62189Griggs Curriculum Vitae 2009-04-17.doc

CURRICULUM VITAE

PERSONAL INFORMATION

NAME: Jason Alan Griggs

TITLE: Associate Dean for Discovery, Innovation & Graduate Studies, School of Dentistry

Professor & Chair, Department of Biomedical Materials Science

Professor, Department of Orthopedic Surgery & Rehabilitation

DATE OF APPOINTMENT TO UMC: August 1, 2007

PLACE OF BIRTH: Rockledge, Florida

DATE OF BIRTH: June 24, 1970

LANGUAGE PROFICIENCY: English

CITIZENSHIP: U.S.

EDUCATION

1993 B.S., Materials Science, University of Florida, Gainesville, Florida

1996 M.S., Materials Science, University of Florida, Gainesville, Florida

1998 Ph.D., Materials Science, University of Florida, Gainesville, Florida

HONORS AND AWARDS

1995 Finest Oral Presentation in Physical Sciences, Graduate Student Council Forum, University of Florida

1998 Edward H. Hatton Award Finalist, American Association for Dental Research

2003 Mentor to Adam Benham: First Place, Student Poster Presentation, Baylor College of Dentistry Research Day

2004 First recipient of Basic Science Faculty Research Award, Baylor College of Dentistry

2004 Mentor to Chris Gerwig: Recipient of Bloc Travel Award, American Association for Dental Research

April 2009 Griggs, Jason A.

2004 Mentor to Clarisse Ng: Second Place, John J. Sharry Research Competition, American College of Prosthodontics

2004 Fellow, Academy of Dental Materials

2005 Mentor to Sophocles Voyiazis: Recipient of International Team for Implantology Research Fellowship, ITI Foundation

2006 Mentor to Linda Gruetter: Recipient of International Team for Implantology Research Fellowship, ITI Foundation

2006 Mentor to Clarisse Ng: Recipient of the Judson C. Hickey Scientific Writing Award, The Journal of Prosthetic Dentistry

PROFESSIONAL ORGANIZATIONS

1988 - 1990 Institute for Electronics & Electrical Engineering

1992 - Present American Ceramic Society

1994 - Present IADR/AADR

1995 - Present Keramos

1996 - Present Academy of Dental Materials

1998 - Present ADEA

1999 - Present Sigma Xi

NATIONAL AND INTERNATIONAL ACTIVITIES

1988 - 1990 Elected IEEE Representative to Benton Engineering Council, University of Florida

1998 Oral Session Chair, “Dental Ceramics: Materials and Wear Evaluation,” International Association for Dental Research

1998 - 2004 Appointed to Membership Chair of Academy of Dental Materials

1999 NIH/CSR Oral Biology and Medicine (OBM1) study section

2000 Oral Session Chair, “Biomechanics and Biomaterials,” Texas Mineralized Tissue Society

2001 Elected Vice-President, Dallas Chapter of IADR/AADR

2001 Oral Session Chair, “Alumina and Zirconia Ceramics,” International Association for Dental Research

2


2002 Elected President, Dallas Chapter of IADR/AADR

2002 - 2003 Elected to Board of Directors of Academy of Dental Materials

2003 Special Member, NIH/CSR Oral, Dental and Craniofacial Sciences (ODCS) study section

2003 Oral Session Chair, “Adhesion to Metal and Ceramic Substrates,” International Association for Dental Research

2003 - 2005 Appointed to Science Information Committee of AADR (Chair 2005)

2003 - 2005 Editorial Board, The Journal of Prosthetic Dentistry

2004 Oral Session Chair, “Ceramics: Reliability, Fatigue, and Modeling,” International Association for Dental Research

2004 NIH/CSR Oral and Dental Small Business Special Emphasis Panel

2004 - 2006 NIH/CSR Oral, Dental and Craniofacial Sciences (ODCS) study section

2004 - 2006 Elected Vice-President, Academy of Dental Materials

2006 - Present Editorial Board, Dental Materials


2006 Oral Session Chair, “Ceramic Crowns, Fracture, Layered Structures,” American Association for Dental Research

2006 - 2008 Elected President, Academy of Dental Materials

2007 Oral Session Chair, “Mechanical Testing and Failure Analysis of Ceramics,” International Association for Dental Research

2008 Oral Session Chair, “Stress, Fatigue, and Reliability of Ceramics,” International Association for Dental Research


2009 - Present NIH/CSR Oral, Dental and Craniofacial Sciences (ODCS) study section

PROFESSIONAL EXPERIENCE

1988 - 1993 Teaching Assistant, Department of Electrical Engineering, University of Florida, Gainesville, FL

3


1993 - 1998 Research Assistant, Department of Dental Biomaterials, University of Florida, Gainesville, FL

1998 - 2004 Assistant Professor, Department of Biomaterials Science, Baylor College of Dentistry, Dallas, TX

1998 - 2007 Graduate Program Director, Department of Biomaterials Science, Baylor College of Dentistry, Dallas, TX

2004 - 2007 Associate Professor, Department of Biomaterials Science, Baylor College of Dentistry, Dallas, TX

2005 - Present Owner and Consultant, Lone Star Reliability Engineering LLC, Brandon, MS

2006 - 2007 Vice-Chair, Department of Biomaterials Science, Baylor College of Dentistry, Dallas, TX

2007 Professor, Department of Biomaterials Science, Baylor College of Dentistry, Dallas, TX

2007 Professor & Vice-Chair, Department of Biomedical Materials Science, University of Mississippi Medical Center, Jackson, MS

2007 – Present Professor, Department of Orthopedic Surgery & Rehabilitation, University of Mississippi Medical Center, Jackson, MS

2008 - Present Professor & Chair, Department of Biomedical Materials Science, University of Mississippi Medical Center, Jackson, MS

2008 – Present Associate Dean for Discovery, Innovation & Graduate Studies, School of Dentistry, University of Mississippi Medical Center, Jackson, MS

2008 - Present Adjunct Professor, Department of Civil Engineering, University of Mississippi, Oxford, MS

GRANTS FUNDED

Principal InvestigatorSelf-Healing, Fracture-Resistant Restorative CeramicsBaylor Oral Health Foundation OHF99-09Direct costs: $48,677 Indirect costs: $0 Period: 5/99-5/00

Self-Healing, Fracture-Resistant Restorative CeramicsNIH/NIDCR R01 DE013358Direct costs: $425,000 Indirect costs: $166,484 Period: 1/02-12/04

Fatigue of Restorative CeramicsNIH/NIDCR R01 DE013358Direct costs: $1,091,250 Indirect costs: $404,125 Period: 2/06-1/11

4


Fatigue of Dental ImplantsNIH/NIDCR R01 DE017991Direct costs: $950,000 Indirect costs: $398,762 Period: 4/07-3/12

Co-Investigator or ConsultantDental Casting of Titanium AlloysNIH/NIDCR R01 DE011787 (PI: T. Okabe)Direct costs: $950,000 Indirect costs: $410,640 Period: 4/02-3/07

Calcium Phosphate Bioceramics from Calcium OlygophosphatesISTC (International Science and Technology Center) K-384 (PI: V. Sinyayev)Direct costs: $220,002 Indirect costs: $30,008 Period: 3/02-2/05

Enhanced Ozone Disinfection of Dental Unit WaterlinesNIH/NIDCR (subcontract from R43 DE012560) (PI: R. Puttaiah)Direct costs: $140,872 Indirect costs: $64,098 Period: 9/03-9/05

Prevention and Remediation of Biofilms in Dental UnitsNIH/NIDCR (subcontract from R43 DE014280) (PI: R. Puttaiah)Direct costs: $198,341 Indirect costs: $90,246 Period: 10/03-10/05

UT Southwestern Clinical Science Scholars ProgramNIH/NICHD K12 HD052225 (PI: M. Packer)Direct costs: $9,700,000 Indirect costs: Period: 9/05-7/10

Building a Tooth - The Chicago Blueprint for Dental RegenerationNIH/NIDCR P20 DE017447 (PI: T. Diekwisch)Direct costs: $50,000 Indirect costs: $27,500 Period: 1/06-7/06

Fatigue Sensitivity of Zirconia and Ti-6Al-4V Based Endosseous Dental ImplantsIndiana University (PI: B. Taskonak)Direct costs: $94,093 Indirect costs: $0 Period: 2/08-1/09

BOOKS/BOOK CHAPTERS

1. Griggs JA, Hill TJ, Gallagher SH, Schimmel T (1996). Low-friction total hip arthroplasties. In: Clinical Performance of Skeletal Prostheses. Hench LL, Wilson J, editors. New York: Chapman and Hall, pp. 11-32.

2. Griggs JA (2006). Ceramic-metal systems. In: Restorative Dental Materials, 12th ed. Powers JM, Sakaguchi RL, editors. St. Louis, MI: Mosby, pp. 465-478.

REFEREED ARTICLES

1. Griggs JA, Shen C, Anusavice KJ (1995). Sensitivity of catalyst/base ratio on curing of resin luting agents: Polymerization exotherm analysis. Dent Mater 10:314-318.

2. Griggs JA, Thompson JY, Anusavice KJ (1996). Effect of flaw size and auto-glaze treatment on porcelain strength. J Dent Res 75:1414-1417.

3. Yoda M, Konno T, Takada Y, Iijima K, Griggs J, Okuno O, Kimura K, Okabe T (2001). Bond strength of binary titanium alloys to porcelain. Biomaterials 22:1675-1681.

5


4. Griggs JA, Anusavice KJ, Mecholsky JJ Jr (2002). Devitrification and microstructural coarsening of a fluoride-containing barium aluminosilicate glass. J Mater Sci 37:2017-2022.

5. Sinyayev VA, Levchhenko LV, Shustikova ES, Griggs JA (2003). Calcium phosphates co-precipitated from water solutions of monophosphate and diphosphate. Russ J Appl Chem 76:529-532.

6. Griggs JA, Wataha JC, Kishen A (2003). Effect of hydrolyzed surface layer on the cytotoxicity and chemical resistance of a low fusing porcelain. Dent Mater 19:353-358.

7. Silina EN, Levchenko LV, Temiralieva GA, Kunitsa TN, Haua-Adam ST, Griggs J, Sinyayev VA (2003). Effect of calcium phosphates precipitated from water solutions of mono- and diphosphate on microbes. Proceedings of the National Academy of Sciences of Republic of Kazakhstan 22:60-66.

8. Griggs JA, Kishen A, Le KN (2003). Mechanism of strength increase for a hydrothermal porcelain. Dent Mater 19:625-631.

9. Blue DS, Griggs JA, Woody RD, Miller BH (2003). Effects of bur grit size and abutment composition on preparation of ceramic implant abutments. J Prosthet Dent 90:247-254.

10. Griggs JA, Zhang Y (2003). Determining the confidence intervals of Weibull parameters estimated using a more precise probability estimator. J Mater Sci Lett 22:1771-1773.

11. Zhang Y, Griggs JA (2003). Evaluation of failure probability estimators for cyclic fatigue using boundary technique. J Mater Sci Lett 22:1775-1777.

12. Sinyayev VA, Shustikova ES, Levchenko LV, Tokseitova GA, Griggs J (2003). Nature and behavior at heating of precipitated calcium-magnesium phosphates. Russ J Appl Chem 76:1415-1418.

13. Kunitsa TN, Silina EN, Shustikova ES, Tashmetov RT, Sedunov AA, Griggs J, Sinyayev VA (2003). Microbiological effect of calcium-magnesium phosphates precipitated from water solutions of monophosphate. Proceedings of the National Academy of Sciences of Republic of Kazakhstan 5:93-99.

14. Lee KM, Cai Z, Griggs JA, Guiatas L, Lee DJ, Okabe T (2004). SEM/EDS evaluation of porcelain adherence to gold-coated cast titanium. J Biomed Mater Res 68B:165-173.

15. Zhang Y, Griggs JA, Benham AW (2004). Influence of powder-liquid mixing ratio on porosity and translucency of dental porcelains. J Prosthet Dent 91:128-135.

16. Ng CCH, Al-Bayat MI, Dumbrigue HB, Griggs JA, Wakefield CW (2004). Effect of no ferrule on failure of teeth restored with bonded posts and cores. Gen Dent 52:143-146.

6


17. Pallis K, Griggs JA, Woody RD, Guillen GE, Miller AW (2004). Fracture resistance of three all-ceramic restorative systems for posterior applications. J Prosthet Dent 91:561-569.

18. El-Din A, Miller BH, Griggs JA (2004). Resin bonding to sclerotic non-carious cervical lesions. Quintessence Int 35:529-540.

19. Sinyayev VA, Griggs J, Shustikova ES, Dorofeev DV, Tokseitova GA (2004). Thermal behavior of precipitated amorphous calcium-magnesium phosphate. Chemical Journal of Kazakhstan (1):51-62.

20. Sinyayev VA, Shustikova ES, Griggs J, Dorofeev DV (2004). State of the chemical P-O bonds in amorphous substances produced via precipitation by calcium chloride from water solutions of monophosphate in the presence of diphosphate and magnesium. Chemical Journal of Kazakhstan (2):9-18.

21. Sinyayev VA, Griggs J, Dorofeev DV, Tokseitova GA (2004). Structure of the products formed at thermal decomposition of amorphous calcium-magnesium phosphate. Chemical Journal of Kazakhstan (2):188-194.

22. Sinyayev VA, Griggs J, Dorofeev DV, Shustikova ES (2004). Change of porosity of precipitated materials on the basis of calcium mono- and diphosphate after dehydration. Proceedings of the National Academy of Sciences of Kazakhstan (4):102-109.

23. Levchenko LV, Nurkina ZS, Griggs J, Sinyayev VA(2005). Amorphous calcium diphosphate production and transformation when heated. Chemical Journal of Kazakhstan 4:421-433.

24. Kim JW, Griggs JA, Regan JD, Ellis RA, Cai Z (2005). Effect of cryogenic treatment on nickel titanium endodontic files. Int Endo J 38:364-371.

25. Ng CCH, Dumbrigue HB, Al-Bayat MI, Griggs JA, Wakefield CW (2006). Incomplete ferrule: Effect of location of remaining tooth structure on the fracture resistance of endodontically treated teeth. J Prosthet Dent 95:290-296.

26. Nour El-din AK, Miller BH, Griggs JA (2006). Immediate bonding to bleached enamel. Oper Dent 31:106-114.

27. Saab XE, Griggs JA, Powers JM, Engelmeier RL (2007). Effect of abutment angulation on the strain on the bone around an implant in the anterior maxilla. J Prosthet Dent 97:85-92.

28. Allen MJ, Glickman J, Griggs JA (2007). Comparative analysis of endodontic pathfinders. J Endodont 33:723-726.

29. Griggs JA (2007). Recent advances in materials for all-ceramic restorations. Dent Clin N Am 51:713-727.

7


30. Taskonak B, Griggs JA, Mecholsky JJ Jr, Yan J-H (2008). Analysis of subcritical crack growth in dental ceramics using fracture mechanics and fractography. Dent Mater 24:700-707.

31. Bishop D, Griggs J, He J (2008). Effect of dynamic loading on the integrity of the interface between root canal and obturation materials. J Endod 34:470-473.

32. Sinyayev VA, Kunitsa TN, Shustikova ES, Levchenko LV, Griggs J (2008). Effect of amorphous calcium and calcium-magnesium phosphates on microbes. News of the Scientific and Technical Society KAHAK 2(13):120-125.

33. Della Bona A, Mecholsky JJ Jr, Barrett AA, Griggs J (2008). Characterization of glass-infiltrated alumina-based ceramics. Dent Mater 24(11):1568-1574. Epub Aug 9, 2008: doi:10.1016/j.dental.2008.06.005.

34. Yang MCK, Griggs JA, Wu S. Sample size determination in comparing mechanical reliabilities based on a Weibull model. Materials & Design (accepted).

35. Al-mazeedi HS, Griggs JA, Woody RD, Miller AW. Variations in color shade of veneer porcelain caused by firing technique. Dent Mater (submitted).

36. Zhang Y, Griggs JA. Boundary technique for cyclic fatigue: Part I, Probability of invalid experiments. Int J Fatigue (submitted).

37. Zhang Y, Griggs JA. Boundary technique for cyclic fatigue: Part II, Accuracy and precision of estimates. Int J Fatigue (submitted).

38. Voyiazis SS, Griggs JA, Woody RD, Higginbottom FL. Evaluation of the implant-abutment joint stability of two systems with internal connections after subjecting to cyclic loading. J Prosthet Dent (submitted).

39. Griggs JA, Al-Aqeel S, Zhang Y, Miller AW III, Cai Z. Effects of stressing rate and calculation method on subcritical crack growth parameters deduced from dynamic fatigue experiments. Int J Fatigue (submitted).

REFREEED MICROFILMED PAPERS AND PROCEEDINGS

1. Griggs JA, Hill TJ, Mecholsky JJ Jr. (1999). A modified flaw-size toughness technique. Ceram Eng Sci Proc 20(3):393-400.

2. Griggs JA, Marker VA, Miller BH, Cai Z, Santa Cruz J, Okabe T (2000). Dental materials in the new millenium: Research at Baylor College of Dentistry and a look at new trends. Tex Dent J 117(2):26-36.

3. Okabe T, Cai Z, Griggs JA, Wataha JC (2001). Dental casting of titanium alloys at Baylor College of Dentistry. In: Structural Biomaterials for the 21st Century. Niinomi M, Okabe T, Taleff EM, Lesuer DR, Lippard HE, editors. The Minerals, Metals, & Materials Society: Warrendale, PA, pp. 61-73.

8


4. Shustikova ES, Levchenko LV, Taisheva AS, Griggs J, Sinyayev VA (2003). Composition and behavior when heated of co-precipitated materials on the basis of hydroxyapatite modified by polyphosphate, diphosphate, and magnesium. First Annual Biomaterials Workshop, Crenfield University, Shrivenham, UK. March 17, 2003.

5. Levchenko LV, Shustikova ES, Nurkina ZS, Griggs J, Sinyayev VA (2003). Calcium phosphates are potential materials for medical application. First Annual Biomaterials Workshop, Crenfield University, Shrivenham, UK. March 17, 2003.

6. Watanabe I, Liu J, Saimoto A, Griggs J, Okabe T (2006). Effect of surface reaction layer on three-point flexure bond strength of resin composite to cast Ti and Ti-6Al-7Nb. ASTM STP 1471, pp. 113-119.

REFEREED ABSTRACTS/PRESENTATIONS/ PROCEEDINGS

1. Griggs JA, Shen C, Anusavice KJ (1994). Sensitivity of catalyst/base ratio on polymerization exotherm of resin cements. J Dent Res 73:229 Abstract 1019.

7. Griggs JA, Thompson JY, Anusavice KJ (1995). Effect of flaw size and auto-glaze treatment on porcelain strength. J Dent Res 74:219 Abstract 1658.

8. Griggs JA, Anusavice KJ (1996). Influence of thermal processing on microstructural coarsening in baria-fluormica glass-ceramic. J Dent Res 75:66 Abstract 389.

9. Griggs JA, Anusavice KJ (1997). Influence of thermal processing on crystallization rate in baria-fluormica glass-ceramic. In: Transactions of the Third International Congress on Dental Materials. Nakajima H, Tani Y, editors. Honolulu, Hawaii, November 4-8, 1997. Abstract P-045.

10. Anusavice KJ, Yang M, Griggs JA, Barrett AA (1997). Improved color difference equation for predicting observer matching of porcelain shades. J Dent Res 76:380 Abstract 2932.

11. Griggs JA, Anusavice KJ (1998). Influence of thermal processing on fracture toughness of baria-fluormica glass-ceramics. J Dent Res 77:266 Abstract 1288.

12. Griggs JA, Anusavice KJ, Mecholsky JJ Jr. (1999). Influence of thermal processing on fracture toughness of barium aluminosilicate glass-ceramics. J Dent Res 78:111 Abstract 47.

13. Okabe T, Kiyosue S, Woldu M, Cai Z, Yoda M, Griggs J, Okuno O, Takada Y (1999). Machinability of experimental Ti-Cu alloys. J Dent Res 78:485 Abstract 3035.

14. Yoda M, Konno T, Takada Y, Iijima K, Griggs J, Okuno O, Kimura K, Okabe T (1999). Bond strength of binary titanium alloys to porcelain. J Dent Res 78:485 Abstract 3033.

9


15. Griggs JA, Yoda M, Konno T, Okabe T (2000). Finite element model of a metal-ceramic bond test. In: Proceedings of the 12th Annual Conference of the Texas Mineralized Tissue Society. Dallas, Texas, July 21-23, 2000.

16. Griggs JA, Yoda M, Konno T, Okabe T (2000). Failure analysis of bonding of binary titanium alloys to porcelain. J Dent Res 79:275 Abstract 1052.

17. Konno T, Yoda M, Takada Y, Griggs J, Okuno O, Kimura K, Okabe T (2000). Bonding strength of titanium alloys to porcelain. J Dent Res 79:275 Abstract 1050.

18. Cai Z, Carrasco L, Griggs JA, Nunn ME, Okabe T (2001). Ceramic bonding to surface modified CP titanium. J Dent Res 80:255 Abstract #1753.

19. Griggs JA, Kishen A (2001). Effect of hydrolyzation on mechanical properties of a hydrothermal glass. J Dent Res 80:641 Abstract #915.

20. Puttaiah R, Griggs JA, Parekh J, Sargent C (2002). Effects of ClO2 on dentin and enamel shear bond strength. J Dent Res 81:Abstract #377.

21. Yoda M, Konno T, Takada Y, Griggs J, Okuno O, Kimura K, Okabe T (2002). Deflection of binary titanium alloys bonded to porcelain. J Dent Res 81:Abstract #2018.

22. Blue DS, Griggs JA, Woody RD, Miller BH (2002). Effects of bur grit size and abutment composition on machinability of ceramic implant abutments and wear of diamond burs. J Dent Res 81:Abstract #2467.

23. Puttaiah R, Griggs J, Cederberg R, Chandler J (2002). Effects of VistaClean dental waterline irrigant on dentin bonding. J Dent Res 81:Abstract #2621.

24. Le NK, Griggs JA, Woody RD, Miller BH (2002). Effect of smectite clay reinforcement on the strength of a hydrothermal glass. J Dent Res 81:Abstract #3958.

25. Griggs JA, Le NK (2002). Effect of flaw geometry on hydroxyl layer healing of a hydrothermal glass. J Dent Res 81:Abstract #3959.

26. Lee KM, Cai Z, Griggs JA, Okabe T (2002). SEM/EDS evaluation of porcelain adherence to gold-coated cast titanium. J Dent Res 81:Abstract #3981.

27. Sinyayev VA, Sedunov AA, Shustikova ES, Griggs J, Dorofeev DV. Thermal transformation of bioceramics precursors on the base of amorphous calcium-magnesium phosphate. In: Kazakhstan Internal Stomatological Exhibition and Scientific Forum, Almaty 2002.

28. Pallis K, Griggs JA, Woody RD, Guillen GE, Miller AW (2003). Fracture resistance and failure origin of three all-ceramic systems for posterior applications. J Dent Res 82:Abstract #446.

10


29. Benham AW, Griggs JA, Zhang Y (2003). Influence of powder-liquid mixing ratio on translucency and apparent density of a dental porcelain. J Dent Res 82:Abstract #1660.

30. Zhang Y, Griggs JA, Benham AW (2003). Sensitivity of porcelain translucency to powder-liquid mixing ratio. J Dent Res 82:Abstract #1658.

31. Puttaiah R, Griggs JA, Kanabar J, Coon D (2003). Effects of an immersion disinfectant and a surface disinfectant on three elastomeric impression materials. J Dent Res 82:Abstract #947.

32. Kanabar J, Griggs JA, Puttaiah R (2003). Effects of a parachlorometaxylenol-based disinfectant on elastomeric impression materials. J Dent Res 82:Abstract #948.

33. Al-Aqeel SM, Griggs JA, Zhang Y (2003). Effect of analysis method on fatigue parameters for an aluminous dental porcelain. Ceramic Transactions 147:Abstract #AM-S2-46-2003.

34. Griggs JA, Cai Z, Yoda M, Konno T, Okabe T (2003). Fracture surface comparison of titanium-ceramic bond strength tests. J Dent Res 82:Abstract #1270.

35. Ng CCH, Al-Bayat MI, Dumbrigue HB, Griggs JA, Wakefield CW (2003). Effect of no ferrule on failure of teeth restored with bonded posts and cores. J Dent Res 82:Abstract #2463.

36. Puttaiah R, Reagan J, Griggs J, Witherspoon D, Spears R, Liang H, Sargent C (2003). Efficacy of four treatment procedures in removal of smear layer during root canal treatment. J Dent Res 82:Abstract #139.

37. Shustikova ES, Levchenko LV, Taisheva AC, Khaua-Adam ST, Sedunov AA, Griggs J, Sinyayev VA (2003). Precipitated calcium-magnesium materials on the basis of monophosphate modified by polyphosphate, diphosphate and magnesium. In: International Conference on Dentistry, Almaty, May 28-31, 2003. p. 437-438.

38. Silina EN, Levchenko LV, Temiralieva GA, Kunitza TN, Khaua-Adam ST, Sedunov AA, Griggs J, Sinyayev VA (2003). Effect of caclcium phosphates precipitated from water solutions of mono- and diphosphate on microbes. In: International Conference on Dentistry, Almaty, May 28-31, 2003. p. 438.

39. Levchenko LV, Shustikova ES, Nurkina ZS, Griggs J, Sinyayev VA (2003). Calcium phosphates – potential objects for application in medicine. In: International Conference on Dentistry, Almaty, May 28-31, 2003. p. 439-440.

40. Sinyayev VA, Griggs J, Levchenko LV, Shustikova ES (2003). Phosphate of calcium for medicine. In: XVII Mendeleyev Congress on General and Applied Chemistry, Kazan, Sep 21-26, 2003. p. 298.

41. Gerwig CS, Griggs JA, Zhang Y (2004). Effects of smectite clay reinforcement and aging on porcelain strength. J Dent Res 83:Abstract #525.

11


42. Benham AW, Zhang Y, Griggs JA (2004). Influence of measurement technique on translucency and color of porcelain. J Dent Res 83:Abstract #1881.

43. Zhang Y, Griggs JA (2004). Cyclic fatigue strength of hydrothermal porcelain using Boundary Technique. J Dent Res 83:Abstract #40.

44. Griggs JA, Zhang Y (2004). Comparison of precision of mechanical reliability predictors for ceramic materials. J Dent Res 83:Abstract #83.

45. Griggs JA, Zhang Y (2004). Novel method for determining the confidence intervals of Weibull parameters. Ceram Eng Sci Proc 25:Abstract #CB-S1-76-2004.

46. Sinyayev VA, Kunitsa TN, Griggs JB (2004). Effect of amorphous calcium and calcium-magnesium phosphates on microbes. 2nd Annual Biomaterials Workshop, March 15, 2004. Cranfield University, Shrivenham, UK.

47. Blue DS, Griggs JA, Woody RD, Miller BH (2004). Abrasive particle size, ceramic type influence preparation efficiency, surface roughness, and bur surface deterioration. Dental Abstracts 49:117.

48. Kim JW, Griggs J, Regan JD, Ellis R, Cai Z (2004). The effect of cryogenic treatment on nickel-titanium endodontic files. J Endodont 30:Abstract #OR18.

49. Sinyayev VA, Griggs JA (2004). Polymeric and nonpolymeric calcium phosphates as potential objects for use by medicine. 7th SAC Seminar, November 2-4, 2004. Ekaterinburg, Russia.

50. Sinyayev VA, Aimanova OY, LeGeros RZ, Griggs J (2004). Microbiological effect of amorphous calcium phosphate materials on the basis of mono- and diphosphate, modified by zinc, copper, and silver. 7th SAC Seminar, November 2-4, 2004. Ekaterinburg, Russia.

51. Tokseitova GA, Shustikova ES, Dorofeev DV, Griggs J, Sinyayev VA, Sedunov AA (2004). The nature of potential biomaterial on the basis of the precipitated amorphous calcium magnesium phosphate. In: Materials of the International Scientific-Practical Conference “Problems of Modern Stomatology of Kazakhstan,” Almaty, 2004. p. 318.

52. Sinyayev VA, Kunitsa TN, Griggs J, LeGeros RZ, Sedunov AA (2004). Amorphous materials on the basis of mono- and diphosphates of calcium and magnesium modified by transitive metals. In: Materials of the International Scientific-Practical Conference “Problems of Modern Stomatology of Kazakhstan,” Almaty, 2004. p. 318.

53. Taskonak B, Griggs JA, Mecholsky JJ Jr, DeHoff PH, Anusavice KJ (2005). A critical comparison of techniques for measuring residual stresses in dental ceramics. J Dent Res 84: Abstract #2566.

54. Griggs JA, Zhang Y (2005). Cyclic fatigue of dental ceramics using boundary technique. Ceram Eng Sci Proc 26: Abstract #AM-S11-20-2005.

12


55. Griggs JA, Taskonak B. Cyclic fatigue of teeth using Boundary Technique. First International Conference on Mechanics of Biomaterials and Tissues (accepted).

56. Voyiazis SS, Griggs JA, Woody RD, Higginbottom FL (2005). Evaluation of the implant-abutment joint stability of two systems with internal connections after subjecting to cyclic loading. ITI (International Team for Implantology) World Symposium, Munich Germany, June 18-20, 2005.

57. Sinyayev VA, Griggs J, LeGeros RZ, Shustikova ES, Kunitsa TN (2005). Amorphous calcium phosphates as possible objects for biomedical application. New Polymer Systems for Biotechnical and Biomedical Applications, Yerevan, Armenia, July 12-14, 2005.

58. Sinyayev VA, Griggs J, Levchenko LV, Shustikova ES, Kunitsa TN (2005). Amorphous polymeric and non-polymeric calcium phosphates for medical application. 1st International Scientific and Practical Conference “Modern Polymeric Materials in Medicine and in Medical Technique,” Saint Petersburg, Russia, June 3-4, 2005.

59. Taskonak B, Griggs JA, Mecholsky JJ Jr, Yan J-H. Analysis of subcritical crack growth in dental ceramics using fracture mechanics and fractography. Abstract #1581. 35th Annual Meeting & Exhibition of the AADR, March 8-11, 2006, Orlando, FL.

60. Griggs JA, Taskonak B, Mecholsky JJ Jr, Yan J-H. Reliability model for framework ceramic with multiple flaw populations. Abstract #78. 35th Annual Meeting & Exhibition of the AADR, March 8-11, 2006, Orlando, FL.

61. Lee H-H, Griggs JA. R-curve behavior of a new veneering ceramic. Abstract #79. 35th Annual Meeting & Exhibition of the AADR, March 8-11, 2006, Orlando, FL.

62. Sinyayev VA, Griggs J, Shustikova ES, Dorofeyev DV, Mitina LM, Tokseitova GA. Porous and dense calcium phosphate bioceramics. International Congress on Nanobiotechnology and Nanomedicine, June 21-22, 2006, San Francisco, CA.

63. Sinyayev VA, Dorofeev DV, Shustikova ES, Tokseitova FA, Griggs J. Porous and dense calcium phosphate bioceramics. Bioceramics in Medicine, November 21-22, 2006, pp. 29-30.

64. Gruetter LM, Griggs JA, Lee H-H, Woody RD, Miller AW. Weibull modulus of dental porcelain is independent of fatigue loading. 31st International Conference & Exhibition on Advanced Ceramics and Composites, January 21-26, 2007, Daytona Beach, FL.

65. Griggs JA. Comparison of precision of Weibull parameter estimation methods. 85th General Session and Exhibition of the IADR, March 21-24, 2007, New Orleans, LA, Abstract #1283.

66. Berg R, Kurtz K, Griggs JA, Watanabe I. Laser peening of endosseous implants with a trilobe internal connection. 85th General Session and Exhibition of the IADR, March 21-24, 2007, New Orleans, LA, Abstract #89.

13


67. Nourel-din AK, Griggs JA, Shabka AA, Hamza HS. Effect of bonding approach on bleached enamel. 85th General Session and Exhibition of the IADR, March 21-24, 2007, New Orleans, LA, Abstract #1283.

68. Della Bona A, Mecholsky JJ Jr, Barrett AA, Griggs JA. Microstructure characterization and properties of alumina based ceramics. Proceedings of Conference on Tissue Engineering Scaffolds, Academy of Dental Materials, October 22-24, 2007, Abstract #15.

69. Sinyayev V, Griggs J, Levchenko L, Tokseitova G (2007). Porous and dense calcium phosphate bioceramics. American Chemical Society 233rd National Meeting & Exposition, March 25-29, Chicago.

70. Sinyayev V, Griggs J, Iskakov R, Levchenko L (2007). Porous calcium phosphate ceramics with controlled pore diameter. American Chemical Society 233rd National Meeting & Exposition, March 25-29, Chicago.

71. Lozano F, Griggs J, Nagy W, Woody R, Higginbottom F. Implant-abutment fit measured with micro CT versus optical microscopy. 37th Annual Meeting & Exposition of the AADR, April 2-5, 2008, Dallas, TX, Abstract #716.

72. Bishop CD, Griggs JA, He J. Cyclic fatigue of root canals obturated with different material systems. 37th Annual Meeting & Exposition of the AADR, April 2-5, 2008, Dallas, TX, Abstract #1051.

73. Della Bona A, Mecholsky JJ Jr, Barrett AA, Griggs JA. Characterization of glass-infiltrated alumina-based ceramics. 86th General Session and Exhibition of the IADR, April 2-5, 2008, Dallas, TX, Abstract #2138.

74. Eldawakhly EA, Griggs JA, Mokhtar A. Stress analysis of endodontically treated teeth with coronoradicular stabilization posts. 86th General Session and Exhibition of the IADR, April 2-5, 2008, Dallas, TX, Abstract #2857.

75. Eldawakhly EA, Griggs JA, Mokhtar A. Fatigue lifetimes of endodontically treated teeth with coronoradicular stabilization posts. 86th General Session and Exhibition of the IADR, April 2-5, 2008, Dallas, TX, Abstract #2858.

76. Dogus S, Kurtz K, Watanabe I, Griggs J. Engaging abutment position effect in implant retained fixed cantilevered prostheses. 86th General Session and Exhibition of the IADR, April 2-5, 2008, Dallas, TX, Abstract #1700.

77. Brown J, Borba M, Griggs JA, Cesar PF, Della Bona A. Step-stress analysis for planning dental ceramic fatigue tests. Hinman Student Research Symposium, Oct 31-Nov 2, 2008, Memphis, TN, Abstract #14.

78. Scherrer SS, Vittecoq E, De Mestral F, Cattani-Lorente M, Wiskott A, Griggs JA. Effect of CoJet sandblasting on fatigue data for Y-TZP ceramics. 87th General Session and Exhibition of the IADR, April 1-4, 2009, Miami, FL. Abstract #164.

14


79. Borba M, De Araujo MD, Fukushima KA, Della Bona A, Griggs JA, Cesar PF, Yoshimura HN. Flexural strength and fatigue behavior of all-ceramic structures. 87th General Session and Exhibition of the IADR, April 1-4, 2009, Miami, FL. Abstract #539.

INVITED LECTURES AND CONTINUING EDUCATION COURSES

“Processing and Failure Analysis of Dental Ceramics,” Department of Materials Science, University of North Texas, Denton, TX, USA, 1998.

“Contemporary and Future All-Ceramic Restorative Systems,” Department of Restorative Dentistry and Biomaterials, University of Texas at Houston – Dental Branch, Houston, TX, USA, 2000.

“Effect of Hydrolyzation Treatment on the Mechanical Properties of a Hydrothermal Glass,” Department of Dental Materials, University of Florida, Gainesville, FL, USA, 2001.

“Mechanism of Strength Increase for a Hydrothermal Porcelain,” Department of Materials Science, University of North Texas, Denton, TX, USA, 2002.

“Fatigue Resistant Ceramics,” Dallas Section of the American Association for Dental Research, Dallas, TX, USA, 2002.

“Finite Element Modeling as a Tool in Dental Research,” Department of Restorative Dentistry and Biomaterials, University of Texas Houston – Dental Branch, Houston, TX, USA, 2003.

“Cyclic Fatigue Testing Using Boundary Technique,” Department of Materials Science & Engineering, University of North Texas, Denton, TX, USA, 2004.

“Teeth Stress Test,” Dental Health Check, WFAA-TV News, Airdate: June 7, 2004.

“Statistical Design of Efficient Fatigue Tests,” American Institute for Chemical Engineering (AIChE), Dallas, TX, USA, 2005.

“Fatigue Measurement Techniques for Dental Ceramics,” Key Note Speaker for Group DM3 (Ceramics and Cements), International Association for Dental Research, Baltimore, MD, USA, 2005.

“Fatigue Testing Techniques for Ceramic Materials,” Lunch & Learning Speaker, International Association for Dental Research, Baltimore, MD, USA, 2005.

“Reliability of Dental Framework Ceramic with Multiple Flaw Populations,” ADA Paffenbarger Research Center, National Institute of Standards & Technology (NIST), Gaithersburg, MD, USA, 2006.

Ibid., University of Mississippi Medical Center, Jackson, MS, USA, 2007.

“Predicting Fatigue Failure of All-Ceramic Prostheses,” University of Sao Paulo, Sao

15


Paulo, Brazil, 2006.

“Accelerated Lifetime Testing of Prostheses,” University of Florida College of Dentistry, Gainesville, FL, USA, 2007.

Ibid., School of Dentistry, University of Mississippi Medical Center, Jackson, MS, USA, 2007.

Ibid., University of Texas – Dental Branch, Houston, TX, USA, 2007.

Ibid., Indiana University, Indianapolis, IN, USA, 2007.

Ibid., Synthes Inc., West Chester, PA, USA, 2008.

“Materials Requirements for Dental Applications,” University of Florida College of Engineering, Gainesville, FL, USA, 2007.

“Recent Advances in Materials for All-Ceramic Restorations,” Mississippi Association for Cosmetic Dentistry, Jackson, MS, USA, 2007.

Ibid., Mississippi Dental Laboratory Association, Jackson, MS, USA, 2008.

“Challenges of Using 3-D Finite Element Meshing Software,” Lunch & Learning Speaker, International Association for Dental Research, Miami, FL, USA, 2009.

PATENTS

Method for Production of Porous Calcium Phosphate Material #2005/0896.1 (July 8, 2005), International class C01B 25/32, C04B 35/447, Sinyayev VA, Griggs J, Levchenko LV, Dorofeyev DV.

Method for Production of Calcium Phosphate Ceramic Material #18851 (March 31, 2006), International class C01B 25/32, C04B 35/447, Sinyayev VA, Griggs J, Dorofeyev DV, Levchenko LV.

TEACHING RESPONSIBILITIES

1999 Instructor, 8150, "Contemporary Dental Materials" at Baylor College of Dentistry

1999 Instructor, D4 Elective, "What’s New in Esthetic Dentistry" at Baylor College of Dentistry

1999 - 2006 Instructor, ORT 5107, "Materials Science in Orthodontics" at Baylor College of Dentistry

1999 - 2006 Instructor, DH 355, "Applied Dental Materials" at Baylor College of Dentistry

16


2000, 2006 Instructor, PRO 5126, "Related Discipline Seminar" at Baylor College of Dentistry

2001 Coordinator, DM 5224, "Materials Thermodynamics" at Baylor College of Dentistry

2001 - 2002 Coordinator, DM 5V60, "Special Problems in Biomaterials Science (Literature Review)" at Baylor College of Dentistry

2002 Coordinator, DM 5204, "Science of Materials - Polymers" at Baylor College of Dentistry

2002 Coordinator, D4 Elective, "Advanced Dental Materials Science" at Baylor College of Dentistry

2002 - 2003 Coordinator, DM 5203, "Science of Materials - Ceramics" at Baylor College of Dentistry

2003 Coordinator, DM 5V60, "Special Problems in Biomaterials Science (Grant Writing)" at Baylor College of Dentistry

2005 - 2007 Instructor, BMS 5222, "Applied Biostatistics" at Baylor College of Dentistry

2007 Instructor, BMS701-1, "Fundamentals of Materials Science A"

2007 Instructor, BMS728, "Failure Analysis of Medical Implants"

2007 - 2008 Instructor, DENT624, "Implant Dentistry"

2007 - 2008 Instructor, DENT619, "Materials Science"

2008 Coordinator, BMS701-1, "Fundamentals of Materials Science A"

2008 Coordinator, BMS701-2, "Fundamentals of Materials Science B"

2008 - 2009 Instructor, DENT616-1, "Dental Caries I – Dental Amalgam"

2008 Instructor, DENT643-1, "Orthodontics I"

2008 Coordinator, BMS750, "Special Topics (Mathematics for Materials Study)"

2009 Instructor, DENT616-3, "Dental Caries III – Cast Gold"

COMMITTEES – BAYLOR COLLEGE OF DENTISTRY

1998 - 2007 Graduate Education Council

17


1999 - 2002 Research Committee (Chair 2000)

1999 - 2007 Biomedical Sciences Graduate Committee

1999 - 2007 Facilities Development Advisory Committee

2000, 2003 Lux Scholarship Committee (Chair 2000)

2001 Research Advisory Council

2002 - 2004 PATRIOT Act Compliance Task Force

2003 - 2004 Research Facilities Task Force

2003 - 2004 CODA Facilities & Resources Committee

2003 - 2004 Biosafety Committee

2004 Applied Biostatistics Course Review Committee (Chair)

2007 Research & Scientific Communication I & II Course Review Committee

COMMITTEES – UNIVERSITY OF MISSISSIPPI MEDICAL CENTER

2007 - Present Executive Committee, School of Dentistry

2007 - Present Space Utilization Committee, School of Dentistry

2008 - Present Deans & Associates Advisory Group, School of Dentistry

2008 Strategic Planning Committee, School of Dentistry

2008 - Present Research Advisory Committee, UMC

2008 - Present Research Advisory Committee (Chair), School of Dentistry

2008 - Present Self-Study Steering Committee, School of Dentistry

2008 - Present Graduate Program Review Committee, UMC

PROFESSIONAL SERVICE

1998 - Present Reviewer, Journal of Dental Research

1998 - Present Reviewer, Journal of Dentistry

1998 - Present Reviewer, Dental Materials

2000 - Present Reviewer, Journal of Materials Science

2001 - 2002, 2008 Paffenbarger Award Committee, Academy of Dental Materials

18


2000 - 2005, 2008 Abstract Reviewer, International Association for Dental Research

2003 Abstract Reviewer, American Association for Dental Research

2003 - Present Reviewer, Journal of Prosthetic Dentistry

2004 Program Chair, Group DM7 (Metallic), International Association for Dental Research

2005 - Present Reviewer, Journal of Oral Rehabilitation

2006 Student Poster Competition Committee, American Ceramic Society

2006 - Present Reviewer, Journal of Prosthodontics

2006 - Present Reviewer, Journal of Biomedical Materials Research

2007 - Present Reviewer, Medical Engineering & Physics

2009 Program Chair, Group DM10 (Equipment), International Association for Dental Research

COMMUNITY SERVICE

1996 Summer Science Training Program Mentor, Gainesville, FL

1998 Newberry Elementary Science Fair Judge, Newberry, FL

1999 - 2000 Habitat for Science Mentor, Dallas, TX

2001 - 2004 Sunday School Teacher, Denton Unitarian Universalist Fellowship, Denton, TX

2006 State Science Fair Judge, Dallas, TX

2007 LCYSA Boys Soccer Coach, Corinth, TX

2007 - 2009 Habitat for Humanity, Jackson, MS

2009 Science Fair Judge, Madison, MS

ADVISOR TO STUDENTS FOR RESEARCH

Ng MW. “Influence of thermal processing on fracture toughness of baria-fluormica glass-ceramics,” High school student, University of Florida, 1997.

Perez A. “toughness of low mercury release dental amalgams,” High school student, Baylor College of Dentistry, 1999.

19


Vo P. “Effect of hydrolyzation on mechanical properties of a hydrothermal glass,” High school student, Baylor College of Dentistry, 2000.

Parekh J. “Effects of ClO2 on dentin and enamel shear bond strength,” D1 student, Baylor College of Dentistry, 2001.

Benham A. “Influence of powder-liquid mixing ratio on translucency and apparent density of a dental porcelain,” D1 student, Baylor College of Dentistry, 2002.

Kanabar J. “Effects of a parachlorometaxylenol-based disinfectant on elastomeric impression materials,” D3 student, Baylor College of Dentistry, 2002.

Blue D. “Effects of bur grit size and abutment composition on preparation of ceramic implant abutments,” M.S. Thesis, Baylor College of Dentistry, 2002.

Pallis K. “Fracture resistance of three all-ceramic systems for posterior applications,” M.S. Thesis, Baylor College of Dentistry, 2002.

Almazeedi H. “Variations in color shade of veneer porcelain cause by firing technique,” M.S. Thesis, Baylor College of Dentistry, 2003.

Al-Aqeel S. “Fatigue parameter estimation of Vitadur Alpha and In-Ceram Zirconia dental ceramics using different methods of calculation,” M.S. Thesis, Baylor College of Dentistry, 2003.

Benham A. “Influence of measurement technique on translucency and color of porcelain,” D2 student, Baylor College of Dentistry, 2003.

Gerwig C. “Effect of smectite clay reinforcement and aging on porcelain strength,” D1 student, Baylor College of Dentistry, 2003.

Kim J. “The effects of cryogenic treatment on nickel titanium endodontic files,” M.S. Thesis, Baylor College of Dentistry, 2004.

Saab X. “Effect of abutment angulation on the strain on the bone around an implant in the anterior maxilla,” M.S. Thesis, University of Texas at Houston – Dental Branch, 2004.

El-Din AKN. “Shear bond strength and ultra-morphological study of the interaction of organic solvent-based adhesives bonded immediately to bleached enamel,” M.S. Thesis, Baylor College of Dentistry, 2004.

Kim J. “The effects of cryogenic treatment on nickel titanium endodontic files,” M.S. Thesis, Baylor College of Dentistry, 2004.

Chung DH. “Microstructural analysis of human cortical bone using confocal images and ultrasonic velocity,” Ph.D. Thesis, Baylor College of Dentistry, 2004.

Zhang Y. Post-doctoral fellowship, 2002-2004.

Voyiazis S. “Evaluation of the implant-abutment joint stability of two systems with internal connections after subjecting to cyclic loading,” M.S. Thesis, Baylor College of Dentistry, 2005.

Gruetter L. “Constructing a stress-lifetime-failure probability model for veneer porcelain from cyclic fatigue measurements,” M.S. Thesis, Baylor College of Dentistry, 2005.

20


Patil K. “Evaluation of teeth obturated with Epiphany: Root strength and thermal changes,” M.S. Thesis, Baylor College of Dentistry, 2005.

Taskonak B. Post-doctoral fellowship, 2004-2005.

El-Din AKN. “Effect of bonding approach on shear bond strength, morphological, and chemical characterization of bleached vs non-bleached enamel,” Ph.D. Thesis, Cairo University, 2006.

Le NK. “Effect of smectite clay reinforcement on the fracture resistance of low fusing porcelain,” M.S. Thesis, Baylor College of Dentistry, 2006.

Lee H-H. Faculty on sabbatical leave, 2005-2006.

Butler B. “Fractal analysis of fractured dental ceramics,” M.S. Thesis, Baylor College of Dentistry, 2007.

Allen M. “Negotiating the constricted canal: an in vitro comparison of endodontics pathfinders,” M.S. Thesis, Baylor College of Dentistry, 2007.

Lozano FE. “Comparison of implant abutment fit tolerances with optical microscope versus micro CT,” M.S. Thesis, Baylor College of Dentistry, 2008.

Ng CCH. “Influence of remaining coronal tooth structure location on the fracture resistance of restored endodontically treated anterior teeth,” M.S. Thesis, Baylor College of Dentistry, 2008.

Eldawakhly EA, “Evaluation of different dowel materials and designs used for coronoradicular stabilization of endodontically treated teeth,” PhD. Dissertation, Cairo University, 2008.

Duan Y. Post-doctoral fellowship, 2008-present.

21

Documents

62189Griggs Curriculum Vitae 2009-04-17.doc