7-BAND EQUALIZER

1. Select the desired location to mount the unit under the dashboard.

2. Drill (4) 4.2mm diameter holes. Fix the mounting bracket under the dash or in the rear of the car with (4) 4x14mm tapping screw. Be careful when drilling to avoid damaging existing wiring under the dashboard.

3. Mount the unit to the mounting bracket with (4) 3x10mm machine screw.

Adjusts the output level of subwoofer

Adjust the output level of the volume

Switch between the AUX or MAIN inputs

Switch between the MPT or second source inputs

Adjust the volume of the 4 front and rear speakers

Control the frequency response of the Booster or cut with the four tone controls each 50,125, 315,750,2.2K, 6K, 16KHz.

Select Low Pass frequency: 60Hz or 90Hz

1. When a radio, cassette, or CD player is connected to this unit and is turned on, the unit will turn on.

2. Use the fader controls to adjust the sound balance between the front and rear speakers.

3. Rotate the equalizer controls to achieve the desired sound quality.

4. Use the subwooder output level control on the front panel to adjust the sound levels of the subwoofer.