9
480W High Intensity LED Light - 60,000 Lumens - 347-480V AC - High Mast Lighting - Pole Top Mount GAU-PT-500LTL-LED-480V GAU-PT-500LTL-LED-480V High Mast LED Light Quick Summary Lamp Type: CREE® LED 1000 Watt Metal Halide Replacement Dimensions: 22.92"-L x 14.51"-W x 5.153"-D Ambient Op Temp -40C to +80C Weight: 32.35 Lbs Ideal for Light Towers & LED Retrofits Total Watts: 500 98% Transmission High Purity PMMA Optics Total Lumens: 67,500 Multiple LED Banks for Heat Dispersion Luminous Efficiency: 135 lm/w 135 Lumens Per Watt Efficiency Beam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood 70% Lumen Retention after 80,000 Hours LED Color Temperature: Cool White - 5500-6500K NRTL Certified to UL1012 Compliant LED Life Expectancy: 80,000 hours NRTL Certified to UL60950-1 Compliant Optics Efficiency: 98% - PMMA High Transmittance Optics CE Certified Led Drive %: 90% RoHS Compliant Voltage: 347-480V AC IP67 Rated Waterproof Amp Draw: 1.4A @ 347V, 1A @ 480V Wiring: 2.5` Pigtail w/ Flying Leads Mounting: Pole Top Slip Fit Special Orders- Requirements Pole Diameter Options: 1.5", 2", 2.125", 2.25", 2.375", 2.5", 2.75", 3" or 4"x4" Contact us for special requirements Materials: Die Cast Aluminum Housing, PMMA Optics Phone: 1-214-616-6180 Housing Color: Natural Aluminum Toll Free: 1-800-369-6671 Ambient Temperature Range: -40°C to +80°C Fax: 1-903-498-3364 Waterproof Rating: IP67 E-mail: [email protected] The GAU-PT-500LTL-LED-480V High Mast LED Flood Light offers intense light output from elevated positions, when mounted on top of a pole. Producing 67,500 lumens, a 1 amp draw at 480V, 80,000 hour service life, 347-480V AC compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions. The GAU-PT-500LTL-LED-480V LED light from Larson Electronics produces 67,500 lumens of high intensity light while drawing only 480 watts at 1 amps from a 480 volt electrical system. Forty-Eight CREE® high output LEDs producing 1,406 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high 1 Larson Electronics LLC 9419 E US HWY 175, Kemp, TX 75143 Phone: 800.369.6671 www.LarsonElectronics.com Email: [email protected] Fax: 903.498.3364

480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

480W High Intensity LED Light - 60,000 Lumens - 347-480V AC - High Mast Lighting - Pole Top

MountGAU-PT-500LTL-LED-480V

GAU-PT-500LTL-LED-480V High Mast LED Light Quick Summary

Lamp Type: CREE® LED 1000 Watt Metal Halide ReplacementDimensions: 22.92"-L x 14.51"-W x 5.153"-D Ambient Op Temp -40C to +80CWeight: 32.35 Lbs Ideal for Light Towers & LED RetrofitsTotal Watts: 500 98% Transmission High Purity PMMA OpticsTotal Lumens: 67,500 Multiple LED Banks for Heat DispersionLuminous Efficiency: 135 lm/w 135 Lumens Per Watt EfficiencyBeam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90°Wide Flood

70% Lumen Retention after 80,000 Hours

LED Color Temperature: Cool White - 5500-6500K NRTL Certified to UL1012 CompliantLED Life Expectancy: 80,000 hours NRTL Certified to UL60950-1 CompliantOptics Efficiency: 98% - PMMA High Transmittance Optics CE CertifiedLed Drive %: 90% RoHS CompliantVoltage: 347-480V AC IP67 Rated WaterproofAmp Draw: 1.4A @ 347V, 1A @ 480VWiring: 2.5` Pigtail w/ Flying Leads

Mounting: Pole Top Slip Fit Special Orders- Requirements

Pole Diameter Options: 1.5", 2", 2.125", 2.25", 2.375", 2.5", 2.75", 3" or 4"x4" Contact us for special requirements

Materials: Die Cast Aluminum Housing, PMMA Optics Phone: 1-214-616-6180

Housing Color: Natural Aluminum Toll Free: 1-800-369-6671

Ambient Temperature Range: -40°C to +80°C Fax: 1-903-498-3364

Waterproof Rating: IP67 E-mail: [email protected]

The GAU-PT-500LTL-LED-480V High Mast LED Flood Light offers intenselight output from elevated positions, when mounted on top of a pole.Producing 67,500 lumens, a 1 amp draw at 480V, 80,000 hour service life,347-480V AC compatibility, and IP67 waterproof rating, this LED floodlight provides operators with a rugged and powerful LED alternative to1000 watt metal halide lamps that uses little power and can withstandrugged use and abusive conditions.The GAU-PT-500LTL-LED-480V LED light from Larson Electronics produces 67,500lumens of high intensity light while drawing only 480 watts at 1 amps from a 480volt electrical system. Forty-Eight CREE® high output LEDs producing 1,406lumens each are arranged in rows and paired with PMMA high purity optics toproduce a well focused 24° wide spot beam that is ideal for providing far reachingconcentrated illumination while still covering a substantial amount of area. Wealso offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wideflood beam spreads. The spot beams are tightly focused and are designed for high

1

Larson Electronics LLC9419 E US HWY 175, Kemp, TX 75143Phone: 800.369.6671

www.LarsonElectronics.comEmail: [email protected]

Fax: 903.498.3364

Page 2: 480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

elevation mounting to achieve distance, making spot versions ideal for high mastand spots lighting. The flood beams are designed to provide more light over alarger area nearer the fixture, making flood versions ideal for use as dedicatedwork and area lights.GAU-PT-500LTL-LED-480V lights are ideal replacements for fragile and hotrunning 1000 watt metal halide lamps. They offer low power requirements, highdurability and a versatile mounting system that makes these LED light emitters asuperior lighting solution for demanding applications where power and reliability iscritical. The heavy duty design and high power of these LED lights also makesthem suitable for a wide array of applications including but not limited to: highmast lighting, light towers, light plant LED retrofits, military, mining, industrialmanufacturing, machine visioning, security and law enforcement, commercialstructure illumination, sport complexes, billboards, race tracks, and parking lots toname a few.

Click Photo to Enlarge

The above image shows the comparison of the traditional (4) 1500 watt metal halides light fixturesmounted to a 30` light tower (left) to (4) GAU-PT-500LTL-LED-480V 500 watt LED light fixtures mountedto a 30` light tower. The area being illuminated by each tower is 300` in length and 250` in width. Unlikethe metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED lightfixture provides an even beam spread over the targeted work area without overcast, glare, light spillage,and wasted illumination. Color rendering is also increased with LED light plants, providing a more realisticnight vision that more closely resembles natural daylight illumination.

Heat Management: Heat is the single largest factor in premature LED failureand color shifting. These LED units feature individual heat sinks per bank of sixLEDs to control heat buildup rather than utilizing a single housing to dissipateheat. This allows for more thorough cooling of the LEDs for extended operatingperiods. This allows the LEDs to be driven at up to 90% capacity withoutoverheating or visible loss of light output. The end result is more light with lessheat and longer LED life with an average 70% lumen maintenance after 80,000hours.Durability: As well as unparalleled heat control, the GAU-PT-500LTL-LED-480Vseries of LED lights from Larson Electronics also offer IP67 rated construction thatis designed to withstand extremes of environmental and operating conditions.These units can withstand rapid temperature changes of -40° Celsius to +80°Celsius, are waterproof, and resist ingress of dust, dirt and humidity. Thehousings are formed from die cast aluminum and the optics are high transmissionPMMA with 98% light transmittance. The CREE® LEDs help these units achieveresistance to vibrations and are rated at 70% lumen maintenance after 80,0000hours of use. We recommend these LED lights for use in applications where a lotof vibration, dust, dirt, dampness and abusive working conditions areencountered.Mounting: The pole top slip fit mount LED light features an adjustable swivelbracket constructed of 3/8" aluminum that allows over 270° of adjustment and isattached to a slip fit yoke for easy installation. The slip fit yoke is built tocustomer`s specs, enabling operators to mount this LED light to their specificpole size. For example, selecting a 2" OD mount means that the yoke mount willfit onto pipes or bull horns with a 2" OD. The entire selection of outside diameters

2

Larson Electronics LLC9419 E US HWY 175, Kemp, TX 75143Phone: 800.369.6671

www.LarsonElectronics.comEmail: [email protected]

Fax: 903.498.3364

Page 3: 480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

is listed below in the specifications section.Applications: Pole lighting, tower lighting, wide-area illumination, elevatedillumination, outdoor locations, industrial sites and more.At Larson Electronics, we do more than meet your lighting needs. We alsoprovide replacement, retrofit, and upgrade parts as well as industrial grade poweraccessories. Our craftsmen can custom build any lighting system and/oraccessories to fit the unique demands of your operation. A commitment tohonesty, quality, and dependability has made Larson Electronics a leader in thelighting and electronics business since 1973. Contact us today at 800-369-6671or message [email protected] for more information about our customoptions tailored to meet your specific industry needs.

 

3

Larson Electronics LLC9419 E US HWY 175, Kemp, TX 75143Phone: 800.369.6671

www.LarsonElectronics.comEmail: [email protected]

Fax: 903.498.3364

Page 4: 480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

4

Larson Electronics LLC9419 E US HWY 175, Kemp, TX 75143Phone: 800.369.6671

www.LarsonElectronics.comEmail: [email protected]

Fax: 903.498.3364

Page 5: 480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

5

Larson Electronics LLC9419 E US HWY 175, Kemp, TX 75143Phone: 800.369.6671

www.LarsonElectronics.comEmail: [email protected]

Fax: 903.498.3364

Page 6: 480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

6

Larson Electronics LLC9419 E US HWY 175, Kemp, TX 75143Phone: 800.369.6671

www.LarsonElectronics.comEmail: [email protected]

Fax: 903.498.3364

Page 7: 480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

7

Larson Electronics LLC9419 E US HWY 175, Kemp, TX 75143Phone: 800.369.6671

www.LarsonElectronics.comEmail: [email protected]

Fax: 903.498.3364

Page 8: 480W High Intensity LED Light - 60,000 Lumens - 347-480V ... · larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-PT-500LTL-LED-480V

Options:GAU-PT-500LTL-LED-480V-Beam Config-Pole OD

Example: GAU-PT-500LTL-LED-480V-10SP-1.5in

Beam Config10° SPOT -10SP24° WIDE SPOT -24WS38° NARROWFLOOD

-38NF

60° FLOOD -60F90° WIDEFLOOD

-90WF

Pole OD1.5 -1.5in2 -2in2 1/8 -2.125in2 1/4 -2.25in2 3/8 -2.375in2 1/2 -2.5in2 3/4 -2.75in3 -3in4X4 -4x4

8

Larson Electronics LLC9419 E US HWY 175, Kemp, TX 75143Phone: 800.369.6671

www.LarsonElectronics.comEmail: [email protected]

Fax: 903.498.3364