationen 14
5.3.1 Fall 1 (230V) 14
5.3.2 Fall 2 (230V) 15
5.3.3 Fall 3 (230V) 16
5.3.4 Fall 4 (12V) 17
5.3.5 Fall 5 (12V) 18
5.3.6 Fall 6 (9V) 19
6 GSM-ALARM Ein-/Ausschalten 20
6.1 Einschalten GSM-ALARM 20
6.1.1 Per SMS 20
6.1.2 Per Anruf 20
6.2 Ausschalten GSM-ALARM 20
6.2.1 Per SMS 20
6.2.2 Per Anruf 20
7 Modus „Ein-/Ausschalten per Anruf“ freigeben oder sperren 21
7.1 Freigeben 21
7.2 Sperren 21
7.3 Quittier-Methode bei Anruf 21
7.3.1 Ton (= Werkseinstellung) 21
7.3.2 Rückruf 21
[3]
8 Gerätenamen 22
9 Verschiedenes 23
9.1 Statusabfrage 23
9.2 Statusanzeige 23
9.3 ALARM SMS-Meldung 23
9.4 Alarmzustand zurücksetzen 24
9.5 Guthaben auf SIM-Karte abfragen 24
9.6 Werkseinstellung 24
9.7 Technische Daten: 25
9.8 Serviceadressen: 25
10 Befehlsübersicht 26
11 Lieferumfang 28
[4]
1 Kurzübersicht einiger gängiger Gerätekombinationen
Fall 1 – (230 V)
SMS‐Alarm + 230V‐Weidezaungerät, siehe Punkt 5.3.1
Fall 2 – (230 V)
SMS‐Alarm + 230V‐Weidezaungerät + optisch/akustischer Signalgeber, siehe Punkt 5.3.2
Fall 3 – (230 V)
SMS‐Alarm + 230V‐Weidezaungerät + 230V‐EIN/AUS‐Schaltadapter, siehe Punkt 5.3.3
[5]
Fall 4 – (12 V)
SMS‐Alarm + 12V‐Weidezaungerät + EIN/AUS‐Schalten möglich, siehe Punkt 5.3.4
Fall 5 – (12 V)
SMS‐Alarm + 12V‐Weidezaungerät + EIN/AUS‐Schalten möglich + optisch/akustischer Signalgeber,
siehe Punkt 5.3.5
Fall 6 – (9 V)
SMS‐Alarm + 9V‐Weidezaungerät + EIN/AUS‐Schalten möglich, siehe Punkt 5.3.6
2
2.1
2.2
2.3
Erste
1 SIM‐K
(z.B. P
Bitte a
neuen
haben
da die
2 Neue
Neue SInform
3 SIM‐K
SIM‐Ka
SIM‐Kart
einrichtun
Karte kaufe
repaid‐Kart
achten Sie d
n GSM Alarm
n. Platzieren
s zum Verlu
Hinweis zgeschaltetIn der RegDas GSMfehlendem
e SIM‐Karte
SIM‐Karte bmationen zu
WICHTIG:
Mobiltele
auf 6789 ä
Karte in das
arte wie ab
te einsetzen
SIM‐Karte
sind dann
ng SIM‐Ka
en
te) kaufen b
darauf, das
m am Einsa
n Sie kein M
ust der Netz
zu Prepaid‐t ist, dass sgel wird dieM Alarm kam Guthaben
freischalte
beim Netzbeur Freischalt
PIN Ihrer n
efon in den
ändern.
s GSM Alarm
gebildet in
e sollte beim
niedriger b
rte:
bzw. vorhan
ss Sie mit Ih
atzort eine
Metall oder
zwerkverbin
‐Karten: Essie bei abgees der Fall seann in diesn keine Rück
en
etreiber fretung bitte b
neuen oder
Sicherheits
m einlegen
den SIM‐Ka
m Mobiltelef
bzw. entfalle
[6]
ndene SIM‐K
hrem ausge
starke Net
andere leit
ndung führe
s liegt am elaufenem ein. sem Fall Bkmeldung in
eischalten beim Netzan
der bereits
seinstellung
arten‐Slot, s
Halterun
fon und GS
en).
Karte verwe
ewählten Ne
tzqualität (m
tende Mate
en kann.
jeweiligenGuthaben
Befehle emn Form von
nbieter einh
s vorhande
gen vor Inbe
siehe Unter
g schließen und
M‐Alarm vo
enden
etzbetreibe
mehr als 1/
erialien in d
n Kartenanbweiterhin a
mpfangen uAnruf oder
holen!
nen GSM S
etriebnahm
seite GSM‐G
d verriegeln (LO
om selben A
er für die SI
/3 der Emp
er Nähe de
bieter, ob angerufen
nd ausführ SMS durch
IM‐Karte m
me des GSM
Gerät, einse
OCK)
Anbieter sei
IM‐Karte Ih
pfangsleistu
es GSM Alar
die Karte werden ka
ren, aber hführen.
mittels
M Alarm
etzen.
in (Kosten
res
ng)
rm,
so nn.
bei
2.4
Po
2.5
Na
Wä
Ze
ca.
LE
Inde
Inab
Infe
Zaan
Za
Ne
4 Syste
olung gemäß
5 Initia
achdem die P
ährend diese
itgleich zeigt
. 0,8 sec.)
ED GSM‐ALA
itialisierung es GSM‐ALRAM
itialisierung bgeschlossen O
itialisierung hlgeschlagen
aun ngeschlossen
aun anges
etzverbind
embatterie
ß Abbildung b
lisierung/L
Punkte 2.1 bi
es Vorganges
t das orange
ARM Initialis
Beschr
M rot g
OK AUS
rot
AUS g
schlossen,
dung OK
Nachdem
Konfigura
Während
erfolgten
einsetzen
beachten!
ED‐Beschre
is 2.4 durchg
s blinken die
Blinken, ob
sierung GSM‐A
reibung „blink
grün weiß
AUS AUS
AUS weiß
grün AUS
=>
=>
die Erstein
ationen dire
der Konfigu
Bestätigun
Batte
eibung
geführt wurd
LED’s gemä
eine GSM‐N
ALARM + Zaun
ken“
blau Abwec
AUS Aus
AUS 1x weiß
AUS blinkender Zau
richtung de
ekt an dem
uration dar
ng des voran
[7]
eriefachdeck
den, beginnt
ß nachfolgen
etzverbindu
nimpuls
chselnd
ß, 10x rot
n im Takt unimpulse
er SIM‐Kart
dafür vorge
rf ein weite
ngegangen
kel schließen
das GSM‐Ala
nder Beschre
ng vorhande
G
B
o
o
o
o
te abgeschlo
esehenen B
rer SMS‐Be
nen SMS‐Bef
n
arm sich zu i
eibung.
en ist (Takt c
GSM‐Netzverb
Beschreibung „
orangeTakt 0KEINE oder Takt 3Netzv
orange
orange
orange
ossen wurd
Betriebsort v
efehl frühes
fehls gesen
initialisieren.
ca. 3,0 sec.) o
bindung
„blinken“
0,8 sec. = E Netzverbind
3,0 sec = verbindung OK
de, sollten a
vorgenomm
stens 10 sec
ndet werden
.
oder nicht (T
ung
K
alle weitere
men werden
c. nach der
n.
Takt
en
n.
3
3.1
3.2
Telef
1. Parame
2. Parame
3. Parame
werden so
1 Telefo
Beispi
1. Pa
2. Pa
3. Pa
Ve
SMS:
Antwo
2 Telefo
Grund
optisc
SMS:
Antwo
fonnumm
Das GSM A
Paramete
unterschie
eter: legt fes
eter: legt fes
eter: legt fes
oll.
Aus Siche
erlaubt. A
gespeiche
Telefonnu
für Deutsc
Jede SMS
Kommand
D.h. nach
Es dürfen
onnummer
el: Die
ein
rameter:
rameter:
rameter.
rzögerung)
ad
ort: Ph
onnummer
d: Sie wüns
cher/akusti
ad
ort: Ph
mern
Alarm muss
rn per SMS
edlichen Ko
st, an welch
st, ob im Al
st, mit welc
rheitsgründ
Administrat
erten Tel. N
ummer imm
chland; 004
hat z.B. folg
do:Paramet
dem Komm
keine Leerz
r mit SMS‐A
e deutsche
ner Alarmsit
004912
y (= yes
0 (= 0 M
dnumber:0
one No. 004
r ohne SMS
chen nur ei
scher Signa
dnumber:0
one No. 004
s mit minde
konfigurier
nfiguration
he Telefon‐
armfall eine
cher Verzög
den sind be
ionsrechte
r.
mer mit ausg
5 für Dänem
gendes Form
er,Paramet
mando steht
zeichen ent
Alarmmeldu
Telefonnum
tuation per
2345678901
s – Ja, es soll
Minuten – d.
049123456
491234567
‐Alarmmeld
ine Alarmm
aleinheit (An
049123456
491234567
[8]
estens einer
rt werden. E
nen, hinterle
Nr. im Alarm
e SMS gese
gerung in M
estimmte Ko
hat automa
geschrieben
mark, usw.)
mat einzuha
ter,Paramet
t ein Doppe
thalten sein
ung konfigu
mmer 0123
SMS inform
(Tel‐Nr. inkl
l eine SMS‐M
h. keine zeit
678901,y,0
78901 added
dung konfig
meldung mit
nschluss B)
678901,n,0
78901 added
r Telefonnu
Es können m
egt werden
mfall eine S
ndet werde
Minuten (ma
ommandos
atisch das T
ner Internat
angeben.
alten:
ter
elpunkt, zwi
.
urieren (Sta
45678901 s
miert werde
. internation
Meldung gese
liche
d
gurieren
tels
.
d
mmer und z
max. 5 Telef
.
SMS gesend
en soll (y=JA
x. 60 min) e
nur mit Ad
Telefon mit
tionaler Vor
schen den P
ndard)
soll unmitte
en.
nale Vorwahl
endet werde
zwei weiter
fonnumme
det werden
A oder n=NE
eine SMS ge
dministrato
t der zuerst
rwahlnumm
Parametern
elbar nach A
l)
en)
ren
rn, auch mi
soll.
EIN)
esendet
orrechten
mer (z.B. 004
n ein Komm
Auftreten
t
49
ma.
3.3
3 Telefo
Beisp
SMS:
Antw
diese
onnummer
piel: Die
de
wort: Ph
Wi
e fal
zur
r löschen
e Telefonnu
lnumber:00
one No. 004
ird versehe
sch program
rückgesetzt
ummer 0049
0491234567
491234567
ntlich die z
mmiert, mu
t werden.
[9]
912345678
78901
78901 delete
uerst einge
uss das GSM
901 soll gel
ed
egebene Te
M‐Alarm au
öscht werd
lefon‐Nr. ge
f die Werks
den
elöscht, od
seinstellung
er wurde
g (siehe 9.66)
4
4.1
4.1
Da
Ko
Ala
Alarm
1 Zauns
Die A
Wert
werd
und/o
Beisp
SMS:
Antw
1.1 Alarm
as GSM‐Alar
ontaktpunkt
armschwell
mschwell
spannung
Alarmschwe
soll abhäng
en. Bei Unt
oder option
piel: Zau
fen
un
wort: the
Nach Konf
Zaunbedin
verschiede
Erde) „sim
und somit
Achtung:
Zaunspan
gewählte
mschwelle Ty
rm und das
ten ist nicht
e : z.B. 6,0
en einstel
lle der Zaun
gig vom Ger
erschreitun
naler Signalg
unspannun
ncealarm:4.
bedingt bea
e command
figuration u
ngungen (ke
enen Punkt
muliert“ wer
t der Alarm
Eine zu hoh
nung allein
Alarmschw
yp A
Weidezaun
t getrennt =
kV ( 6000 V
llen
nspannung
rätestandor
ng der einge
geber)
gsalarm sol
5
achten !!! D
d fencealarm
und Inbetrie
ein Bewuch
en in der Za
rden um zu
aktiviert wi
he Alarmsch
n durch unte
wellen führe
ngerät sind
= Alarmschw
Volt )
[10]
ist werkseit
rt und Zaun
estellten Sch
ll auf 4,5 kV
Den Dezima
m:4.5 accep
ebnahme de
hs, gute Isola
aunanlage e
testen, ob
ird.
hwelle kann
erschiedlich
en im Gege
örtlich beie
welle soll in
tig auf 3,0 k
nsituation zw
hwelle wird
V eingestellt
l als PUNKT
pted
es GSM Alar
ation, gute
ein Kurzsch
die passend
n Fehlalarm
he Witterun
nzug ggf. zu
einander. De
diesem Fal
kV (3000 Vo
wischen 2,5
d Alarm ausg
t werden
T schreiben
rm sollte be
Verbindung
luss (Verbin
de Alarmsch
m auslösen.
ng verände
u ausbleibe
er Zaundrah
l höher sein
olt) eingeste
5 kV bis 8,0
gelöst (SM
ei guten
gen/Erdung
ndung von Z
hwelle defin
Z.B. kann s
rn/reduzie
enden Meld
ht zwischen
n.
ellt. Dieser
kV eingeste
S‐Meldung
g, usw.) an
Zaundraht z
niert wurde
sich die
ren. Zu geri
dungen.
n den beiden
ellt
zur
e
ing
n
[11]
4.1.2 Alarmschwelle Typ B
Das GSM‐Alarm und das Weidezaungerät sind auch örtlich beieinander, Zaunanfang und –ende jedoch
voneinander getrennt – Alarmschwelle soll in diesem Fall geringer sein.
Alarmschwelle : z.B. 3,0 kV ( 3000 Volt )
4.1.3 Alarmschwelle Typ C
Das GSM‐Alarm und das Weidezaungerät sind örtlich getrennt. Das GSM‐Alarm benötigt eine eigene
Stromversorgung ( 9V, 12V oder 230V). Je weiter das GSM‐Alarm vom Weidezaungerät entfernt am
Zaun angeschlossen ist, desto geringer soll die Alarmschwelle sein.
Alarmschwelle : z.B. X = 10 m : 6,0 kV ( 6000 Volt ) X = 1000 m : 3,0 kV ( 3000 Volt )
X = 100 m : 5,0 kV ( 5000 Volt ) X > 1000 m : 2,5 kV ( 2500 Volt )
X = 500 m : 4,0 kV ( 4000 Volt )
* = 230V Netzadapter, 12V‐Akku oder 9V Weidezaunbatterie, welche vor Regen geschützt werden müssen.
4.2
4.3
2 9V / 1
Die A
autom
Spannverso
9 Volt
12 Vo
Beisp
SMS:
Antw
3 Syste
(nicht
Die Ü
Wert
12V Versorg
Alarmschwe
matisch an.
nungs‐ orgung
AWfü
t 6,
olt 12
piel: Die
mb
un
wort: the
embatterie
t einstellbar
Überwachun
es wird ein
Die
Ve
Die
Be
ve
gungsspann
lle passt sic
Bei Untersc
utomatischWerkseinsteür ALARM
,0 Volt
2,3 Volt
e Alarmschw
balarm:12.1
bedingt bea
e command
r )
ng der Syste
Alarm ausg
e Systemba
rsorgungss
e Systemba
triebspause
rhindern!
nung
ch werkseiti
chreitung d
e llung
Emp
SalinAlka
11,9
welle der Sp
1
achten!!! D
d mbalarm:1
embatterie i
gelöst (SMS‐
tterie verso
pannung fü
atterie (AKK
en aus dem
[12]
g an die en
der Alarmsc
pfehlung
ne‐Batterie aline‐ Batter
9 V – 12,3 V
pannungsve
en Dezimal
12.1 accept
ist auf 3,6 V
‐Meldung u
orgt das GSM
ür ca. 48 Stu
KU, Art.‐No.
m GSM Alarm
tsprechend
hwelle wird
: 6,0 Vrie : 7,0 V
ersorgung s
als PUNKT
ed
V eingestellt
und/oder op
M‐Alarm be
unden mit S
. E268218)
m entfernt
e Spannung
d eine SMS‐
Anmerkun
je nach ZaWert entswerden
kann je naminimal 11
oll auf 12,1
schreiben
t. Bei Unter
ptionaler Sig
ei Verlust de
trom.
muss währ
werden, um
gsversorgun
Meldung ge
ng
unsituationprechend a
ach Akku‐Zu1,5 V verän
V eingeste
rschreitung
gnalgeber).
er GSM
rend länger
m eine Tiefe
ng
esendet.
n sollte der angepasst
ustand bis dert werde
llt werden
dieses
rer
entladung z
en
zu
[13]
5 Anschlüsse A und B
Funktionsbeschreibung, Statusanzeige und Konfiguration
5.1 Technische Funktionsbeschreibung der Anschlüsse
5.1.1 Anschluss A (DC‐Eingang/Ausgang)
Er dient als Anschluss für die Stromversorgung des GSM‐Alarm (=Eingang).
Mit ihm kann auch ein batteriebetriebenes Weidezaungerät per Anruf oder SMS ein‐
/ausgeschaltet werden (=Ausgang).
5.1.2 Anschluss B (Relais)
‐ nur verwendbar bei 12V oder 230V Betrieb
Werkseitig ist dieser Ausgang deaktiviert.
In Funktion Alarmausgang wird das Relais im Alarmfall eingeschalten (bei 9V Batteriebetrieb
nicht möglich) und bleibt in diesem Zustand bis der Alarm zurückgesetzt (Punkt9.4) wird.
Wird der Ausgang als Schaltausgang konfiguriert, kann in Verbindung mit unserem (Zubehör)
„EIN/AUS Schaltadapter“ Art. Nr. 441030 z. B. ein 230V‐Weidezaungerät per Anruf ein‐
/ausgeschaltet werden.
Beispiel: Relais bei Alarm schalten
SMS: relfunc:al
Antwort: the command relfunc:al accepted
Beispiel: DC Ausgang als Schaltausgang
SMS: dcout:sw
Antwort: the command dcout:sw accepted
5.2 Funktionsübersicht
Spannungs‐versorgung
Fall ALARM möglich über: Ein‐/ Ausschalten
GSM‐ALARM (siehe 6.1 und 6.2)
Weidezaungerät wird über GSM‐Alarm mit Ein‐/ Ausgeschalten SMS‐Alarm Signalgeber
230 V
1 X X
2 X X X
3 X X X
12 V 4 X X X
5 X X X X
9 V 6 X X X
5.3
5.3
3 Konfi
3.1 Fall 1
GSM‐
44102
An‐schlu
Dcou
A
Re
B
(Powe
* E2
Kabel
iguration ei
Die beiden
außer dies
A = dcout
(230V)
‐ALARM
22‐230
ss Besch
ut Spannversoranges
l Anschbelegt
er ON und P
203925 (Her
l ersetzt we
iniger Gerät
n SMS‐Befe
se folgende
func:sw ,
Weidezaun
230 V
reibung
nungs‐rgung chlossen
hluss nicht t
Power OFF,
rzklemme) m
erden.
tekombinat
hle müssen
e werkseitig
B = relfunc
ngerät Zu
konfigurieren a
Schalt‐ausgang
keine Funktio
siehePunkt
muss nach d
[14]
tionen
n für die ver
en Einstellu
c:no
usatzgeräte
‐
‐als
SMS‐B
g dcout
n relfun
t 6.1)
den örtliche
rschiedenen
ungen sind n
e
Befehl: P
(
tfunc:sw
nc:no
en Begeben
n Fälle imm
noch aktiv:
Funkt
SMS‐A
Status bzw
Power ON
(siehe Punkt 6
heiten evtl
er durchgef
ionen
ALARM
w. ALARM‐ A
6.1)
Pow
(sieh
. durch ein
führt werde
Anzeige bei
wer OFF
he Punkt 6.2)
längeres
en,
:
[15]
5.3.2 Fall 2 (230V)
GSM‐ALARM Weidezaungerät Zusatzgeräte Funktionen
441022‐230 230 V optisch oder akustischer
Signalgeber (ALARM**)
SMS‐ALARM
+ separater ALARM**
An‐schluss
Beschreibung konfigu‐rieren als
SMS‐Befehl:
Statusanzeige wenn KEIN Alarm
Alarmanzeige bei ALARM
Power ON
(siehe Punkt 6.1)
Power OFF
(siehe Punkt 6.2)
Dcout A
Spannungs‐versorgung angeschlossen
Schalt‐ausgang
dcoutfunc:sw
KEIN Alarm: Alarm:
KEIN Alarm: Alarm:
Rel
B
akustisch oder optischer Signalgeber **
Schalt‐ausgang
relfunc:al
(Power ON und Power OFF, siehe Punkt 6.1)
* E203925 (Herzklemme) muss nach den örtlichen Begebenheiten evtl. durch ein längeres
Kabel ersetzt werden.
** optisch bzw. akustischer Alarm muss für diese Anwendung separat dazu bestellt werden.
[16]
5.3.3 Fall 3 (230V)
GSM‐ALARM Weidezaungerät Zusatzgeräte Funktionen
441022‐230 230 V 230 V Ein‐ Ausschaltadapter
441030**
SMS‐ALARM +
Ein‐/Ausschalten
An‐schluss
Beschreibung konfigu‐rieren als
SMS‐Befehl:
Status bzw. ALARM‐ Anzeige bei:
Power ON
(siehe Punkt 6.1)
Power OFF
(siehe Punkt 6.2)
Dcout A
Spannungs‐versorgung angeschlossen
Schalt‐ausgang
dcoutfunc:sw
Rel
B
230 V Ein‐ Ausschaltadapter angeschlossen
Schalt‐ausgang
relfunc:sw
(Power ON und Power OFF, siehe Punkt 6.1)
* E203925 (Herzklemme) muss nach den örtlichen Begebenheiten evtl. durch ein längeres
Kabel ersetzt werden.
** 441030 (230V Ein‐/Ausschaltadapter) muss für diese Anwendung separat dazu bestellt
werden.
[17]
5.3.4 Fall 4 (12V)
GSM‐ALARM Weidezaungerät Zusatzgeräte Funktionen
441022‐12 12 V ‐ SMS‐ALARM +
Ein‐/Ausschalten
An‐schluss
Beschreibung konfigu‐rieren als
SMS‐Befehl:
Status bzw. ALARM‐ Anzeige bei:
Power ON
(siehe Punkt 6.1)
Power OFF
(siehe Punkt 6.2)
Dcout A
Spannungs‐versorgung angeschlossen
Schalt‐ausgang
dcoutfunc:sw
Rel
B Anschluss nicht belegt
keine Funktion
relfunc:no
(Power ON und Power OFF, siehe Punkt 6.1)
* E203925 (Herzklemme) muss nach den örtlichen Begebenheiten evtl. durch ein längeres
Kabel ersetzt werden.
[18]
5.3.5 Fall 5 (12V)
GSM‐ALARM Weidezaungerät Zusatzgeräte Funktionen
441022‐12 12 V optisch oder akustischer Signalgeber (ALARM**)
SMS‐ALARM +
Ein‐/Ausschalten +
separater ALARM**
An‐schluss
Beschreibung konfigu‐rieren als
SMS‐Befehl:
Statusanzeige wenn KEIN Alarm
Alarmanzeige bei ALARM
Power ON
(siehe Punkt 6.1)
Power OFF
(siehe Punkt 6.2)
Dcout A
Spannungs‐versorgung angeschlossen
Schalt‐ausgang
dcoutfunc:sw
KEIN Alarm:
Alarm:
KEIN Alarm:
Alarm: Rel
B
akustisch oder optischer Signalgeber **
Alarm‐ausgang
relfunc:al
(Power ON und Power OFF, siehe Punkt 6.1)
* E203925 (Herzklemme) muss nach den örtlichen Begebenheiten evtl. durch ein längeres
Kabel ersetzt werden.
** optisch bzw. akustischer Alarm muss für diese Anwendung separat dazu bestellt werden.
[19]
5.3.6 Fall 6 (9V)
GSM‐ALARM Weidezaungerät Zusatzgeräte Funktionen
441022‐9 9 V ‐ SMS‐ALARM +
Ein‐/Ausschalten
An‐schluss
Beschreibung konfigu‐rieren als
SMS‐Befehl: Status bzw. ALARM‐ Anzeige bei:
Power ON
(siehe Punkt 6.1)
Power OFF
(siehe Punkt 6.2)
Dcout A
Spannungs‐versorgung angeschlossen
Schalt‐ausgang
dcoutfunc:sw
Rel
B Anschluss nicht belegt
keine Funktion
relfunc:no
(Power ON und Power OFF, siehe Punkt 6.1, 6.2)
* E203925 (Herzklemme) muss nach den örtlichen Begebenheiten evtl. durch ein längeres
Kabel ersetzt werden.
6
6.1
6.1
6.1
6.2
6.2
6.2
GSM
Das Sc
Nach e
schalt
a)
b)
1 Einsc
1.1 Per SM
S
A
1.2 Per An
G
A
2 Aussc
2.1 Per SM
S
A
2.2 Per An
G
A
M‐ALARM
chalten der
expliziter Fr
en gegeben
Für Wartu
empfehlen
zu vermei
In den Fäl
5.2
In den Fäl
geschalten
Wenn das
das GSM‐A
halten GSM
MS
SMS:
Antwort:
nruf
GSM‐Alarm
Antwort:
chalten GSM
MS
SMS:
Antwort:
nruf
GSM‐Alarm
Antwort:
Ein‐/Auss
Anschlüsse
reigabe (sie
n werden.
ungsarbeite
n wir gener
den.
len 3,4,5 un
len 1 und 2
n werden (s
s Weidezaun
Alarm auto
M‐ALARM
power
power
: anrufe
ist abh
M‐ALARM
power
power
: anrufe
ist abh
schalten
e A + B erfol
ehe Punkt 7
n an der Za
ell das GSM
nd 6 wird da
muss das W
siehe Punkt
ngerät in de
matisch nac
ron
ron OK
en
hängig von d
roff
roff OK
en
hängig von d
[20]
lgt werkseit
7) kann jede
unanlage o
M‐Alarm aus
as Weideza
Weidezaung
5.2)
en Fällen 1 u
ch 1 Minute
der Quittier
der Quittier
tig per SMS
er Telefonnu
der um Tier
szuschalten
ungerät MI
gerät innerh
und 2 wiede
e wieder akt
r‐Methode,
r Methode,
.
ummer das
re von der W
, um ungew
T ein‐/ausg
halb 1 Minu
er eingesch
tiviert.
siehe Punk
siehe Punkt
Recht per A
Weide zu ho
wollte Alarm
geschalten,
ute separat
alten wird,
kt 7.3
t 7.3
Anruf zu
olen,
mmeldungen
siehe Punkt
aus‐
wird dadur
n
t
rch
7
7.1
7.2
7.3
7.3
7.3
Mod
Das Schalt
versehent
möglich.
1 Freige
Die Fr
SMS:
Antw
2 Sperr
Das S
SMS:
Antw
3 Quitt
Das GSM‐
GSM‐Alar
Konfigurie
3.1 Ton (=
Hier n
aufein
folgen
3.2 Rückr
Diese
Schal
zurüc
angen
SMS:
Antw
dus „Ein‐/A
ten der Aus
tliches bzw.
eben
reigabe erfo
sw
wort: the
ren
Sperren erfo
sw
wort: the
tier‐Method
‐Alarm ermö
m den Ausg
erung, bestä
= Werkseinst
nimmt das G
nander folg
nden Tönen
ruf
er Quittier M
ten der Aus
ckgerufen( a
nommen, fa
an
wort:: the
Na
Ausschalt
sgänge per A
. unbefugte
olgt durch f
witchbycall:0
e command
olgt durch fo
witchbycall:0
e command
de bei Anru
öglicht das
gang/die Au
ätigt. Nachf
tellung)
GSM‐Alarm
genden Tön
n mit sinken
Modus ist de
sgänge der
abhängig vo
allen weder
swer:recall
e command
achteil: Sie e
ten per An
Anruf ist au
s Schalten d
folgende An
0049123456
d switchbyca
olgende An
0049123456
d switchbyca
uf
Schalten de
usgänge ges
folgend sind
den Anruf
en mit steig
nder Freque
er kostengü
Anruf abgew
om Mobilfu
r beim Anru
d answer:rec
erhalten ke
[21]
nruf“ freig
us Sicherhei
der Ausgän
nweisung
678901,y
all:0049123
weisung
678901,n
all:0049123
es Relais‐ un
schaltet, wi
d die Bestät
entgegen u
gender Freq
enz bestätig
ünstigste. W
wiesen. Ans
nkanbieter
ufer noch be
call accepte
eine Info üb
geben ode
tsgründen w
ge durch An
345678901,
345678901,
nd/oder des
rd der erfol
tigungsvaria
und antwort
quenz. Das A
gt, siehe Pun
Wird das GSM
schließend
und Signals
eim GSM‐Al
ed
ber den Zust
er sperren
werkseitig g
nrufen des G
y accepted
n accepted
s DC‐Ausgan
gte Vorgan
anten besch
tet nach de
Ausschalten
nkt 10, Aufz
M Alarm an
wird der An
stärke) . Wi
larm Gebüh
tand (ein/a
n
gesperrt. So
GSM‐Alarm
ngs per Anr
g, je nach
hrieben.
em Einschalt
n wird mit 3
zählung Nr.
ngerufen, w
nrufer für ca
rd das Gesp
hren an.
aus) der Aus
omit ist ein
m nicht
ruf. Hat das
ten mit 3
3 aufeinand
7.3.
ird nach de
a. 10‐20 sec
präch nicht
sgänge.
s
er
m
c
8 Gerä
Jede SMS
Werkseins
Bei Verwe
Gerät eine
welchem
Gerätenam
Beispiel:
SMS:
Antwort:
ätenamen
Meldung b
stellung: AKO
endung meh
en eindeuti
GSM Alarm
me kann mi
ne
Na
Na
Für den G
n
beginnt in Ze
O GSM Alarm
hrerer GSM
gen Namen
m Sie eine M
it der Anwe
uer Name s
ame:An den
ame change
erätename
eile 1 mit de
m
Alarm Gerä
n zu geben,
Mitteilung be
eisung Nam
soll „an den
Birken
d to an den
en können m
[22]
em Geräten
äte ist es si
damit Sie w
ekommen h
me:xxx geän
n Birken“ lau
n birken
max. 16 Zei
namen.
nnvoll, jede
wissen, von
haben. Der
ndert werde
uten
chen ( inkl.
em
en.
Leerzeicheen) verwenddet werdenn
[23]
9 Verschiedenes
9.1 Statusabfrage
Der Status der Zaunanlage kann jeder Zeit per SMS angefordert werden.
SMS: status
Antwort: siehe Punkt 9.2
9.2 Statusanzeige
Beschreibung Anzeige im Statusbericht (Beispiel)
Anmerkung
Gerätename an den birken
SMS‐Typ <Status>
Anschluss A (DCout) DCout:ON
Anschluss B (Rel) Rel:OFF
Systembatterie Backup battery: 3.98V (68%) <3,6 V = 0%
Versorgungsspannung Weidezaungerät (Standard) bzw. GSM‐Alarm, siehe Punkt 4.1.3
Main battery: 12.4V (54%) % ‐ Angabe wird im 9V Betrieb nicht angezeigt.
Zaunspannung Fence voltage: 5.1 KV
Signalstärke Signal: (++___) + = wenig +++++ = optimal
9.3 ALARM SMS‐Meldung
Eine SMS‐Meldung „ALARM!!“ wird ausgelöst, wenn bei der Systembatterie, Versorgungsspannung
und/oder Zaunspannung (=Alarmverursacher) der aktuelle Wert unterhalb der Alarmschwelle, siehe
Punkt 4 liegt und Punkt 3.1 eingerichtet wurde.
Beschreibung Anzeige im Alarmbericht (Beispiel)
Anmerkung
Gerätename an den birken
SMS‐Typ ALARM!!
Anschluss A (DCout) DCout:ON
Anschluss B (Rel) Rel:OFF
Systembatterie Backup battery: 3.98V (68%) <3,6 V = 0%
Versorgungsspannung Weidezaungerät (Standard) bzw. GSM‐Alarm, siehe Punkt 4.3
Main battery: 12.4V (54%) % ‐ Angabe wird im 9V Betrieb nicht angezeigt.
Zaunspannung ‐> Fence voltage: 2.1 KV Alarmverursacher
Signalstärke Signal: (++___) + = wenig +++++ = optimal
9.4
9.5
9.6
In Bildbeis
markiert d
4 Alarm
Der Alarm
Erfolgt zu
dadurch e
5 Gutha
Abhängig
Befehle au
Beispiel:
SMS:
6 Werk
Das GSM A
werden. D
Status‐LED
(Das gelbe
Anschließ
spiel hat die
den „Verurs
Jetzt muss
gesucht u
verursach
muss dan
mzustand
mverursache
einem spät
erkannt wer
Es wird je
Systemba
Wird inne
Alarm‐Me
aufrechte
aben auf SI
vom Provid
uftreten (z.
Gu
cre
kseinstellun
Alarm kann
Dazu wird d
D nach 20x
e Blinken ist
end führt d
Alle bereit
eingegebe
e Zaunspan
sacher“ dies
s der Fehler
nd beseitig
ht haben, w
n aufgelade
zurückse
er wird mit d
teren Zeitpu
rden.
doch imme
tterie, Vers
erhalb von 2
eldung aktiv
rhalten, bis
IM‐Karte ab
der können
B. *100#, *
uthabenabfr
edit:*100#
ng
n jeder Zeit
der Reset Ta
blinken von
t hierbei nic
das GSM Ala
ts vorgenom
en werden.
nung (Fenc
ser SMS‐Me
r in der Zau
gt werden. S
ird dies mit
en/ausgeta
etzen
dem in Pun
unkt eine St
er die zum Z
sorgungsspa
2 Stunden d
viert. Diese
s der Alarm
bfragen
hier unters
101#, etc.)
rage mit *10
auf Werkse
aster solang
n blau auf g
cht relevant
arm einen N
mmenen Ko
[24]
e voltage) d
eldung.
unanlage (z.
Sollte eine d
t dem Pfeil
auscht werd
kt 9.3 besc
tatusabfrag
Zeitpunkt d
annung und
der Alarmve
e Alarm‐Me
mverursache
schiedliche S
00#
einstellung z
ge gedrückt
grün umscha
t)
Neustart du
onfiguratio
die SMS‐Me
.B. Draht am
der Batterie
„‐>“ markie
den.
hriebenen „
ge, siehe 9.1
er Statusab
d Zaunspan
erursacher
ldung wird
er beseitigt
SMS‐
zurückgeset
t, bis die
altet.
rch.
onen sind da
eldung ausg
m Boden, zu
espannung
ert. Die ent
„‐>“ Pfeil „e
1, kann der A
bfrage aktue
nnung ange
nicht besei
solange im
wird.
tzt
amit gelösc
gelöst. Der P
u viel Bewu
gen die SMS
tsprechend
eingefroren
Alarmverur
ellen Werte
ezeigt.
itigt, wird e
m 2 Stunden
cht und müs
Pfeil „‐>“
uchs etc.)
S‐Meldung
e Batterie
“.
rsacher
e von
eine erneute
n Intervall
ssen neu
e
[25]
9.7 Technische Daten:
Anschluß A: Spannung: 6 – 14 VDC Strom je nach Versorgungsquelle: Netzadapter: max. 800 mA Trockenbatterie: max. 45 mA 12V Akku: max. 1,6 A Dieser Anschluss (4pol. Flachstecker) ist werkseitig als Schaltausgang konfiguriert. Anschluß B: Belastbarkeit des Relaiskontakt (Schalt Steckdose) Spannung: 250 VAC. Strom rein ohmisch: max. 8 A Strom induktiv: max. 2 A Der Relais Ausgang ist ein potentialfreier Wechsel‐Schaltkontakt, Belastung siehe oben. GSM‐ALARM Stromverbrauch: 5 mA (max. 17 mA beim Laden der Systembatterie) Schutzklasse : IP64
9.8 Serviceadressen:
SERVICE Deutschland: AKO‐Agrartechnik GmbH & Co.KG (Garantiegeber) Karl‐Maybach‐Str. 4 88239 Wangen‐Schauwies GERMANY Tel.Nr.: +49 7520 9660 0
SERVICE Österreich: Kerbl Austria Handels GmbH Wirtschaftspark 1 9130 Poggersdorf
AUSTRIA Tel.Nr.: +43 4224 81555 0
[26]
10 Befehlsübersicht
3.1 3.2
Telefon‐Nr. mit oder ohne SMS‐Meldung konfigurieren
Nr. 1. Parameter Telefon‐Nr.
2. Parameter SMS‐Meldung ja oder nein
3. Parameter Verzögerung
SMS‐Befehl Beispiele
11 gemäß Kunde y oder n in Minuten
0‐60 addnumber: addnumber:00497520966055,y,15
2 addnumber:00497520966056,y,30
3 addnumber:00497520966057,y,0
4 addnumber:00497520966058,n,0
5 addnumber:00497520966059,y,54
Antwort: Phone No gemäß Kunde added
3.3
Telefon‐Nr. mit löschen
welche Telefon‐Nr.
SMS‐Befehl Beispiele Antwort
einzelne Nr.
gemäß Kunde
delnumber: delnumber:00497520966055 Phone No 00497520966055 deleted
alle Nrn. delallnumber: delallnumber: security numbers memory erased
4 ALARM‐Schwellen einstellen
welche V Werks‐
einstellung2
möglicherBereich
SMS‐Befehl Beispiele Antwort
Zaunspannung 3,0 kV 2,5kV – 8,0 kV
fencealarm: fencealarm:4.5 the command fencealarm:4.5 accepted
Versorgungs
‐spannung3
Weidezaun‐gerät
9V 6,0 V 6,0 V – 9,0 V
mbalarm: mbalarm:7.0 the command mbalarm:7.0 accepted
12V 12,3 V 11,5V – 12,3V
mbalarm:11.9 the command fencealarm:11.9 accepted
3,6V nicht einstellbar
5 Anschlüsse A und B konfigurieren
welcher Anschluss
welche Funktion
Spannungsversorgung Hinweis SMS‐Befehl Antwort am Beispiel dcoutfunc:al 230 V 12 V 9 V
A Dcout
keine X X X nur 1 Funktion möglich
dcoutfunc:no the command dcoutfunc:al accepted
Schalten4 X X X dcoutfunc:sw
Alarm X X X dcoutfunc:al
B Rel
keine5 X X nur 1
Funktion möglich
relfunc:no
Schalten X X relfunc:sw
Alarm X X relfunc:al
1 = Administrator 2 = Werkseinstellung Zaunspannung, Versorgungsspanungen 3 = Alarmschwelle passt sich werkseitig an die entsprechende Versorgungsspannung an
Im 230 V Betrieb reduziert der Netzadapter die Spannungsversorgung von 230 V auf 12V 4 = Werkseinstellung Dcout ( A) 5 = Werkseinstellung Rel (B)
[27]
6.1 6.2
GSM‐Alarm Ein‐/Ausschalten6
Aktion wie: SMS‐Befehl Antwort
EIN SMS poweron poweron OK
anrufen ‐ gemäß Punkt 7.3
AUS SMS poweroff poweroff OK
anrufen ‐ gemäß Punkt 7.3
7.1 7.2
Modus“Ein‐/Ausschalten per Anruf“ freigeben oder sperren
Aktion SMS‐Befehl Antwort
Freigeben switchbycall:00497520966055,y the command switchbycall:00497520966055,y,accepted
Sperren switchbycall:00497520966055,n the command switchbycall:00497520966055,n,accepted
7.3 Quittier Methode bei Anruf
welche wie erfolgt die Quittierung SMS‐Befehl Antwort
Ton7 Beim Einschalten
answer:ton the command answer:ton accepted
Beim Ausschalten
Rückruf Rückruf des GSM‐Alarm für 10‐20 sec. answer:recall the command answer:recall accepted
8 Gerätenamen
welcher Beschreibung SMS‐Befehl Beispiel Antwort
Werkseinstellung AKO GSM Alarm ‐ ‐
ändern Flower8 name: name:Flower Name changed to Flower
.* = Für den Gerätenamen können max. 16 Zeichen ( inkl. Leerzeichen) verwendet werden
9.5 Guthaben auf SIM‐Karte abfragen
wie SMS‐Befehl Beispiel Antwort
Abhängig vom Mobilfunkanbieter credit: credit:*100# Abhängig vom Mobilfunkanbieter credit:*101#
6 = Weidezaungerät wird bei Fall 3,4,5 und 6 mit Ein‐/Ausgeschalten 7 = Werkseinstellung für Quittier Methode 8 = Für den Gerätenamen können max. 16 Zeichen ( inkl. Leerzeichen) verwendet werden.
[28]
11 Lieferumfang
Artikel‐Nr. Beschreibung Bild Geräteausführung
441022‐0
441022‐230
441022‐12
441022‐9
GSM‐ALARM‐1 GSM‐ALARM
X X X X
371018 Netzadapter für GSM‐Alarm
X
371019 12 Volt Kabel für GSM‐Alarm
X
371020 9V Kabel für GSM‐Alarm
X
E264335 Erdspieß
X X X X
E203925 Herzklemme
X X X X
E268218 Akku (Systembatterie)
X X X X
BA‐1150 Bedienungsansweisung
X X X X
441030 230V Ein‐/Ausschaltadpater
kann für 441022‐230 separat dazu bestellt werden
[1]
Operating instructions for GSM alarm
The GSM* alarm serves to monitor the fence voltage. If the values go below the limit, an SMS can be sent
to up to 5 saved telephone numbers.
It can be controlled via the GSM network, using a conventional mobile phone by means of SMS
commands. You will also need a SIM card from a mobile network operator (not included in the scope of
delivery of the GSM alarm).
The GSM alarm is equipped with two outputs (A + B) that can both be used as "switchable outputs" or
one of them can be used as an ALARM output, depending on the configuration.
Depending on the proximity to the electric fence device, the option exists to use the GSM alarm to switch
the electric fence device ON or OFF.
The GSM alarm can be operated with a 230 V mains adapter, with a 9 V battery or a 12 V rechargeable
battery. In 9 V or 12 V operation, the power supply of the electric fence device can be accessed.
(Connection to EARTH and FENCE via earthing cable E264355 and heart clip E203925, included in the
scope of delivery).
* GSM = Global System for Mobile Communications BA‐1151 Version 2013.1
The GSM alarm can be placed directly on the electric fence,
e.g. on a fence post. We recommend that you protect the
device against direct sunlight.
[2]
Table of contents
1 Brief overview of some common device combinations 4
2 Initial installation of the SIM card: 6
2.1 Purchase a SIM card 6
2.2 Activate the new SIM card 6
2.3 Insert the SIM card into the GSM alarm 6
2.4 Insert the system battery 7
2.5 Initialisation/LED description 7
3 Telephone numbers 8
3.1 Configuring a telephone number with SMS alarm notification (standard) 8
3.2 Configuring a telephone number without SMS alarm notification 8
3.3 Deleting a telephone number 9
4 Setting alarm thresholds 10
4.1 Fence voltage 10
4.1.1 Alarm threshold Type A 10
4.1.2 Alarm threshold Type B 11
4.1.3 Alarm threshold Type C 11
4.2 9 V / 12 V supply voltage 12
4.3 System battery 12
5 Connections A and B 13
5.1 Technical functional description of connections 13
5.1.1 Connection A (DC input/output) 13
5.1.2 Connection B (relay) 13
5.2 Functional overview 13
5.3 Configuration of certain device combinations 14
5.3.1 Instance 1 (230 V) 14
5.3.2 Instance 2 (230 V) 15
5.3.3 Instance 3 (230 V) 16
5.3.4 Instance 4 (12 V) 17
5.3.5 Instance 5 (12 V) 18
5.3.6 Instance 6 (9 V) 19
6 Switch GSM ALARM on/off 20
6.1 Switching GSM ALARM on 20
6.1.1 By SMS 20
6.1.2 By call 20
6.2 Switching GSM ALARM off 20
6.2.1 By SMS 20
6.2.2 By call 20
7 Enabling or blocking "Switch on/off by call" mode 21
7.1 Enabling 21
7.2 Blocking 21
7.3 Acknowledgement method for call 21
7.3.1 Sound (= factory setting) 21
7.3.2 Call-back 21
[3]
8 Device name 22
9 Miscellaneous 23
9.1 Status query 23
9.2 Status display 23
9.3 ALARM SMS notification. 23
9.4 Resetting the alarm status 24
9.5 Querying credit on the SIM card 24
9.6 Factory setting 24
9.7 Technical data: 25
9.8 Service addresses: 25
10 Command overview 26
11 Scope of delivery 28
[4]
1 Brief overview of some common device combinations
Instance 1 – (230 V)
SMS alarm + 230 V electric fence device, see point 5.3.1
Instance 2 – (230 V)
SMS alarm + 230 V electric fence device + visual/audible signal generator, see point 5.3.2
Instance 3 – (230 V)
SMS alarm + 230 V electric fence device + 230 V switch ON/OFF adapter, see point 5.3.3
[5]
Instance 4 – (12 V)
SMS alarm + 12 V electric fence device + switch ON/OFF possible, see point 5.3.4
Instance 5 – (12 V)
SMS alarm + 12 V electric fence device + ON/OFF switching possible + visual/audible signal generator,
see point 5.3.5
Instance 6 – (9 V)
SMS alarm + 9 V electric fence device + ON/OFF switching possible, see point 5.3.6
2
2.1
2.2
2.3
Initia
1 Purch
(e.g. a
Please
the po
other
conne
2 Activ
ActivaPlease
3 Insert
Insert
Insert SI
al installat
hase a SIM
prepaid ca
e make sure
ossible rece
conductive
ction to the
Note on pworks in usually poIn this cascredit, you
ate the new
te your newe obtain info
IMPORTA
accessing
operation
t the SIM ca
the SIM car
M card
The SIM c
(costs are
tion of th
card
rd) or use a
e that the SI
eption qual
e materials
e network.
prepaid casuch a wayossible. se, the GSMu will not re
w SIM card
w SIM card ormation on
ANT: Chang
the securit
n.
ard into the
rd into the S
ard for the
then lower
e SIM car
an existing S
IM card of y
ity) for you
in the vic
rds: It depy that it ca
M alarm caneceive any f
with the nen the activa
e the PIN
ty settings
e GSM alarm
SIM card slo
Clos
mobile pho
r or do not a
[6]
d:
SIM card
your new G
ur chosen n
inity of the
ends on than still be
n receive anfeedback in
etwork operation proces
for your
on a mobi
m
ot, as pictur
se and lock (LOC
one and the
apply).
SM alarm h
network op
e GSM alar
he particulacalled even
nd carry outthe form o
rator. ss from the
new or ex
ile phone b
red, see bot
CK) the holder
e GSM alarm
has a strong
perator. Do
rm as this
ar card pron if the cre
t commandsf a call or SM
network pr
xisting GSM
before putt
ttom of GSM
m should be
g signal (mo
o not place
can cause
ovider wheedit has ru
s; howeverMS messag
rovider.
M SIM card
ting the GS
M device.
e from the s
ore than 1/3
any metal
it to lose
ther the can out. This
, if there is e.
d to 6789
SM alarm in
ame operat
3 of
or
its
ard s is
no
by
nto
tor
2.4
Ad
2.5
Aft
Du
At
sec
LE
Inth
Inco
Infa
Feco
Fe
Ne
4 Insert
dhere to the
5 Initia
ter points 2.1
uring this pro
the same tim
conds) or no
ED GSM ALA
itialisation of e GSM ALARM
itialisation ompleted OK
itialisation iled
ence onnected
ence conn
etwork co
t the system
polarity sho
lisation/LE
1 to 2.4 have
ocess, the LE
me, the oran
ot (approx. ev
RM Initialis
Descrip
M Red G
OFF
Red
OFF G
ected, =>
onnection
After the i
should be
During co
seconds af
m battery
own in the pi
D descriptio
e been carrie
Ds flash acco
nge light flash
very 0.8 seco
sation of GSM
ption of "flash
Green White
OFF OFF
OFF White
Green OFF
>
OK =>
initial setup
carried out
nfiguration
after receivi
cture! Clo
on
ed out, the G
ording to the
hes to show
onds)
M ALARM + fen
hing"
e Blue Alter
OFF Off
e OFF 1x w
OFF Flashfrequpulse
p of the SIM
t directly in
n, an additio
ng confirma
[7]
ose the batte
GSM alarm be
e following d
whether a G
nce pulse
rnating
hite, 10x red
hing based onuency of fencees
M card is com
n the operat
onal SMS co
ation that t
ry compartm
egins to initi
escription.
GSM network
e
mpleted, al
tion locatio
ommand ca
the previou
ment cover
alise.
k connection
GSM networ
Description o
Orange
EveNO or EveNet
Orange
Orange
Orange
ll further co
on provided
an be sent n
us SMS com
n exists (appr
rk connection
of "flashing"
ery 0.8 secondnetwork con
ery 3.0 secondtwork connect
onfiguration
d for them.
no sooner t
mmand was
rox. every 3.
ds = nection
ds = tion OK
n steps
than 10
sent.
0
3
3.1
3.2
Telep
1st parame
2nd param
3rd param
1 Confi
Examp
1. Pa
2. Pa
3. Pa
SMS:
Respo
2 Confinotifi
Reaso
signa
SMS:
Respo
phone nu
The GSM a
additional
have diffe
eter: Specifi
meter: Spec
meter: Speci
For securi
rights. The
automatic
Always en
Germany,
Each SMS
Command
i.e. a colon
permitted
iguring a te
ple: Th
im
rameter:
rameter:
rameter.
Ad
nse: Ph
iguring a teication
on: You only
l unit (Conn
Ad
nse: Ph
mbers
alarm must
l parameter
erent config
es the telep
cifies wheth
ifies the de
ty reasons,
e telephone
cally.
nter the tele
0045 for D
must adhe
d:paramete
n after the c
d.
lephone nu
e German p
mediately a
004912
y (= yes
0 (= 0 m
dnumber:0
one No. 004
lephone nu
y want an al
nection B).
dnumber:0
one No. 004
t be configu
rs. A maxim
urations.
hone numbe
her an SMS
lay with wh
, certain com
e with the n
ephone num
enmark, etc
re to the fo
r,paramete
command a
umber with
phone numb
after an alar
2345678901
s – Yes, an SM
minutes ‐ i.e.
0049123456
491234567
umber with
arm notific
0049123456
491234567
[8]
ured by SMS
mum of 5 tel
er to which
is to be sen
hich an SMS
mmands ar
number tha
mbers with t
c.).
ollowing for
r,paramete
and a comm
h SMS alarm
ber 0123 45
rm situation
(telephone
MS notificati
. no time del
678901,y,0
78901 added
hout SMS al
ation via a v
678901,n,0
78901 added
S with at lea
ephone num
an SMS is to
nt in the cas
S is to be se
re only allow
at was save
the designa
mat:
er
ma between
m notificatio
5678901 sh
n occurs.
number inclu
ion should b
ay)
d
arm
visual/audib
d
ast one tele
mbers can b
o be sent in t
e of an alar
nt in minute
wed to thos
ed first has a
ated country
the param
on (standar
ould be info
uding countr
e sent)
ble
ephone num
be stored, t
the case of a
rm (y=YES o
es (maximu
se with adm
administrat
y code (e.g.
meters. No s
rd)
ormed by S
ry code)
mber and tw
they may al
an alarm.
or n=NO)
um 60 min).
ministrator
tor rights
. 0049 for
paces are
MS
wo
l
3.33 Delet
Exam
SMS:
Respo
ting a telep
mple: Th
de
onse: Ph
If y
is p
(se
hone numb
e telephone
lnumber:00
one No. 004
you inadver
programme
ee 9.6).
ber
e number 0
0491234567
491234567
rtently dele
ed incorrect
[9]
0049123456
78901
78901 delete
ete the first
tly, the GSM
678901 is to
ed
t telephone
M alarm mu
o be deleted
number th
ust be reset
d
hat was ent
t to its facto
tered or if t
ory settings
his
s
4
4.1
4.1
Th
be
Ala
Setti
1 Fence
The fa
on th
If the
optio
Exam
SMS:
Respo
1.1 Alarm
e GSM alar
etween the
arm thresho
ing alarm
e voltage
actory setti
e location o
value goes
nal signal g
mple: Th
fen
Co
onse: the
After conf
good (no p
short circu
test wheth
activated.
Caution: T
may chan
selected a
m threshold T
rm and the e
two contac
old: e.g. 6.0
threshold
ng for the a
of the devic
s below the
generator )
e fence volt
ncealarm:4.
mpliance is
e command
figuring and
plant cover,
uit (connect
her a suitab
Too high an
ge or reduc
alarm thres
Type A
electric fen
t points. In
0 kV (6000 v
ds
alarm thresh
ce and the fe
threshold t
tage alarm
5
s essential !
d fencealarm
d putting the
, good insul
t the fence w
ble alarm th
n alarm thre
ce simply du
holds are to
ce device a
this case, t
volts)
[10]
hold of the
ence situat
that is set, a
is to be set
!! Write the
m:4.5 accep
e GSM alarm
lation, good
wire to the
hreshold wa
eshold may
ue to variou
oo low, not
re in the sa
he alarm th
fence volta
ion, this val
an alarm is t
to 4.5 kV
e decimal sy
pted
m into oper
d connectio
earth) in va
s defined a
cause false
us weather
tifications m
me location
hreshold sho
age is 3.0 kV
ue should b
triggered (S
ymbol as a D
ration, if the
ns/earthing
arious parts
nd, therefo
e alarms, e.
r conditions
may be miss
n. The fence
ould be high
V (3000 volt
be set to 2.5
SMS notifica
DOT
e fence con
g, etc.), "sim
s of the fenc
ore, that the
.g. the fenc
s. On the ot
sed.
e wire is no
her.
ts). Depend
5 kV to 8.0
ation and/o
nditions are
mulate" a
ce in order
e alarm is
e voltage
ther hand, i
t split
ing
kV.
or
to
if
[11]
4.1.2 Alarm threshold Type B
The GSM alarm and the electric fence device are in the same location, however the start and end of the
fence are split . The alarm threshold should be lower in this case.
Alarm threshold: e.g 3.0 kV (3000 volts)
4.1.3 Alarm threshold Type C
The GSM alarm and the electric fence device are in separate locations. The GSM alarm requires its own
power supply (9 V, 12 V or 230 V). The further the GSM alarm is connected to the fence from the electric
fence device, the lower the alarm threshold should be.
Alarm threshold: e.g. X = 10 m : 6.0 kV (6000 volts) X = 1000 m : 3.0 kV (3000 volts)
X = 100 m : 5.0 kV (5000 volts) X > 1000 m : 2.5 kV (2500 volts)
X = 500 m : 4.0 kV (4000 volts)
* = 230 V mains adapter, 12 V rechargeable battery or 9 V electric fence battery which must be protected against rain.
4.2
4.3
2 9 V /
The fa
autom
Supplvoltag
9 volt
12 vo
Exam
SMS:
Respo
3 Syste
(not a
Moni
trigge
12 V supply
actory setti
matically. If
ly ge
AFafo
ts 6
olts 12
mple: Th
mb
Co
onse: the
em battery
adjustable)
toring for t
ered (SMS n
Th
po
Th
rem
a t
y voltage
ng of the al
the value g
utomatic actory settior ALARM
.0 volts
2.3 volts
e alarm thr
balarm:12.1
mpliance is e
e command
he system b
notification
e system ba
wer supply
e system ba
moved from
otal discha
larm thresh
goes below
ng Reco
SalinAlka
11.9
eshold for t
1
essential!!! W
d mbalarm:1
battery is se
and/or opt
attery supp
is lost.
attery (REC
m the GSM
rge!
[12]
hold is adjus
the alarm t
ommendati
ne battery aline battery
9 V ‐ 12.3 V
the supply v
Write the d
12.1 accept
et to 3.6 V.
ional signal
lies the GSM
CHARGEABL
alarm durin
sted to the c
threshold, a
ion
: 6.0 V y : 7.0 V
voltage sho
ecimal sym
ed
If the value
l generator)
M alarm for
LE BATTERY
ng long shu
correspond
n SMS notif
Remark
The value according
Can be chaminimum the batter
uld be set t
bol as a DO
goes below
).
r approxima
Y, art. no. E
tdown peri
ding supply v
fication is s
should be ato the fenc
anged downof 11.5 V acry status
to 12.1 V
OT
w this, an al
ately 48 hou
E268218) m
iods in orde
voltage
ent.
adjusted ce situation
n to a ccording to
arm is
urs if the GS
ust be
er to preven
SM
nt
[13]
5 Connections A and B
Functional description, status display and configuration
5.1 Technical functional description of connections
5.1.1 Connection A (DC input/output)
It serves as the connection for the power supply of the GSM alarm (=input).
It can also be used to switch a battery‐operated electric fence device on or off (=output) by call
or SMS.
5.1.2 Connection B (relay)
‐ only usable in 12 V or 230 V operation
This output is deactivated at the factory.
In the alarm output function, the relay is activated in the case of an alarm (not possible in 9 V
battery operation) and remains in this state until the alarm is reset (point9.4).
If the output is configured as a switch output in conjunction with our "ON/OFF switching
adaptor" (accessory) article number 441030, a 230 V electric fence device can be switched
on/off by call, for example.
Example: Switch relay with alarm
SMS: relfunc:al
Response: the command relfunc:al accepted
Example: DC output as switch output
SMS: dcout:sw
Response: the command dcout:sw accepted
5.2 Functional overview
Supply voltage
Instance
ALARM possible through: Switch on/off GSM ALARM
(see 6.1 and 6.2)
Electric fence device is switched on/off via
GSM alarm SMS alarm Signal
generator
230 V
1 X X
2 X X X
3 X X X
12 V 4 X X X
5 X X X X
9 V 6 X X X
5.3
5.3
3 Confi
3.1 Instan
GSM
44102
Conne
DC
A
R
B
(Powe
* E2
situat
iguration of
The two S
following
A = dcout
nce 1 (230 V)
ALARM
22‐230
ection Descr
out A
Supplconne
el
B Connused
er ON and P
203925 (hea
tion.
f certain de
MS comma
factory sett
func:sw ,
)
Electric fendevice
230 V
ription
ly voltage ected
ection not
Power OFF,
art clip) may
evice combi
ands must a
tings are sti
B = relfunc
ce Ad
‐
Configu
Switch output
No func
see point 6
y have to be
[14]
inations
always be ex
ll active:
c:no
dditional de
ure as SMS c
dcout
ction relfun
6.1)
e replaced b
xecuted for
evices
command: P(
tfunc:sw
nc:no
by a longer
r the various
Functi
SMS A
Status o
Power ON
(see point 6.1)
cable depe
s instances
ions
ALARM
or ALARM d
)
Pow
(see
nding on th
unless thes
display for:
wer OFF
point 6.2)
he local
se
[15]
5.3.2 Instance 2 (230 V)
GSM ALARM Electric fence device
Additional devices Functions
441022‐230 230 V Visual or audible signal
generator (ALARM**)
SMS ALARM
+ separate ALARM**
Connection
Description Configure as SMS command:
Status display when NO alarm
Alarm display upon ALARM
Power ON
(see point 6.1)
Power OFF
(see point 6.2)
DCout A
Supply voltage connected
Switch output
dcoutfunc:sw
NO alarm: Alarm:
NO alarm: Alarm:
Rel
B Audible or visual signal generator **
Switch output
relfunc:al
(Power ON and Power OFF, see point 6.1)
* E203925 (heart clip) may have to be replaced by a longer cable depending on the local
situation.
** Visual or audible alarm must be ordered separately for this application.
[16]
5.3.3 Instance 3 (230 V)
GSM ALARM Electric fence device
Additional devices Functions
441022‐230 230 V 230 V on/off switching
adapter 441033 **
SMS ALARM +
Switch on/off
Connection Description Configure as SMS command:
Status or ALARM display for:
Power ON
(see point 6.1)
Power OFF
(see point 6.2)
DCout A
Supply voltage connected
Switch output
dcoutfunc:sw
Rel
B
230 V on/off switching adapter connected
Switch output
relfunc:sw
(Power ON and Power OFF, see point 6.1)
* E203925 (heart clip) may have to be replaced by a longer cable depending on the local
situation.
** 441030 (230 V on/off switching adapter) must be ordered separately for this application.
[17]
5.3.4 Instance 4 (12 V)
GSM ALARM Electric fence device
Additional devices Functions
441022‐12 12 V ‐ SMS ALARM +
Switch on/off
Connection Description Configure as SMS command:
Status or ALARM display for:
Power ON
(see point 6.1)
Power OFF
(see point 6.2)
DCout A
Supply voltage connected
Switch output
dcoutfunc:sw
Rel
B Connection not used
No function relfunc:no
(Power ON and Power OFF, see point 6.1)
* E203925 (heart clip) may have to be replaced by a longer cable depending on the local
situation.
[18]
5.3.5 Instance 5 (12 V)
GSM ALARM Electric fence device
Additional devices Functions
441022‐12 12 V Visual or audible signal generator (ALARM**)
SMS ALARM +
Switch on/off +
Separate ALARM**
Connection Description Configure as SMS command:
Status display when NO alarm
Alarm display upon ALARM
Power ON
(see point 6.1)
Power OFF
(see point 6.2)
DCout A
Supply voltage connected
Switch output
dcoutfunc:sw
NO alarm:
Alarm:
NO alarm:
Alarm:
Rel
B Audible or visual signal generator **
Alarm output
relfunc:al
(Power ON and Power OFF, see point 6.1)
* E203925 (heart clip) may have to be replaced by a longer cable depending on the local
situation.
** Visual or audible alarm must be ordered separately for this application.
[19]
5.3.6 Instance 6 (9 V)
GSM ALARM Electric fence device
Additional devices Functions
441022‐9 9 V ‐ SMS ALARM +
Switch on/off
Connection Description Configure as SMS command:Status or ALARM display for:
Power ON
(see point 6.1)
Power OFF
(see point 6.2)
DCout A
Supply voltage connected
Switch output
dcoutfunc:sw
Rel
B Connection not used
No function relfunc:no
(Power ON and Power OFF, see point 6.1, 6.2)
* E203925 (heart clip) may have to be replaced by a longer cable depending on the local
situation.
6
6.1
6.1
6.1
6.2
6.2
6.2
Swit
The fa
After e
rights
fence
a)
b)
1 Switc
1.1 By SM
S
R
1.2 By cal
G
R
2 Switc
2.1 By SM
S
R
2.2 By cal
G
R
ch GSM A
actory settin
explicitly en
to switch o
We gener
system or t
In instance
5.2
In instance
point 5.2
ching GSM A
MS
SMS:
Response:
ll
GSM alarm
Response:
ching GSM A
MS
SMS:
Response:
ll
GSM alarm
Response:
ALARM on
ng for switc
nabling the
on and off b
ally recomm
to collect an
es 3,4,5 and
es 1 and 2 t
ALARM on
power
power
: call
Depen
ALARM off
power
power
: call
Depen
n/off
hing connec
option (see
y call.
mend switch
nimals from
d 6 the elec
the electric
ron
ron OK
nds on the a
roff
roff OK
nds on the a
[20]
ctions A + B
e point 7), a
hing off the
m the pastur
ctric fence d
fence devic
acknowledg
acknowledg
B is by SMS.
ny telephon
e GSM alarm
re to avoid u
device is ALS
ce must be
ement met
ement met
.
ne number
m for mainte
unwanted a
SO switched
switched of
hod, see po
hod, see po
can be prov
enance wor
alarm messa
d on/off, se
ff separatel
oint 7.3
oint 7.3
vided with
rk on the
ages.
ee point
y (see
7
7.1
7.2
7.3
7.3
7.3
Enab
For securi
unauthori
1 Enab
The fo
SMS:
Respo
2 Block
The fo
SMS:
Respo
3 Ackno
The GSM
switched t
configurat
3.1 Sound
The G
frequ
in fre
3.2 Call‐b
This c
switc
mobi
incur
SMS:
Answ
bling or bl
ity reasons,
ised switchi
ling
ollowing co
sw
onse: the
king
ollowing co
sw
onse: the
owledgeme
alarm allow
the output(
tion. The co
d (= factory s
GSM alarm a
uency after s
quency, see
back
confirmatio
hing the ou
le commun
red by the c
an
wer: the
Dis
ou
ocking "S
switching t
ing of the o
ommand im
witchbycall:0
e command
ommand im
witchbycall:0
e command
ent method
ws the relay
(s), it confir
onfirmation
setting)
answers the
switching o
e point 10, l
n mode is t
utputs. The
ications pro
caller or the
swer:recall
e command
sadvantage
tputs.
witch on/
the outputs
utputs by c
plements e
0049123456
d switchbyca
plements b
0049123456
d switchbyca
d for call
and/or the
ms that the
variants ar
e call and re
n. Switchin
list no. 7.3.
he most ec
caller is the
ovider and s
e GSM alarm
d answer:rec
e: You do no
[21]
/off by cal
s by call is b
calling the G
nabling
678901,y
all:0049123
blocking
678901,n
all:0049123
e DC output
e operation
re described
esponds wit
g off is conf
onomical. I
en called ba
signal stren
m.
call accepte
ot receive in
ll" mode
locked by d
GSM alarm i
345678901,
345678901,
to be switc
was compl
d below.
th 3 consec
firmed by 3
f the GSM a
ck for appro
gth). If the
ed
nformation
default. As a
s not possib
y accepted
n accepted
ched by call
eted, depen
utive sound
consecutiv
alarm is call
ox. 10‐20 se
call is not a
n about the
a result, ina
ble.
l. If the GSM
nding on th
ds that incre
ve sounds th
led, it ends
ec (dependi
answered, n
state (on/o
dvertent or
M alarm
e
ease in
hat decreas
the call afte
ing on the
no costs are
off) of the
r
se
er
8 Devi
Each SMS
Factory set
If you use s
unique nam
notification
Name:xxx
Example:
SMS:
Response
ce name
notification
tting: AKO G
several GSM
me so you ca
n. The devic
x.
Th
Na
: Na
Max. 16 c
n starts wit
GSM alarm
alarm devic
an identify th
ce name can
e new nam
ame:an den
ame change
haracters (
h the device
ces, it makes
he GSM alarm
n be change
e should be
Birken
d to an den
incl. spaces
[22]
e name in t
sense to giv
m from whic
ed using the
e "an den Bi
n birken
s) can be us
he 1st line.
ve each devic
ch you receiv
e command
irken"
sed for the d
ce a
ved the
d
device nammes
[23]
9 Miscellaneous
9.1 Status query
The status of the electric fence can be requested by SMS at any time.
SMS: Status
Response: See point 9.2
9.2 Status display
Description Display in status report (Example)
Remark
Device name an den birken
SMS type <Status>
Connection A (DCout)
DCout:ON
Connection B (Rel) Rel:OFF
System battery Backup battery: 3.98 V (68%) <3.6 V = 0%
Supply voltage Electric fence device (standard) or GSM alarm, see point 4.1.3
Main battery: 12.4 V (54%) % ‐ Entry is not displayed in 9 V operation.
Fence voltage Fence voltage: 5.1 KV
Signal strength Signal: (++___) + = insufficient +++++ = optimal
9.3 ALARM SMS notification.
An "ALARM!!" SMS message is triggered if the current value of the system battery, supply voltage and/or
fence voltage (cause of alarm) is below the configured alarm threshold, see point 4 and point 3.1.
Description Display in alarm report (example)
Remark
Device name an den birken
SMS type ALARM!
Connection A (DCout)
DCout:ON
Connection B (Rel) Rel:OFF
System battery Backup battery: 3.98 V (68%) <3.6 V = 0%
Supply voltage Electric fence device (standard) or GSM alarm, see point 4.3
Main battery: 12.4 V (54%) % ‐ Entry is not displayed in 9 V operation.
Fence voltage ‐> Fence voltage: 2.1 kV Cause of alarm
Signal strength Signal: (++___) + = insufficient +++++ = optimal
9.4
9.5
9.6
In the exa
"‐>" arrow
4 Rese
The cause
If there is
Switching c
status. The
SMS:
Response
5 Query
Dependin
command
Example:
SMS:
6 Facto
The GSM
time. To d
status LED
(the yellow
The GSM
ample illustr
w marks the
The error
eliminated
If one of t
arrow. The
etting the
e of the alar
a status qu
However,
always dis
connections
e alarm stat
ala
: ala
ying credit
g on the pr
ds may occu
Cre
cre
ory setting
alarm can b
do this, the
D switches f
w flashing i
alarm then
This delet
again.
ration, the f
e "origin" of
(e.g. wire o
d in the elec
he battery v
e correspon
alarm stat
rm is "froze
uery at a late
the curren
splayed at t
A + B off or
tus can also
armreset
armreset OK
on the SIM
ovider, diffe
ur here (e.g.
edit query u
edit:*100#
be reset to i
reset butto
from blue to
s not releva
performs a
tes all config
fence voltag
f this SMS n
on the floor,
ctric fence.
voltages ha
nding batter
tus
n" with the
er point, se
nt values of
the time of
on (poweron
o be deleted
K
M card
erent SMS
. *100#, *10
using *100#
its factory s
on is kept p
o green afte
ant here).
a restart.
guration se
[24]
ge (Fence V
otification.
, too much
as caused th
ry must the
">" arrow d
e 9.1. The c
the system
f the status
n/poweroff,
d manually (
01#, etc.)
#
settings at a
ressed unti
er flashing 2
ettings mad
Voltage) has
plant cover
he SMS noti
en be charge
described in
cause of the
m battery, su
request.
see point 6.
(without sw
any
l the
20 times
de up to now
s triggered t
r) must now
fication, thi
ed or chang
n point 9.3.
e alarm can
upply volta
1/6.2) autom
witching the
w and these
the SMS no
w be investig
is is marked
ged.
be detecte
age and fenc
matically res
e outputs of
e must be e
tification. T
gated and
d with the "
ed in this wa
ce voltage i
set the alarm
ff/on) by SM
entered
The
‐>"
ay.
is
m
MS.
[25]
9.7 Technical data:
Connection A: Voltage: 6 ‐ 14 VDC Power depending on source of supply: Mains adapter: max. 800 mA Dry battery: v max. 45 mA 12V rechargeable battery: max. 1.6 A This connection (4‐pole flat plug) is configured as a switching output in its factory setting. Connection B: Power rating of the relay contact (switch socket) Voltage: 250 VAC Non‐inductive power: max. 8 A Inductive power: max. 2 A The relay output is a voltage‐free changeover switch contact. For load, see above. GSM ALARM Power consumption: 5 mA (maximum of 17 mA when charging the system battery) Protection rating: IP64
9.8 Service addresses:
SERVICE Germany: AKO‐Agrartechnik GmbH & Co.KG (warrantor) Karl‐Maybach‐Str. 4 D‐88239 Wangen‐Schauwies GERMANY Phone: +49 7520 9660 0
[26]
10 Command overview
3.1 3.2
Configuring the telephone no. with or without SMS message
No. 1st parameter Telephone no.
2nd parameter SMS message yes or no
3rd parameter delay
SMS command
Examples
11 in accordance
with customer
y or n in minutes 0‐60
addnumber: addnumber:00497520966055,y,15
2 addnumber:00497520966056,y,30
3 addnumber:00497520966057,y,0
4 addnumber:00497520966058,n,0
5 addnumber:00497520966059,y,54
Answer: Phone no. in accordance with customer added
3.3
Also deleting the telephone number
Which Telephone no.
SMS command Examples Answer
Separate no.
in accordance with customer
delnumber: delnumber:00497520966055 Phone No 00497520966055 deleted
All nos. delallnumber: delallnumber: Security numbers memory erased
4 Setting ALARM thresholds
Which V Factory
setting2
Possible range
SMS command
Examples Answer
Fence voltage 3.0 kV 2.5 kV ‐ 8.0 kV
fencealarm: fencealarm:4.5 the command fencealarm:4.5 accepted
Supply
voltage3
Electric fence device
9 V 6.0 V 6.0 V ‐ 9.0 V
mbalarm: mbalarm:7.0 the command mbalarm:7.0 accepted
12V 12.3 V 11.5V ‐ 12.3V
mbalarm:11.9 the command fencealarm:11.9 accepted
3.6V not adjustable
5 Configuring connections A and B
Which connection
Which function
Supply voltage Note SMS command Example of dcoutfunc:al answer 230 V 12 V 9 V
A DCout
None X X X only 1 function possible
dcoutfunc:no the relfunc:al command accepted Switching
4 X X X dcoutfunc:sw
Alarm X X X dcoutfunc:al
B Rel
None5 X X only 1 function
possible relfunc:no
Switching X X relfunc:sw
Alarm X X relfunc:al
1 = Administrator 2 = Factory setting fence voltage, supply voltages 3 = The factory setting of the alarm threshold is adjusted to the corresponding supply voltage
In 230 V operation, the mains adapter reduces the supply voltage from 230 V to 12 V 4 = Factory setting Dcout (A) 5 = Factory setting Rel (B)
[27]
6.1 6.2
Switching GSM ALARM on/off6
Action How: SMS command
Answer
ON SMS poweron poweron OK
Calling ‐ in accordance with point 7.3
OFF SMS poweroff poweroff OK
Calling ‐ in accordance with point 7.3
7.1 7.2
Enabling or blocking of "Switch on/off by call" mode
Action SMS command Answer
Enabling switchbycall:00497520966055,y the command switchbycall:00497520966055,y,accepted
Blocking switchbycall:00497520966055,n the command switchbycall:00497520966055,n,accepted
7.3 Acknowledgement method for call
Which Done as for the acknowledgement SMS command
Answer
Tone7 When switching on
answer:ton the command answer:ton accepted
When switching off
Call‐back
Call‐back of the GSM alarm for 10‐20 sec.
answer:recall the command answer:recall accepted
8 Device name
Which Description SMS command
Example Answer
Factory setting AKO GSM alarm ‐ ‐
Change Flower8 name: name:Flower Name changed to Flower
.* = Max. 16 characters (incl. spaces) can be used for the device names
9.4 Resetting the alarm status
How SMS command
Answer
Alarmreset alarmreset alarmreset OK
Switching on, see point 6.1.1 poweron poweron OK
Switching off, see point 6.2.1 poweroff poweroff OK
9.5 Querying credit on the SIM card
How SMS command
Example Answer
Depending on mobile communication provider credit: credit:*100# Depending on mobile communication provider
credit:*101#
6 = With instances 3,4,5 and 6, the electric fence device is also switched on/off 7 = Factory setting for acknowledge method 8 = Max. 16 characters (incl. spaces) can be used for the device names.
[28]
11 Scope of delivery
Article no. Description Image Device version
441022‐0
441022‐230
441022‐12
441022‐9
441022 GSM ALARM
X X X X
371018 Mains adapter for GSM alarm
X
371019 12 volt cable for GSM alarm
X
371020 9 V cable for GSM alarm
X
E264335 Earth spike
X X X X
E203925 Heart clip
X X X X
E268218 Rechargeable battery (system battery)
X X X X
BA‐1135 Operating instructions
X X X X
441030 230 V on/off switching adapter
can be ordered separately for 441022‐230