00:08:de:1a:1e:06

7

1

2

8

9

10

11

Open the Wi-Fi connection

settings

Enter the name and the

password of your home

network. Click „Connect“.

A green LED will starts

blinking. (“WiFi connection

attempt“).

Wait until the device

connects to your home

network. If the connection

is done, the green LED will

be on continuousely.

Choose your home

network in Wi-Fi

connection settings of

your smartphone /tablet.

Launch the MCS 300

application in your

samrtphone or tablet and

chosse „local network“.

Install the thermostat

MCS 300 according the

installation manual.

Double click the

„DEFAULT“ button on

the front of the

thermostat MCS 300.

Quick

start

2x

3

00:08:de:1a:1e:06

4

5

6

Open the Wi-Fi settings in

your smartphone / tablet

and choose MAC adress of

the thermostat (same like

the number on the front

panel).

Enter the password

1234567890 and connect

the thermostat with your

smartphone / tablet.

Wi-Fi network settings (router settings)

SSID network name:

Wi-Fi network name:

Wireless network mode:

Channel range:

Channel:

Authetication method:

WPA encryption:

any

(for default network MCS_default)

any

(for default network 12345467890)

AUTO

40 MHz

AUTO

WPA-AUTO-Personal

(WPA/WPA2 Personal)*

AES

Launch the MCS 300 application in your smartphone or

tablet and chosse „local network“.

* the thermostat MCS 300 supports WPA Personal authetification method