Embed Size (px)
Citation preview
[email protected] 090 2375www.swanngroupltd.com
6 RRU Support Frame (Face Mount)
The Free-standing RRU Support Frame is designed to accommodate multiple driver units on an independent frame. This eliminates the need to fit technology to any other part of the rooftop antenna support steelwork.
* Overall dimensions include allowance for the feet.
Benefits:• Compact and lightweight• Available in flat packed form, suitable for roof access• Adjustable feet to accommodate variations in roof height• Designed to support up to six rear face mounted RRUs• Includes neoprene feet to avoid damage to roof treatment• No ballast required• Includes cable management rail• Complete with side mounting poles to support additional equipment
To discuss the Free-standing RRU Support Frame, contact our Customer Service Team on free phone 0800 090 2375 or email [email protected]
Length* Width Nominal Height Weight1,865mm 1,200mm 1,050mm 170kg
[email protected] 090 2375www.swanngroupltd.com
Technical Summary
Height of Rooftop Regions of the UK Covered
30m
Maximum Overturning Resistance = 0.95kNm
• London (Greater and Central)• East of England• West Midlands• East Midlands
20m
Maximum Overturning Resistance = 0.95kNm
• South East Scotland• North East England• Yorkshire and The Humber• North West England (>10km away from shoreline)• Southwest (>10km away from shoreline)• Wales (>10km away from shoreline)
Note: If sites fall outside the parameters set (i.e South coastal cities) then re-calculations will need to be made as there is an option to install ballast trays to the RRU Support Frame.
