Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
SWITC
HES
9-6www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
ORDERING DATA: SERIES 5360 PROXIMITY SWITCHES
CORD TYPE0 - Cabled2 - Quick Connect
TO ORDER SPECIFY:
SENSINGCIRCUITRY DESCRIPTION SWITCH COLOR
2-2 NPN or PNP DC Reed White3-1 NPN DC Hall Yellow4-1 PNP DC Hall Red5-1 NPN DC Solid State Black6-1 PNP DC Solid State Orange9-2 AC Reed w/Current Limiting Green
Type, Cord Type, Sensing Circuitry,Design No., and Cable Length.
2-2536 0
CABLE LENGTH02 - 2 meter length cable(Leave blank when quick connect is specified)
TYPEHall, Reed, Magnetoresistive
02-
NOTES:1) Cordsets for quick connect switches
must be ordered separately.2) Other cable lengths available. Consult PHD.
PART NO.63549-0263549-05
LENGTH2 meter5 meter
CORDSETSWITH QUICK CONNECT
9-7www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
BENEFITS: SERIES 5360 HALL EFFECT SWITCHES
BENEFITS
■ Series 5360 Hall Effect Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls.
■ Switches have no moving parts or mechanical contacts, providing long switch life and elimination of contact bounce.
■ Constant amplitude output is provided for use with most digital logic systems.
■ Low profile integral clamp mounting is easy to adjust over the entire piston travel of the cylinder or actuator.
■ Several switches may be mounted to control or initiate any sequence or function.
■ Dual LED indicators provide convenient means for positioning and troubleshooting circuits. Green LED shows that power is being received at the switch and amber shows when the switch output is on.
■ Available in a Quick Connect model for easy installation and maintenance.
Series 5360 Hall Effect Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Hall Effect Switches are solid-state, there are no moving parts to wear out. They offer an infinite number of trouble-free operations. Hall Effect Switches operate on DC current only.
SPECIFICATIONS 53603 & 53623 53604 & 53624OPERATING PRINCIPLE Hall EffectACTUATED BY Moving MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 20 mA. Max. 100 mA. Max.VOLTAGE DROP .5 VDC Max.SWITCH BURDEN 12 mA. Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C
MODEL NO. 53604 & 53624 - PNP (SOURCE)INPUT - 4.5-24 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - RED(LED’s have been omitted from the schematic for clarity.)
MODEL NO. 53603 & 53623 - NPN (SINK)INPUT - 4.5-24 VDCLOAD CURRENT - 20 mA. MAX.SWITCH HOUSING COLOR - YELLOW(LED’s have been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
SWIT
CH
DC
DCCABLED MODEL 53603
1
2/4
3
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DCQUICK CONNECT MODEL 53623
1
2/4
3
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DCQUICK CONNECT MODEL 53624
LOAD
SWIT
CH
DC
DCCABLED MODEL 53604
HALL EFFECT WIRING SCHEMATICS
BROWN
BLUE
BLACK
BROWN
BLUE
BLACK
BLACK
BROWN
BLUE
SWITC
HES
9-8www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
BENEFITS: SERIES 5360 SOLID STATE SWITCHES
BENEFITS
■ Series 5360 Solid State Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls.
■ Switches are solid state, having no moving parts or mechanical contacts, providing long switch life and elimination of contact bounce.
■ Transient voltage protection.
■ Constant amplitude output is provided for use with most digital logic systems.
■ Reverse polarity protection.
■ Low profile integral clamp mounting is easy to adjust over the entire piston travel of the cylinder or actuator.
■ Several switches may be mounted to control or initiate any sequence or function.
■ Dual LED indicators provide convenient means for positioning and troubleshooting circuits. Green LED shows that power is being received at the switch and amber shows when the switch output is on.
■ Available in a Quick Connect model for easy installation and maintenance.
Series 5360 Solid State Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Solid State Switches have no moving parts to wear out, they offer an infinite number of trouble-free operations. Solid State Switches operate on DC current only.
MODEL NO. 53606 & 53626 - PNP (SOURCE)INPUT - 6-24 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - ORANGE(LED’s have been omitted from the schematic for clarity.)
MODEL NO. 53605 & 53625 - NPN (SINK)INPUT - 6-24 VDCLOAD CURRENT - 20 mA. MAX.SWITCH HOUSING COLOR - BLACK(LED’s have been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
SWIT
CH
DC
DCCABLED MODEL 53605
1
2/4
3
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DCQUICK CONNECT MODEL 53625
1
2/4
3
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DCQUICK CONNECT MODEL 53626
LOAD
SWIT
CH
DC
DCCABLED MODEL 53606
SOLID STATE WIRING SCHEMATICS
BROWN
BLUE
BLACK
BROWN
BLUE
BLACK
BLACK
BROWN
BLUE
SPECIFICATIONS 53605 & 53625 53606 & 53626OPERATING PRINCIPLE Solid StateACTUATED BY Moving MagnetINPUT VOLTAGE 6 to 24 VDC Max.OUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 20 mA. Max. 100 mA. Max.VOLTAGE DROP .5 VDC Max.SWITCH BURDEN 12 mA. Max.ENVIRONMENTAL IP67*OPERATING TEMP. 0° to 80°C
9-9www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
DIMENSIONS: SERIES 5360 HALL/SOLID STATE SWITCHES
HALL EFFECT AND SOLID STATE SWITCH
.700 [17.8]
.325[8.2]
.580[14.7]
.061[1.5]
.460[11.7]
.150[3.8]
.320[8.1]
.126[3.2]
.290[7.4]
2 m CABLE x Ø .134 [3.40]
HALL EFFECT AND SOLID STATE SWITCH WITH MALE QUICK CONNECT
[M8x1]
CABLE x Ø .134 [3.40]
4.000[102.0] .290
[7.4].126[3.2]
.325[8.3]
.061[1.5]
.460[11.7]
.150[3.8]
.320[8.1]
(5.590 [142])
.580[14.7]
.700[17.8]
MODEL NO. A78.74[2 m]
196.85[5 m]
LETTER DIM.
63549-02
63549-05
PIN 2/4WIRE COLOR
BLACK
PIN 1WIRE COLORBROWN
PIN 3WIRE COLORBLUE
A
� .402[10.2]
.689 [19.3]
1.299 [34.8]
CABLE x � .177 [4.5]
63549-xx CORDSET WITH FEMALE QUICK CONNECT
NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
All dimensions are reference only unless specifically toleranced.
SWITC
HES
9-10www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
MODEL NO. A78.74[2 m]
196.85[5 m]
LETTER DIM.
63549-02
63549-05
PIN 2/4WIRE COLOR
BLACK
PIN 1WIRE COLORBROWN
PIN 3WIRE COLORBLUE
A
� .402[10.2]
.689 [19.3]
1.299 [34.8]
CABLE x � .177 [4.5]
63549-xx CORDSET WITH FEMALE QUICK CONNECT
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
DIMENSIONS: SERIES 5360 REED SWITCHESREED SWITCH REED SWITCH WITH MALE QUICK CONNECT
MODEL NO.53602-2 & 53622-253609-2 & 53629-2
A.685 [17.4].895 [22.7]
B1.090 [27.7]1.300 [33]
LETTER DIM.
BENEFITS: SERIES 5360 REED SWITCHES
BENEFITS
■ Series 5360 Reed Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls.
■ Low profile integral clamp mounting is easy to adjust over the entire piston travel of the cylinder or actuator.
■ Several switches may be mounted to control or initiate any sequence or function.
■ An LED indicator provides convenient means for positioning and troubleshooting circuits.
■ Available in a Quick Connect model for easy installation and maintenance.
■ Special current limit model available for AC applications where inrush might otherwise damage the switch. 53609-2*
SPECIFICATIONS 53602-2 & 53622-2 & 53629-2*OPERATING PRINCIPLE Magnetic ReedACTUATED BY Moving MagnetINPUT VOLTAGE 4.5 to 24 VDC 110 to 120 VACOUTPUT TYPE Contact ClosurePOWER CAPACITY 4 Watt Max. 2.5 Watt Max.CURRENT RATING 200 mA. Max. Inter. Limited to 20 mA.CONTACT RESISTANCE .200 Ohms Max. 1.5 kOhmENVIRONMENTAL IEC IP67OPERATING TEMP. 0° to 80°C
Series 5360 Reed Switches are available in either AC or DC models. They are ideal for use as inputs for many types of sequencers and programmable controllers. In some cases, they can be used to drive some relays or valve solenoids. However, electrical transients (inrush currents or line spikes) associated with inductive or capacitive loads can damage and shorten the life of the switch.
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
[M8x1]
CABLE x Ø .134 [3.40]
4.000[102.0] .290
[7.4].126[3.2]
.325[8.3]
.061[1.5]
.460[11.7]
.150[3.8]
.320[8.1]
(5.590 [142])
.580[14.7]
.700[17.8]
* CE certification not applicable to these switch models.
All dimensions are reference only unless specifically toleranced.
9-11www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
MODEL NO. 53602-2 & 53622-2 - NPN (SINK) OR PNP (SOURCE)INPUT - 4.5-24 VDCPOWER CAPACITY - 4 WATT MAX.LOAD CURRENT - 200 mA. MAX.
MODEL NO. 53609-2 & 53629-2INPUT - 110-120 VACSWITCHED POWER - 2.5 WATT MAX.INTERNAL RESISTANCE - 1.5 kOhmSWITCH HOUSING COLOR - GREEN
CABLED MODEL 53609-2
BLACK
BROWN
BLUE
LOAD
LIN
E
QUICK CONNECT MODEL 53629-2
LOAD
LIN
E
PIN 2/4
PIN 1
PIN 3
1
2/4
3
REED WIRING SCHEMATICS
LOAD
DC
DCCABLED MODEL 53602-2 - NPN (SINK) CABLED MODEL 53602-2 - PNP (SOURCE)
LOAD
DC
DC
1
2/4
3
QUICK CONNECT MODEL 53622-2 - NPN (SINK)
PIN 2/4
PIN 3
PIN 1
LOAD
DC
DC1
2/4
3
QUICK CONNECT MODEL 53622-2 - PNP (SOURCE)
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC
SWITCH HOUSING COLOR - WHITE(Bi-polar LED emits a green light in the Sinking circuitand a red light in the Sourcing circuit.)
BROWN
BLUE
BLACK
BROWN
BLUE
BLACK
BROWN
BLUE
BLACK
BLACK
BROWN
BLUE
BLACK
BROWN
BLUE
ENGINEERING DATA: SERIES 5360 REED SWITCHES
All dimensions are reference only unless specifically toleranced.
SWITC
HES
9-12www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
ORDERING DATA: SERIES 6250 PROXIMITY SWITCHES
CORD TYPE0 - Cabled1 - Quick Connect
TO ORDER SPECIFY:
SENSINGCIRCUITRY DESCRIPTION SWITCH COLOR
5-1 NPN (Sink) DC Solid State Brown6-1 PNP (Source) DC Solid State Tan7-1 AC/DC Reed Silver
Type, Cord Type, Sensing Circuitry,Design No., and Cable Length.
7-1625 0
CABLE LENGTH02 - 2 meter length cable(Leave blank when quick connect is specified)
TYPEReed, Magnetoresistive
02-
NOTES:1) Cordsets for quick connect switches
must be ordered separately.2) Other cable lengths available. Consult PHD.
PART NO.61397-0261397-05
CABLE LENGTH2 meter/3 wire5 meter/3 wire
CORDSETS WITH QUICK CONNECT
NOTE: This cordset is used for both3-wire and 2-wire applications.When used in 2-wire applications,refer to the schematic anddisregard the black wire.
9-13www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
BENEFITS: SERIES 6250 REED SWITCHES
BENEFITS
■ Series 6250 Reed Switches are available for use with PHD ISO Cylinder and on other select PHD actuators which use the “M” magnet option.
■ Series 6250 Reed Switches offer both 120 VAC or 10 to 30 VDC sink and source operation for maximum flexibility in interfacing with various electronic controls.
■ Special current limiting feature is designed into each switch for protection against potential current inrush damage to switch components.
■ Integral clamp mounting provides easy attachment and adjustment while eliminating the cost of brackets and additional hardware.
■ Several switches may be used on an actuator to control or initiate a sequence or function.
■ LED indicator provides convenient means for positioning and troubleshooting circuits.
■ Switches include either a hard wired 24 AWG, Polyurethane (PUR) jacketed cable making it virtually impervious to chemical or environmental damage, or an integral 8 mm screw type connector mounted directly on the switch.
■ IP67 Environmental Protection
SPECIFICATIONS 62507-1 62517-1SWITCH COLOR SilverOPERATING PRINCIPLE Magnetic ReedACTUATED BY Moving MagnetINPUT VOLTAGE 10 to 30 VDC or 110-120 VAC*OUTPUT VOLTAGE Contact ClosurePOWER CAPACITY 2.5 Watt Max.CURRENT RATING Internally Limited to 25 mA.IMPEDANCE 2.25 k OhmENVIRONMENTAL IP67OPERATING TEMP. 0� to 80�C
MODEL NO. 62507-1 & 62517-1INPUT - 10 to 30 VDCPOWER CAPACITY - 2.5 WATTS MAX.LOAD CURRENT - 25 mA. MAX.SWITCH HOUSING COLOR - SILVER
MODEL NO. 62507-1 & 62517-1INPUT - 110 - 120 VACPOWER CAPACITY - 2.5 WATTS MAX.LOAD CURRENT - 25 mA. MAX.INTERNAL RESISTANCE - 2.25 k OhmSWITCH HOUSING COLOR - SILVER
REED WIRING SCHEMATICS
CABLED MODEL 62507-1Alternate load position forsink circuitBROWN
BLUE DC
DCLOAD
QUICK CONNECT MODEL 62517-1
1
2/4
3
PIN 1
PIN 3 DC
DCLOAD
BROWN
BLUE
CABLED MODEL 62507-1
1
2/4
3
PIN 1
PIN 3
QUICK CONNECT MODEL 62517-1
LIN
ELI
NE
LOAD
LOAD
Alternate load position forsink circuit
Alternate load position forsink circuit
LOAD
LOAD
LOAD
LOAD
Alternate load position forsink circuit
* CE certification applicable to 10 to 30 VDC range only.
SWITC
HES
9-14www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
BENEFITS: SERIES 6250 SOLID STATE SWITCHES
BENEFITS
■ Series 6250 Solid State Switches are available for use with PHD ISO Cylinders and on other select PHD actuators which use the “M” magnet option
■ Available in both current sinking or current sourcing models for maximum flexibility in interfacing with various electronic controls.
■ Series 6250 Solid State Switch circuitry protects against voltage surges and other electrical anomalies associated with operating systems.
■ Integral clamp mounting provides easy attachment and adjustment while eliminating the cost of brackets and additional hardware.
■ Several switches may be mounted to control or initiate any sequence or function.
■ An LED indicator provides convenient means for positioning and troubleshooting circuits.
■ Switches include either a hard wired 24 AWG, Polyurethane (PUR) jacketed cable making it virtually impervious to chemical or environmental damage, or an integral 8mm screw type connector mounted directly on the switch.
■ IP67 Environmental Protection
Series 6250 Solid State Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Solid State Switches have no moving parts to wear out, they offer an infinite number of trouble-free operations. Solid State Switches operate on DC current only.
MODEL NO. 62506-1 & 62516-1 - PNP - (SOURCE)INPUT - 10-30 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - TAN(LED has been omitted from the schematic for clarity.)
MODEL NO. 62505-1 & 62515-1 - NPN - (SINK)INPUT - 10-30 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - BROWN(LED has been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOADMR
SWIT
CH
DC
DCCABLED MODEL 62505-1
1
2/4
3
2/4
PIN 1
PIN 3
LOADMR
SWIT
CH
DC
DCQUICK CONNECT MODEL 62515-1
1
2/4
3
2/4
PIN 1
PIN 3
LOADMR
SWIT
CH
DC
DCQUICK CONNECT MODEL 62516-1
BLACK
BROWN
BLUE
LOADMR
SWIT
CH
DC
DCCABLED MODEL 62506-1
MAGNETORESISTIVE WIRING SCHEMATICS
62505-1 & 62506-1 &SPECIFICATIONS 62515-1 62516-1SWITCH COLOR Brown TanOPERATING PRINCIPLE MagnetoresistiveACTUATED BY Moving MagnetINPUT VOLTAGE 10 to 30 VDCOUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 100 mA. Max. 100mA. Max.VOLTAGE DROP .5 VDC Max.SWITCH BURDEN 12 mA. Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C
9-15www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
.318[8.1] .660
[16.7]
.183[4.6]
.158[4]
.071[1.8]
.503[12.8] .380
[9.6]
.682[17.3]1.088
[27.6]
MODEL NO. A78.7
[2000]197.0[5000]
LENGTH
3 wire
3 wire
LETTER DIM.
61397-02
61397-05
PIN 3 - BLUE WIREPIN 2/4 - BLACK COLOR
.335[8.5]
PIN 1 - BROWN WIRE CABLE x � .177 [4.5]
A
DIMENSIONS: SERIES 6250 REED/SOLID STATE SWITCHES
REED AND SOLID STATE SWITCHWITH QUICK CONNECT
REED AND SOLID STATESWITCH CABLED
.660[16.7]
.203[5.2]
SGNL
.876[22.3]
.682[17.3]1.088
[27.6]
M8 THREAD
.660[16.7]
.503[12.8]
.380[9.6]
.318[8.1]
.071[1.8]
61397-xx CORDSET WITH FEMALE QUICK CONNECT
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
NOTE: THIS CORDSET IS USED FOR BOTH 3-WIRE AND 2-WIRE APPLICATIONS. WHEN USED IN 2-WIRE APPLICATIONS, REFER TO THE SCHEMATIC AND DISREGARD THE BLACK WIRE.
All dimensions are reference only unless specifically toleranced.
SWITC
HES
9-16www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
ORDERING DATA: SERIES 1750 SWITCHES
ORDERING DATA
COMMON BENEFITS■ Series 1750 switches are available for use on most Tom
Thumb and PHD products for simple interfacing to many types of electrical controllers.
■ The compact low profile design saves space and provides mounting versatility.
■ Low profile bracket attaches securely across two tie rods and allows easy position adjustment over the entire piston travel of the cylinder or actuator.
■ IP67 Environmental Protection
■ Red LED indicator provides convenient method for position setting and troubleshooting.
■ Available in a cabled or 8 mm threaded Quick Connect model for easy installation and maintenance.
■ 24 AWG polyurethane (PUR) jacketed cable is robust and virtually impervious to chemical and environmental damage.
■ Multiple switches may be mounted to control or initiate any sequence or function.
SOLID STATE BENEFITS■ Solid state switches afford long life. Constant amplitude output
allows use with most digital logic systems.
■ Switch circuitry protects against voltage surges and other electrical anomalies associated with operating systems.
■ Excellent switch hysteresis characteristics and symmetry.
■ Offered in 10-30 VDC current sinking and current sourcing versions for simple interfacing to electronic system controllers.
REED BENEFITS■ Available as either 10-30 VDC or 110-120 VAC models
for simple interfacing to sequencers and programmable controllers.
■ Can be used to directly drive some types of relays or valve solenoids.
CORD TYPE0 - Cabled2 - Quick Connect
TO ORDER SPECIFY:
SENSINGCIRCUITRY DESCRIPTION SWITCH COLOR
2-2 NPN or PNP DC Reed White3-2 NPN DC Solid State Yellow4-2 PNP DC Solid State Red9-3 *AC Reed w/Current Limiting Green
Type, Cord Type, SensingCircuitry, Design No., andCable Length.
2-2175 0
CABLE LENGTH06 - 6 ft [1.8 m] length cable(Leave blank when quick connect is specified)
06- NOTES:1) Cordsets for quick connect
switches must be ordered separately. See page 9-17.
2) Other cable lengths available. Consult PHD.
3) *CE certification not applicable to the AC Reed with Current Limiting model.
TYPESolid State, Reed
PART NO.63549-0263549-05
LENGTH2 meter5 meter
CORDSETSWITH QUICK CONNECT
9-17www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
.500 [12.7] MAX
.137 [3.5] MAX
1.000[25.4]LED INDICATOR
.690[17.5]
LINEAR SECTION17000-36-017000-37-017000-40-017000-41-017000-35-0
SERIES1000 & 20003000 & 40005000 & 60007000 & 8000MINIATURE
ROTARY SECTION17000-32-517000-34-517000-38-017000-39-0
—
COMPACT BRACKETSROTARY & MULTI-MOTION ACTUATORS
NPG
METRIC1925293519293551752935
COMPACT BRACKETS17000-31-517000-32-517000-33-517000-34-517000-35-017000-36-017000-37-017000-40-017000-41-017000-33-517000-36-0
EA, EL,& NEA
AV & HV
SERIES
CYLINDERSBORE SIZE
IMPERIAL3/41
1-1/81-3/83/4
1-1/81-3/8
23
1-1/81-3/8
COMPACT BRACKETS*17000-51-017000-51-017000-51-017000-51-017000-51-017000-57-0
IMPERIAL LARGE BORE CYLINDERSBORE SIZE
1-1/22
2-1/23-1/4*
45, 6, & 8
*3-1/4" Bore C& C Cylindersrequire switchbracket5142-54-3.
SWITCH BRACKETDOES NOT EXTENDBEYOND CYLINDER
OUTLINE ON THIS SIDE
.144 [3.7] MAX
.429 [10.9] MAX
1.000[25.4] LED INDICATOR
.700[17.8]
17000-31-517000-32-517000-33-517000-34-5
17000-35-017000-36-017000-37-017000-40-017000-41-0
SWITCH BRACKET DOES NOT EXTENDBEYOND CYLINDER OUTLINE ON THIS SIDE
DESCRIPTIONStrain relief kit for non -5 brackets (-35-0 through -41-0)Strain relief kit for Series SD/SE Slide size 26
PART NUMBER1749418412
SD/SE SLIDESBRACKET
17000-31-517000-32-517000-33-517000-34-558050-02
BORE SIZE2223242526
REED SWITCH
LED INDICATOR 4° TYP
6 ft [1.8 m] CABLEx Ø .177 [4.5].473
[12.0]
.028 [.71]
Ø .200 [4.6]
1.000 [25.4]
.286[7.3]
.322[8.2]
.178[4.52]
.323[8.2]
MALE QUICK CONNECT DETAIL
SOLID STATE SWITCH
Ø .200 [4.6]
LED INDICATOR
1.000 [25.4]
4° TYP
.286[7.3]
6 ft [1.8 m] CABLEx Ø .177 [4.5]
.322[8.2]
.178[4.52]
.323[8.2]
.473[12]
MALE QUICK CONNECT DETAIL
4° TYP
.473[12.0]
.028 [.71]
4.000[101.6]
Ø .177 [4.5]
.286[7.3]
.322[8.2]
.178[4.52]
.323[8.2]
(5.590 [142])
.314[8]
M8x1
NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
SWITCH BRACKETS17000-xx-5
DIMENSIONS: SERIES 1750 SWITCHES
MODEL NO. L78.74[2 m]
196.85[5 m]
LETTER DIM.
63549-02
63549-05
PIN 2/4WIRE
COLORBLACK
BLACK CABLE
PIN 3WIRE COLORBLUE L
1.299[34.8]
Ø .402[10.2]
.689[19.3]
BLACK CONNECTORPIN 1WIRE COLORBROWN
63549-xx CORDSET WITH FEMALE QUICK CONNECT
NOTES: 1) For alternative supplier part numbers, see page 9-5.2) For earlier design switches 1752x-1 and 17529-2, use cordset 17533-00-02 or 17533-00-05.
17000-xx-0
All dimensions are reference only unless specifically toleranced.
SWITC
HES
9-18www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
SPECIFICATIONS: SERIES 1750 SWITCHES
17502-2 17509-3*SPECIFICATIONS 17522-2 17529-3*OPERATING PRINCIPLE Magnetic ReedACTUATED BY Piston MagnetINPUT VOLTAGE 10-30 VDC 110-120 VACPOWER CAPACITY 10 Watt Max. 10 Watt Max.OUTPUT TYPE Contact ClosureCURRENT RATING 200 mA. Inter. Limited
Switched to 85 mA.CONTACT RESISTANCE .1 Ohm Max. .1 Ohm Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C
SPECIFICATIONS 17503-2 & 17523-2 17504-2 & 17524-2OPERATING PRINCIPLE Solid StateACTUATED BY Piston MagnetINPUT VOLTAGE 10-30 VDCOUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 20 mA. Max 100 mA. MaxVOLTAGE DROP .5 VDCSWITCH BURDEN 10 mA. Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C
* CE certification not applicable to these switch models.
MODEL NO. 17504-2 & 17524-2 - PNP (SOURCE)INPUT - 10-30 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - RED(LED’s have been omitted from the schematic for clarity.)
MODEL NO. 17503-2 & 17523-2 - NPN (SINK)INPUT - 10-30 VDCLOAD CURRENT - 20 mA. MAX.SWITCH HOUSING COLOR - YELLOW(LED’s have been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
SWIT
CH
DC
DCCABLED MODEL 17503-2
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DCQUICK CONNECT MODEL 17524-2
BLACK
BROWN
BLUE
LOAD
SWIT
CHDC
DCCABLED MODEL 17504-2
SOLID STATE WIRING SCHEMATICS
MODEL NO. 17502-2 & 17522-2 - NPN (SINK) OR PNP (SOURCE)INPUT - 10-30 VDCPOWER CAPACITY - 3 WATT MAX.LOAD CURRENT - 200 mA. MAX.SWITCH HOUSING COLOR - WHITE(Bi-polar LED emits a red light.)
MODEL NO. 17509-3 & 17529-3INPUT - 120 VACSWITCHED POWER - 3 WATT MAX.INTERNAL RESISTANCE - 1.5 kOhmSWITCH HOUSING COLOR - GREENCABLED MODEL 17509-3
LOAD
LIN
E
REED WIRING SCHEMATICS
BROWN
BLACK
BLUE
LOAD
DC
DCCABLED MODEL 17502-2 - NPN (SINK)
CABLED MODEL 17502-2 - PNP (SOURCE)
LOAD
DC
DC
BROWN1
2/4 BLACK
3BLUE
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DCQUICK CONNECT MODEL 17523-2
BROWN1
2/4 BLACK
3BLUE
QUICK CONNECT MODEL 17522-2 - NPN (SINK)
PIN 2/4
PIN 3
PIN 1
LOAD
DC
DC BROWN1
2/4 BLACK
3BLUE
QUICK CONNECT MODEL 17522-2 - PNP (SOURCE)
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC BROWN1
2/4 BLACK
3BLUE
LOAD
LIN
E
PIN 2/4
PIN 1
PIN 3
BROWN1
2/4 BLACK
3BLUE
BROWN
BLACK
BLUE
BROWN
BLACK
BLUE
QUICK CONNECT MODEL 17529-3
9-19www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
ORDERING DATA: SERIES 5580 PROXIMITY SWITCHES
BENEFITS
■ Series 5580 Proximity Switches are available for use on selected PHD products making it easy to interface these actuators with various electronic controls.
■ Hall Effect Switches are solid state for long life and elimination of contact bounce. Constant amplitude output is provided for use with most digital logic systems.
■ Low profile mounting is easy to adjust at the ends of travel of the slide or gripper.
■ LED indicator provides convenient means for positioning and troubleshooting circuits. An LED shows when the switch output is on.
■ Available in a Quick Connect model for easy installation and maintenance.
HALL EFFECTPHD Series 5580 Hall Effect Proximity Switches are
designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Hall Effect Switches are solid-state, there are no moving parts to wear out. The switches offer an infinite number of trouble-free operations. Hall Effect Switches operate on DC current only.
REEDPHD Series 5580 Reed Switches are available in a DC model.
They are ideal for use as inputs for many types of sequencers and programmable controllers. In some cases, they can be used to drive some relays or valve solenoids. However, electrical transients (inrush currents or line spikes) associated with inductive or capacitive loads can damage and shorten the life of the switch.
SPECIFICATIONS 55803 & 55823 55804 & 55824OPERATING PRINCIPLE Hall EffectACTUATED BY Target MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 20 mA. Max. 100 mA. Max.VOLTAGE DROP .5 VDC Max.SWITCH BURDEN 12 mA. Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C
SPECIFICATIONS 55802 & 55822OPERATING PRINCIPLE Magnetic ReedACTUATED BY Target MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT TYPE NPN (Sink) or
PNP (Source)CURRENT RATING 200 mA. SwitchedCONTACT RESISTANCE .090 Ohm Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C
TYPEHall, Reed
TO ORDER SPECIFY:Type, Cord Type, Sensing Circuitry,Design No., and Cable Length.
2-1558 0
CABLE LENGTH02 - 2 meter length cable(Leave blank when quick connect is specified)
02-
NOTES:1) Cordsets for quick connect switches
must be ordered separately.2) Other cable lengths available. Consult PHD.
CORD TYPE0 - Cabled2 - Quick Connect
SENSINGCIRCUITRY DESCRIPTION SWITCH COLOR
2 - 1 NPN or PNP DC Reed White3 - 1 NPN DC Hall Yellow4 - 1 PNP DC Hall Red
PART NO.63549-0263549-05
LENGTH2 meter5 meter
CORDSETSWITH QUICK CONNECT
SWITC
HES
9-20www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
63549-xx CORDSET WITH FEMALE QUICK CONNECT
DIMENSIONS: SERIES 5580 PROXIMITY SWITCHES
HALL EFFECT AND REED SWITCH
HALL EFFECT AND REED SWITCH WITH MALE QUICK CONNECT
1.180 [30.0]
.118[3.0]
2 m CABLE x Ø .134 [3.4]
.236 [6.0]SQ.118[3.0]
MODEL NO. 55804 & 55824 - PNP (SOURCE)INPUT - 4.5-24 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - RED(LED has been omitted from the schematic for clarity.)
MODEL NO. 55803 & 55823 - NPN (SINK)INPUT - 4.5-24 VDCLOAD CURRENT - 20 mA. MAX.SWITCH HOUSING COLOR - YELLOW(LED has been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
SWIT
CH
DC
DCCABLED MODEL 55803
BLACK
BROWN
BLUE
LOAD
SWIT
CH
DC
DCCABLED MODEL 55804
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DC
QUICK CONNECT MODEL 55824
HALL EFFECT WIRING SCHEMATICS
REED WIRING SCHEMATICS
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DC
QUICK CONNECT MODEL 55823
MODEL NO. 55802 & 55822 - NPN (SINK) OR PNP (SOURCE)INPUT - 4.5-24 VDC(Bi-polar LED emits a green light in the Sinking circuit and a red light in the Sourcing circuit.)
BLACK
BROWN
BLUE
DC
DC
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC
CABLED MODEL 55802 - NPN (SINK)
QUICK CONNECT MODEL 55822 - NPN (SINK)
CABLED MODEL 55802 - PNP (SOURCE)
QUICK CONNECT MODEL 55822 - PNP (SOURCE)
LOAD CURRENT - 200 mA. MAX.SWITCH HOUSING COLOR - WHITE
DC
DC
BLACK
BLUE
BROWN
LOAD LOAD
BROWN1
2/4 BLACK
3BLUE
BROWN1
2/4 BLACK
3BLUE
BROWN1
2/4 BLACK
3BLUE
BROWN1
2/4 BLACK
3BLUE
NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
[M8x1]
CABLE x � .134 [3.40]
4.000[102.0]
1.180 [30.0](5.550 [141])
.236 [6.0] SQ
MODEL NO. A78.74[2 m]
196.85[5 m]
LETTER DIM.
63549-02
63549-05
PIN 2/4WIRE COLOR
BLACK
PIN 1WIRE COLORBROWN
PIN 3WIRE COLORBLUE
A
� .402[10.2]
.689 [19.3]
1.299 [34.8]
CABLE x � .177 [4.5]
All dimensions are reference only unless specifically toleranced.
9-21www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
ORDERING DATA
NOTES:1) Cordsets for quick connects must be ordered separately.2) *AC Reed (9-2) available with quick connect only.
TO ORDER SPECIFY:Product Type, Cable Type,Sensing Circuitry, Cable Length
2-1679 0
SENSING CIRCUITRY2-1 PNP or NPN DC Reed9-2 AC Reed
CABLE TYPE0 - Cabled2 - Quick Connect
PRODUCT TYPEReed
PART NO.63549-0263549-05
LENGTH2 meter5 meter
CORDSETSWITH QUICK CONNECT
CABLE LENGTH05 - 5 meter length cableLeave blank when quickconnect is specified
05-
67902-1-0567922-167929-2
AVAILABLE MODELS
BENEFITS■ Model 6790 Switches are available for use on many actuators.
■ Saving space and providing mounting versatility, the round design fits into grooves in the body of the actuator.
■ IP67 Environmental Protection
■ LED indicator provides convenient method for position setting and troubleshooting.
■ Available in 8 mm threaded Quick Connect model for easy installation and maintenance.
■ 28 AWG Polyurethane (PUR) jacketed cable
■ Multiple switches may be mounted to control or initiate any sequence or function.
■ Available in 4.5 - 30 VDC or 65 - 120 VAC models for simple interfacing to sequencers and programmable controllers.
■ Can be used to directly drive some types of relays or valve solenoids within the switch specifications stated.
4.5 - 30 VDC
50 mA Max.
.12 Ohm Max
SPECIFICATIONS OPERATING PRINCIPLEACTUATED BYINPUT VOLTAGEOUTPUT TYPECURRENT RATINGENVIRONMENTALOPERATING TEMP.IMPEDANCE
67902 & 67922Magnetic ReedPiston Magnet
Contact Closure
IP67-20° to 85°C
67929
65 - 120 VAC
25 mA Max.
1.5 k Ohm
ORDERING DATA: MODEL 6790 SWITCHES
SWITC
HES
9-22www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
BENEFITS: MODEL 6790 SWITCHES
MODEL NO.63549-0263549-05
LETTER DIM.L
78.74 [2 m]196.85 [5 m]
PIN 2/4WIRE COLOR
BLACK
BLACK CABLE
PIN 3WIRE COLORBLUE L
1.299[34.8]
Ø .402[10.2]
.689[19.3]
BLACK CONNECTORPIN 1WIRE COLORBROWN
63549-xx CORDSET WITH FEMALE QUICK CONNECT
MODEL NO. 67904-1 & 67924-1 - PNP (SOURCE)INPUT: 4.5-30 VDCLOAD CURRENT: 50 mA. MAX.SWITCH HOUSING COLOR: BLACK(Bi-polar LED emits a red light.)
MODEL NO. 67903-1 & 67923-1 - NPN (SINK)INPUT: 4.5 - 30 VDCLOAD CURRENT: 50 mA. MAX.SWITCH HOUSING COLOR: BLACK(Bi-polar LED emits a yellow light)
SOLID STATE WIRING SCHEMATICS
MODEL NO. 67902-1 & 67922-1 - NPN (SINK) OR PNP (SOURCE)INPUT: 4.5 - 30 VDCLOAD CURRENT: 50 mA. MAX.IMPEDANCE: .12 Ohm MAX.SWITCH HOUSING COLOR: BLACK(LED emits a red light)
REED WIRING SCHEMATICS
CABLED MODEL 67902 - NPN (SINK) CABLED MODEL 67902 - PNP (SOURCE)
QUICK CONNECT MODEL 67923
QUICK CONNECT MODEL 67922 - NPN (SINK) QUICK CONNECT MODEL 67922 - PNP (SOURCE)
CABLED MODEL 67903
QUICK CONNECT MODEL 67924
BLACK
BROWN
BLUE
LOAD
SWIT
CH
DC
DC
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DC
CABLED MODEL 67904
BLACK
BROWN
BLUE
LOAD
SWIT
CHDC
DC
PIN 2/4
PIN 1
PIN 3
LOAD
SWIT
CH
DC
DC BROWN1
2/4 BLACK
3BLUE
BROWN
BLACK
BLUE
LOAD
DC
DC
PIN 2/4
PIN 3
PIN 1
LOAD
DC
DC BROWN1
2/4 BLACK
3BLUE
LOAD
DC
DCBROWN
BLACK
BLUE
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC BROWN1
2/4 BLACK
3BLUE
BROWN1
2/4 BLACK
3BLUE
SWIT
CHSW
ITCH
SWIT
CHSW
ITCH
MODEL NO. 67929-2INPUT: 65 - 120 VDCLOAD CURRENT: 25 mA. MAX.IMPEDANCE: 1.5 k OhmSWITCH HOUSING COLOR: BLACK(LED emits a red light)
AC REED WIRING SCHEMATICSQUICK CONNECT MODEL 67929-2
PIN 2/4
PIN 3
PIN 1
LOAD
BROWN1
2/4 BLACK
3BLUE
SWIT
CH
LIN
E
3-48 x 3/16 [4.8]SET SCREW .050 [1.3] HEX*
.180 [4.6].102 [2.6]
.134 [3.4]
.236 [6]
1.736 [44]
Ø .315 [8].260 [6.6]M8 x 1 THREAD
LED.078 [2]
.136 [3.5].777 [19.7]
1.100 [27.9]
.156 [3.9].108 [2.7].095 [2.4]
MALE QUICK CONNECT DETAIL
*MAX. SCREW TORQUE 1.0 in-lb [.110 Nm] METRIC INFORMATION SHOWN IN [ ]
12.0 [305]
All dimensions are reference only unless specifically toleranced.
9-23www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
ORDERING DATA: MODEL JC1 SWITCHES
TO ORDER SPECIFY:Product, Series, Design No.,Options, Type, Circuit Type, andCable Options.
TYPED - DC Single PositionT - DC 2 Position Teachable
DESIGN NO.
SC P1
OPTIONSS - Solid State
2
PRODUCTJ - Switches
J
SERIESC - C-Slot Mounting
T
CIRCUIT TYPEN - NPNP - PNP
(DC 2 positionteachable available in
PNP only)
-
CABLE OPTIONSK - Quick Connect2 - 2 Meter Cable (Available on JC1STP only)5 - 5 Meter Cable (Not available on JC1STP)
NEW PHD SWITCH no direct substitute*†no direct substitute*†
JC1SDN-5JC1SDN-5JC1SDP-5JC1SDP-5
no direct substitute*†JC1SDN-KJC1SDP-K
still available
CURRENT 6790 SWITCH67902-1-0267902-1-0567903-1-0267903-1-0567904-1-0267904-1-05
67922-167923-167924-167929-2
DESCRIPTIONPNP or NPN DC Reed, 2 meter CablePNP or NPN DC Reed, 5 meter CableNPN DC Solid State, 2 meter CableNPN DC Solid State, 5 meter CablePNP DC Solid State, 2 meter CablePNP DC Solid State, 5 meter Cable
PNP or NPN DC Reed, Quick ConnectNPN DC Solid State, Quick ConnectPNP DC Solid State, Quick Connect
AC Reed, Quick Connect
SWITCH CROSS REFERENCE CHART
*Consider Solid State to replace DC Reed.† CAUTION: If used for 67902-1-xx or 67922-1 Switch replacement, power connection (brown and
blue leads) may need to be reversed to match connection diagram on page 6.
SWITC
HES
9-24www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
Common Benefits for Both Styles• Fits into 4mm switch slot
• IP67 Environmental Protection
• LED indicator for convenient setting and troubleshooting
• Integrated protection circuitry including short circuit protection
• Polyurethane (PUR) jacketed cable
• Available in solid state sensing only for longest life and most reliable operation
• Improved switch hysteresis and magnetic response uniformity
• Quick connect available
Both switches have a unique housing design which allows “drop-in” installation from the side, does not have to be inserted from the end of the slot
Recommended PHD Products Use• GRIPPERS: Series GRK, EGRK, GRB, GRF (JC1SD only), & GRS (JC1SD only)• ROTARY ACTUATORS: Series RI, RCC• SLIDES: Series SFP, SFM, SHP, STP, SIP, SMx, & SxL, SxH• CYLINDERS: Series CRS & CTS
Teachable Series JC1 Switches
• Teachable switches feature two programmable outputs. Switch is simply mounted in a convenient location, such as middle of travel, then actuator is placed in first desired position and first output is set. Then actuator is placed in second desired position and second output is set. Outputs retain settings even after power interruption.
• Since each switch provides two outputs, an actuator with only two slots may have up to four outputs by using two switches.
• Offered in 12 – 30 VDC current sourcing (PNP) version only
• Available in cabled (2 meter) or quick connect versions.
Standard Series JC1 Switches• Available in cabled (5 meter) or quick connect versions
• Available in solid state sensing only for longest life and most reliable operation
• Offered in 10 – 30 VDC current sinking (NPN) and current sourcing (PNP) versions for simple interfacing to system controllers.
• Replaces PHD Series 6790 Switches (excluding AC applications) See chart on page 2.
TEACHABLE
STANDARD
Use two position teachable switches for:
• Reduced cabling • Simplified setup,
• More sensing positions
Standard JC1 Switches
can be used on manyPHD Standard
Actuators
Tilt switchto drop in, thenrotate logo up.
BENEFITS: SERIES JC1 SWITCHES
9-25www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
This switch provides the ability to identify two separately programmable positions with a single switch. Programmable capability means no “fine-tuning.” With switch properly aligned, just place actuator in desired positions and program. Solid-state sensing technology provides a highly reliable switch. Elliptical housing allows for easy “drop-in” installation from the side, and does not have to be inserted from the end of the slot. LED indicators on module for positioning and programming. Available with 2 meter cable or 8 mm threaded Quick Connect.
JC1STP-2
DIMENSIONS: SERIES JC1ST TEACHABLE SWITCHES
ENGINEERING DATA: SERIES JC1ST TEACHABLE SWITCHES
SERIES JC1ST TWO POSITION TEACHABLE MAGNETIC SWITCH
JC1STP-2
JC1STP-K (Quick Connect) 81284-1-001 CORDSET
SPECIFICATIONS JC1STP-xOPERATING PRINCIPLE Programmable Magnetic
Field CharacterizationINPUT VOLTAGE 12 - 30 VDCNUMBER & TYPE OF OUTPUTS Two PNP (source),
separately adjustableOUTPUT CURRENT 100 mA max.,
Short Circuit ProtectionVOLTAGE DROP � 2.2 VDCSWITCH BURDEN � 15 mAENVIRONMENTAL IP67OPERATING TEMP. -20�C to 75�CTYP. DETECTION AREA 0-50 mm
PART NO.JC1STP-2JC1STP-K
SWITCH DESCRIPTIONPNP (Source), Solid State, 12-30 VDC, 2 meter cablePNP (Source), Solid State, 12-30 VDC, Quick Connect
MATCHING CORDSETPART NO.
81284-1-001DESCRIPTION
M8, 4 pin, Straight Female Connector, 5 meter cable
M8 x 1
� .394[10]
1.200[30.5]
M8 x 1
PIN 1WIRE
COLORBROWN
PIN 2WIRECOLORWHITE
PIN 3WIRECOLORBLUE
PIN 4WIRECOLORBLACK
.150[3.8]
.113[2.87]
.768[19.5]
3.750[95.25]
1.181[30]
.177[4.5] .256
[6.5]
.020[0.5]
FOR SWITCH DIMENSIONSSEE ABOVE
19.125[485.78]
FOR TEACH MODULEDIMENSIONS SEE ABOVE
1.349[34.3]
DETECTION AREA
JC1STP-2
JC1STP-K (Quick Connect) 81284-1-001 CORDSET
SPECIFICATIONS JC1STP-xOPERATING PRINCIPLE Programmable Magnetic
Field CharacterizationINPUT VOLTAGE 12 - 30 VDCNUMBER & TYPE OF OUTPUTS Two PNP (source),
separately adjustableOUTPUT CURRENT 100 mA max.,
Short Circuit ProtectionVOLTAGE DROP � 2.2 VDCSWITCH BURDEN � 15 mAENVIRONMENTAL IP67OPERATING TEMP. -20�C to 75�CTYP. DETECTION AREA 0-50 mm
PART NO.JC1STP-2JC1STP-K
SWITCH DESCRIPTIONPNP (Source), Solid State, 12-30 VDC, 2 meter cablePNP (Source), Solid State, 12-30 VDC, Quick Connect
MATCHING CORDSETPART NO.
81284-1-001DESCRIPTION
M8, 4 pin, Straight Female Connector, 5 meter cable
M8 x 1
� .394[10]
1.200[30.5]
M8 x 1
PIN 1WIRE
COLORBROWN
PIN 2WIRECOLORWHITE
PIN 3WIRECOLORBLUE
PIN 4WIRECOLORBLACK
.150[3.8]
.113[2.87]
.768[19.5]
3.750[95.25]
1.181[30]
.177[4.5] .256
[6.5]
.020[0.5]
FOR SWITCH DIMENSIONSSEE ABOVE
19.125[485.78]
FOR TEACH MODULEDIMENSIONS SEE ABOVE
1.349[34.3]
DETECTION AREA
TEACHABLE
SWITC
HES
9-26www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
PROGRAMMING GUIDE: SERIES JC1 TEACHABLE SWITCHES
� � �
������������������������������������������������� ����������������������������������������������������������������������������������������� �������������������� �������������������������������������� ������������������������������������������������ �������� ������������������������������������������������������������� ������������������������������������������������� ������������������������������������������������ �������������������������������������������������������� ���������������������������������������������������� ������� ��������������������� ��� ����� ���������������������������� ����������������������������������������������������������������������������������� ������������������������������ ��� ����� ��������������������������� ��������� ��� ����������������������������������� ����� ����� ����������������� ��������������� ������������������������������������������������������������
���������������������������������������������������������������������������������������������������������������������������������������������������������
�
�
�
�������
���������������
����
�������������
�����������������������
����
������������������������������ ���������
�����������������
9-27www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
This switch provides the ability to identify a single position. Solid-state sensing technology provides a highly reliable switch. Elliptical housing allows for easy “drop-in” installation. Includes LED indicator for convenient means of positioning. Available with PNP or NPN output. Available with cable or 8 mm threaded Quick Connect.
SERIES JC1SD MAGNETIC SWITCH
DIMENSIONS: SERIES JC1SD STANDARD SWITCHES
ENGINEERING DATA: SERIES JC1SD STANDARD SWITCHES
63549-xx CORDSET
HS1(SIZE 35 & 46)(SIZE 58 & 75-SWITCH HOUSINGDOES NOT PROTRUDEBELOW SURFACEOF GRIPPER)
HS3
SWITCH ON OPEN
7.0[18.0]
PART NO.JC1SDP-5JC1SDP-KJC1SDN-5JC1SDN-K
SWITCH DESCRIPTIONPNP (Source), Solid State, 10-30 VDC, 5 meter cablePNP (Source), Solid State, 10-30 VDC, Quick Connect
NPN (Sink), Solid State, 10-30 VDC, 5 meter cableNPN (Sink), Solid State, 10-30 VDC, Quick Connect
MATCHING CORDSETPART NO.63549-0263549-05
DESCRIPTIONM8, 3 pin, Straight Female Connector, 2 meter cableM8, 3 pin, Straight Female Connector, 5 meter cable
mm5.63.2
LETTERDIMHS1HS3
in.220.125
GRK-x-35 X 6.5 or 12MODEL NUMBER
GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26mm.4
10.9
in.015.430
mm
16.3
in
.640
mm
21.6
in
.850
JC1SDx-5
JC1SDx-K (Quick Connect)
M8 x 1
MIN
196.85[5 m]
.984[25]
.140[3.6]
1.349[34.3]
9.250[234.0]
SPECIFICATIONS JC1SDP-x JC1SDN-xOPERATING PRINCIPLE Solid State Detection of Moving MagnetINPUT VOLTAGE 10 - 30 VDCOUTPUT TYPE PNP (source) NPN (sink)OUTPUT CURRENT 100 mA max., Short Circuit ProtectionVOLTAGE DROP 2.5 VDCSWITCH BURDEN 8 mAENVIRONMENTAL IP67OPERATING TEMP. -25 C to 75 C
.111[2.8]
.984[25]
.140[3.6]
.111[2.8]
MIN
PIN 2/4WIRE COLOR
BLACK
PIN 1WIRE COLORBROWN
PIN 3WIRE COLORBLUE .402
[10.2]
.689[19.3]
1.299[34.8]
STANDARD
63549-xx CORDSET
HS1(SIZE 35 & 46)(SIZE 58 & 75-SWITCH HOUSINGDOES NOT PROTRUDEBELOW SURFACEOF GRIPPER)
HS3
SWITCH ON OPEN
7.0[18.0]
PART NO.JC1SDP-5JC1SDP-KJC1SDN-5JC1SDN-K
SWITCH DESCRIPTIONPNP (Source), Solid State, 10-30 VDC, 5 meter cablePNP (Source), Solid State, 10-30 VDC, Quick Connect
NPN (Sink), Solid State, 10-30 VDC, 5 meter cableNPN (Sink), Solid State, 10-30 VDC, Quick Connect
MATCHING CORDSETPART NO.63549-0263549-05
DESCRIPTIONM8, 3 pin, Straight Female Connector, 2 meter cableM8, 3 pin, Straight Female Connector, 5 meter cable
mm5.63.2
LETTERDIMHS1HS3
in.220.125
GRK-x-35 X 6.5 or 12MODEL NUMBER
GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26mm.4
10.9
in.015.430
mm
16.3
in
.640
mm
21.6
in
.850
JC1SDx-5
JC1SDx-K (Quick Connect)
M8 x 1
MIN
196.85[5 m]
.984[25]
.140[3.6]
1.349[34.3]
9.250[234.0]
SPECIFICATIONS JC1SDP-x JC1SDN-xOPERATING PRINCIPLE Solid State Detection of Moving MagnetINPUT VOLTAGE 10 - 30 VDCOUTPUT TYPE PNP (source) NPN (sink)OUTPUT CURRENT 100 mA max., Short Circuit ProtectionVOLTAGE DROP 2.5 VDCSWITCH BURDEN 8 mAENVIRONMENTAL IP67OPERATING TEMP. -25 C to 75 C
.111[2.8]
.984[25]
.140[3.6]
.111[2.8]
MIN
PIN 2/4WIRE COLOR
BLACK
PIN 1WIRE COLORBROWN
PIN 3WIRE COLORBLUE .402
[10.2]
.689[19.3]
1.299[34.8]
JC1SDP-K & JC1SDN-K 63549-XX
JC1SDP-5 & JC1SDN-5
JC1SDN-x JC1SDP-x
SWITC
HES
9-28www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
APPLICATIONS: SERIES JC1 STANDARD SWITCHES
Series JC1SD Magnetic Switches replace the old style Series 6790 DC Switches and can be used on all standard PHD Components listed.
• GRIPPERS: Series GRK, EGRK, GRB, GRF (JC1SD only), & GRS (JC1SD only)• ROTARY ACTUATORS: Series RI, RCC• SLIDES: Series SFP, SFM, SHP, STP, SIP, SMx, & SxL, SxH• CYLINDERS: Series CRS & CTS
Series SIP
Series GRF (JC1SD only)
Series SxH
Series CTS
Series SFM, SFP
Series SHP
Series GRB
Series STP
Series RI
Series RCC
Series CROld Series 6790Switch
Series GRS (JC1SD only)
Series GRK
9-29www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
DC INDUCTIVE PROXIMITY SWITCHES4 mm ROUND
PART NO.18430-001-0218430-002-02
DESCRIPTIONNPN (Sink) 10-30 VDC, 2 meter cablePNP (Source) 10-30 VDC, 2 meter cable
2 meter cordset for all Series 5580 Switches with QuickConnect. Other cable lengths available - contact PHD.
6 mm SQUARE
PART NO.18431-001-0218431-002-02
DESCRIPTIONNPN (Sink) 10-30 VDC, 2 meter cablePNP (Source) 10-30 VDC, 2 meter cable
2 meter cordset for all Series 5580 Switches with QuickConnect. Other cable lengths available - contact PHD.
8 mm THREADED
PART NO.51422-005-0251422-006-02
DESCRIPTIONNPN (Sink) 10-30 VDC, 2 meter cablePNP (Source) 10-30 VDC, 2 meter cable
2 meter cordset for all Series 5580 Switches with QuickConnect. Other cable lengths available - contact PHD.
BENEFITS■ High reliability provided by solid state inductive sensing
technology.
■ Ease of mounting with PHD’s Proximity Switch Bracket Kit and Target Kits for grippers. These kits include all hardware for mounting the switch and the target that is used to actuate the switch. (See Slide and Gripper sections for details.)
■ Suitable for plant environments where dirt and contamination create difficulties for electromechanical and other types of switches.
■ LED indicator circuits are standard on 4 mm round, 6 mm square, and 8 mm threaded and provide a convenient means of positioning and troubleshooting.
18430-001-02 18430-002-02SPECIFICATIONS 18431-001-02 18431-002-02 51422-005-02 51422-006-02INPUT VOLTAGE 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC 10 to 30 VDCOUTPUT TYPE NPN (Sink) PNP (Source) NPN (Sink) PNP (Source)SENSING RANGE 0.8 mm Max. 0.8 mm Max. 1.5 mm Max. 1.5 mm Max.OUTPUT CURRENT RATING 100 mA. Max. 100 mA. Max. 200 mA. Max. 200 mA. Max.SWITCH BURDEN 10 mA. Max. 10 mA. Max. 10 mA. Max. 10 mA. Max.VOLTAGE DROP 2.5 VDC Max. 2.5 VDC Max. 1.0 VDC Max. 1.0 VDC Max.CIRCUIT PROTECTION Yes Yes No NoREVERSE VOLTAGE YesOUTPUT STATE Normally OpenENVIRONMENTAL IP67
15561-00110 to 30 VDCNPN (Sink)
1.6 mm Max.200 mA Max.8 mA Max.1.5 V Max.
Yes
15561-00210 to 30 VDCPNP (Source)1.6 mm Max.200 mA Max.8 mA Max.1.5 V Max.
YesYes
Normally OpenIP68
15561-00320 to 250 VAC
Solid State1.6 mm Max.130 mA Max.
—11 V Max.
No
BLACK
BROWN
BLUE
LOAD
SWIT
CH
DC
DC
MODEL 15561-00118430-001-0218431-001-0251422-005-02
BLACK
BROWN
BLUE
LOAD
SWIT
CH
DC
DC
MODEL 15561-00218430-002-0218431-002-0251422-006-02
WIRING SCHEMATICS
BROWN
BLUESWIT
CH
NEUTRAL
LINE
LOAD
ACMODEL 15561-003
DC NPN (Sink) DC PNP (Source)
12 mm THREADED
PART NO.15561-00115561-00215561-003
DESCRIPTIONNPN (Sink) 10-30 VDC, 3 meter cablePNP (Source) 10-30 VDC, 3 meter cable20-250 VAC, 3 meter cable
SWITC
HES
9-30www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
SERIES 62002 8 mm ROUND THREADED PROXIMITY SWITCH
SERIES 62002 SWITCHES
SERIES 62002 PROXIMITY WIRING SCHEMATICS
BROWN
BLUE
LOAD
SWIT
CH
DC
DC
MODEL NO. 62002-1-02 - NPN (SINK) OR PNP (SOURCE)INPUT - 4.5-24 VDCPOWER CAPACITY - 1.0 WATT MAX.LOAD CURRENT - 40 mA MAX.
CABLED MODEL 62002 - PNP (SOURCE) CABLED MODEL 62002 - NPN (SINK)
BROWN
BLUE LOADSWIT
CH
DC
DC
SPECIFICATIONS 62002-1-02OPERATING PRINCIPLE Magnetic ReedACTUATED BY Target MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT VOLTAGE Contact ClosurePOWER CAPACITY 1.0 Watt Max.CURRENT RATING 40 mA Max.CONTACT RESISTANCE .200 Ohm Max.ENVIRONMENTAL IP67OPERATING TEMP. 0� to 70�C
PART NO.62002-1-02
DESCRIPTION8 mm Threaded Reed Switch with 2 meter cable
1.075[27.31]
2x .160[4.1]
.085[2.16]
2x .265[6.73]
(M8 x 1.0-6g THREAD)
M8 HEX NUT (2 SUPPLIED)
LED IN THIS APPROX LOCATION
.220[5.59]
.984 � .080[25 � 2.03]
.59[14.99]
.51[12.95]
.795[20.19]
.990[25.15]
74.74 � .79[1900 � 20]
.276 � .040[7 � 1]
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
All dimensions are reference only unless specifically toleranced.
9-31www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
BENEFITS
■ Provides independent and fully adjustable multiple position sensing on Series 8400 Angular Grippers, Series 190 & 191 Parallel and 190 Angular Grippers, Series 5300 Oval Grippers, and all Rotary Actuators and Multi-Motion Actuators.
■ Independent adjustment of two set point positions from two sensors allows one set point module to interface with two actuators. Or, can be used with a single unit providing 4 adjustable set points throughout jaw travel or rotation.
■ Solid state electronics with Hall Effect sensing technology for an infinite number of trouble-free cycles.
■ Wide signal range capability permits interfacing with most programmable controllers and other logic systems.
■ LED indicators for visual confirmation of each output state.
■ Set Point Module is available for either current sinking or current sourcing models with 4.5 to 24 VDC output capability.
BENEFITS: HALL SENSOR WITH SET POINT MODULE
SPECIFICATIONS 9800-01-0300 9800-01-0400OPERATING PRINCIPLE Linear Hall EffectINPUT VOLTAGE 18 to 24 VDCOUTPUT TYPE NPN (Sink) PNP (Source)
Open Collector Collector OutputOUTPUT VOLTAGE 4.5 to 24 VDCOUTPUT CURRENT RATING 200 mA. Max.OUTPUT VOLTAGE DROP .4 VDC Max. .5 VDC Max.
at Rated Current at 50 mA.SWITCH BURDEN 150 mA. Max.OPERATING TEMP. 0° to 60°C (32° to 140°F)HUMIDITY 5 to 95% (NON CONDENSING)
ORDERING DATA: HALL SENSOR WITH SET POINT MODULE
DUAL INPUT SET POINT MODULEPART NO.
9800-01-03009800-01-0400
DESCRIPTIONNPN (Sink) 4.5-24 VDCPNP (Source) 4.5-24 VDC
2 meter cordset for all Series 5580 Switches with QuickConnect. Other cable lengths available - contact PHD.
HALL SENSOR KITFOR SERIES 190, 191, & 8400 MINIATURE GRIPPERS
DESCRIPTIONSize 6 Models 19x60, 19x61, & 19x62 ParallelSize 7 Models 19x70, 19x71, & 19x72 ParallelSize 8 Models 19x80, 19x81, & 19x82 ParallelSize 9 Models 19x90, 19x91, & 19x92 ParallelSize 0 Model 19x02 AngularSize 1 Model 19x12 AngularSize 2 Model 19x22 AngularSize 3 Model 19x32 Angular8400 Gripper Angular8410 Gripper Angular8420 Gripper Angular8430 Gripper Angular
PART NO.IMPERIAL METRIC18674-04 18057-0418675-04 18058-0418676-04 18059-0418677-04 18060-04
— 18057-04— 18058-04— 18059-04— 18060-04
10906-12 —10907-12 —10908-12 —18686-04 —
HALL EFFECT SENSOR/TRANSDUCERThe Sensor/Transducer must be ordered as part of the Gripper
or Actuator assembly. The Sensor/Transducer will be mounted to the unit with a transition plate. See individual unit Ordering Data for availability and ordering information. Individual replacement sensors are avai lable as shown.
APPLICATIONSGRIPPERS■ Provides two adjustable sensing positions throughout jaw
travel for two grippers (through a single set point module).
■ Allows the assurance of part presence by ensuring the jaws have closed or opened to the proper size.
■ Permits “go, no go” type gauging to occur as parts are gripped.
ROTARY ACTUATORS & MULTI-MOTION ACTUATORS■ Provides two adjustable sensing positions throughout
the 180° rotation of two rotary actuators or multi-motion actuators.
■ Can be used to signal ends of rotation of two units.
INDIVIDUAL REPLACEMENT SENSORSPART NO.
10688-2-12
10832-1-1-12
DESCRIPTIONSensor for all 8600, 7900, and 5300 Angular Grippers, and 8600 Parallel GrippersSensor for all Rotary Actuators and Multi-Motion Actuators
NOTE: All sensors come with 12 ft [3 m] minimum of shielded cable.
SWITC
HES
9-32www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
10688-2-012 BASIC HALL SENSOR
SERIES 7900, 8600 3-JAW, & 5300 ANGULAR GRIPPERS GRIPPER
MODEL NO.792x, 862x, & 1532x793x, 863x, & 1533x794x, 864x, & 1534x795x, 865x, & 1535x
A.854 [21.5].917 [23.5]
1.112 [28.5]1.586 [40.5]
B1.257 [32.0]1.540 [39.0]1.945 [49.5]2.500 [63.5]
LETTER DIMENSIONC
0.00 [0.0].122 [3.0].247 [6.0].441 [11.0]30°
B
A C
2X THRU HOLEFOR #6 SCREWS
.625 [28.5]
.125[28.5]
.375[9.5]
.500 [13.0]
1.125[28.5]
12 FT [4 m] OF SHIELDEDCABLE IS INCLUDED WITH SENSOR
.237 [6.0]
.246[6.0]
SERIES 190 & 191 PARALLEL GRIPPERS
GRIPPERMODEL NO.
19x6x19x7x19x8x19x9x
A1.437 [36.5]1.555 [39.5]1.810 [46.0]2.283 [58.0]
B.650 [16.5].550 [14.0].295 [7.5].295 [7.5]
LETTER DIMENSIONC
.787 [20.0]
.985 [25.0]1.496 [38.0]1.968 [50.0]
C
.375[9.5]
.187[5.0]
A
B
A
.375[5.0] .187
[9.5]
C
B
GRIPPER MODEL NO.IMPERIAL METRIC
840x 19002841x 19012842x 19022843x 19032
A1.354 [36.5]1.454 [39.5]1.704 [46.0]2.237 [58.0]
B.654 [16.5].554 [14.0].304 [7.6].300 [7.6]
LETTER DIMENSIONC
.700 [20.0]
.900 [25.0]1.400 [38.0]1.910 [50.0]
SERIES 8400 & 190 ANGULAR GRIPPERS
DUAL INPUT SET POINT LOGIC EXAMPLE
Both gripper jaws are wide open. No setpoints are made.
The jaws of gripper A are closed to grip apart and are wide open on gripper B. Oneset point is made for gripper A.
Both gripper jaws are closed to grip a part.Two set points are made, one for gripper Aand one for gripper B.
Gripper A jaws are closed all the way (noparts) and Gripper B jaws are closed to gripa part. Two set points for gripper A and oneset point for gripper B are made.
Both gripper jaws are closed all the way (noparts). Two set points are made for bothgrippers A and B.
In the event one gripper is wide open (A)and the other is closed all the way (B), onlythe two set points for the closed gripperwould be made.
CASE 1 CASE 2 CASE 3 CASE 4
CASE 5 CASE 6
A B A B A B A B
A BA B CASE123456
SET POINT OUTPUTA1011110
A2000110
B1001111
B2000011
DIMENSIONS: HALL SENSOR & SET POINT MODULE
All dimensions are reference only unless specifically toleranced.
9-33www.phdinc.com/products/switchesandsensors • (800) 624-8511
SWITC
HES
PHDV1
DIMENSIONS: HALL SENSOR & SET POINT MODULE
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
SERIES 1000-8000 ROTARY ACTUATORS & MULTI-MOTION ACTUATORS
ACTUATORSERIES
1000 & 20003000 & 40005000 & 60007000 & 8000
A2.980 [75.7]4.230 [107.4]4.980 [126.5]7.980 [202.7]
B2.000 [50.8]3.000 [76.2]4.000 [101.6]5.000 [127.0]
LETTER DIM.
3 m SHIELDED CABLE FROM THIS SIDEON SERIES 1000 & 2000 UNITS ONLY
B
.500 [12.7]
3 m SHIELDED CABLE FROM THIS SIDEON SERIES 3000-8000 UNITS
LIMITATIONS: SENSOR MAY BE USED ON UNITS WITH MAXIMUM ROTATION UP TO AND INCLUDING 180°
A
MODEL 9800-01-0300NPN (SINK)
MODEL 9800-01-0400PNP (SOURCE)
BLACKCOMMON
18-24 VDCPOWER SUPPLY
INPUT TOPROGRAMMABLECONTROLLER
BLAC
K
RED
RED
WHITE
WHITE
OUTPUTS A1 & A2
OUTPUTS B1 & B2
123456789
10
BLACKCOMMON
PRIMARYSUPPLY
INPUT TOPROGRAMMABLECONTROLLER
RED
WHITE
WHITE
OUTPUTS A1 & A2
OUTPUTS B1 & B2
123456789
10
A
B
A
B
OPTIONAL -REQUIRED ONLY IF
DESIRED SOURCEOUTPUT VOLTAGE IS
OTHER THAN THATOF PRIMARY SUPPLY
IF OUTPUT VOLTAGEREQUIRED IS THESAME AS THE PRIMARYSUPPLY ATTACH AJUMPER BETWEENTERMINALS 1 & 10
18-24 VDCPOWER SUPPLY
BLAC
K
RED
ENGINEERING DATA: HALL SENSOR WITH SET POINT MODULE
WIRING SCHEMATICSDiagrams are typical for many programmable
controller interface applications. Modules may also be used to signal TTL. CMOS, relays or solenoids within rated electrical specifications.
NOTE: For single applications where four outputs are desired, install a jumper between terminals 4 & 5.
SET POINT MODULE #9800-01-0x00
+ 18 - 24 VDC
-0 VDC
TRNS POS
TRNS SIG A
TRNS SIG B
OUTPUT A1
OUTPUT A2
OUTPUT B1
OUTPUT B2
+ 4,5-24VDCSOURCEONLY
3.470 [88.0]
.270[7.0]
.905[23.0]
2.190[55.6] 3.720
[94.5]
.490[12.5]2.220 [56.5]
4X SET POINT MADELED INDICATORS
4X THRU HOLE FOR#8 [M4] SCREW
.140 [3.5]
4.000[101.5]
.750[22.0]
.220[5.5]
4X SET POINTADJUSTMENT
.295[7.5]
3.410[86.5]
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
All dimensions are reference only unless specifically toleranced.
SWITC
HES
9-34www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1
BENEFITS & DIMENSIONS: BRACKETS FOR NFPA CYLINDERS
BENEFITS■ Allows PHD Series 1750 Reed and Hall Effect
Switches to be mounted to 1-1/2" [38.1 mm] to 8" [203.2 mm] bore NFPA Cylinders.
■ The brackets’ flexible design means only two brackets are required to cover 8 sizes of NFPA Cylinders.
■ The extruded aluminum bracket attaches securely to a single tierod and does not allow the switch to pull away from the cylinder barrel.
■ The low profile of the switch and bracket saves space and provides additional mounting flexibility.
■ Optional strain relief clamp may be used to protect the switch cable from damage at the switch due to flexing.
PART NO.17509-3-0617502-2-0617529-317522-217503-2-0617504-2-0617523-217524-2
DESCRIPTIONAC ReedDC ReedAC Reed, Quick ConnectDC Reed, Quick ConnectHall Effect NPN (Sink)Hall Effect PNP (Source)Hall Effect NPN (Sink), Quick ConnectHall Effect PNP (Source), Quick Connect
NFPA CYLINDERBORE
1-1/2, 2, 2-1/2,3-1/4, & 4
5, 6, & 8
SWITCH BRACKETNUMBER
17000-51-0
17000-57-0
STRAIN RELIEFBRACKET
18412
18412
PHD SWITCH MODELS
See pages 9-16 to 9-18 for switch information. NFPA cylinder must have the proper magnetic piston for the PHD Switchesto function correctly.
17000-xx-0 NFPA SWITCH BRACKET18412 CABLE RESTRAINT KIT
1.000[25.4] LED INDICATORA REF
C SQ REF
B REF
OPTIONAL CABLERESTRAINT BRACKET
D REF DIA
BORESIZE1-1/2
22-1/23-1/4
4568
A1.3751.5001.7502.0002.3753.0003.3754.000
B1.5001.7501.8752.1872.5003.1253.3754.125
LETTER DIMENSIONC
2.0002.5003.0003.7504.5005.5006.5008.500
D.250.312.312.375.375.500.500.625
PART NO.17502-2-0617509-3-0617503-2-0617504-2-06
DESCRIPTIONDC Reed NPN/PNP (White)AC Reed (Green)Solid State NPN (Yellow)Solid State PNP (Red)
PHD SWITCH MODELS
All dimensions are reference only unless specifically toleranced.