6861 Instructions... · 2016. 12. 15. · Each increment is 1 litre, adjustable from 2-5 litres, or from 2-3 litres for model 6832. unit by turning it a quarter turn clockwise and

Assembly instructions

ngiS öfI

6861WC-Unit

6861

I00128_NOV 16

Version: Sep 15

Call 1300 369 273www.enware.com.au/ifo Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 02 8536 4000 Fax: 02 8556 4055

IFO6861 IFO Increased Height Toilet - S Trap

Product Code

Ifo Sign Toilet Increased Height - S Trap

FEATURES

• 460 mm seat height (excluding seat)

• 95O cistern to pan angle

• Cistern complies with all angles thrust test of 1100 N

• Pan load rated to 400 kg

• Chromed flush button for improved visibility

• Seamless cistern as back and side transfer support

• Increased foot print for enhanced stability

• Allows for undisturbed coving seal

• Tested to comply with 90% of AU commonly used commode chairs

• WELS 4 star rated (4.5/3L Flush)

• Fully glazed on back and inside rim to avoid bacteria growth

• Integrated cistern is a deemed-to-satisfy solution which serves as a backrest “on” the accessible toilet as required in AS1428.1-2009

• Provides 100% consistency and reliability as combined WC and back support.

OPTIONS

Raised Flush Button IFO98308

Pressalit Hard Seat - white IFO724D55999

Pressalit Sign Soft Close Seat - white IFO624000-DO39999

Pressalit Sign Hard Seat No Lid - white IFO553000-BD1999

Pressalit Sign Hard Seat - anthracite grey IFO554112-BD1999

Pressalit Sign Hard Seat - white IFO554000-BD1999

Arm Supports IFO98125

Fresh Sticks - 10 packets of 5 sticks IFO94568

Floor Anchor IFO98015

Free standing toilet with 460mm seat height for those who cannot easily sit down or stand up - especially for hip and knee support.

All pans are to be fixed using high grade anti-bacterial silicone of appropriate colour. Where exposed mounting holes are provided, 316 stainless steel screws are to be used. Raised Height

Button and Pressalit Care Toilet Seats & Support Arms shown here are not supplied as standard, but can be ordered separately - see options

Ø102

20

670

40

460 400-455

360

95900

100 Min.*

Back View Side View

* For set-out information including AS1428 and corner positioning please refer to our installation instructions.

Back View Side View

Certi�kate Nr. 2004-SKM-AE-825ISO 14001:2004

Certi�kate Nr. 2004-SKM-AQ-2054ISO 9001:2000

AS 1172.1WMKA21026IAPMO R&T

*Seat not included

IFO6861

Version: Jan 16


Ifo Toilet - S Trap - WC Set Out

1428.1 set out

in accordance with AS 1428.1 1:2009

Distance from finished wall to front of pan 800mm

Distance from finished wall to back of pan 130mm

Distance from finished wall to centre of outlet 200mm

125

200

4095˚

800

Institutional/Health set out

Set out typical for hospitals which allows for substantial air circulation and free coving



Distance from finished wall to centre of outlet 170mm

Minimum set out

The minimum to still allow air circulation behind the WC pan



Distance from finished wall to centre of outlet 100mm30

100

40

700

Ø 100 DWV

Finished wall

50–70

Min 170

Finished Floor

100

170

40

775

Ø 100 DWV

Finished wall

Finished Floor

50–70

Min 200

165

165

Finished wallsurface

45° Corner Set up with no arm support system

Finished wallsurface

280Min.

280 Min.

45° Corner Set up with arm support system

Ø 100 DWV

Finished wall

50–70

Min 100

Finished Floor

Version: Sep 15






AS 1172.1WMKA21026IAPMO R&T

Ifo Sign Toilet Increased Height S Trap AS1428.1:2009

IFO6861

IFO6861 - IFO - Toilet AS1428.1:2009 set up - S Trap

Product Code

FEATURES

• Free Standing WC

• 460 mm seat height (excluding seat)

• 800 mm finished wall to front of pan (based on 200 mm off set)

• 95 degree cistern to pan angle

• Cistern complies with all angles thrust test (for AS1428.1:2009) of 1100 N for backrest requirements

• Integrated cistern is a deemed-to-satisfy solution which serves as a backrest “on” the accessible toilet as required in AS1428.1-2009

• Pan load rated to 400 kg

• Seamless cistern offering back and side transfer support

• Increased foot print for enhanced stability

• Allows for undisturbed coving seal

• Tested to comply with 90% of commonly used Australian shower commode chairs

• WELS 4 star rated (4.5/3L Flush)

• Fully glazed on back and inside rim to avoid bacteria growth

• Patented Fresh WC blue stick technology enabled for increased infection control

• All pans are to be fixed using high grade anti-bacterial silicone of appropriate colour and where exposed mounting holes are provided, 316 stainless steel screws are to be used

• Provides 100% consistency and reliability as combined wc and back support - no additional backrest needed to meet requirements of AS1428.1:2009**

** Refer to AS1428.1:2009 for height and spacial requirements

*Seat not included

White freestanding toilet with 460mm seat height, with cistern as resevior and backrest.

OPTIONS

Pressalit Sign Seat with Lid - anthracite grey IFO554112-BD1999

IFO Sign Raised Flush Button IFO98308

Floor Anchor IFO98015

Fresh Sticks - 10 packets of 5 sticks IFO94568

Images show Rasied Height Button and Pressalit Sign Toilet Seat with Lid - these are not supplied as standard, but can be ordered separately - see options.


Version: Sep 15

Ifo Sign Toilet Increased Height S Trap AS1428.1:2009

Ø102

20

670

40

460 400-455

360

95900

200*

800*Back View Side View

* For set-out information including AS1428 and corner positioning please refer to our installation instructions.

IFO6861

1100 N all anglesthrust test compliant

400 kg loadrating compliant

Ø 100mm DWV

Finished wall

Finished Floor50–70

200

Back View Side View

* for more details on the set out, refer to separate document Ifo WC Set Out TDS

Ifö Sign 6860, 6861You have chosen the optimum standard WC unit with built-in S-trap. It can usually be installed as quickly and easily, and in the same situations, as WC units with traditional open S-traps.

Dosing

WC connections

The water connection to the cistern inlet is a 1/2" BSP male. Looking from the front of the pan, it is located on the right hand side, on the bottom of cistern.

See “S-Trap WC Set Out” above for connection dimensions and other dimensions on WC unit.

Bonding/Siliconing

Thank you for choosing Ifö Sign.You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit. To guarantee correct and reliable installation of this product we urge you to follow the installation instructions. Enware cannot accept liability for damage that occurs as a result of faulty installation.

For toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm

stability. Fixing the toilet pan with only the silicone seal is

Waterproof Floor Mounting

Aavailable as an option:

This WC unit is suitable for bonding/siliconing, see images 11-15.

This WC is prepared for the Fresh WC function, with a

screw, as illustrated in images 16 - 17.

Depending on the content of the tablet, it produces a fresh

blocks that are suspended from the rim of the bowl, by

Ifo Fresh Sticks are available from Enware. Product code IFO94568 - 10 packets of 5 sticks.

The method applies to installation of WC units using elastic

free surface.

After pan is levelled, water is connected and pan is visually inspected for any leaks, install the rear cover to plug the inspection hole. Apply silicone sealant underneath the base of the pan and around the perimeter to create a

Also apply silicone sealant around the rear cover to create

Ensure no gap is left that can let any moisture to get throughinside the base of the pan.

supplied blind cover plugs (IFO94752) must be usedin the screw holes on the WC unit, and sealed with silicone.

Do not use the WC before the silicone has cured.

Each increment is 1 litre, adjustable from 2-5 litres, or from 2-3 litres for model 6832.

unit by turning it a quarter turn clockwise and then lifting

Flush volume

button, cut away the catch on the lever arm as shown in

so that the rear catch is installed facing forwards

10

Flush button

Removal of Flush Button and cistern cover

Servicing Cistern Components

This WC-unit is test approved according to NT VVS 120

If necessary

See images 30 - 32.

, . 2423

30

31

Reinstalling

Maintenance advice and cleaning

Reinstall in reverse order. The screws for the cistern mounting must be tightened alternately to a maximum torque of 2.5 Nm as illustrated in image 35. The cover screw must be tightened to a maximum torque of 1.0 Nm as illustrated in image 37.

32

33

WC units, bidets and wash basins have a glazed surface. Glazed surfaces are easy to keep clean and are resistant against most chemicals. Clean regularly to prevent cleaning problems. Use normal cleaning agents.

“Clean regularly to prevent cleaning problems. However,

use hot water and soap and wipe dry with a cloth”.This is because cleaning agents for porcelain are not intended for chrome parts/plastics and can risk cracking

Cleaning utensils, which contain abrasive agents, such as wire wool and green scouring pads, must not be used. Strong acids, e.g. hydrochloric acid and sulphuric acid and strong alkalines, e.g. caustic soda should not be used. Dripping taps and running WC units must be repaired immediately.

For repair or to purchase spare parts, contact your local plumbing contractor or plumbing centre. For more inform-ation, contact Enware.

If the toilet is subject to freezing temperatures, the WC

0.3 - 0.4 litres of anti-freeze into the water trap and cover

evaporation.

Ifö Sign 6893, 6894

Note: Inlet Water Pressure Max. 500 kPa (AS 3500.1)

You get more free �oor space with a wall-hung style WC unit. It facilitates easier cleaning of the bathroom �oor.

Ifo Sign WC units are supplied with:

- Polished chrome �ush button (IFO98303)

Optional:Raised Chrome Button (IFO98308)

Remove the �ush button, cover mounting and cover asillustrated in images 16-22.

If the WC unit runs - �rst check that the outlet valve'soutlet seal washer is not damaged. If it is, replace the outlet washer (IFO96765), as illustrated in images 23-25.Then check that the inlet valve closes correctly. If it doesnot, replace the inlet valve (IFO96766) as illustrated inimages 26-28.

The lever arm to the inlet �oat is normally installed on the lower �oat setting for optimum water �ow. Thissetting can handle a water pressre of 10 bars. In theevent of the WC unit running at high water pressures,the lever arm can be moved to the upper setting andthen handles a maximum water pressure of 12 bars. See image 29.

11

13

12

14

GB / Make sure the surface of the tiles is clean, dry and free from grease.

* IMPORTANT NOTE for toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports,

15

After pan is levelled, water is connected and pan is visually inspected for any leaks, install the rear cover to plug the inspection hole. Apply silicone sealant underneath the base of the pan and around the perimeter to create a strong bonding between the pan and the �oor. Also apply silicone sealant around the rear cover to create a thorough seal between the rear cover, pan and �oor. Ensure no gap is left that can let any moisture to get through inside the base of the pan.

If the WC unit is bonded / siliconed to the �oor, the supplied blind cover plugs (IFO94752) must be usedin the screw holes on the WC unit, and sealed with silicone.

Do not use the WC before the silicone has cured.

2

12

16

17 18

Access to Internal ComponentsDosingSetting Flush VolumeMaintenance and Servicing

2

1

1

26

19

21

23

25

20

22

24

26

27

1

23 liter

8 liter

2 liter

5 liter

Max 12 bar

Max 10 bar

27 28

29 30

31 32

28

33

Max 2,5 Nm

13

24

34 35

Max 1,0 Nm36 37

GB /For simple access to spare parts, save these instructions! tu viegli piekļūt rezerves daļām!

Installatør/Installer/ Paigaldaja/ Instaliavo/ Uzstādī tājs

Dato/Date/Kuupäev/ Data /Datums – –

Ifö Sign, Sign Fix6860, 6861, 6862, 6870, 6872,6873

Part Code IFO98381

x 4

x 4

Z 3 (pozidriv)


Version: Dec 16

Ifo - Toilet Sign Spare Parts

IFO98303 Sign Dual Flush Button - Chrome 5

IFO98308 Sign Raised Dual Flush Button - Chrome 7

IFO96763 Cover Screw Rod 1

IFO96766 Inlet Valve Assembly (Inlet valve body with locking clip, shuttle piston and rubber seal)

12

IFO96761 Inlet Pipe Assembly (Inlet tube with spigot end fitting)

14

IFO96769 Outlet Valve Assembly 10

IFO96765 Outlet Valve Seal (Cistern Seating Washer) 13

IFO96771 Inlet Float Unit 16

IFO96770 Float Rod Large Flush 17

IFO91930 Catch Lever 18

IFO96772 Valve Frame Assembly 20

IFO98951 Inner Cistern - Tank only 21

IFO90000 Inner Cistern Assembly Complete (Incl. Outlet

Valve Assembly, Inlet Pipe Assembly, Inlet Valve Assembly.

Excludes ceramic shroud, water distributor and flush button)

37

IFO90610 Cistern Cover White - Ceramic Shroud Only 11

IFO96760 Foam Seal Gasket - cistern / bowl 22

IFO91370 Water Flush Distributor / Spreader 23

IFO98949 Cistern Mounting Clip and Screw Kit 30

IFO90532 Sign Toilet Bowl S Trap, white 25

IFO90536 Sign Toilet Bowl S Trap, white, raised 26

IFO90533 Sign Toilet Bowl P Trap, white 27

IFO90441 Sign Toilet Bowl P Trap, white, raised 28

IFO98015 Floor Mounting for Waterproofing 31

IFO98381 Pan Screws x 4, White Screw Caps x 4, White Blind Cover Plugs x 4

36

IFO96199 Ifo S-Trap Pan Back Inspection Opening Cover 38

IFO96759 Inlet pipe assembly (for Sign 6893 Model Only) 15

IFO90437 Sign Toilet Bowl white (for Sign 6893 Model Only) 29

IFO91965 Water distributor (for Sign 6893 Model Only) 34

8 96767

996768

1396765

9676910

1796770

1696771

1891930

20 96772

9061011

1 96763

966602

917823 983035

983076

983087

9676612

9895121

9676022

91370 23

9676114 9675915

91965 för 6893/689434

9053327

904372925

905322690536

2890441

9894930

9801531

9838136

9061011

1 96763

983035

983087

9676612

9895121

9676022

91370 23

96773 24

9676114 9675915

91965 för 6893/689434

37 90000

9619938

www.enware.com.au Call 1300 369 273 22

NOTES

Documents

6861 Instructions... · 2016. 12. 15. · Each increment is 1 litre, adjustable from 2-5 litres, or from 2-3 litres for model 6832. unit by turning it a quarter turn clockwise and