682 Installing Microsoft® SQL Server 2008 for Wonderware Products

8/16/2019 682 Installing Microsoft® SQL Server 2008 for Wonderware Products

1/26

8/22/13 Installing Microsoft® SQL Server 2008 for Wonderware Products

https://wdnresource.wonderware.com/support/kbcd/html/1/t002451.htm 1

Tech Note 682

Installing Microsoft® SQL Server 2008 for Wonderware Products

All Tech Notes, Tech Alerts and KBCD documents and software are provided "as is" without warranty of any kind. See the Terms of Use for

more information.

Topic#: 002451

Created: February 2010

Updated: May 2010

Updated: December 2012

Updated: August 2013

Introduction

Note: This Tech Note was formerly titled Installing Microsoft® SQL Server 2008 for Wonderware Historian v10.0.

This Tech Note provides step-by-step procedures to install SQL Server 2008 on a 32- or 64-bit Operating System.

Wonderware Historian version 10.0 supports both 32-bit and 64-bit Windows Server 2008 SP2 and Vista SP2 (Ultimate,

Business, and Enterprise) Operating System editions.

Historian 10.x and older supports Microsoft SQL Server 2005 and 2008 32-bit version ONLY.

Products included in Wonderware System Platform 2012 R2 (Historian/Historian Client, Wonderware Application Server, and

Wonderware Information Server) support MS SQL Server 2008 (and later) 32- and 64-bit versions.

The following table details the SQL Server requirements for ArchestrA System Platform 2012 R2 components. Use the

following legend:

Y Supported

S Small System Only

R Supported and Recommended

N Not Supported

Not Applicable

2008 SP3

Express-

SSMSE (32-

bit)

2008 SP3

Standard,

Enterprise (32-

bit Only)

2008 R2 SP1

Express-

SSMSE (32-

bit)

2008 R2 SP1

Standard,

Enterprise

(32/64-bit)

2012

Express-

SSMSE (32-

bit)

2012 Standard,

Enterprise

(32/64-bit)

InTouch 2012 R2(v. 10.6)

S Y S Y S Y

Application

Server 2012 R2

(v3.6)

S Y S Y S Y

Historian Server

2012 R2 (v11.0)S Y S Y S Y

Historian Client

2012 R2 (v10.1)

https://wdnresource.wonderware.com/support/kbcd/html/1/T000792.htm


2/26



Information

Server Portal

2012 R2 (v5.0)

S Y S Y S Y

Information

Server Clients

2012 R2 (v5.0)

Compact

Installation (1-

500 I/O-per-

node)

Y N Y N Y N

Small Installation

(1-5,000 I/O-

per-node)

N Y N R N Y

Medium

Installation (5K-50K I/O-per-

node)

N Y N R N Y

Large Installation

(50K-400K I/O-

per-node)

N N N R N Y

Check the Compatibility Matrix on the Wonderware Developer Network for other product details.

You should allow approximately 1 hour to complete the installation.

Application Versions

See Compatibility Table (above)

Installing SQL Server 2008

1. Insert the SQL Server 2008 installation DVD into your DVD drive. If the autorun feature on your DVD drive does not

launch the installation program, navigate to the root of the DVD and double-click Setup.exe. You will see the SQL

Server Installation Center:

https://wdn.wonderware.com/sites/WDN/Pages/Tech_Support/DBCompatibilityMatrix.aspx


3/26



FIGURE 1: SQL SERVER INSTALLATION CENTER

If you click New SQL Server stand-alone... you will install the 64-bit version.

Important: SQL Server 2008 64-bit version is currently not supported for versions prior to ArchestrA System Platform

2012 R2 SP1. For more information, which product is supported with what SQL Server version, please see the Database

Compatibility Matrix on the Wonderware Developer Network.

2. Click the Options item and select your Processor Type.

If you are using Wonderware product released before Wonderware System Platform 2012 R2, c lick the x86 Processor

Type (Figure 2 below).

The option shown below is used only in the context of this Tech Note. It shows installing the 32-bit

architecture version of SQL Server. Review the Compatibility Table (above) for your specific requirements.

FIGURE 2: X86 PROCESSOR TYPE OPTION

3. Click Installation and then New SQL Server stand-alone... (Figure 2 above) to install the 32-bit SQL Server 2008.

This installation will now run the Setup Support Rules operation. This operation identifies problems that can happen

during the installation of SQL Server Setup Support files.

You must correct all the problems before the install can continue. After the operation completed, all the setup support

rules must be passed.

https://wdnresource.wonderware.com/support/kbcd/html/1/t002451.htm#t1https://wdn.wonderware.com/sites/WDN/Pages/Tech_Support/DBCompatibilityMatrix.aspx


4/26



• Click the Show Details button to see the status of the rules (Figure 3 below).

FIGURE 3: COMPLETED SETUP SUPPORT R ULES4. To continue, click OK.

5. On the Setup Support Files screen, click Install to continue with the support files installation.


5/26



FIGURE 4: SUPPORT FILES INSTALLATION6. When the Support Files installation is finished, c lick Next.


6/26



FIGURE 5: SETUP SUPPORT FILES INSTALLATION COMPLETED7. On the Product Key dialog box, click the Enter the product key option. The embedded product key should appear in

the field.


7/26



FIGURE 6: EMBEDDED PRODUCT KEY8. Click Next.

9. Review the license terms, and if you agree, c lick I Accept the License Terms and click Next.


8/26



FIGURE 7: ACCEPT LICENSE TERMS10. Select the features shown in Figure 8 (below). Analysis and Reporting Services (for WIS integration) are optional

selections.

SQL Server Replication and Full Text Search are also optional selections that do not impact Historian functionality.


9/26



FIGURE 8: SELECT FEATURES11. Click Next.

This example includes Reporting Services because the Wonderware Information Server is installed later.

12. On the Instance Selection dialog box, select the Default Instance (Figure 9 below). Wonderware Products currently

do not support Named Instances.


10/26



FIGURE 9: DEFAULT INSTANCE

Accept the default Instance ID and Instance Root Directory.

13. Click Next.

Note: MS SQL 2008 Express Edition is supported for Historian 10.0. If you are installing MS SQL 2008 Express, make sure itactually installs the Default instance.

There is an issue in the Express install that even if you select the Default instance required by the Wonderware Historian, it

still results in the database engine being installed as the instance named SQLEXPRESS.

As a workaround, you can select the option to install a Named instance and enter MSSQLSERVER as the instance name

(see the information about CR L00090827 in the Historian's Readme.html file).


11/26



FIGURE 10: DISK SPACE R EQUIREMENTS

14. Confirm the Disk Space Requirements and click Next.

15. In the Server Configuration window, click Use the same account for all SQL Server services, then select NT

Authority\System from the drop-down list (Figure 11 below).


12/26



FIGURE 11: SERVER CONFIGURATION16. If you are installing MS SQL Server on an English operating system, proceed to Step 19 (below) to continue the

installation.

If you are installing MS SQL Server on a non-English operating system, click the Collation tab and proceed to Step

17 (below).

17. In the Collation tab, select SQL_Latin1_General for the Database Engine collation.

If you are installing Analysis Services, its collation setting is Latin1_General_CI_AS (Figure 12 below).

https://wdnresource.wonderware.com/support/kbcd/html/1/t002451.htm#s17https://wdnresource.wonderware.com/support/kbcd/html/1/t002451.htm#s20


13/26



FIGURE 12: SERVER CONFIGURATION - COLLATION

If you find any other collation, change it to Latin1_General by clicking the Customize button next to Database

Engine collation field.

Then, select SQL_Latin1_General_CP1_CI_AS from the list (Figure 13 below).


14/26



FIGURE 13: SERVER CONFIGURATION -CUSTOMIZE DATABASE ENGINE COLLATION18. Click the Customize button next to Analysis Services collation and select Latin_General from the list (Figure 14

below).


15/26



FIGURE 14: SERVER CONFIGURATION – CUSTOMIZE ANALYSIS SERVICES COLLATION19. Click OK then Next.

20. On the Database Engine Configuration screen, select the Mixed Mode (SQL Server authentication and Windows

Authentication) in the Account Provisioning tab (Figure 12 below). Mixed Mode (SQL Server authentication and

Windows authenticat ion) is optional but st rongly recommended.

21. Type a password for the built-in SQL System Administrator account (sa). Configure the sa-level with a strong

password for security purposes.

22. Click Add to add any users who you want to have administrator rights when using Windows authentication. In thisexample, a domain account and the Administrator user are visible (Figure 15 below).


16/26



FIGURE 15: DATABASE ENGINE CONFIGURATION23. Click the Data Directories tab to review all the directories then click Next (Figure 16 below).


17/26



FIGURE 16: DATABASE ENGINE CONFIGURATION > DATA DIRECTORIES24. On the Analysis Services Configuration window, click Add to specify the users to have administrative permissions for

Analysis Services.


18/26



FIGURE 17: ANALYSIS SERVICES CONFIGURATION25. Click the Data Directories tab to examine the folder.


19/26



FIGURE 18: ANALYSIS SERVICES CONFIGURATION > DATA DIRECTORIES26. Click Next.

27. In the Reporting Services Configuration window, click Install the native mode default configuration option and

click Next (Figure 19 below). In this example, Wonderware Information Server is used as the native mode.


20/26



FIGURE 19: R EPORTING SERVICES CONFIGURATION28. Acc ept the default sett ings for the rest of the installation sequence. The installation will then proceed and you will see

each module install.


21/26



FIGURE 20: ERROR AND USAGE R EPORTING29. When the Installation completes, click the Show details button.


22/26



FIGURE 21: INSTALLATION R ULES


23/26



FIGURE 22: INSTALLATION RULES PASSED

On the Ready to Install sc reen, c lick Install (Figure 23 below).


24/26



FIGURE 23: R EADY TO INSTALL30. When the setup process completes, all of the feature installations in the Installation Progress screen should show

Success in the Status column (Figure 24 below).


25/26



FIGURE 24: INSTALLATION PROGRESS SUCCESS31. Click Next to finish the installation. When the installation completes, you should see the Complete screen (Figure 25

below).


26/26


FIGURE 25: INSTALLATION COMPLETE32. Install SQL Server 2008 SP1 from file SQLServer2008SP1-KB968369-x86-ENU.exe from the SQL Server 2008

Service Pack 1 DVD.

Click the following icon to view this file in .pdf format:

B. Nguyen, M. Salah, P. Mauler

Tech Notes are published occasionally by Wonderware Technical Support. Publisher: Invensys Systems, Inc., 26561 Rancho Parkway South, Lake

Forest, CA 92630. There is also technical information on our software products at Wonderware Technical Support.

For technical support questions, send an e-mail to [email protected].

Back to top

©2013 Invensys Systems, Inc. All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying, recording, broadcasting, or by any information storage and retrieval system,without permission in writing from Invensys Systems, Inc. Terms of Use.
https://wdnresource.wonderware.com/support/kbcd/html/1/T000792.htmhttps://wdnresource.wonderware.com/support/kbcd/html/1/t002451.htm#topmailto:[email protected]://wdn.wonderware.com/sites/WDN/Pages/Tech_Support/TechSupport.aspxhttps://wdnresource.wonderware.com/support/kbcd/html/1/t002451.pdf

Documents

682 Installing Microsoft® SQL Server 2008 for Wonderware Products