7/24/2019 5000 0.362 S-135 NC50 VAM EIS 6625 3500 2 v3

http://slidepdf.com/reader/full/5000-0362-s-135-nc50-vam-eis-6625-3500-2-v3 1/3

Size:Connection:Pipe grade:Range:

NEW CLASS 2OD in 5 4.855 4.783Wall thickness in 0.362 0.290 0.253% Remaining body wall % 100 80 70

ID in 4.276 4.276 4.276

GradeCross sectional area in² 5.275 4.154 3.606

NEW CLASS 2

Connection NC50 VAM EISOD in 6-5/8 5-7/8 5-27/32Dual OD in 7-1/8 7-1/8 7-1/8

ID in 3-1/2 3-1/2 3-1/2

Box ton len th Lb in 11 11 11

Pin tong length (Lp) in 9 9 9

Make-u loss MUL in 5.126 5.126 5.126

Grade KSI 130 130 130

Sh to Sh length 31,7 ft  Open end displacement 0,38 US gal/ft Approx weight 784 lbs  Closed end displacement 1,08 US gal/ft Adjusted weight 24,69 lbs/ft Capacity 0,70 US gal/ft

NEW CLASS 2Tensile strength lbs 712,000 561,000 487,000Torsional strength ft-lbs 74,100 58,100 50,40080% Tors. strength ft-lbs 59,300 46,500 40,300Collapse pressure PSI 15,700 10,000 7,080Internal pressure PSI 17,100 15,600 13,700

NEW CLASS 2Tensile stren th lbs 1,200,000 1,200,000 1,200,000Torsional strength ft-lbs 68,200 47,800 46,200Maximum make-u tor ue ft-lbs 42,900 30,100 29,100Recommended make-up torque ft-lbs 40,900 28,700 27,700Minimum make-up torque ft-lbs 38,900 27,200 26,300

Balance OD in 6.256 6.256 6.256Torsional ratio TJ/pipe 0.92 0.82 0.92

Copie de PDS Rev 13 06F HTJ, 2012-03-05, 5000 1950 S-135 NC50 VAM EIS 6625 3500 3173 110 90 40.pdf 

HANDLING HYDRAULICS

PIPE

 All data nominal and calculated per standard methods. VAM Drilling does not assume responsibility

for results obtained through the use of this information. No warranty expressed or implied.

5 IEU X 19.50 lbs/ft

PIPE

S-135

NC50 VAM EIS

Performance Datasheet

TOOL JOINT

2

Hydroclean Max Drill Pipe 

PREMIUM

PREMIUM

PREMIUM

PREMIUM

S-135

TOOL JOINT

DRILL PIPE DIMENSIONS & MATERIALS

DRILL PIPE ASSEMBLY DATA

DRILL PIPE MECHANICAL PERFORMANCES

7/24/2019 5000 0.362 S-135 NC50 VAM EIS 6625 3500 2 v3

http://slidepdf.com/reader/full/5000-0362-s-135-nc50-vam-eis-6625-3500-2-v3 2/3

Performance Datasheet Size:Connection:Pipe grade:Ran e:

Performances calculated with a friction factor and safety factor of 1.0

Copie de PDS Rev 13 06F HTJ, 2012-03-05, 5000 1950 S-135 NC50 VAM EIS 6625 3500 3173 110 90 40.pdf 

 All data nominal and calculated per standard methods. VAM Drilling does not assume responsibility

for results obtained through the use of this information. No warranty expressed or implied.

5 IEU X 19.50 lbs/ftNC50 VAM EISS-1352

Hydroclean Max Drill Pipe 

 AM Drilling provides a worldwide repair network and running assistance with AM Services and VAM Field Service International.

0

10 000

20 000

30 000

40 000

50 000

60 000

70 000

80 000

5-3/45-7/866-1/86-1/46-3/86-1/26-5/86-3/46-7/8

OD (in)

   P   i  p  e   Y   i  e   l   d   T  o  r  q  u  e ,

   T  o  o   l   J  o   i  n   t   M  a   k  e  u  p   T  o  r  q  u  e   (   f   t  -   l   b  s   )

New, Premium,

Class 2 Drill Pipe

Tool Joint Premium

Tool Joint

0

200 000

400 000

600 000

800 000

1 000 000

1 200 000

1 400 000

0 10 000 20 000 30 000 40 000 50 000 60 000 70 000 80 000 90 000 100 000

Torque (ft-lbs)

   T  e  n  s   i  o  n   (   l   b  s   )

New, Premium,

Class 2 Drill Pipe

Tool Joint Make-up Torque

DRILL PIPE COMBINED LOAD

DRILL PIPE WEAR

7/24/2019 5000 0.362 S-135 NC50 VAM EIS 6625 3500 2 v3

http://slidepdf.com/reader/full/5000-0362-s-135-nc50-vam-eis-6625-3500-2-v3 3/3

in lbsin lbsin s

in lbsin lbsin lbs

Copie de PDS Rev 13 06F HTJ, 2012-03-05, 5000 1950 S-135 NC50 VAM EIS 6625 3500 3173 110 90 40.pdf 

2,702,70

Slip Length

1116-1/2

2,70

Friction Factor

5 IEU X 19.50 lbs/ft

0,08

NC50 VAM EISS-1352

 AM Drilling provides a worldwide repair network and running assistance with

0,080,08

431,000

Performance Datasheet

Hydroclean Max Drill Pipe 

567,000

Size:Connection:Pipe grade:Range:

ransverse Load

Factor

Slip Crushing Load

Slip Crushing Load

16-1/2505,000

552,000

11

602,00022

 All data nominal and calculated per standard methods. VAM Drilling does not assume responsibility

for results obtained through the use of this information. No warranty expressed or implied.

Spiri and Reinhold, "Why Does Drill Pipe Fail in the Slip Area", World Oil, October 1959.

 AM Services and VAM Field Service International.

Slip Length

22507,000

SLIP CRUSHING LOAD

ELEVATOR CAPACITY 

0

200 000

400 000

600 000

800 000

1 000 000

1 200 000

1 400 000

5-3/45-7/866-1/86-1/46-3/86-1/26-5/86-3/46-7/8

Hydroclean OD (in)

   T  e  n  s   i  o  n

   (   l   b  s   )

100 ksi Shoulder Contact Pressure,

5-1/4 Elevator ID

100 ksi Shoulder Contact Pressure,

5-9/32 Elevator ID

65 ksi Shoulder Contact Pressure,

5-1/4 Elevator ID

65 ksi Shoulder Contact Pressure,

5-9/32 Elevator ID

New, Premium,Class 2 Drill Pipe

Tool Joint Tensile Capacity