Material composition
Material compositionMade from Chrysolite Asbestos Fiber with
Synthetic Elastomers and Inorganic fillers.Applications:Suitable To
Seal off Steam, hot Oils, & various aromatic Hydrocarbons,
solvents & Refrigerants in high stress conditions. Motor oil,
transmissions and hydraulic fluids, low temp, oil, steam Alkalis,
anti freeze, refrigerating oil, for IC engines, compressors,
chemical plants, hot oil tar oil and chlorinated and aromatic
hydrocarbon.Standard Sheet Size
15002000 mm,15004000 mm,15001500 mm, 15004500 mm,15003000 mm,
20003000 mmTolerance
Thickness (1 mm = 0.10 mm Length 50 mm
>1mm = 0.10% width 50 mmMaterial dataGeneral information
Material typeCompressed Asbestos Fiber (CAF)
Non Metallic Range
Temperature limit600 C
Internal Pressure limit200 bar
Specification complianceIS: 2712 / 1998 Grade W/1, O/1ASTM:F104
F112330 M7JIS: R 3453(1985) type 1
BS: 2815-1973 Grade A
BS: 1832-1991 Grade A
Thickness (mm)0.6 6
ColorGray/Gray
Physical propertiesStandardUnitValue
Density (Nominal)IS:2712/1998[g/cm]1.7-2.2
Tensile StrengthIS:2712/1998[Kg/cm]>24.0
CompressibilityIS:2712/1998[%]6 -14
RecoveryIS:2712/1998[%]>40
Ignition lossIS:2712/199823
Fluid absorption
In ASTM oil no.3IS:2712/1998
Increase in mass[%]
