7/30/2019 6968-C.v. (Salman U) - Experience First

1/3

Page 1 / 3

M. SALMAN USMAN

FLAT NO. C - 05, RUFI PARADISEBLOCK - 18, GULISTAN -E- JAUHARKARACHI 75290, PAKISTAN

Tel: +92-21-34631935Mobile: +92 345 2434474Email: sal.usm885@gmail.com

OBJECTIVE:A challenging position in the field of Mechanical Engineering which would utilize my skill,experience and provide opportunities for learning and professional advancement.

EXPERIENCE:

Karachi Electric Supply Corporation;Maintenance Engineer, Mechanical (Power Generation Plant)(1991 - 1995)* Experience in the maintenance of different equipments & parts of Steam Turbine Power Plant , up

to 210 MW units & Gas Turbine Power Plant up to 25 MW units. (mainly includes RotatingEquipment/Machineries).

* For Rotating equipment, planned maintenance programme to analyse system performance,identify performance trends, report forecasted problems and rectify or repair as required.

* Experience in the maintenance of various pumps, turbines & compressors, such as CentrifugalPumps, Propeller and Turbine Pumps, Rotary Pumps, Reciprocating Pumps, Metering Pumps,Vacuum Pumps, Air Ejectors, Hoggers, Reciprocating Compressors and Rotary Compressors.

* Experience in the maintenance of various pneumatics & hydraulics circuits, various high pressurevessels, heat exchangers & boilers such as: Water tube boilers up to 1800 psi & 1000 deg. Fer..Superheaters, Reheaters, Atemmperators, Economizer, Air Heaters, Low Pressure Heaters,Condensers, Gas Radiators, Towers, Evaporators, Deareators and Furnace (Cyclone Type)

* Fully conversant with the testing of high pressure vessels, boilers & other equipments such asForce Draft Fans, Centrifugal Fans, metal piping and various kinds of valves.

* Supervised and coordinated maintenance activities.* Gain an in-depth knowledge of all plant hardware and equipment in the discipline to carryout

routine and complex task on the equipment such as performance evaluation and trouble shooting.* Executed the complex mechanical work, evaluated the materials and carryout training of

Mechanical Technicians.* Collaborated with foreign engineering professionals on various projects and assignments

SGS (Pvt) Ltd. PakistanInspection Engineer (Industrial Division)(1996-2000)* Worked at the Tangri Oil Field of Union Texas of Pakistan( British Petroleum ).* Supervision, testing and inspection of stationary equipment for petrochemicals/ refinery/ power

plants.

* Performed work according to regulatory codes and standards such as ASME, ASTM, API, ANSI,AWS, for the mechanical testing/ inspection of various materials and equipments.

* Gain the experience of pipe welding inspection and NDT methods.* Gain a solid experience in field inspection, testing and quality assurance of vessel and heat

exchangers.* Capable to supervise pre-commissioning activities, flushing, painting, and insulation works.,

punch listing, hydro and pneumatic testing.* Have the experience in preparation of inspection work lists for the plants and coordinates these

functions with engineering , maintenance, operations and contractor's representatives.* Have experience in preparation of technical specification & pre-qualification of consultancy firms.

7/30/2019 6968-C.v. (Salman U) - Experience First

2/3

Page 2 / 3

Eni Pakistan Limited (An Oil and Gas Company),Mechanical Engineer (HVAC)(2001 - 2005 )* Worked on HVAC System based on Snamprogetti Engineering B.V. Philosophy.

Consultant: Fahim, Nanji & DeSouza, Consulting Engineers.* Project Management of HVAC System of Building Services for the Bhit Field Development

Project.* Supervised the Testing and Commissioning activities of Air Conditioning System based on

semihermatic screw compressor, air cooled chillers, 3 x 135 tons (Model: 30GX,HX)* Supervised Water Balancing, Air Balancing, flushing & purging.* Project tracking & scheduling using MS PROJECT software, Project costing, estimation, planning.* Costing & estimation of various projects, Preparing Bills of Materials, fulfilling the requirement of

contract agreement & tender, Site construction & site supervision, Duct fabrication & Ductinstallation.

Oceanic Group Of CompaniesMechanical Engineer (2006-Present)

* Conducted the Risk Inspection. Clients:

* National Refinery * Bosicor Oil Refinery* Jamshoro Joint Venture Ltd. I & II (LPG Recovery Plant)* Pakistan Refinery Ltd., & LOTTE Pakistan PTA Ltd in collaboration of Foreign Risk

Management Specialist, AIG (Chartis)* Engro Chemical Pakistan Ltd., Engro Polymer & Chemical Ltd., Pak Arab Fertilizer, FatimaFertilizer Co. Ltd., Telenor, Telecommunications Sites in collaboration in collaboration ofForeign Risk Management Specialist MARSH International (Insurance Broker).

* Karachi Electricity Supply Corporation (KESC),(i) Bin Qasim Power Plant, (ii) Korangi Thermal Power Plant, (iii) SITE Gas Turbine Station,(iv) Korangi Town Gas Turbine Station, (v) Transmission and Distribution.

* SEPCOL ( Southern Electric Power Company Ltd.)* Bhikki Power Plant (Pakistan Power Resources) for MARSH International (Insurance Broker).

* Nishat Power Ltd. * Nishat Chunian Power Ltd.* Telenor, Telecommunications Sites, in collaboration of Foreign Risk Management Specialist,AIG MEMSA, Inc. (Reinsurance)

* Pakistan International Container Terminal Limited,* Conducted Due Diligence for METRO & MAKRO Stores on behalf ofMARSH International

Insurance Brokers, Principal: METRO Asset Management. Wrote report in WEB platform ofMETRO Asset Management.

EDUCATION : Bachelor of Engineering ( BE ) in Mechanical, 1990NED University of Engineering and Technology

MS LEVEL COURSES:NED University of Engineering and Technology, 2002Field of Study: Energy SystemsCourses: * Advance Heat Transfer * Combustion Engineering

DESIGN ENGINEERING TRAINING: 2004

* Making of Fuel, Air, Steam, Water System audits and efficiency improvement proposals.* Selection of pumps, cooling towers, motors, steam pipeline size and water / condensate pipeline

size & valves.

7/30/2019 6968-C.v. (Salman U) - Experience First

3/3

Page 3 / 3

* Thermal balance calculations of Co-generation Plant. Steam consumption calculations of aTextile Factory. Flue gas analysis calculations

* Using the softwares: Spirax and Engineering Power Tools.

SEMINARS: * Engineering Insurance (2007)* Loss of Profit Insurance/Business Interruption Insurance, (2008)* Risk Management (2010) * Fire and Safety Convention (2010)

PROPERTY RISK CONSULTING TRAINING: 2011,Frankfurt Germany, by MARSH Intl. Insurance BrokersMain Topics: * Fire Science & Extinguishment * Basic Property Risk Control & Survey

* Insurance Risk Mgnt. * Building Construction * Fire Water Supplies & Hydraulics* Automatic Sprinklers & Spray Systems * Management Programmes * Loss Estimates* Warehousing * Special Hazards * Special Loss Prevention & Extinguishing* Project Development * Report Training

COMPUTER SKILLS:LANGUAGES : C++, C, pro*C, BASIC, PL/SQL.OPERATING SYSTEM : Unix( ultrix, 5900) & (sco system v/386 rel. 3.2), AIX (IBM risc 6000),

AS-400, Windows 98 & 2000, vax/ vms(dec.6430), novell network (ver.3.12)SOFTWARE PACKAGES : MS Project, AUTOCAD 2000,Oracle, MS office, MS access, MS power

point.

AFFILIATION : Pakistan Engineering Council.(Registration No. 8615), Life Member.

REFERENCES : Available if Required.

PASSPORT NO. : BG2853421

DATE OF BIRTH : 25-12-1966

NATIONALTY : Pakistan