Wi-Fi based data acquisition system using rabbit processor
Ethernet (web) based Data Acquisition and Controlling and
display on PCAbstract AIM:
aim of this project is collecting data from remote area. And
also controlling it through remote PC.Description :
Development of data acquisition is the process of gathering
signals from the remote sources and digitizing those signals for
storage, transmission and analysis. Data logging, carried out by a
data acquisition system (DAS), is used to measure real world
parameters in real time. In this system data logging systems
consist of measuring outputs (sensors)).A survey data acquisition
system acquires survey data regarding a subterranean structure.
Information is communicated between a survey receiver and a
concentrator. The communication uses a TCP/IP protocol based on a
Ethernet communications technology, where the wireless protocol
employs time division multiplexing in which a larger number of time
slots are assigned for uplink communication from the wireless
survey receiver to the wireless concentrator than for downlink
communication from the concentrator to the survey receiver.
In this project Rabbit processor RCM3700 collects the data
continuously, and sends to Modem at other end data is received by
Ehernet receiver and send to web-page at Pc it continently up dates
the different sensors data and controls values depends upon limited
values set.
BLOCK DIAGRAM:
HARDWARE:1. RCM37002. ADC
3. PCSOFTWARE:1. Dynamic-V10
2. Dynamic C -Programming
APPLICATION:1. It is used for collecting information.2. It
converts data into useful form.3. It is used in aircraft control
system.4. It is used in industrial process control system.
Power supply
REMOTE - PC
[TCP / IP ENABLED CLEINT]
Humidity Sensor
Temperature Sensor
ADC
INTERNET / LAN /
Rabbit processor
