Upload
paijo-tejo
View
221
Download
0
Embed Size (px)
Citation preview
8/13/2019 4.Petro
1/14
PETROLEUM & OILFIELD HOSE
8/13/2019 4.Petro
2/14
Petroleum Hoses are divided into:
Fuel Dispensing for diesel, gasoline, and heating oil
Tank Truck suction & discharge hoses
Oil Field Specialty hoses such as BOP, Kelly
G603 PREMIUM FARM TANK
Tube: Black nitrile/pvc rubber specially compounded to handleunleaded and leaded fuels with up to 50% aromatic content.
Reinforcement: Two spirals of polyester yarn plus built-instatic wire.
Cover: Smooth, black, oil, weather, and abrasion resist-ant nitrile/pvc rubber compound.
Temperature Range: -30C(-22F) to 70C (158F)
PREMIUM FARM TANK ASSEMBLIES
Internal spring guards in each end of all 34" and 1" hosesprevent kinking next to the fittings
G603
G603 Assembly
Part Working Weight PRICE PER FOOT Standard
I.D. Number O.D. Pressure per ft Cut 50 ft Coil Reel Length
3/4" G603-075 1.06" 75 psi 0.34 lb $ 1.90 $ 1.80 $ 1.70 50' Coil or 600' Reel
1 G603-100 1.38 75 0.44 2.90 2.70 2.55 50' Coil or 600' Reel
11/4 G603-125 1.63 75 0.68 5.00 4.80 4.70 50' Coil or 600' Reel
Hose NPT Part Weight PRICE
size size Length Number Each EACH
3/4" 3/4" 10 ft G603-075MM10 3.7 lb $ 33.30 12 G603-075MM12 3.8 36.90 15 G603-075MM15 5.4 42.85 20 G603-075MM20 7.1 52.50
1 1 10 G603-100MM10 4.8 47.70
15 G603-100MM15 7.0 60.25
20 G603-100MM20 9.2 72.80
11/4 11/4 10 G603-125MM10 7.9 77.60
15 G603-125MM15 11.3 101.20
Premium Farm Tank is commonly used for dispensing gaso-
line or diesel from drums, skid tanks and storage tanks usinggravity feed or low pressure pumps. G603 is also excellentfor lubricating and fuel oils. G603 is rated for diesel fuelswith up to 20% biodiesel content.
Since farm tank is most often sold in short lengths coupledwith male pipe fittings, we offer these assemblies alreadymade up. Our3/4" and 1" farm tank hoses feature brassplated zinc fittings attached with crimped aluminum fer-rules. The 11/4" hoses have aluminum ends attached withband clamps.
FUEL DISPENSING HOSE
Gasoline & diesel hose forfuel line & filler necks canbe found in Automotive andMarine Sections
8/13/2019 4.Petro
3/14
FUEL DISPENSING HOSE
CURB PUMP ASSEMBLIES
Commonly requested curb pump assemblies are listed below.Male pipe ends are chrome plated brass. Hoses are suppliedwith a solid, permanently installed fitting on one end anda live swivel, reusable fitting on the other end.
Whip hoses have solid male fittings at both ends for
installation between the dispenser pump and the safetybreakaway coupling.
Assemblies with Live Male by Solid Male Fittings:
Hose size NPT size Length Part Number Weight Each PRICE EACH
3/4" 3/4" 10.5 ft G621-075MLM10.5 4.9 lb $ 98.40
12 G621-075MLM12 5.6 108.30
13 G621-075MLM13 5.7 114.00
15 G621-075MLM15 6.4 125.20
17 G621-075MLM17 6.9 138.80
25 G621-075MLM25 10.0 187.60
1 1 15 G621-100MLM15 9.0 229.00
1 1 17 G621-100MLM17 10.1 245.70
20 G621-100MLM20 11.6 275.60
25 G621-100MLM25 14.2 323.30
Whip Hoses:3/4" 3/4" 9 in G621-075WHIP 1.5 42.20
G621 Assembly
G621 HARDWALL CURB PUMP
Tube: Smooth, black, gasoline and oil resistant nitrilerubber.
Reinforcement: High-tensile steel wire, tightlybraided for maximum flexibility.
Cover: Smooth, black, oil, abrasion, andweather resistant rubber.
Temperature Range: -40C (-40F) to 60C(140F)
G621
Hardwall Curb Pump is used for dispensing most types offuel from service station pumps. Compatible fuels includeunleaded gasolines, diesel, and white gas. The wire braidreinforcement provides the hose with excellent kink andcrush resistance and also dissipates static electricity.
Part Working Weight PRICE PER FOOT Approx.
I.D. Number O.D. Pressure per ft Cut Reel Reel Length
Standard Black Cover3/4" G621-075 1.13" 150 psi 0.37 lb $ 6.20 $ 5.60 500 ft
1 G621-100 1.50 150 0.52 9.40 8.50 400Yellow Cover
3/4" G621Y-075 1.13" 150 0.37 7.40 6.70 500
8/13/2019 4.Petro
4/14
8/13/2019 4.Petro
5/14
Part Working Weight PRICE PER FOOT Approx.
I.D. Number O.D. Pressure per ft Cut 50 ft Reel Reel Length
3/8" G626-038 0.75" 300 psi 0.21 lb $ 7.90 $ 7.40 700 ft1/2 G626-050 0.94 300 0.30 10.00 9.20 7003/4 G626-075 1.13 225 0.39 11.10 $ 10.80 10.50 700
1 G626-100 1.50 300 0.49 13.90 13.50 13.20 600
11/4 G626-125 1.78 300 0.61 19.00 18.40 300
11/2 G626-150 2.09 300 0.83 24.60 24.00 300
G626...POLAR FUEL & MULTI-PURPOSE HOSE
Tube: Smooth, black, gasoline and oil resistant syntheticrubber
Reinforcement: Spiral layers of polyester cord. 3/4"and largesizes have a static wire.
Cover: Smooth, blue, oil resistant rubber
Temperature Range: -55C (-67F) to 80C (176F)
G626
G626 Assembly
FUEL DISPENSING HOSE
G626 AssembliesHose size NPT size Length Part Number Weight Each PRICE EACH
3/4" 3/4 10.5 ft G626-075MLM10.5 5.1 lb $ 160.25
12 G626-075MLM12 5.7 177.60
15 G626-075MLM15 6.8 213.40
20 G626-075MLM20 8.8 271.00
25 G626-075MLM25 10.7 329.70
1 1 15 G626-100MLM15 8.4 307.50
20 G626-100MLM20 10.4 381.20
25 G626-100MLM25 13.2 453.90
30 G626-100MLM30 15.7 527.60
This blue, smooth cover hose is ideal for a wide variety ofapplications in the coldest of climates. G626 maintains flex-ibility down to -55C (-67F) and can be used for gasoline,fuel oil, kerosene, air, and many chemicals.
Note: When installing couplings on fuel fill hoses, the anti-static wire should be exposed and folded into the insideof the hose so that it comes into permanent contact withthe couplings. This should be confirmed with an electricalcontinuity check prior to service.
8/13/2019 4.Petro
6/14
PROPANE HOSE
G632 POLAR-FLEX PROPANE HOSE
Polar-Flex is designed to transfer liquefied propane andnatural gas. It meets Canadian Gas Association as well as
CAN/CGA-8.1-M86 Type 1 requirements. The low temperatureflexibility of this hose makes it ideally suited to the Canadian
climate.We supply this hose only in premade, factory tested
assemblies that conform to CSA requirements.
Tube:Nitrile rubber designed for low permeation.Reinforcement:Spirals of synthetic yarn.
Cover:Black, oil, abrasion, and flame resistant chlorinatedpolyethylene.
Temperature Range:-46C (-50F) to 82C (180F)
I.D. Part Number Length Fittings PRICE EACH38" G632-038SAE10 10 ft SAE female $ 66.2038 G632-038SAE15 15 SAE female 88.7038 G632-038SAE25 25 SAE female 133.8038 G632-038SAE50 50 SAE female 246.4038 G632-038SAE100 100 SAE female 471.6012 G632-050JIC2 2 JIC female 28.6012 G632-050JIC10 10 JIC female 77.0012 G632-050JIC15 15 JIC female 107.20
12 G632-050JIC25 25 JIC female 167.7012 G632-050JIC50 50 JIC female 318.8012 G632-050JIC75 75 JIC female 470.0012 G632-050JIC100 100 JIC female 621.2034 G632-075SAE12 12 SAE female 128.0034 G632-075SAE25 25 SAE female 227.3034 G632-075SAE50 50 SAE female 418.2034 G632-075SAE75 75 SAE female 609.1034 G632-075SAE100 100 SAE female 800.00
1 G632-100JIC10 10 JIC female 136.601 G632-100JIC25 25 JIC female 284.601 G632-100JIC50 50 JIC female 531.201 G632-100JIC75 75 JIC female 777.801 G632-100JIC100 100 JIC female 1024.40
1 G632-100NPT10 10 NPT Male 135.501 G632-100NPT25 25 NPT Male 283.401 G632-100NPT50 50 NPT Male 530.001 G632-100NPT100 100 NPT Male 1023.20
Part Working WeightI.D. Number O.D. Pressure per ft38" G632-038 0.69" 350 psi 0.16 lb12 G632-050 0.94 350 0.3034 G632-075 1.25 350 0.431 G632-100 1.50 350 0.58
8/13/2019 4.Petro
7/14
North Star Tank Truck is designed specifically for bulktransfer service, where ease of use is critical to the opera-tor. G643 is much more flexible than regular petroleumtransfer, particularly at sub zero temperatures. In northernclimates, G643 extends the season for regular tank truckhose, reducing the use of more expensive, specially for-mulated arctic hoses.Tube: Black, nitrile rubber, suitable for all grades of
gasoline and petroleum products with up to 50% aromaticcontent.
G643 NORTH STAR TANK TRUCK
Reinforcement: Heavy wire helix embedded between layers of synthetic textile cords.
Cover: Black, wrapped finish, oil, weather andabrasion resistant neoprene rubber.
Temperature Range: -40C (-40F) to 100C(212F).
G643
G643C
Part Working Vacuum Bend Weight PRICE PER FOOT Standard
I.D. Number O.D Pressure Rating Radius per ft Cut Std Length Length
3/4 G643-075 1.18 150 psi Full 4.5 0.39 lb $ 6.30 $ 5.40 100 ft
1 G643-100 1.42 150 Full 6 0.48 7.00 6.00 100
11/4 G643-125 1.69 150 Full 8 0.62 7.30 6.40 100
11/2 G643-150 1.97 150 Full 9 0.86 8.30 7.20 100
2 G643-200 2.50 150 Full 12 1.24 10.00 8.70 100
21/2 G643-250 2.95 150 Full 15 1.38 12.30 10.70 100
3 G643-300 3.57 150 Full 18 2.03 13.80 12.00 100
4 G643-400 4.57 150 Full 24 2.65 22.00 19.20 100
5 G643-500 5.79 150 Full 30 4.57 43.20 37.60 Multiples of 20 ft
6 G643-600 6.69 150 Full 36 5.30 49.40 42.90 Multiples of 20 ft
G643C NORTH STAR CORRUGATED TANK TRUCK
Tube: Black, nitrile rubber, suitable for all grades of gasolineand petroleum products with up to 50% aromatic content
Reinforcement: Heavy wire helix embedded between
layers of synthetic textile cords.Cover: Black, corrugated finish, oil, weather andabrasion resistant neoprene rubber.Temperature Range: -40C (-40F) to 100C(212F).
Part Working Vacuum Bend Weight PRICE PER FOOT Standard
I.D. Number O.D Pressure Rating Radius per ft Cut Std Length Length
2 G643C-200 2.50 150 psi Full 8 1.09 lb $ 12.80 $ 11.70 100 ft
3 G643C-300 3.57 150 Full 12 1.98 18.60 16.90 100
4 G643C-400 4.57 150 Full 16 2.62 27.80 25.40 100
6 G643C-600 6.69 150 Full 24 4.96 66.00 57.90 100
TANK TRUCK HOSE
Corrugated tank truck offers the same features as regularNorth Star, but the corrugated cover style allows for greaterflexibility. In applications where the hose is regularlymoved, or connected and disconnected, less force is re-quired to bend this hose, making it easier to handle.
8/13/2019 4.Petro
8/14
Part Working Vacuum Bend Weight PRICE PER FOOT StandardI.D. Number O.D. Pressure Rating Radius per ft Cut Std Length Length
11/2" G642L-150 2.06" 150 psi Full 3.0" 0.80 lb $20.30 18.70 100 ft2 G642L-200 2.56 150 Full 4.0 1.20 20.80 19.20 100
3 G642L-300 3.56 150 Full 5.5 1.80 31.10 28.30 100
4 G642L-400 4.63 150 Full 7.5 2.60 45.40 41.20 100
G642L
G642L ARCTIC NORTHERN-LITE
Tube: Black, nitrile/hydrin rubber, suitable for generalpetroleum products.
Reinforcement: High-tensile, steel dual-wirehelix embedded between textile cords.
Cover: Flat corrugated, black, oil, abrasion,and weather resistant nitrile rubber with bluestripe.
Temperature Range: -55C (-67F) to 80C(176F)
G643L POLAR TANK TRUCK
Tube: Smooth, black, oil resistant synthetic rubber.
Reinforcement: High-tensile steel wire helix embeddedbetween textile cords.
Cover: Corrugated, black, oil, weather, abrasionand ozone resistant synthetic rubber.
Temperature Range: -55C (67F) to 82C(180F) for products up to 30% aromatic con-tent.
-55C (-67F) to 70C (158F) for products upto 50% aromatic content.
Part Working Vacuum Bend Weight PRICE PER FOOT Standard
I.D. Number O.D. Pressure Rating Radius per ft Cut Std Length Length
2" G643L-200 2.65" 150 psi Full 5.0" 1.07 lb $ 20.10 $ 18.20 100 ft
3 G643L-300 3.65 150 Full 7.5 1.64 26.80 24.40 100
4 G643L-400 4.75 150 Full 10.0 2.28 36.90 33.50 100
G643L
TANK TRUCK HOSE
Northern-Lite is a multi-purpose petroleum suction anddischarge hose designed to be used at extremely low tem-peratures. The unusual square corrugation makes this hoseflexible and lightweight enough to be used as a drop hose.The full vacuum and 150 psi pressure rating also make it agood performer for general transfer service. Northern-Lite isused for cold weather applications such as oil field service,loading and unloading tank trucks and rail cars.
Polar Tank Truck is designed for year round use in environ-ments where standard hoses become too stiff during winteruse. G643L offers improved flexibility at extremely low Polartemperatures, making this hose a popular choice of tanktruck operators. The combined capability to handle pres-
sure or full suction applications also makes G643L an idealchoice for all-purpose petroleum suction and discharge,oilfield service or as a fuel delivery drop hose.
8/13/2019 4.Petro
9/14
G1641C URETHANE DROP HOSE
Tube: Clear polyurethane, suitable for gasoline and petroleumproducts with up to 50% aromatic content.
Reinforcement: Polyester fabric reinforcing with embeddedcopper static wire for positive grounding, and a green spiraPVC helix.
Cover: Clear or black urethane cover with distinctive green helix
Temperature Range: -40C (-40F) to 65C (150F).
Working BendPart Pressure Radius Weight PRICE PER FOOT Standard
I.D. Number O.D at 20C at 20C per ft Cut Std Length Length
Clear with Green Helix:
3" G1641C-300 3.78" 65 psi 6" 1.20 lb $ 34.40 $ 31.30 100 ft
4 G1641C-400 4.82 65 8 1.70 45.70 41.50 100
Black with Green Helix:
4 G1641BC-400 4.82 65 8 1.70 45.70 41.50 100
G1641C G1641BC
G1640C
G1600BC
TANK TRUCK HOSE
Working BendPart Pressure Radius Weight PRICE PER FOOT Standard
I.D. Number O.D at 20C at 20C per ft Cut Std Length Length
2" G1640C-200 17 psi 3.0" 0.51 lb $ 12.20 $ 11.00 100 ft
3 G1640C-300 11 3.5 0.78 19.10 17.30 100
3 G1640CR-300* 11 3.5 0.78 17.00 15.50 100
4 G1640C-400 9 4.5 1.10 28.50 25.70 100
*Right hand spiral
BANDING COILSWhen attaching couplings to corrugated hoses, bandingcoils make band application easier and neater by creatinga smooth surface for clamping. One banding coil can becut in half to provide enough coil to couple both ends ofa hose. The coil is threaded onto the hose helix at eachend prior to fitting installation. Clamps are then appliedover the coil and helix.Grounding: Any hose being used to transfer gasoline orgasoline vapors must be bonded to ground to preventthe risk of static build-up. Assemblers must be trained tocorrectly bond the copper static wire to the metal fittingsand test the conductivity. Instructions are available uponrequest.
Fits Part Weight
Hose I.D. Number Color Each PRICE EACH
2" G1600BC-200 Clear 0.34 lb $15.50
3 G1600BC-300 Clear 0.51 16.50
4 G1600BC-400 Clear 0.72 21.50
G1640C URETHANE VAPOR RECOVERY HOSE
Construction: Clear polyurethane tube suitable for gasoline andpetroleum products and vapors, supported by a yellow spiral PVChelix with embedded copper static wire for grounding.
Temperature Range: -40C (40F) to 65C (150F)
G1641C is different from other PVC gasoline drop hosescurrently found in the market. It has a unique polyurethanetube that combines the advantages of good chemicalresistance, light weight, and low temperature flexibility.G1641C is now green to signify that it is suitable for usewith ethanol (up to E98) and biodiesel fuels that conformto ASTM D6751 (up to B100). This product comes com-plete with a static wire to ensure positive grounding whenproperly coupled.
Vapor recovery hoses are used on fuel delivery tankersto reduce hydrocarbon emissions at service stations andbulk terminals. G1640C has the same Bio Fuel approvalsas G1641C, and the same added benefits that come froma urethane hose; it is lightweight, flexible in sub-zeroweather, and abrasion resistant for long service life.
Bio FuelApproved
8/13/2019 4.Petro
10/14
TANK TRUCK HOSE
G2641 COMPOSITE PETROLEUM HOSE
Construction:Layers of polypropylene fabrics and sealing filmswith galvanized steel inner and outer wires. G2641 is suitablefor tank truck loading and discharge of petroleum products attemperatures up to 100C (212F).
Temperature Range:-40C (-40F) to 100C (212F).
Note: Working pressure is reduced at higher temperatures.Please consult us regarding use at elevated tem-
peratures with specific fluids.Pressure Test Charge: Extra at $50.00 net percustom hose assembly for hydrostatic prooftest, stamping serial number on hose andproviding test certificate.
Assemblies:We offer popular pre-made as-semblies from stock. Prices for these assem-
blies include testing.
G2641
PAS POLYESTER ABRASION SLEEVE
WorkingStandard Part Pressure Vacuum Bend Weight PRICE
I.D. Number at 20C Rating Radius per ft PER FOOT Length
3" G2641-300 200 psi Full 11.0" 2.0 lb $ 27.10 100 ft
4 G2641-400 200 Full 15.5 3.5 41.20 1004 G2641Y-400 200 Full 15.5 3.5 41.20 100
Assemblies with Male NPT FittingsHose NPT Part Weight P R I C ESize Size Length Number Each EACH
4" 4 10 ft G2641-400MM10 38 lb $ 729.00
11 G2641-400MM11 42 770.20
12 G2641-400MM12 44 811.40
13 G2641-400MM13 47 852.60
14 G2641-400MM14 49 893.80
We can supply composite hoses with a polyester sleevejacket to provide extra wear resistance. The jacket is fixedat each fitting using punch clamps. The fabric is 1200 x1200 denier polyester woven 24 threads per inch with awaterproof PVC backing. Custom sizes are available up to
18 diameter.
Part Weight PRICE StandardI.D. Number Description per ft PER FOOT Length
4 1/2" PAS-450 Fits 3" composite hose 0.13 lb $ 10.50 150 ft
5 1/2" PAS-550 Fits 4" composite hose 0.15 11.80 150
In 4" size we also stock G2641 withyellow cover. Specify: G2641Y-400
Note: For more complete information about the care andhandling of composite hoses, see the beginning of theChemical Transfer section of this catalog
8/13/2019 4.Petro
11/14
8/13/2019 4.Petro
12/14
Part Working Weight Approx.
I.D. Number O.D. Pressure per ft PRICE PER FOOT Reel Length
3/8" G653-038 1.11" 3000 psi 0.76 lb $ 18.10 500 ft
1/2 G653-050 1.19 3000 0.82 19.90 500
3/4 G653-075 1.49 3000 1.23 25.20 500
1 G653-100 1.84 3000 1.74 35.90 500
On an oil drilling rig, the blow-out preventer (BOP) is avalve system at the wellhead that can be activated quicklyto close the space around the drill, or even completely closean open drill hole. There are multiple BOP valves used oneach rig, and the valves are controlled hydraulically. Whenexcessive pressure in the hole causes a "kick", the BOP isused to prevent a blow-out. Hoses that connect the BOPto the hydraulic system are required to have thick, flame
resistant covers that allow them to survive in the case ofa fire, so that the BOP still functions.
G653
Hose AssembliesI.D. NPT Thread Length Part Number PRICE EACH
3/8" 3/8" 15 ft G653-038MM15 $ 325.10
20 G653-038MM20 415.60
25 G653-038MM25 506.10
30 G653-038MM30 596.60
35 G653-038MM35 687.10
1/2 1/2 15 G653-050MM15 360.10
20 G653-050MM20 459.60
25 G653-050MM25 559.10
30 G653-050MM30 658.60
35 G653-050MM35 758.10
3/4 3/4 15 G653-075MM15 447.00
20 G653-075MM20 573.00
25 G653-075MM25 699.00
30 G653-075MM30 825.00
35 G653-075MM35 924.00
1 1 15 G653-100MM15 666.50
20 G653-100MM20 846.00
25 G653-100MM25 1,025.50
30 G653-100MM30 1,205.00
35 G653-100MM35 1,384.50
G653 3000 psi BLOWOUT PREVENTER
Tube: Smooth, black, oil resistant nitrile rubber.
Reinforcement: Two braids of high tensile steel wire.
Cover: Red, thick, fire resistant neoprene rubber composite withwrapped finish.
Temperature Range:-40C (-40F) to 120C (248F). Testedaccording to Lloyds Register requirements to withstand 700C
(1292F) for more than 5 minutes at full working pressure.Couplings: Use PULSAR 5016 male NPT crimp fittings with 5904skive ferrules. Contact your sales representative for currentcrimp specifications. Couplings must then be covered with flameresistant sleeve and BOP over-ferrules.
Pressure Test Charge: Extra at $60.00 net per hose assemblyfor hydrostatic proof test, stamping serial number on hose andproviding test certificate
OIL FIELD HOSE
8/13/2019 4.Petro
13/14
Green Line G663 Kelly Hose is rated to 3600 psi with a full 4:1 safety factor. G663is manufactured in long lengths of up to 164 ft to minimize remnants when longassemblies are required.
G663 3600 psi KELLY HOSE
Tube: Smooth, black, oil resistant synthetic rubber.
Reinforcement: Four layers of high tensile steel spiral wire.
Cover: Black, ozone and weather resistant synthetic rubberwith superior abrasion resistance.
Temperature Range:-40C (-40F) to 120C (248F).
Couplings: Use PULSAR 6516API non-skive or 8600 series skivecrimp fittings. Contact your sales representative for currentcrimp specification.
Pressure Test Charge: Extra at $60.00 net per hose assemblyfor hydrostatic proof test, stamping serial number on hose andproviding test certificate
Part Working Bend Weight PRICE PER FOOT Standard
I.D. Number O.D. Pressure Radius per ft Cut Std Length Length
2 G663-200 2.68 3600 psi 28 3.08 lb $ 30.30 $ 28.10 164 ft
G663
G663 AssembliesHose NPT Weight PRICEsize size Length Part Number Each EACH
2 2 15 ft G663-200MM15 51 lb $ 806.0020 G663-200MM20 66 957.00
25 G663-200MM25 82 1,109.00
30 G633-200MM30 97 1,260.00
Part Working Bend Weight PRICE PER FOOT Standard
I.D. Number O.D. Pressure Radius per ft Cut Std Length Length
3 G662-300 3.94 2400 psi 37 4.50 lb $ 77.60 $ 75.30 100 or 131 ft
G662 AssembliesHose NPT Weight PRICEsize size Length Part Number Each EACH
3 3 6 ft G662-300MM6 37 lb $ 1,696.20
11 G662-300MM11 60 2,083.10
15 G662-300MM15 78 2,394.10
20 G662-300MM20 100 2,781.00
30 G662-300MM30 145 3,555.80
G662
G662-300 is reinforced with four layers of wire braid to provide a burst pres-sure of over 6000 psi. This allows a pressure rating of 2400 psi with a 2-1/2:1safety factor, or 1500 psi where a 4:1 safety factor is required (in hydraulicservice, for example).
G662-300 2400 psi KELLY HOSE
Tube: Smooth, black, oil resistant synthetic rubber.
Reinforcement: Four braids of high tensile steel wire.Cover: Black, ozone and weather resistant synthetic rubbewith orange stripe.
Temperature Range: -40C (-40F) to 93C (200F).
Couplings: Factory installed G71H male NPT inserts with G74Hswage ferrules
Pressure Test Charge: Extra at $60.00 net per hose assemblyfor hydrostatic proof test, stamping serial number on hose andproviding test certificate
OIL FIELD HOSE
8/13/2019 4.Petro
14/14
G116 RECORDER HOSE
Tube: Polyamide (Nylon)
Reinforcement: Two spiral layers of wire and one wirebraid
Cover: Black polyurethane
Fittings: Factory installed and tested male NPT
Temperature Range: -40C (-40F) to 100C(212F)
Pressure Test Charge: Extra at $60.00 net per hose
assembly for hydrostatic proof test, stamping serialnumber on hose and providing test certificate.
Part Working Bend Weight
I.D. Number O.D. Pressure Radius per ft
1/4 G116-04 0.54 16400 psi 3.5 0.19 lb
G116 Assemblies
Hose NPT Assembly Part Weight Price
Size Size Length Number Each Each1/4 1/4 50 ft G116-04MM50 9.8 lb $ 1,022.00 75 G116-04MM75 14.5 1,421.00
100 G116-04MM100 19.8 1,821.00
G116
G665
OIL FIELD HOSE
G665 5000 psi KELLY HOSE
Tube: Smooth, black, oil resistant synthetic rubber
Reinforcement: Six layers of high tensile steel spiralwire
Cover: Black, ozone and weather resistant syntheticrubber with brown stripe
Temperature Range: -40C (-40F) to 120C(248F)
Couplings: Use PULSAR 8600 series interlock fit-tings for maximum strength. The picture shows an
8609HLU male cone insert with Figure 1502 nut.Exterior threaded ends are also stocked.
Pressure Test Charge: Extra at $60.00 net per hose as-sembly for hydrostatic proof test, stamping serial number
on hose and providing test certificate.
Part Working Bend Weight PRICE PER FOOT Standard
I.D. Number O.D. Pressure Radius per ft Cut Std Length Length
2" G665-200 2.79" 5000 psi 25" 4.44 lb $ 52.90 $ 48.60 164 ft
Six layers of spiral wire reinforcement make G665 ourhighest pressure Kelly hose. It has a full 4:1 safety fac-tor and is supplied in lengths up to 50 metres (164 ft) tominimize scrap.
G116 hose assemblies are used to record data during wellfracturing operations. The low volumetric expansion of G116hose coupled with it's extremely high working pressureand tough urethane cover make it the ideal hose for this
application. Fittings are factory installed and assembliesare 100% tested prior to use.