Upload
charlotte-stephany-kelly
View
221
Download
1
Tags:
Embed Size (px)
Citation preview
Introduction
• Step 1. connect the corner panels• Step 2. connect the back and side wall panels• Step 3. Install the roof• Step 4. Install the slopping wall (front wall)• Step 5. assemble the PVC profile inside the house• Step 6. assemble the corner aluminum plastic profile• Step 7. Install the door lock• Step 8. seal all the gap• Extra explanation about the solar panel connection
Step 5. assemble the PVC profile inside the house
• After rivet all the panel connection, put all the PVC profile on as the picture shown
Step 6. assemble the corner aluminum plastic profile
1. Finish view at this stage
2. Use the black glue to put the corner profile on the outside house
corner and the bottom part.
Step 8 seal all the gap
• Seal all the gap between panels by using the black glue
• Finish the house installation