metal dowels,rollers bearings(5x5, 5x8, 5x10,Al2O3 rollers 5.5x5.5,5....sion shafts, 5x23.8, 5x25.8, 5x27.8, 5x29.8, 5x34.8, 5x39.8, 5x49.8)

metal dowels,rollers bearings(5x5, 5x8, 5x10,Al2O3 rollers 5.5x5.5,5.5x8, 5x15.8,precision needles,cylinder rollers, 5x17.8, 5x19.8, 5x21.8,grooved pins, precision shafts, 5x23.8, 5x25.8, 5x27.8, 5x29.8, 5x34.8, 5x39.8, 5x49.8)

Font: Normal mid large Print Close Bookmark

rods dowels,combined bearings(5x5, 5x8,5x10,aluminium oxide rollers 5.5x5.5,5.5x8, 5x15.8,precision needles,cylinder rollers, 5x17.8, 5x19.8, 5x21.8,grooved pins, precision shafts, 5x23.8, 5x25.8, 5x27.8, 5x29.8, 5x34.8, 5x39.8, 5x49.8)

In the case of bearing arrangements which

work in very limited space, , needle roller

bearings are frequently used without inner

rings, designation. In these cases the bearing

needles run directly on the shafts surface.

these running surfaces, however, must to be designed to the same quality standard as for

bearing rings,. since needle roller bearings allow for length compensation of a certain amount

within the bearing, they are optimum as non locating bearings.

we supply high quality rollers with hardened

steel,all of the rollers had hardened. usually,

the material of needle rollers and cylindrical

rollers, is chrome steel 52100(HRC60-65) or

stainless steel 420 (HRC53-56), the material of balls, is stainless steel

440C(HRC55-58).

in both inch and metric sizes. we also custom manufacture special dowel pins to your

specification, and will be pleased to offer our quotation upon receipt of your detailed

requirements.

more stock,such as diameter 2,3,4,5,6,7,8,8,10

(mm)etc. please E-mail to us. for continuously

updating every day, any detail of the rollers,

please send E-mail to us.

we also manufactures precision cylindrical rollers and needle rollers according to customer's

drawing.

stock of diameter 5(mm) series: dowels, rollers and pins,cylindrical rollers and needle rollers

● home

● products

● contact

● equipments

● steel balls

● capillary tubes

● cylindrical roller

● needle rollers

● ceramic rollers

● Si3N4 rollers

● ZrO2 rollers

● sizes or stocks

● D0.5mm series

● D1.0 series

● D1.5 series

● D2.0 series

● D2.5 series

● D3.0 series

● D3.5 series

● D4.0 series

● D5.0 series

● D6.0 series

● D7.0 series

● D8.0 series

● D9.0 series

● D10.0-D60.0 series

● 2x2, 3x3,

http://www.bearing-needle.com/5x5+5x10+cylin...x25.8+5x27.8+5x29.8+5x34.8+5x39.8+5x49.8.htm（第 1／2 页）[2016-1-29 0:04:52]

metal dowels,rollers bearings(5x5, 5x8, 5x10,Al2O3 rollers 5.5x5.5,5....sion shafts, 5x23.8, 5x25.8, 5x27.8, 5x29.8, 5x34.8, 5x39.8, 5x49.8)

loose needle rollers, precision dowels and pins,cylindrical rollersD*L Qty(pcs) D*L Qty(pcs) D*L Qty(pcs) D*L Qty(pcs)

5*3.3 2600 5*3.5 1200 5*4 15300 5*4.6 43000

5*4.8 500 5*5 52400 5*5.5 12502 5*6 219700

5*6SS 72100 5*7 32500 5*7.6 2000 5*8 62100

5*8.1 15300 5*9 22800 5*10 16800 5*10.5 17200

5*11 3340 5*11.5 5400 5*12SS 400 5*12 5800

5*13 15000 5*13.7 1800 5*13.8 6300 5*14 31100

5*14.25SS 3400 5*14.6 6200 5*15 25800 5*16 167000

5*17 35220 5*18 75000 5*19 1800 5*19.2 2100

5*20 26000 5*20.7 6900 5*20.8 40500 5*21 22000

5*22 1750 5*23 65220 5*24 35550 5*25 56600

5*25SS 300 5*25.5 1700 5*25.8 200 5*26 9900

5*27 10800 5*27.5 220 5*28 25500 5*29.8 3500

5*30SS 150 5*31.8 1025 5*32 352200 5*32.8 32300

5*33.8 6200 5*34 322000 5*35 35200 5*35.2 6940

5*36 352210 5*38 5410 5*39 54200 5*39.8 32100

5*40 2050 5*42 9300 5*43 2900 5*44 26670

5*45 44440 5*46 54540 5*48 4410 5*49.8 1980

5*50 5420 5*51.5 200 5*52 1200 5*54 1030

5*55 4400 5*57 44540 5*58 7740 5*60 4510

5*65 4000 5*70 1900 5*75 52500 5*80 4400

5*85 4400 5*90 8500 5*95 4400 5*98 4400

5*100 8740 5.015*20.7* 1700 5.05*18* 16300 5.1*15.8* 4400

5.15*15.8* 3400 5.2*15.8* 15000 5.3*15.8* 5000 5.5*5.5 23450

5.5*6 3100 5.5*8 2000 5.5*9 1980 5.5*10 1200

5.5*11 900 5.5*14 9850 5.5*15 3500 5.5*16 3600

5.5*18 5100 5.5*19 21800 5.5*20 19700 5.5*22 2100

5.5*24 1200 5.5*28 500 5.54*14* 400 5.66*18 3000

5.66*20 1250 5.66*30 1580 5.75*18* 1600 5.85*24 920

5.85*29.8 1380

needles and rollers,miniature pins,precision needles,miniature shafts,cylindrical rollers,dowels and pins,

4x4, 5x5, 6x6, 7x7, 8x8, 9x9

● 10x10, 11x11, 11x15, 12x14

● 13x13, 14x14, 15x15, 20x20

● 30x30, 40x40, 50x50, 60x60

needle rollers tapered rollers cylindrical rollers dowel pins grooved pins crowned rollers needle roller bearing copyright©2015 YDTech®

http://www.bearing-needle.com/5x5+5x10+cylin...x25.8+5x27.8+5x29.8+5x34.8+5x39.8+5x49.8.htm（第 2／2 页）[2016-1-29 0:04:52]