Embed Size (px)
Citation preview
Product Features n Supports 72 subscriber interfaces
of ADSL2+, ADSL2 and ADSL n Supports wetting currentn Supports onboard Metallic Line
Testing (MELT)n QoS supportn Enhanced VLAN mapping: VLAN
translation based on MAC, subnet, protocol and port
n DHCP support with option 82n Internet Group Management
Protocol (IGMP) proxy
hiX 5600 IU_ADSL72_ADL-E372-port ADSL2+ ADL MELT Line Card
For Carriers, who are seeking to extract the maximum performance from their copper network infrastructure on long all digital loops.
The hiX 5600 offers a complete solution for the carrier’s network infrastructure supporting the delivery of different kinds of high-speed broadband access services. Providers striving to deliver high-bandwidth services from existing copper infrastructure. Long loops requires an ADSL2+ line card.
The ADTRAN 72-port ADSL2+ ADL MELT line card provides many useful features like: wetting current, rate adaptation modes, spectrum shaping, virtual noise, dynamic transmission, power control and retransmission.
The ADSL2+ line card is optimised for ‘‘All Digital Loop’’ based bands and spectrum compatible to G.992 Annex J. This splitter less application is supported by a special onboard MELT feature for remote line testing from the network management system.
The oversubscription (backplane versus line port capacity ratio) is equal one in case of all ADSL2+ lines use concurrent 17 Mbit/s, where realistic the loop lengths are varying and therefore the maximal bandwidth is distributed by ranges from 6 up to 25 Mbit/s. This shows a cost effective and non-blocking design also in case of concurrent realistic applicable full load.
Each line card IU_ADSL72-ADL-E3 occupies one line card slot of the hiX 5600 system, which supports broadband data delivery and triple play (voice, video, and data) and next gen Voice over IP (VoIP) via VoDSL. Up to 1008 subscribers can be supported if this card is used in a fully equipped hiX 5635 chassis.
The service modes and line characteristics are determined by an individual profile configuration of the port. The line card supports ADSL2+, ADSL2 and ADSL on a per-port basis. The traffic management is configurable to each individual port. Up- and downstream bit rates can be configured independently. Policing and shaping per quality of service queue can support time critical services like voice or video data.
Environmentally hardened, the line card can be installed in both Central Office (CO) and Remote Terminal (RT) environments.
The line card is supported on all the hiX 5600 series chassis, enabling carriers to deploy ADSL2+ from new chassis as well as existing deployed infrastructure.
ADTRAN, Inc.International Department
U.S. Headquarters901 Explorer Boulevard
Huntsville, Alabama 35806 www.adtran.com/global
+1 256 963 8000+1 256 963 6300 fax
International Customer Service+1 256 963 8716
Headquarters—EMEAADTRAN GmbHErika-Mann-Str. 25
80636 Munich-Germany+49 89 411097 111
Central-/East and West Europe+49 89 411097 111
South Europe+49 89 411097 111
North Europe and CIS+49 89 411097 111
Middle East and Africa +49 89 411097 111
Asia+852 3187 7111
Australia/New Zealand +61 3 9658 0500
Mexico and Central America+1 256 963 3321
+1 52 55 5280 0265 [email protected]
South America+1 256 963 3185
[email protected]@adtran.com
ADTRAN believes the information in this publication to be accurate as of publication date, and is not responsible for error. Specifications subject to change without notice. ADTRAN is a registered trademark of ADTRAN, Inc. and its affiliates in various countries. All other trademarks mentioned in this document are the property of their respective owners. ADTRAN warranty duration and entitlements vary by product and geography. For specific warranty information, visit www.adtran.com/warrantyADTRAN products may be subject to U.S. export controls and other trade restrictions. Any export, re-export, or transfer of the products contrary to law is prohibited. For more information regarding ADTRAN’s export license, please visit www.adtran.com/exportlicense
ADTRAN is an ISO 9001, ISO 14001, and a TL 9000 certified supplier.
I61132102G1-8A December Copyright © 2014 ADTRAN, Inc.
All rights reserved.
Mechanicaln Dimensions: 390 mm x 25 mm x 235 mm
(H x W x D)
Interfacesn 72 ADSL2+/ADLS2/ADSL Application without
Splitter Only (All Digital Loop/Naked DSL)n 1.25 Gbit/s Backplane Interface
Capacitiesn 72 ADSL2+/ADSL2/ADSL Interfaces per
Line Cardn Up to 25 Mbit/s Download with ADSL2+n Up to 3 Mbit/s Upload with ADSL2+
Regulatory Standardsn ETSI EN 300 019n ETS 300 753n DTAG TS 0364/96n ETSI EN 300 386n DTAG 1TR9n ETS ES 201 468n ETSI EN 60950n ITU-T K.27/35n ITU-T K.20/45
(with External Primary Protector GTD 420 V)n ITU-T G.992.5, Annex J for ADSL2+n ITU-T G.992.3, Annex J for ADSL2n ITU-T G.992.1, Annex J for ADSLn Line Test: MELT, DELT Single Wire
Interruption Detectionn Wetting Current: Approximately 2mA
Service Modesn PSD Shapingn Virtual Noisen Power back-off (Upstream and Downstream)n Upstream and Downstream Bit Rate
Independently Configurablen Adjustable Minimum Impulse Noise Protection (INP)n Adjustable Maximum Delay
Environmentaln Operating Temperature: -40° C to +70° Cn Storage Temperature: -40° C to +70° Cn Relative Humidity: Up to 95% at 50° C,
Non-condensing
Managementn ACI-En Remote Management via SNMPn Ethernet Interface on CXU for SNMP and Telnetn Craft Interface on CXU
Product Specifications
hiX 5600 IU_ADSL72-ADL-E372-port ADSL2+ ADL MELT Line Card
Ordering InformationEquipment Part No.IU_ADSL72_ADL-E3 1132102G1
Splitterless
GigE or10GE
ADSL2+as naked DSL
IP/Ethernet
201202
203204
205206
207208
FAN
ILL317A_hiX5625_ADSL72_ADL-E3
VoIP
hiX 5625MSAN
