3

Scotch-Weld™ Threadlockers weld fasteners and savings in place

For machinery that makes moneywhen rocking or shaking, a drop or two of 3M™ Scotch-Weld™

Threadlocker on threaded fastenershelps keep production equipment upand running.

You save the cost and time of disruptive, unscheduled downtimedue to nuts, bolts, and screws thatvibrate loose.

For blind holes and thru holes, these3M anaerobic adhesives cure in theabsence of air when the threadedmetal parts are joined.

• Prevent loosening from vibration and impact in such applications asgear housings and motor mounts

• Fill and seal threads completely to help stop corrosion, rust, and leaks

Typically with a nut and bolt, you rely on only 15% metal-to-metal contact in the threads; 85% is open

• Securely hold dissimilar metals

• Fast and easy to apply with just a targeted squeeze of the bottle

• Save the expense and work of mechanical locking devices

Easy to make the right choice

With the six 3M™ Scotch-Weld™

Threadlockers, you have a widerange of formulations to meet many

The easy choice to keep your plant up and running

application requirements, making theright choice easy.

• Easy-to-understand packaging

• Simplified, streamlined inventory to reduce money tied up on the shelf

• Every product backed with 3M technical support

MROEssentials

5070657 SW_ThreadLock 7/21/05 2:08 PM Page 1

3M™ Scotch-Weld™ Threadlockers

NOTE: The technical information and data above should be considered representative or typical only, and should not be used for specification purposes.

Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3Mproduct in a particular application, including the conditions under which the product is used and the time and environmental conditionsin which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essentialthat the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application. Warranty and Limited Remedy: 3M warrants that each 3M product meets the applicable specifications at the time 3M shipsthe product. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ORANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replacethe product or refund the purchase price.Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty,contract, negligence or strict liability.

3

MRO MarketsIndustrial Business Customer Service1-800-362-3550Electrical Customer Service1-800-245-3573www.3M.com/adhesives

3M is a trademark of 3MPrinted in U.S.A. Blgr. 5070657© 3M 2005 78-6901-2208-6Minimum 10% Post-Consumable Fiber

E

Product UPC # Removal Bolt Description Color Size Casenumber 0 00 (torque- size qty.

48011- break/prevail)

3493 56798 3 Low Less than • Screw grade •Thixotropic to reduce flow after application to surface Purple 10 ml 557300 7 50/30 lb. in. 5/16" • Hand tools for disassembly 50 ml 557301 4 250 ml 4

3494 57304 5 Medium Up to • Nut grade • Thixotropic to reduce flow after application to surface Blue 10 ml 557305 2 120/50 lb. in. 3/4" • Oil tolerant • Hand tools for disassembly 50 ml 557306 9 250 ml 4

3495 57309 0 Medium/high Up to • Permanent, controlled torque • High breakaway, reduced prevailing Red 10 ml 557310 6 200/100 lb. in. 1" torque • Heat and hand tools for disassembly 50 ml 557311 3 250 ml 4

3496 57312 0 High Up to • Permanent • Low viscosity • High breakaway, high prevailing torque Red 10 ml 557314 4 230/330 lb. in. 1" • Heat and hand tools for disassembly 50 ml 557315 1 250 ml 4

3497 57316 8 High Up to • Permanent • High viscosity • Wide temperature range Red 10 ml 557318 2 130/225 lb. in. 1-1/2" -65°F to 450°F (-55 to 232°C) • High breakaway, high prevailing torque 50 ml 557319 9 • Heat and hand tools for disassembly 250 ml 4

3498 57320 5 Medium Greater • Wicks into pre-assembled bolts • Seals welds and porous metals Green 10 ml 557322 9 85/250 lb. in. than 1/4" • Locks and seals small compression and ferrule fittings • Service 50 ml 557323 6 temperature to 300°F (149°C) • Heat and hand tools for disassembly 250 ml 4

3989 57395 3 – – • Accelerates cure of 3M anaerobic adhesive products • Helps assure NA 4.5 oz. 10Anaerobic cure on inactive metals • Dry time 30-60 seconds, 30-day on-part life Activator • Solvent-based (flammable acetone)

For more information, visit us at our website www.3M.com/MRO. Or call us at 1-800-567-1639, ext. 3145.

5070657 SW_ThreadLock 7/21/05 2:08 PM Page 2