Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
NETCON GW502Cyber secure communication gateway for the Netcon 500 outstation
Highly versatile communication gateway
FEATURES Main processor unit for the Netcon 500
Both serial and Ethernet traffic
Traffic prioritising and routing
Bandwidth usage optimisation
Traffic tunneling and encryption
Firewall
Protocol conversions
NETCON GW502Cyber secure communication gateway for the Netcon 500 outstation
3
Communication gateway for the Netcon 500 outstation
SEAMLESS SCADA INTEGRATION
The Netcon GW502 is the central processing and communication unit for the Netcon 500 RTU. Its NFE software handles conversions between a wide variety of up-stream and down-stream telecontrol protocols, allowing the seamless integration of different brands of outstations into your SCADA system.
Protocol Seri
al
IP Mas
ter
Slav
e
IEC 61850-8-1 client, ed. 1 & 2
IEC 60870-5-104
IEC 60870-5-104 with NUC exten-sions
NFE-link
Modbus serial/TCP
DNP3.0
IEC 60870-5-101
IEC 60870-5-103
ADLP80
RP570 & ADLP180
RP570 & ADLP180 modem pool
ANSI X3.28 (Allen Bradley)
COMLI
Alstom Courier
Ferranti MKIII
IEC 62056-21
Mobitex
Mobitex radio simulation
Netcon 8830/8080
NettLink
System NM
Nortroll
P&B
Procol
Sinaut ST1
Spacom
Telegyr 065, 102Telegyr 800
Applications
• Connection of power station RTUs, protection equipment and other serial communication devices to the control centre
• Conversion of substation protocols to the SCADA protocol
• Sharing of one substation between two SCADA systems
GPS time synchronisation
SeveralSCADA systems
IEC 61850 relays,IEDs
Netcon 500 OP
LegacyModbus RTU
and DNP3relays
IEC-103, JBUS andSPA relays
WAN
Ethernetswitch
M00114-BR-EN-8 © NETCONTROL GROUP 2019 NETCON IS A REGISTERED TRADEMARK OF NETCONTROL GROUP. 44
®
SECURE CONNECTIVITY
The Netcon GW502 provides secure networking thanks to its firewall, VPN and encryption features. It includes a 10/100 Mbps Ethernet switch.
TECHNICAL SPECIFICATIONS
Environmental requirements
• Complies with EN61000-6-2, EN61000-6-4 and EN61000-6-5
• Operating temperature: 0...+70°C*• Storage temperature: −40...+70°C• Relative humidity: 5...95%
Power supply
• Voltage range: 24...48 VDC• Power consumption: < 12 W
Connections
• Dual 10/100Base-TX Ethernet ports• Ethernet switch
– 4 × 10/100Base-TX – 1 × 100Base-FX
• 4 × RS-232 (V.24) serial ports• 2 × RS-485 (V.11) converters, e.g. for GPS receiver • V.24 console port• Rack bus interface• Two memory card slots
– one in front panel for SW updates – one on the circuit board for logging
* Continuous operation beyond +55°C may lead to degradation in MTBF.