Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange (standard). Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M2

12 1/2˝

14 1/2˝

6 7/8˝

5˝

6 3/8˝

R E F L E C T O R K I T

O P E N

5300 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

6 7/8˝

5˝6 3/8˝

5˝ Aperture

O P E N B A F F L E D

5350 Open Baffle

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

PF Polished Flange

6 7/8˝

5˝6 3/8˝

5˝ Aperture

W A L L W A S H

5310 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

6 7/8˝

5˝6 3/8˝

5˝ Aperture

ORDERING INFORMATION EXAMPLE: 5VF113E1-2-5300SCL

5VF

Dimming Ballast OptionsDA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Emergency Battery w/ Internal Mounted Test SwitchGSK - Neoprene Foam Gasketing

Reflector

Open5300

Open Baffled5350

Wall Wash5310

Options

3FRPFEMEMIGSK

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Replace E1-2 with DA7 for dimming

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Ceiling Cut Out 5 5/8˝

Housing Part Number

5VF113E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 35

˝ VE

RT

ICA

L F

LU

OR

ES

CE

NT

# of Lamps x Wattage

1x13

Project Name: Type:

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum deep low iridescent reflector with self trimming white painted flange (standard). Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 3

12 1/2˝

14 1/2˝

9 1/4˝

5 ˝6 3/8˝

R E F L E C T O R K I T

O P E N

5500 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

Deep 5˝ Aperture

9 1/4˝

5 ˝6 3/8˝

O P E N B A F F L E D

5550 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

PF Polished Flange

Deep 5˝ Aperture

9 1/4˝

5 ˝6 3/8˝

W A L L W A S H

5510 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

Deep 5˝ Aperture

9 1/4˝

5 ˝6 3/8˝

5˝

VE

RT

ICA

L F

LU

OR

ES

CE

NT

5VF

ORDERING INFORMATION EXAMPLE: 5VF113E1-2-5500SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 VoltF - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Emergency Battery w/ Internal Mounted Test Switch GSK - Neoprene Foam Gasketing

Reflector

Open Deep5500

Open Baffled Deep5550

Wall Wash Deep5510

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 5 5/8˝

Housing Part Number

5VF113E1-25VF118E1-2

5VF126-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x131x18

1x26, 1x32, 1x42* Fixture suitable for Quad

or Triple Tube Lamps

Options

3FR

PFEMEMIGSK

Project Name: Type:

L E N S E D

5511 Tempered Clear 5514 Tempered Prismatic 5516 Fresnel

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

Deep 5˝ Aperture

Self-flanged lens holder splay. Safety chain provided.

91/4˝

4 3/4˝6˝

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M

5˝ V

ER

TIC

AL

FL

UO

RE

SC

EN

T

ORDERING INFORMATION EXAMPLE: 5VF113E1-2-5511SCL

5VF

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - Remodeler

EM - Emergency BatteryPF - Polished FlangeDGSK - Silicone-Sealed Lens & Gasketing

R E F L E C T O R K I T

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum deep low iridescent reflector with self trimming white painted flange (standard). Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

12 1/2˝

14 1/2˝

91/4˝

4 3/4˝6 ˝

4

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Reflector

Lensed 5511 5514 5516

Options

3FR

EMPF

DGSK

Finish

SCL SGC ECL WHT

Baffle

/BL /WH

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 5 5/8˝

Housing Part Number

5VF113E1-25VF118E1-2

Electronic 120-277 volt is standard*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x131x18

* Fixture suitable for Quad or Triple Tube Lamps

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 5

6˝

VE

RT

ICA

L F

LU

OR

ES

CE

NT

6VFR E F L E C T O R K I T

ORDERING INFORMATION EXAMPLE: 6VF113E1-2-6002SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Emergency Battery w/ Internal Mounted Test SwitchGSK - Neoprene Foam Gasketing

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum deep low iridescent reflector with self trimming white painted flange (standard). Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

9 3/4˝

6 1/4˝

7 1/2˝

O P E N

6002 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

9 3/4˝

6˝ Aperture

6 1/4˝7 1/2˝

O P E N B A F F L E D

6052 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

PF Polished Flange

9 3/4˝

6˝ Aperture

6 1/4˝7 1/2˝

W A L L W A S H

6102 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

9 3/4˝

6˝ Aperture

6 1/4˝7 1/2˝

Reflector

Open6002

Open Baffled6052

Wall Wash6102

Options

3FRPFEMEMIGSK

Baffle

/BL/WH

Finish

SCLSGCECLWHT

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

Housing Part Number

6VF113E1-26VF118E1-2

6VF126-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x131x18

1x26, 1x32, 1x42* Fixture suitable for Quad

or Triple Tube Lamps

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

Finish

SCL SGC ECL WHT

Baffle

/BL /WH

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum low iridescent reflector with self trimming flanged play/lens holder and white painted flange. Polished flange available. Safety chain provided.

F E A T U R E S

R E F L E C T O R K I T

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M

14 /8˝

14 1/2˝

9 3/4˝

6 ˝

7 1/2˝

L E N S E D

6211 Tempered Clear 6214 Tempered Prismatic 6216 Fresnel 6219 Drop Opal Lens

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

6˝ Aperture

9 3/4˝

6 ˝7 1/2˝

6221 Tempered Clear 6224 Tempered Prismatic 6226 Fresnel 6229 Drop Opal Lens

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

6˝ ApertureL E N S E D B A F F L E D

9 3/4˝

6 ˝7 1/2˝

6˝ V

ER

TIC

AL

FL

UO

RE

SC

EN

T

6VF

6

F R A M E - I N K I T

ORDERING INFORMATION EXAMPLE: 6VF113E1-2-6211SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - Remodeler

EM - Emergency Battery PF - Polished FlangeDGSK - Silicone-Sealed Lens & Gasketing

Reflector

Lensed6211 6214 6216 6219

Lensed Baffled

6221 6224 6226 6229

Options

3FR

EMPF

DGSK

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

Housing Part Number

6VF113E1-26VF118E1-2

Electronic 120-277 volt is standard*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x131x18

* Fixture suitable for Quad or Triple Tube Lamps

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

7

7˝

VE

RT

ICA

L F

LU

OR

ES

CE

NT

7VF

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M

F R A M E - I N K I T R E F L E C T O R K I T

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange (standard). Polished Flange available.

F E A T U R E S14 7/8˝

14 1/2˝

10 1/2˝

6 1/2˝

7 3/4˝

O P E N7˝ Aperture

7200 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

10 1/2˝

6 1/2˝7 3/4˝

O P E N B A F F L E D

7250 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

10 1/2˝

6 1/2˝7 3/4˝

7˝ Aperture

W A L L W A S H

7102 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

10 1/2˝

6 1/2˝7 3/4˝

7˝ Aperture

ORDERING INFORMATION EXAMPLE: 7VF113E1-2-7200SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Emergency Battery w/ Internal Mounted Test Switch GSK - Neoprene Foam Gasketing

Reflector

Open7200

Open Baffled7250

Wall Wash7102

Options

3FRPF EMEMIGSK

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

Housing Part Number

7VF113E1-27VF118E1-2

7VF126-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x131x18

1x26, 1x32, 1x42* Fixture suitable for Quad

or Triple Tube Lamps

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

F R A M E - I N K I T

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum low iridescent reflector with self trimming flanged splay/lens holder and white painted flange (standard). Polished Flange available. Safety chain provided.

F E A T U R E S14 7/8˝

14 1/2˝

10 1/2˝

61/4˝

7 3/4˝

L E N S E D

Lens Options 7211 Tempered Clear 7214 Tempered Prismatic 7216 Fresnel 7219 Drop Opal

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

10 1/2˝

61/4˝7 3/4˝

7˝ Aperture

R E F L E C T O R K I T

7˝ V

ER

TIC

AL

FL

UO

RE

SC

EN

T

7VF

8

ORDERING INFORMATION EXAMPLE: 7VF113E1-2-7211SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerEM - Emergency BatteryPF - Polished Flange DGSK - Silicone-Sealed Lens & Gasketing

Reflector

Lensed7211 7214 7216 7219

Lensed Baffled

7221 7224 7226 7229

Opal Acrylic Dome Shower

Light7215

Options

3FR

EMPF

DGSK

Finish

SCL SGC ECL WHT

Baffle

/BL /WH

7215 Opal Acrylic Dome Shower Light

Finish Options

Options10 1/2˝

8˝

O P A L A C R Y L I C D O M E S H O W E R L I G H T7˝ Aperture

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

Housing Part Number

7VF113E1-27VF118E1-2

7VF126-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x131x18

1x26, 1x32, 1x42* Fixture suitable for Quad

or Triple Tube Lamps

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Lens Options 7221 Tempered Clear 7224 Tempered Prismatic 7226 Fresnel 7229 Drop Opal

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

10 1/2˝

61/4˝7 3/4˝

L E N S E D B A F F L E D7˝ Aperture

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 9

8˝

VE

RT

ICA

L F

LU

OR

ES

CE

NT

8VF

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange (standard). Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

10 3/4˝

71/2˝8 3/4˝

R E F L E C T O R K I T

ORDERING INFORMATION EXAMPLE: 8VF113E1-2-8200SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Emergency Battery w/ Internal Mounted Test Switch GSK - Neoprene Foam Gasketing

Options

3FR

PF EMEMIGSK

Reflector

Open8200

Open Baffled8250

Wall Wash8102

Finish

SCL SGC ECL WHT

Baffle

/BL /WH

O P E N

8200 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

10 3/4˝

71/2˝8 3/4˝

8˝ Aperture

O P E N B A F F L E D

8250 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

10 3/4˝

71/2˝8 3/4˝

8˝ Aperture

W A L L W A S H

8102 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

10 3/4˝

71/2˝8 3/4˝

8˝ Aperture

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 7 7/8˝

Housing Part Number

8VF113E1-28VF118E1-2

8VF126-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x131x18

1x26, 1x32, 1x42* Fixture suitable for Quad

or Triple Tube Lamps

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M

8˝ V

ER

TIC

AL

FL

UO

RE

SC

EN

T

8VF

10

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed socket.

Heavy gauge spun aluminum low iridescent reflector with self trimming flanged splay/lens holder and white painted flange (standard). Polished Flange available. Safety chain provided.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

10 3/4˝

71/4˝8 5/8˝

R E F L E C T O R K I T

8221 Tempered Clear 8224 Tempered Prismatic 8226 Fresnel

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options71/4˝

8 5/8˝

L E N S E D B A F F L E D8˝ Aperture

10 3/4˝

L E N S E D

8211 Tempered Clear 8214 Tempered Prismatic 8216 Fresnel

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

8˝ Aperture

10 3/4˝

71/4˝8 5/8˝

ORDERING INFORMATION EXAMPLE: 8VF113E1-2-8211SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - Remodeler

EM - Emergency Battery PF - Polished FlangeDGSK - Silicone-Sealed Lens & Gasketing

Reflector

Lensed8211 8214 8216

Lensed Baffled

8221 8224 8226

Cross Baffle8035

Options

3FR

EMPF

DGSK

Baffle

/BL/WH

Finish

SCLSGC ECL WHT

8035 Cross Baffle

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

C R O S S B A F F L E8˝ Aperture

10 3/4˝

71/4˝8 5/8˝

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 7 7/8˝

Housing Part Number

8VF113E1-28VF118E1-2

8VF126-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x131x18

1x26, 1x32, 1x42* Fixture suitable for Quad

or Triple Tube Lamps

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 11

6˝

HO

RIZ

ON

TA

L F

LU

OR

ES

CE

NT

6HF

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

5 5/8˝

61/4˝

71/2˝

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Internal Mounted Emergency Test Switch GSK - Neoprene Foam Gasketing

ORDERING INFORMATION EXAMPLE: 6HF113E1-2-6600SCL

6650 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

O P E N B A F F L E D6˝ Aperture

5 5/8˝

61/4˝71/2˝

6700 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

5 5/8˝

W A L L W A S H6˝ Aperture

61/4˝71/2˝

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Reflector

Open6600

Open Baffled6650

Wall Wash6700

Options

3FRPF EMEMIGSK

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Ceiling Cut Out 6 3/4˝

Housing Part Number

6HF113E1-26HF213E1-26HF118E1-26HF218E1-2

6HF126-42E1-26HF226E1-2

Electronic 120-277 volt is standard*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x132x131x182x18

1x26, 1x32, 1x422x26

1-Lamp only for Triple Tube

6600 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

O P E N6˝ Aperture

5 5/8˝

61/4˝71/2˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M12

6˝ H

OR

IZO

NT

AL

FL

UO

RE

SC

EN

T

6HF

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming flanged splay/lens holder and white painted flange. Polished Flange available. Safety chain provided.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

5 5/8˝

6 1/4˝

7 1/2˝

6611 Tempered Clear 6614 Tempered Prismatic 6616 Fresnel 6619 Drop Opal

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

L E N S E D6˝ Aperture

5 5/8˝

6 1/4˝7 1/2˝

6621 Tempered Clear 6624 Tempered Prismatic 6626 Fresnel 6629 Drop Opal

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

6˝ ApertureL E N S E D B A F F L E D

5 5/8˝

6 1/4˝7 1/2˝

ORDERING INFORMATION EXAMPLE: 6HF113E1-2-6611SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerEM - Emergency BatteryPF - Polished FlangeDGSK - Silicone-Sealed Lens & Gasketing

Reflector

Lensed6611 6614 6616 6619

Lensed Baffled

6621 6624 6626 6629

Cross Baffled

6665

Options

3FR

EMPF

DGSK

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

6665 Cross Baffle

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

6˝ ApertureC R O S S B A F F L E

5 5/8˝

6 1/4˝7 1/2˝

Ceiling Cut Out 6 3/4˝

Housing Part Number

6HF113E1-26HF213E1-26HF118E1-26HF218E1-2

6HF126-42E1-26HF226E1-2

Electronic 120-277 volt is standard*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x132x131x182x18

1x26, 1x32, 1x422x26

1-Lamp only for Triple Tube

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 13

7˝

HO

RIZ

ON

TA

L F

LU

OR

ES

CE

NT

7HF

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

61/2˝

6 1/2˝

73/4˝

R E F L E C T O R K I T

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Internal Mounted Emergency Test SwitchGSK - Neoprene Foam Gasketing

ORDERING INFORMATION EXAMPLE: 7HF113E1-2-7600SCL

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Reflector

Open7600

Open Baffled7650

Wall Wash7700

Options

3FRPFEMEMIGSK

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

O P E N B A F F L E D

7650 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

PF Polished Flange

7˝ Aperture

61/2˝

6 1/2˝73/4˝

Ceiling Cut Out 6 3/4˝

Housing Part Number

7HF113E1-27HF213E1-27HF118E1-27HF218E1-2

7HF126-42E1-27HF226E1-2

Electronic 120-277 volt is standard*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x132x131x182x18

1x26, 1x32, 1x422x26

1-Lamp only for Triple Tube

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

O P E N7˝ Aperture

7600 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

6 1/2˝73/4˝

61/2˝

W A L L W A S H7˝ Aperture

7700 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

61/2˝

6 1/2˝73/4˝

Project Name: Type:

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming flanged splay/lens holder and white painted flange. Polished Flange available. Safety chain provided.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

61/2˝

73/4˝

6 1/2˝

ORDERING INFORMATION EXAMPLE: 7HF113E1-2-7611SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerEM - Emergency BatteryPF - Polished Flange DGSK - Silicone-Sealed Lens & Gasketing

Reflector

Lensed7611 7614 7616 7619

Lensed Baffled

7621 7624 7626 7629

Opal Acrylic Dome

Shower Light7615

Options

3FR

EMPF

DGSK

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

7621 Tempered Clear 7624 Tempered Prismatic 7626 Fresnel 7629 Drop Opal

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

L E N S E D B A F F L E D7˝ Aperture

6 1/2˝

61/2˝73/4˝

7615 Opal Acrylic Dome Shower Light

Finish Options

Options

O P A L A C R Y L I C D O M E S H O W E R L I G H T7˝ Aperture

8˝

6 1/2˝

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

Housing Part Number

7HF113E1-27HF213E1-27HF118E1-27HF218E1-2

7HF126-42E1-27HF226E1-2

Electronic 120-277 volt is standard*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x132x131x182x18

1x26, 1x32, 1x422x26

1-Lamp only for Triple Tube

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

L E N S E D

7611 Tempered Clear 7614 Tempered Prismatic 7616 Fresnel 7619 Drop Opal

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

7˝ Aperture

6 1/2˝

61/2˝73/4˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M14

7˝ H

OR

IZO

NT

AL

FL

UO

RE

SC

EN

T

7HF

15

8˝

HO

RIZ

ON

TA

L F

LU

OR

ES

CE

NT

8HF

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Housing Part Number

8HF113E1-28HF213E1-28HF118E1-28HF218E1-2

8HF126-42E1-28HF226E1-2

Electronic 120-277 volt is standard*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x132x131x182x18

1x26, 1x32, 1x422x26

1-Lamp only for Triple Tube

ORDERING INFORMATION EXAMPLE: 8HF313E1-2-8601SCL

Reflector

Open8600

Open Baffled8650

Wall Wash8700

Cross Baffle8665

Options

3FRPFEMEMIGSK

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Internal Mounted Emergency Test SwitchGSK - Neoprene Foam Gasketing

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

67/8˝

71/2˝

8 3/4˝

R E F L E C T O R K I T

O P E N

8600 OpenFinish OptionsSCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White ReflectorOptionsPF Polished Flange

8˝ Aperture

67/8˝

71/2˝8 3/4˝

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

W A L L W A S H 8˝ Aperture

8700 Wall WashFinish OptionsSCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White ReflectorOptionsPF Polished Flange

67/8˝

71/2˝8 3/4˝

C R O S S B A F F L E

8665 Cross BaffleFinish OptionsSCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White ReflectorOptionsPF Polished Flange

8˝ Aperture

67/8˝

71/2˝8 3/4˝

Ceiling Cut Out 7 7/8˝

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

O P E N B A F F L E D

8650 Open BaffledFinish OptionsSCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black BaffleOptions

8˝ Aperture

67/8˝

71/2˝8 3/4˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M16

8˝ H

OR

IZO

NT

AL

FL

UO

RE

SC

EN

T

8HF

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

67/8˝

71/4

8 1/2˝

R E F L E C T O R K I T

L E N S E D

8611 Tempered Clear 8614 Tempered Prismatic 8616 Fresnel

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

8˝ Aperture

6 7/8˝

71/4˝8 1/2˝

8621 Tempered Clear 8624 Tempered Prismatic 8626 Fresnel

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

L E N S E D B A F F L E D8˝ Aperture

67/8˝

71/4˝8 1/2˝

ORDERING INFORMATION EXAMPLE: 8HF113E1-2-8611SCL

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - Remodeler

EM - Emergency BatteryPF - Polished FlangeDGSK - Silicone-Sealed Lens & Gasketing

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Reflector

Lensed8611 8614 8616

Lensed Baffled8621 8624 8626

Options

3FR

EMPF

DGSK

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 7 7/8˝

Housing Part Number

8HF113E1-28HF213E1-28HF118E1-28HF218E1-2

8HF126-42E1-28HF226E1-2

Electronic 120-277 volt is standard*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

1x132x131x182x18

1x26, 1x32, 1x422x26

1-Lamp only for Triple Tube

T U R B O L O U V E R8˝ Aperture

8676 Turbo Louver

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

67/8˝

71/2˝8 3/4˝

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

Housing Part Number

8THF218E1-28THF226E1-2

8THF232-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

2x182x26

2x32, 2x42

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 17

8˝

HO

RIZ

ON

TA

L F

LU

OR

ES

CE

NT

8THFR E F L E C T O R K I T

O P E N

8601 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

2 LT, Triple Tube 8˝ Aperture

67/8˝

71/2˝8 3/4˝

O P E N B A F F L E D

8651 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

2 LT, Triple Tube 8˝ Aperture

67/8˝

71/2˝8 3/4˝

W A L L W A S H

8701 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

2 LT, Triple Tube 8˝ Aperture

67/8˝

71/2˝8 3/4˝

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

6 7/8˝

7 1/2˝

8 3/4˝

Reflector

Open8601

Open Baffled8651

Wall Wash8701

Options

3FRPFEMEMIGSK

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - RemodelerPF - Polished Flange

EM - Emergency BatteryEMI - Internal Mounted Emergency Test SwitchGSK - Neoprene Foam Gasketing

ORDERING INFORMATION EXAMPLE: 8THF218E1-2-8601SCL

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 7 7/8˝

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M18

8˝ H

OR

IZO

NT

AL

FL

UO

RE

SC

EN

T

8THF

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function.

L E N S E D

8681 Tempered Clear 8684 Tempered Prismatic 8686 Fresnel

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

2 LT, Triple Tube 8˝ Aperture

67/8˝

71/4˝8 1/2˝

8641 Tempered Clear 8644 Tempered Prismatic 8646 Fresnel

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

L E N S E D B A F F L E D2 LT, Triple Tube 8˝ Aperture

7 1/4˝8 1/2˝

6 7/8˝Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

67/8˝

7 1/4˝

8 1/2˝

ORDERING INFORMATION EXAMPLE: 8THF218E1-2-8681SCL

Reflector

Lensed8681 8684 8686

Lensed Baffled

8641 8644 8646

Options

3F

PFEM

DGSK

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedPF - Polished Flange

EM - Emergency Battery DGSK - Silicone-Sealed Lens & Gasketing

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 7 7/8˝

Housing Part Number

8THF218E1-28THF226E1-2

8THF232-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

2x182x26

2x32, 2x42

s See Options pages for other options and finishes.

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 19

8˝

HO

RIZ

ON

TA

L F

LU

OR

ES

CE

NT

8THF

Housing Part Number

8THF218E1-28THF226E1-2

8THF232-42E1-2Electronic 120-277 volt is standard

*347 Volt Replace 1-2 with 3

# of Lamps x Wattage

2x182x26

2x32, 2x42

Finish

SCLSGC ECLWHT

C R O S S B A F F L E

8695 Cross Baffle

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

2 LT, Triple Tube 8˝ Aperture

67/8˝

71/4˝8 1/2˝

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Electronic ballast, Class P, 50/60 HZ-120-277, Programmed Start, thermally protected, 98% Power Factor, 1.00 Ballast Factor, <10% THD, Class A sound rated. Minimum starting temperature -18°C/0°F. UL Listed component.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring.

Aluminum socket housing with quick assembly hardware for fast assembly. UL Listed socket and electrical connectors.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

6 7/8˝

71/4˝

8 1/2˝

Reflector

Cross Baffle8695

Turbo Louver8696

Options

3FR

EMPF

GSK

Dimming Ballast OptionsDL - Lutron Eco System (120-277 volt)DAX1 - Advance Mark X (120 volt)DAX2 - Advance Mark X (277 volt)DA7 - Advance Mark VII (120-277 volt)

Options Descriptions3 - 347 Volt F - FusedR - Remodeler

EM - Emergency BatteryPF - Polished Flange GSK - Neoprene Foam Gasketing

ORDERING INFORMATION EXAMPLE: 8THF113E1-2-8695SCL

Replace E1-2 with DL, DAX1, DAX2, or DA7 for dimmingDL - Lutron Dimming Specify Wattage

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

T U R B O L O U V E R

8696 Turbo Louver

Finish Options

SCL Specular Clear “Alzak” WHT White Reflector

Options

PF Polished Flange

2 LT, Triple Tube 8˝ Aperture

67/8˝

71/4˝8 3/4˝

Ceiling Cut Out 7 7/8˝

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M20

5˝ C

OM

ME

RC

IAL

INC

AN

DE

SC

EN

T

5INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Lensed reflector has a heavy gauge spun aluminum low iridescent reflector with self trimming flange spaly/lens holder and white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

12 1/2˝

14 1/2˝

6 7/8˝

5˝6 3/8˝

R E F L E C T O R K I TO P E N

5300 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

5˝ Aperture

6 7/8˝

5˝6 3/8˝

5350 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SGC/WH Soft Glow Clear with White Baffle ECL/WH Etch Clear with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

O P E N B A F F L E D 5˝ Aperture

6 7/8˝

5˝6 3/8˝

5310 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

W A L L W A S H 5˝ Aperture

6 7/8˝

5˝6 3/8˝

Reflector

Open5300

Open Baffled5350

Wall Wash5310

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange GSK - Neoprene Foam Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

EXAMPLE: 5INC-5300SCLORDERING INFORMATION

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 5 5/8˝

Housing Part Number

5INC

Wattage

100 A19 (MAX)

75 PAR30D

D Long Neck Only

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 21

5˝

CO

MM

ER

CIA

L I

NC

AN

DE

SC

EN

T

5INCF R A M E - I N K I T

Housing Part Number

5INC

Wattage

100 A19 (MAX)

75 PAR30D

D Long Neck Only

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

R E F L E C T O R K I T

12 1/2˝

14 1/2˝

9 1/4˝

5 ˝6 3/8˝

Reflector

Open5500

Open Baffled 5550

Wall Wash 5510

Options DescriptionsR - RemodelerPF - Polished Flange GSK - Neoprene Foam Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 5INC-5500SCL

5500 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

O P E NDeep 5˝ Aperture

5 ˝6 3/8˝

91/4˝

O P E N B A F F L E D

5550 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SGC/WH Soft Glow Clear with White Baffle ECL/WH Etch Clear with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

Deep 5˝ Aperture

9 1/4˝

5 ˝6 3/8˝

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Options

RPF

DGSK277 SD347 SD

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

W A L L W A S H

5510 Wall Wash

Finish Options

SCL Specular Clear “Alzak”

Options

PF Polished Flange

Deep 5˝ Aperture

9 1/4˝

5 ˝6 3/8˝

Ceiling Cut Out 5 5/8˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M22

5˝ C

OM

ME

RC

IAL

INC

AN

DE

SC

EN

T

5INC

5511 Tempered Clear 5514 Tempered Prismatic 5516 Fresnel

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

L E N S E DDeep 5˝ Aperture

9 1/4˝

4 3/4˝6 ˝

F R A M E - I N K I T

Housing Part Number

5INC

Wattage

60 A19 (MAX)

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

R E F L E C T O R K I T

12 3/4˝

14 1/2˝

9 1/4˝

4 3/4˝6 ˝

Reflector

Lensed5511 5514 5516

Lensed5311 5314 5316

Options DescriptionsR - RemodelerPF - Polished Flange DGSK - Silicone-Sealed Lens & Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 5INC-5500SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Options

RPF

DGSK277 SD347 SD

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Ceiling Cut Out 5 5/8˝L E N S E D 5˝ Aperture

5311 Tempered Clear 5314 Tempered Prismatic 5316 Fresnel

Finish Options SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

6 7/8˝

4 3/4˝6˝

Project Name: Type:

Housing Part Number

6INC

Wattage

150 A21 (MAX)100 PAR3090 PAR38

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 23

6˝

CO

MM

ER

CIA

L I

NC

AN

DE

SC

EN

T

6INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

8 3/4˝

6 1/4˝

71/2˝

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

O P E N

6000 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

6˝ Aperture

8 3/4˝

6 1/4˝7 1/2˝

O P E N B A F F L E D

6050 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

6˝ Aperture

8 3/4˝

6 1/4˝7 1/2˝

6102 Wall Wash

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear

Options

PF Polished Flange

W A L L W A S H 6˝ Aperture

8 3/4˝

6 1/4˝7 1/2˝

Reflector

Open 6000

Open Baffled 6050

Wall Wash 6102

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished FlangeGSK - Neoprene Foam Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 6INC-6000SCL

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M24

6˝ C

OM

ME

RC

IAL

INC

AN

DE

SC

EN

T

6INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming flanged splay/lens holder and white painted flange. Polished Flange available. Safety chain provided.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

8 3/4˝

5 3/4˝

7 ˝

L E N S E D

6011 Tempered Clear 6014 Tempered Prismatic 6016 Fresnel 6019 Drop Opal

Finish Options SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

6˝ Aperture

8 3/4˝

5 3/4˝7 ˝

6021 Tempered Clear 6024 Tempered Prismatic 6026 Fresnel 6029 Drop Opal

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

Polish Flange Not Available

L E N S E D B A F F L E D6˝ Aperture

83/4˝

5 3/4˝7 ˝

Reflector

Lensed6011 6014 6016 6019

Lensed Baffled

6021 6024 6026 6029

Options

RPF

DGSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange DGSK - Silicone-Sealed Lens & Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 6INC-6011SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

Housing Part Number

6INC

Wattage

100 A19 (MAX)

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 25

6˝

CO

MM

ER

CIA

L I

NC

AN

DE

SC

EN

T

6INC-HOR

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function.

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket housing. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum shallow low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

R E F L E C T O R K I T

O P E N

6602 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

Horizontal, Shallow 6˝ Aperture

5 5/8˝

6 1/4˝7 1/2˝

Reflector

Open6602

Open Baffled6652

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange GSK - Neoprene Foam Gasketing 277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 6INCHOR-6602SCL

5 5/8˝

7 1/2˝6 1/4˝

Ceiling Cut Out 6 3/4˝

Housing Part Number

6INC-HOR

Wattage

100 A19 (MAX)

O P E N B A F F L E D

6652 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

Horizontal, Shallow 6˝ Aperture

5 5/8˝

6 1/4˝7 1/2˝

Project Name: Type:

Housing Part Number

7INC

Wattage

150 A21 (MAX)100 A19

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M26

7˝ C

OM

ME

RC

IAL

INC

AN

DE

SC

EN

T

7INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

101/2˝

61/2˝

7 3/4˝

Reflector

Open7000

Open Baffled7050

Wall Wash7102

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished FlangeGSK - Neoprene Foam Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

O P E N

7000 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

7˝ Aperture

10 1/2˝

6 1/2˝7 3/4˝

O P E N B A F F L E D

7050 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

7˝ Aperture

10 1/2˝

6 1/2˝7 3/4˝

ORDERING INFORMATION EXAMPLE: 7INC-7000SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

W A L L W A S H

7102 Wall Wash

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear

Options

PF Polished Flange

7˝ Aperture

6 1/2˝7 3/4˝

101/2˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 27

7˝

CO

MM

ER

CIA

L I

NC

AN

DE

SC

EN

T

7INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

R E F L E C T O R K I T

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming flanged splay/lens holder and white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

10 7/8˝

5 3/4˝7 1/2˝

L E N S E D

7011 Tempered Clear 7014 Tempered Prismatic 7016 Fresnel 7019 Drop Opal

Finish Options SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

7˝ Aperture

5 3/4˝7 1/2˝

10 7/8˝

Reflector

Lensed7011 7014 7016 7019

Lensed Baffled

7021 7024 7026 7029

Opal Dome Shower Light

7015

Options

RPF

DGSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange DGSK - Silicone-Sealed Lens & Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 7INC-7011SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

7015 Shower Light

Finish Options

Options

O P A L D O M E S H O W E R L I G H T7˝ Aperture

10 7/8˝

8˝

L E N S E D B A F F L E D7˝ Aperture

10 7/8˝

5 3/4˝7 1/2˝

7021 Tempered Clear 7024 Tempered Prismatic 7026 Fresnel 7029 Drop Opal

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

Polish Flange Not Available

Ceiling Cut Out 6 3/4˝

Housing Part Number

7INC

Wattage

100 A19 (MAX)

Project Name: Type:

Housing Part Number

7INC

Wattage

150 A21 (MAX)150 PAR38120 BR40

100 PAR30

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M28

7˝ C

OM

ME

RC

IAL

INC

AN

DE

SC

EN

T

7INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum shallow low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T R E F L E C T O R K I T

14 7/8˝

14 1/2˝

8 1/8˝

61/2˝

7 3/4˝

O P E N

7300 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

Shallow 7˝ Aperture

81/8˝

61/2˝7 3/4˝

O P E N B A F F L E D

7350 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

Shallow 7˝ Aperture

81/8˝

61/2˝7 3/4˝

Reflector

Open7300

Open Baffled7350

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange GSK - Neoprene Foam Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 7INC-7300SCL

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 6 3/4˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 29

7˝

CO

MM

ER

CIA

L I

NC

AN

DE

SC

EN

T

7INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

/SCL/SGC

R E F L E C T O R K I T

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Glazed porcelain UL Listed socket mounted to steel yoke swivel assembly. Yoke tilt is 35° and will swivel 358°.

Heavy gauge hydroformed aluminum housing with spun aluminum aperture cone and self trimming white painted flange.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

8˝

61/4˝

7 3/4˝

O P E N

7810 Open Adjustable

Finish Options

WHT/SCL Specular Clear “Alzak” Cone with White Housing and White Flange WHT/SGC Soft Glow Clear Cone with White Housing and White Flange

Options

Polish Flange Not Availabe.

Adjustable 7˝ Aperture

8˝

7 3/4˝6 1/4˝

O P E N B A F F L E D

7850 Open Baffled

Finish Options

WHT/BL White Housing with Black Baffle WHT/WH White Housing with White Baffle

Options

Polish Flange Not Availabe.

Adjustable 7˝ Aperture

8˝

7 3/4˝6 1/4˝

Reflector

Open7810

Open Baffled7850

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange GSK - Neoprene Foam Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 7INC-7810WHT/SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Housing

WHT

Ceiling Cut Out 6 3/4˝

Housing Part Number

7INC

Wattage

150 A21 (MAX)150 PAR38120 BR40

100 PAR30

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M30

7˝ C

OM

ME

RC

IAL

INC

AN

DE

SC

EN

T

7INC-HOR

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket housing. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum shallow low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

R E F L E C T O R K I T

Reflector

Open7602

Open Baffled7652

Lensed7661 7664 7666

Lensed Baffled

7671 7674 7676

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange GSK - Neoprene Foam Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 7INCHOR-7602SCL

6 3/8˝

7 3/4˝

6 1/2˝

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

L E N S E DHorizontal 7˝ Aperture

7661 Tempered Clear 7664 Tempered Prismatic 7666 FresnelFinish OptionsSCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White ReflectorOptions PF Polished Flange

6 3/8˝

6 1/4˝7 3/4˝

L E N S E D B A F F L E DHorizontal 7˝ Aperture

7671 Tempered Clear 7674 Tempered Prismatic 7676 FresnelFinish OptionsSCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White BaffleOptions

6 3/8˝

6 1/4˝7 3/4˝

Ceiling Cut Out 6 3/4˝

Housing Part Number

7INC-HOR

Wattage

100 A19 (MAX)

O P E NHorizontal 7˝ Aperture

7602 Open Finish OptionsSCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White ReflectorOptionsPF Polished Flange

6 3/8˝

6 1/2˝7 3/4˝

O P E N B A F F L E D

7652 Open BaffledFinish OptionsSCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black BaffleOptions

Horizontal 7˝ Aperture

6 3/8˝

6 1/2˝7 3/4˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 31

8˝

CO

MM

ER

CIA

L I

NC

AN

DE

SC

EN

T

8INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

10 3/4˝

7 1/2˝8 3/4˝

R E F L E C T O R K I T

O P E N

8000 Open

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

8˝ Aperture

10 3/4˝

7 1/2˝8 3/4˝

O P E N B A F F L E D

8050 Open Baffled

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black Baffle

Options

8˝ Aperture

10 3/4˝

7 1/2˝8 3/4˝

8102 Wall Wash

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear

Options

PF Polished Flange

W A L L W A S H 8˝ Aperture

10 3/4˝

7 1/2˝8 3/4˝

Reflector

Open 8000

Open Baffled 8050

Wall Wash 8102

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange GSK - Neoprene Foam Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 8INC-8000SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 7 7/8˝

Housing Part Number

8INC

Wattage

200 A23 (MAX)

150 PAR38

100 PAR30

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M32

8˝ C

OM

ME

RC

IAL

INC

AN

DE

SC

EN

T

8INC

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

R E F L E C T O R K I T

L E N S E D

8011 Tempered Clear 8014 Tempered Prismatic 8016 Fresnel

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

8˝ Aperture

10 3/4˝

7 1/4˝8 5/8˝

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket cup with spring steel snap-in clips for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum low iridescent reflector with self trimming flanged splay/lens holder and white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

10 3/4˝

7 1/4˝85/8˝

Reflector

Lensed8011 8014 8016

Lensed Baffled

8021 8024 8026

Cross Baffle8035

Options

RPF

DGSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange DGSK - Silicone-Sealed Lens & Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 8INC-8011SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

Ceiling Cut Out 7 7/8˝

Housing Part Number

8INC

Wattage

150 A21 (MAX)

8021 Tempered Clear 8024 Tempered Prismatic 8026 Fresnel

Finish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle

Options

L E N S E D B A F F L E D8˝ Aperture

10 3/4˝

7 1/4˝8 5/8˝

8035 Cross Baffle

Finish Options

SCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White Reflector

Options

PF Polished Flange

C R O S S B A F F L E8˝ Aperture

7˝81/2˝

10 3/4˝

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M 33

8˝

CO

MM

ER

CIA

L I

NC

AN

DE

SC

EN

T

8INC-HOR

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket housing for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum horizontal low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

R E F L E C T O R K I T

O P E N B A F F L E DHorizontal 8˝ Aperture

8652 Open BaffledFinish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White Baffle WHT/WH White Reflector with White Baffle WHT/BL White Reflector with Black BaffleOptions

71/2˝

7 1/2˝8 3/4˝

O P E NHorizontal 8˝ Aperture

8602 OpenFinish OptionsSCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White ReflectorOptionsPF Polished Flange

71/2˝

7 1/2˝8 3/4˝

Reflector

Open8602

Open Baffled8652

Options

RPF

GSK277 SD347 SD

Options DescriptionsR - RemodelerPF - Polished Flange GSK - Neoprene Foam Gasketing 277V SD - Step Down Transformer347V SD - Step Down Transformer

ORDERING INFORMATION EXAMPLE: 8INCHOR-8602SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

7 1/2˝

8 3/4˝

71/2˝

Ceiling Cut Out 7 7/8˝

Housing Part Number

8INC-HOR

Wattage

200 A21 (MAX)

150 A21

Project Name: Type:

V A N T A G E L I G H T I N G I N C V A N T A G E L T G . C O M34

8˝ C

OM

ME

RC

IAL

INC

AN

DE

SC

EN

T

8INC

Baffle

/BL/WH

Finish

SCLSGC ECLWHT

Electrogalvanized steel frame components with spring steel reflector clips for fast assembly of reflector. Innovative, rigid bar hangers incorporate formed cross sections, joist positioning tabs, integral nails, auxiliary nailholes, T-Bar slots and holes for locking bars to T-Bar using #8 self-tapping screws (supplied by others). Bars extend 14˝-24˝. Frame will also accept Caddy Bar #517B for fast installation in drop-in ceilings, bars extend 27˝.

Heavy gauge electrogalvanized steel junction box, prewired and grounded with easy access from below. Listed for through branch circuit wiring. Thermal cutout provided.

Aluminum socket housing for fast assembly. UL Listed medium base porcelain socket, with nickel plated brass screw shell.

Heavy gauge spun aluminum horizontal low iridescent reflector with self trimming white painted flange. Polished Flange available.

F E A T U R E S

F R A M E - I N K I T

14 7/8˝

14 1/2˝

R E F L E C T O R K I T

Reflector

Lensed8661 8664 8666

Lensed Baffled

8671 8674 8676

Options

RPF

DGSK277 SD347 SD

ORDERING INFORMATION EXAMPLE: 8INCHOR-8661SCL

Features Manufactured and Listed to UL 1598, ETL and CSA standards. Suitable for Damp Locations. Wet location under covered ceiling.

L E N S E D B A F F L E DHorizontal 8˝ Aperture

8671 Tempered Clear 8674 Tempered Prismatic 8676 FresnelFinish Options

SCL/BL Specular Clear “Alzak” with Black Baffle SCL/WH Specular Clear “Alzak” with White BaffleOptions

Polish Flange Not Available.

71/2˝

7 1/4˝8 5/8˝

L E N S E DHorizontal 8˝ Aperture

8661 Tempered Clear 8664 Tempered Prismatic 8666 FresnelFinish OptionsSCL Specular Clear “Alzak” SGC Soft Glow Clear ECL Etch Clear WHT White ReflectorOptionsPF Polished Flange

71/2˝

7 1/4˝8 5/8˝

7 1/4˝

8 5/8˝

71/2˝

Ceiling Cut Out 7 7/8˝

Housing Part Number

8INC-HOR

Wattage

200 A21 (MAX)

150 A21

Vantage reserves the right to change components, finishes or design details in any manner which does not alter the installed appearance or reduce performance and intended function. s See Options pages for other options and finishes.

Options DescriptionsR - RemodelerPF - Polished Flange DGSK - Silicone-Sealed Lens & Gasketing277V SD - Step Down Transformer347V SD - Step Down Transformer

Project Name: Type: