722manual Eenglish NEW

8/10/2019 722manual Eenglish NEW

http://slidepdf.com/reader/full/722manual-eenglish-new 1/33

Dear customer,

Thank you very much for your purchasing of the 2 way car alarm products we manufactured.

1. This product is designed to install on all 12V universal vehicle. The system possesses multi-

functions. For your understanding about the product, read the instruction carefully to implement

its features fully.2. If the system manual shows note like “refer Alarm function R programmed!, this function "ecomes effective only after

installation of additional e#uipment as is re#uired "y the system and also needed to "e program.

$. %esides the functions descri"ed in the manual, the system can also support the following products&

A) ngine !tart "odule# $hen combined %ith engine start module, it is possible to remote control and

monitor of vehicle li&e engine start or shutdo%n 'effective range about 1((( meters).

%' ()* *odule +*o"ile hone *odule'& -hen com"ined with ()* module, if the vehicle is in an a"normal condition,

system will automatically notify twoway remote. *oreover, it will send a short message +)*)' and make a phone call to

inform car owner a"out car condition. /n the phone, ()* module will automatically play voice message which tells car

owner0s car condition. /f course, from outside call in to the machine go through the voice message guide to make

command such as system arm1disarm, door lock1unlock, engine start1 shut down etc 3ou even can use short message

+)*)' to control system. The system can "e programmed to hold 4 different sets of phone num"ers to inform car owner.

%ecause of using the telephone net, car owner at anytime and anywhere to know car condition.

5' )atellite Tracking *odule +()*1()1(I)'& -hen com"ined with satellite tracking module, all the a"ove functions in +%'

()* *odule would "e included in the system. *oreover, car owner can use short message +)*)' to notify location of the

car. %ecause the system includes (I) +(eographic Information )ystem', car owner can use the short message displays in

mo"ile phone in order to find out the location of the car. *essage also told owner car status such as if the car is on the move

or not and with report of speed of the car +km1hr'. -hen car had "een lost, the message would "e a"le to trace it. This

function helps car owner to search car "ack without the need of 6map, DA and other people0s assistance.

7



)ystem function guide2way 85D Transmitter indication $

Transmitter control #uick ta"le 4

*ultifunction switch #uick ta"le 9

Remote door lock1arm :

-indow auto roll up :

Defective ;one "ypass :

Remote door unlock1disarm :

Dome light :

)ecurity diagnostic report :

Auto relocked :

Door auto lock1unlock upon ignition <

)ensor "y pass <

=ow to ad>ust internal shock sensor sensitivity <

Auto arm ?

Remote alarm audi"le1mute mode ?

Remote valet /@ 1/ mode ?

Remote check car status

Remote car search

Remote active channel B 7

Remote panic

Remote anticar>ack

)witchcontrolled anticar>ack stand"y and cancel 7C

)top and go 77

Autoimmo"ili;ed mode 77

Alarm indication 77

*anual disarm 72

se I@ secure code procedure 72

=ow to use I@ code to disarm the system 72

=ow to change I@ code for security needs 7$

8earn codes of the new remote transmitter 7$

Reminder of allowed num"er of remotes 74

I@ )witch test for alert 8 6 D 74

Indicator alert 8 6 D ta"le 74

=opping code transition 79

8ow "attery indicator for transmitter 79

/utofrange indication 79

Transmitter0s "utton locked1unlocked 79

Transmitter light 79

2



/ther Remote control unction 7:

Remote engine start and shutdown 7<

iEed time autostart 7?

6Etra engine running timer 7?

Alarm installation guide

*ain system wire guide 7

Alarm function R program 2CRestore R alarm function to factory default 2C

Alarm function R program ta"le 2C

Alarm function R program ta"le eEplanation 27

Door lock wire diagrams 22

Alarm module wiring diagram 2$

)tart function R program 24Restore R start function to factory default 24

)tart function R program ta"le 24

)tart function R program ta"le eEplanation 24

6ngine start module wire guide 29

The 2way 85D transmitter displays more the 2C different screen to provide realtime indications for feature activation and

$

2- Way LCD transmitter One way transmitter



system status. The different display indication are shown "elow for reference

7. Disarm 2. Audi"le arm $. )ilent arm 4. )hock trigger "ypass 9. %utton locked

:. -arnaway trigger <. )hock trigger ?. Door open . =ood open 7C. Trunk open

77. Falet mode 72. Anticar>ack 7$. Ignition key on 74. Auto immo"ili;e 79. Auto arm

7:. %rake pedal 7<. 6ngine running 7?. iEed auto start 7. Receiver indicator 2C. 8ow "attery

Transmitter control #uick function ta"le

The twoway and oneway remotes0 function ta"le

• Indicates “ress and release! of specified "utton

or 2 way remote, it indicates “ ress and hold specified "utton! for 7 second +85D vi"rates and "eeps' for level shift

or one way remote, it indicates “ ress and hold specified "utton! for 7 second +86D lights green' for level shift

• • +)7 ' Indicates “ress "utton twice within 7 sec!.

4



or 7way and 2way +85D' transmitters "utton @ote

unction *7 + *2 + *$ + *4 + *9 +

Arm +8ock' 7 • Ignition /

Disarm +nlock' 2 • Ignition /

8ock 7 • Ignition /@

nlock 2 • Ignition /@

All )hock )ensor "y pass 7 •• +s7' At armed

Falet *ode /n1 /ff 7 7 • At disarm mode

Audi"le 1)ilent choice 4 • Ignition /

Remote 6ngine )tartG shutoff 2 2 • need 6)* Ignition /

iEed auto start 2 7 • need 6)* Ignition /

)top and go 2 • 7 • Ignition /@

5heck status $ • Any time

5ar inder $ •• +s7 ' Any time

Trunk Release $ $ • Any time

anic 7 with 2 Ignition /Remote Anti car>ack /n 7 with 2 Ignition /@

Remote Anti car>ack /ff 2 • Any time

Immo"ili;e /n1/ff 2 $ • Any time

8ast door arm /n1/ff 2 4 • Any time

%utton lock /n 7 with 4 +press and hold 7sec' Any time

%utton lock /n 2 with 4 +press and hold 7sec' Any time

Ad>ust shock sensor 4 4 • At disarm

9



Reset1lamp 9 • /ther function

*ultifunction switch #uick function ta"leI g

ni t i onm u s t " e / @

Function Multi-function switch Process

To turn on antihi>ack

stand"y

ress 7 time switch 86D

and parking light one time

)ystem enters anticar>ack stand"y. If triggered "y door,

Anticar>ack first stage is initiated

To turn off antihi>ack

stand"y

ress 7 time switch again 86D and parking flash three time or If ignition is turned off,

anticar>ack stand"y mode was cleared

At antihi>ack at firsttrigger stage turn off

=old switch $ sec siren

chips

If ignition turnoff is followed "y siren chirps. Anticar>ack

mode was cleared

At antihi>ack at full stage

trigger turn /ff


chips

If ignition turnoff is followed "y siren chirps. Anticar>ack

mode is cleared, "ut still in arm1lock mode

At normal time Falet

mode /n1/ff


chips

If ignition turnoff is followed "y siren chirps Falet mode/n1/

*anual

disarm

Then open

car door

ress $ times , siren chips Ignition off siren chips H *anual disarm system.

If ignition turnoff is followed "y siren chirps. *anual disarmis done.

*anual arm ress $ times, siren chips If ignition turnoff is followed "y siren chirps.. Then 2C sec

later, system enters arm mode..

Function Multi function switch Process

Immo"ili;e active reset

/ff

ress 7 time switch Disa"le Immo"ili;ed function

:



Ig

nit

io

n

mus

t

"e

/

Reset new I@ code ress 4 times, siren chips Ignition /@ress 7 times siren chips H )et 7st new I@

coderess 7 times siren chips H )et 2nd new I@ code

Alarm function programma"le

ress 9 times, siren chips If ignition turnoff is followed "y siren chirps. )ystem enters

alarm function programma"le stage.

)tart function programma"le ress : times, siren chips If ignition turnoff is followed "y siren chirps. )ystem enters

start function programma"le stage.

8earn codes of new

remote.

ress < times, siren chips Ignition /n is followed "y siren chirps system enter learn

codes mode.

Reset to alarm function

factory default

ress times siren chips Ignition /n is followed "y siren chirps. ress switch one

time, system chirps, press remote "utton* +)ystem resets

function to factory default

Reset to start function

factory default

ress 7C times siren chips Ignition /n is followed "y siren chirps. ress switch one

time, system chirps, press remote "utton* +)ystem resets

function to factory default

Remote door lock/arm audio and mute! alert

7. -hen system enters arm mode, alter 86D flashes to avoid thief "reak in. If car under security system, door, trunk, hood,

ignition, "rake and shock sensor would "e guarded. If system had "een triggered, engine can0t start "y using the key and

siren chirps and 2way remote gets triggered message simultaneously.

2. ress and release "utton7 /)iren chirp once +or no chips if in mute mode' with parking light flash. The car door is

locked and system enters arm mode. Refer picture @o.2 or $

$. Window auto roll u" / After the main system enters arm1lock.it auto roll up the electronic powered window +an

accessory is re#uire refer Alarm function R programmed : times '.4. Defecti#e $one %y"ass/If system enters arm mode. the system siren sounds long chirps 4 times and1or the remote unit

<



sounds alarm. The main system detects a defective ;one somewhere as the case of unclosed.+The remote shows triggered

;ones on its 85D'. The system will automatically "ypass the defective ;one and enter arm mode. After the defective ;one

is corrected. The system enters full arm mode.

Remote door unlock/disarm7. -hen system enters disarm, security system will disa"le.

2. ress and release "utton2 /The main system will unlock the door. )iren chirps 2 with flashes of parking light

+/r no chips if select “)mart )iren! mode. Refer R programmed ? times'. Refer picture @o.7

$. Dome li&ht/After the main system enters disarm1unlock or while in arm mode. If the alarm is triggered. The dome light

will automatically turn /@. This can illuminate the car0s interior for owner0s checking need and is also a warning against

theft. +an accessory is re#uire refer Alarm function R programmed : times'.

4. 'ecurity dia&nostic re"ort and sta&e disarm/After the main system enters disarm if siren chirps 4 times or remote unit

makes 4 "u;;er sounds. This indicate the system detected some defective ;ones +The triggered ;ones will appear in the

remote 85D'. And need press and release "utton2 The main system will unlock the door. The alert 86D flashes until

turn on ignition "y key.

urpose& To indicate if the vehicle has "een triggered in arm mode

9. (uto relock /After the main system enters disarm if the door is not opened within $C sec after it is unlocked "y the

remote unit, the main system will automatically lock1arm itself +refer Alarm function R programmed < times' .

urpose& Avoid system enters disarm a"normally +for eEample, accidentally press remote "utton.' *oreover, system will

automatically enter arm mode again.

)* Door auto lock/unlock u"on i&nition

9.7' In disarm1unlock into the car. -hen the ignition key is turned to “/@! all the car doors close and pedal "rake is

depressed.will immediate auto lock door.+refer Alarm function R program 2 '

9.2' %efore leaving the car. If the ignition key is turned to “/! with the key all the car doors will unlock.

?



urpose& -hen driving, door enters auto lock1unlock according to this feature has "een set up or not.

'hock 'ensor %y "ass

7. The sensor "y pass feature is the system armed the shock sensor will ineffective.

2. The system must "e in arm mode then press and release "utton7 twice. The main system shock sensor all stage "ecomes ineffective. Refer picture @o.4

urpose& 5ar park in a noisily environment.

+ow to ad,ust internal shock sensor sensiti#ity

27.Readyto accept lightim pact

22.Ready to accept heavyimpact

2$.ailure and >ump out 24.5ustomers0s ad>ustmentmode completed

7. )ensor can only "e ad>usted under the disarm mode.

2. To enter sensor ad>ustment mode, press G hold4 first , then press and hold4 again, system will sound 2 long

"eeps.

$. -hen 85D displays icon +Refer picture @o.27' following system0s 7 long "eep, eEcert light impact on to the car. )ystem

will sound one short "eep to confirm this setting is done.

4. Again eEcert heavy impact on to the car when icon +Refer picture @o.22' is shwon. If system sounds 2 short "eeps, this

setting is done.

9. )ystem will automatically >ump out.the sensor ad>ustment mode in the end.

:. During any process of sensnor ad>ustment under 2 conditions "elow, the settings will "e nullified

A' If “light impact! is not received "y the system within 7C sec while picture @o.27 displays. The system will sound 4



"eeps and 85D display icon +Refer picture @o.2$' to notify “ nullify!.

%' If “heavy impact! is weaker than “light impact!, the system does not recogni;e this and will nullify this process.

6Ecert “heavy impact! again.

<. If sensor sensitivity needs read>ustment, follow the a"ove procedure from step 2 to 9.

(uto arm without or with lock! u"on closin& Last door

7. The auto arm feature allows the system to arm automatically without user intervention.

2. ress and hold "utton2 for level shift ,then ress and release "utton4 to select /n1/ff Auto arm. If select it in

/@ mode the 85D remote will show it. Refer picture @o.79

$. -hen auto arm mode is /@/5lose all the doors first. Then turn ignition to /. /pen the door to leave out and close it.

)iren will sound as confirmation the system has entered 7C sec countdown "efore auto arming is activated.+auto arm with

doorlock or without locking refer Alarm function R program 4 '.

urpose& -ithout using hand to control remote, the system enters arm mode itself.

4. At "elow situation the auto arm function will disa"le.

A' If the car any door is opened while the ignition is form /@ to / .

%' During into 7C sec countdown the door close twice.

urpose& Remind user that system enters auto arm and door has "een lock.

Remote alarm audi%le/mute mode

7. -hen remote system, the siren can "e selected audi"le1mute mode Refer picture @o.2 or $.

2. .&nition must %e at OFF "osition. ress and release "utton4 to select the audi"le or mute alert modes.

$. If system choose “audi"le mode!, siren sounds different chirps depending on remote command.

4. If system choose “mute mode!, siren will not response with sound against any remote command eEcept for car search.

7C



Remote #alet O /OFF mode

7. -hen valet turn /@, the system0s all functions are inoperative eEcept for the remote door lock1unlock and trunk releases

and check search car remain opera"le

2. The system must "e in disarm mode. ress and hold "utton7 for level shift ,then ress and release "utton7 to

select /n1/ff valet /n or /. If select it in /@ mode the 85D remote will show it. Refer picture @o.77urpose& Avoid others to make unnecessary commands. or eEample, friends or repairer play your remote.

Remote check car status

7. ress and release "utton$ to check the current car status. The parking light flashes $ times.

2. The current car status will show on remote 85D.

Remote car search

ress and release twice "utton$ The system siren chirps : times with : flashes light to help easily locate the car.

Remote acti#e channel 0 1

ress and hold "utton $ for level shift ,then ress and release "utton$ To active channel B7 +for eEample' trunk

release. The parking light will flash. Refer picture @o.7C +refer Alarm function R program '.

urpose& ser can use this function in order to control car e#uipments.

Remote "anic

7. .&nition must %e at OFF "osition*

2. ress and hold7 with2 "utton together , the parking light flashes $ times and siren chirps $ times. The system

auto into arm and lock mode.

urpose& To panic and avoid trespass.

77



Remote anti-car,ack

1* .&nition must %e at O "osition*

2. ress and hold7 with2 "utton simultaneously. The system will enter full stage of anticar>ack mode.

$. -hile the remote anticar>ack is "eing activated, press and release "utton2 "utton to disa"le this function.urpose& 6ngine will shutdown and can not start any more when car has "een ro""ed.

'witch-controlled anti-car,ack stand%y and cancel

1* urn O/OFF anti-car,ack at stand%y mode/

7.7' o turn O anti-car,ack stand%y mode/Ignition must "e at /@ and with all the doors closed if push multi function

switch one time ,the system will enter anticar>ack stand"y mode.

7.2' Disa%le anti-car,ack at stand%y mode/Just turn off ignition without opening the car door. The system will >ump out

of anti car>ack stand"y mode.

2* o tri&&er anti-car,ack mode/

2.7' ri&&erin& of anti car,ack first sta&e mode /During anticar>ack stand"y mode. If the door is opened and close, the

system enter anticar>ack trigger first stage mode. The parking light flashes for $C sec to show first stage mode is initiated

"ut the siren did not chirps the engine is running normally at this stage. If first stage mode didn0t interrupted on time, the

system will enters second stage anticar>ack mode. Refer to picture @o.72

2.2' 3nter second sta&e of anti-car,ack mode/ollow first stage system will auto into anticar>ack second stage mode the

parking light flashes with siren chirps for $C sec when this stage initiates. 6ngine will keep on running. If this stage is not

interrupted, full anti car>ack function will "e triggered.

2.$' o disa%le first and second sta&e anti-car,ack mode/ress and release remote "utton2 or +press and hold multi

function switch $ sec. the siren chirps then turn ignition /'. The system will >ump out of anti car>ack mode.

4* 3nter full sta&e of anti-car,ack mode/ollow second stage system will auto into anticar>ack full triggering stage

72



mode. system have A0% kind of state.+refer alarm R programmed 77 '.

A' (nti-car,ack safe mode/The parking light flashes with siren alert which time if "rake pedal is depressed the

engine runs chokes for 49 sec then shuts down the engine. If in this time the ignition still at /@ position the parking

light and siren continuous flashes and alert.

@ote/)elect safe mode the main unit orange1violet wire needs connect to pedal "rake switch%' (nti-car,ack auto mode/The parking light flashes with siren alert the en&ine runs chokes for 49 sec then shuts

down the engine. If in this time the ignition still at /@ position the parking light continuous flashes and siren alert.

5* o disa%le full sta&e of anti-car,ack mode/The system have A0% kind of way to turn / full stage of anticar>ack

+ refer alarm R programmed 9 to controlled "y secure I@ code or not '.

A' or system uncontrolled "y I@ code/ress and release remote "utton2 "utton +or' press G hold multi

function switch for$ sec. Turn ignition / when siren chirps. Anticar>ack triggering mode is disa"led "ut system

still remains in arm mode.

%' or system controlled "y secure I@ code/Anticar>ack triggering can only "e done "y means of secure I@ code.

Refer to secure I@ code procedure.

'to" and &o

7. To identify engine is running "y key and ignition at /@ position

2. /pen the door then get off the vehicle and don0t close the door.

$. ress and release "utton2 then close all the car doors.

4. ress and release "utton7 of the remote. The system enters arm1lock mode "ypassing shock sensor and ignition.

+ If the system doesn0t enter arm mode within 79 seconds, the stop and go feature will not be available.)

urpose& 5ar is under security system when user leave car in short period of time and engine is still running.

(uto-immo%ili$er mode O/OFF

7$



7. nder this mode feature engine start "y the ignition key is disa"led

2. ress and hold "utton2 for level shift ,then ress and release "utton$ to select /@1/ autoimmo"ili;er mode.

The 85D remote shows only valet /@ mode if valet is selected /@. Refer to picture @o.74

$. At autoimmo"ili;er /@ mode the system automatically enters immo"ili;er mode +engine defeat relay is activated' after

$C sec from ignition /.4. The immo"ili;er mode will indicated "y dash 86D whenever the ignition is turned /@.

9. o clear immo%ili$er acti#ated mode/ress and release "utton2 of the remote unit +or' turn the ignition / first

and then push the 617 time the multi function switch.

urpose& The engine start is disa"led even with the ignition key. This feature give protection to car if car owner forgets to do

command when leaving his car.

(larm indication

7. In arm mode/If the car detects any impact, the shock sensor0s first stage is triggered. arking light will flash. Refer to

picture @o.:

2. If the heavier impact is detected "y the main system. the siren "lurts for 2< sec with parking light flashing for the same

time. Refer to picture @o.<

$. If the trigger is caused "y other means like dooropen, trunk1hood open or ignition “/@!. The siren "lurts $C sec with

parking light flashing for the same time and the engine run is disa"led. Refer to picture @o.? 0

0

7C 0

.7$.

4. -hile the alert is "eing triggered in arm mode, press and release "utton2 once to terminate alarm triggering The 2nd

press and release of "utton2 makes the main system enter unlock1disarm mode. The alert 86D flashes until turn on

ignition "y key.

Manual disarm

7 -hen remote had lost or "roken use manual disarm function to cancel arm mode.

74



2 @eed to "e confirmed that system is settled in which of following situations in

order to set up this function. The system have A0% kind of way to manual arm or disarm system + depend alarm R

programmed 9 to controlled "y secure I@ code or not '.

A' For system uncontrolled %y secure P. code/-hile system at arm mode If user want to manual to “disarm!

system . Turn the ignition key to /@ position and need open the door. ush “$0 time the multi function switch. Thenturn off ignition the siren will chirp to indicate "ecome disarm.

%' For system controlled %y secure P. code/Refer use I@ code procedure.

8se P. secure code "rocedure

7. The system had to programmed to secure I@ code mode "efore if want to using I@ code procedure to manually disarm

and to deactivate the antihi>ack in finally stage active mode. If didn0t programmed to I@ code mode that can0t using I@

code to disarm system.

2. The system default I@ code digit num"er is

+ow to use P. code to disarm the system

$.7' Turn the ignition to /@ position and it is necessary to open car door.

$.2' ress and release the multi function switch 9! times +K is “7!as the factory default or the new 7st digit if reassigned'

$.$' Turn the ignition /. Then turn /@ the ignition again.

$.4' ress and release the multi function switch :! times +: is “7!as the factory default or the new 2nd digit if reassigned'

$.9' Turn the ignition /. After the system verifies I@ codes, it disarms itself.

$. The I@ code can "e reassigned "y the car owner. Refer to the procedure to enter I@ setting mode and reassign a new

I@ code if desired.

+ow to chan&e P. code for security need

79

7st digit code 2nd digit code

9! time :! time



7. irst ignition had to turn at / position.

2. ress and release multi function switch;5;times then turn the ignition /@ which is followed "y 4 siren chirps.

$. ress multi function switch once then siren a chirp to confirm into set new I@ 7st digit code 9! time. To using remote to

set first digit code refer "elow.

$.7' To assign I@ code digit num"er at “7! time. ress and release7 "utton remote unit. The siren 7 chirp to confirm.$.2' To assign I@ code digit num"er at “2! time. ress and release2 "utton remote unit. The siren 2 chirp to confirm.

$.$' To assign I@ code digit num"er at “$! time. ress and release$ "utton remote unit. The siren $ chirp to confirm.

$.4' To assign I@ code digit num"er at “4! time. ress and release4 "utton remote unit. The siren 4 chirp to confirm.

4. ress multi function switch once again then siren 2 chirps to confirm into set new I@ 2nd digit code :! time. To using

remote to set first digit code refer "elow.

4.7' To assign I@ code digit num"er at “7! time. ress and release7 "utton remote unit. The siren 7 chirp to confirm.


4.$' To assign I@ code digit num"er at “$! time. ress and release$ "utton remote unit. The siren $ chirp to confirm.


9. Turn the ignition to / finish set I@ code process.

:. 3ou are advised to note down the new I@ codes for your future reference.

urpose& ser can having his1her own I@ code for security need.

Learn codes of the new remote transmitter

7. Ignition had to at / position.

2. ress multi function switch*<+times. Then immediate turn ignition to /@ position. The siren G 86D indicator will “<!

chips and "urn the mean is system into learn newly remote mode process.

$. ress and release newly remote "utton$ G 4 simultaneously till the siren chirps 7 time confirming code learning is

completed.

7:



4. Then other remote did process $. To allow the main system learn coding of each transmitter. +*aEimum 4 remotes can "e

learned "y the system'.

9. The system will automatically >ump out of learning mode if no signal is received within : sec. from the last signal or turn

/ ignition.

@ote/The prememori;ed coding will "e erased each time the learning mode is activated. Redo the code learning in thiscase.

Reminder of allowed num%er of remotes

)ecurity reason. This allows you to know how many remotes are memori;ed up to date.

Turn ignition to /@ position. ress and release "utton$ of remote and o"serve 86D flash pattern. or eEample 2 times of

flash Indicates that system has already learned 2 remote units.

urpose& Allow car owner knows how many remotes are memori;ed uptodate +Avoid others to make copy of the remote "y

using original remote'.

P. 'witch test for alert L 3 D

7. The system must "e in disarm mode with the ignition /@

2. If all the switches are in good condition, opening of any of car door, trunk or hood can make the 86D flash. The 86D

turns off when they are closed.

urpose& Remind driver that which district is unusual.

.ndicator alert L 3 D ta%le

Different stand%y modes .&nition at OFF "osition L3D %linkin& .&nition at O "osition L3D %linkin&

)ystem in arm mode L L L L L L L L L L

Immo"ili;ation active %urn on

7<



Falet mode /@ %urn on

6ngine start %urn on

iE time auto start LL LL LL LL

=i>ack trigger first stage mode L L L L L L L L L L

Reminder allowed num"er remotes Depend how many unit and flash thatAny ;oon in switch test If any ;oom trigger will L L L L

+o""in& code transition

This system0s transmission uses hopping code technology that ensures total prevention from "eing counterfeited "y code

gra""ers.

urpose& Avoid others from "eing counterfeited "y code gra""ers

Low %attery indicator for transmitter

-hen low "attery icon displays on the remote 85D, its "attery is a"out to eEhaust. Insert the new "attery*Alkaline "attery of

si;e AAA is recommended +Refer picture to @o.2C

Monitorin& stand%y indication

7. If the 85D shows flashing antenna, the remote is monitoring the car. Refer to picture @o.7

2. After 7 minute from the system disarm, the remote stops monitoring and its antenna disappears from

85D.

urpose& ser can monitor any condition happens for the car.

Out-of-ran&e indication

-hen operator the remote0s function "utton and sound low tone "uthe mean is the remote out of range from the car.

7?



urpose& ser knows if the remote function or monitoring is outofrange or not.

ransmitter7s %utton locked/unlocked

7. ress and release "utton4 with7 the remote0s key pad is locked.. Refer to picture @o.9

2. ress and release "utton4 with2 the remote0s key pad is unlocked.urpose& Avoid kids play remote and accidentally press remote "utton.

ransmitter li&ht

ress and release the remote light will "urn few second.

Other Remote Control Functions

The 85D remote control unit has "asic features of +a' 68 "acklight +"' different time indication of *Real time, alarm clock,

countdown timer +and follow the procedure as "elow/

/peration of keys unctions

@otes/ ress *9 + %acklight /@ +automatic turnoff after few sec'

ress and hold *9 +

$ secs

6ntry1eEit of ad>ust mode "y hour, confirmed "y 2

"eeps, eEit "y 7 "eep.

While in each time entry mode<

ress*$ +to choose “/@! or ad>ustment

upwards

ress and hold*$ +for #uick ad>ustment

upwards

ress*4 +to choose “/! or ad>ust

downwards

ress*9 +7 times *inute entry +ad>ust mode'

ress*9 +2 times =our entry +to ad>ust start clock'

ress*9 +$ times *in entry +to ad>ust start clock'

ress*

9+

4 times /@1/ choice for start clockress*9 +9 times =our entry +to ad>ust countdown timing'

7



ress and hold*4 +for #uick ad>ustment

downwards

ress*9 +: times *in entry +to ad>ust countdown timing'

ress*9 +< times /@1/ choice for countdown timing

ress and hold 7 sec

*7 +M*4 +

85D Remote 5ontrol "utton lock /@

ress and hold 7 sec*2 +M*4 +

85D Remote 5ontrol "utton lock /

(dditional en&ine start module is re=uired to usin& %elow function

Remote en&ine start and shutdown for*auto &ear car+

7. recondition for to allow this features is

7.7' The car must "e in neutral gear or parking mode

7.2' =ood must "e closed. Refer to picture @o.

7.$' Don0t depress pedal "rake. Refer picture to @o.7:

7.4' Falet needs off mode. Refer picture to @o.77

2. ress and hold "utton2 for level shift ,then ress and release "utton2 to remote engine start +or' shutdown.

2C



Refer picture to @o.7<

urpose& In winter, remote engine start will help car to warm up however, in summer it will turn on air condition system.

=ow to shift to keycontrolled engine run afterwards the remote engine run is done.

After engine run "y remote unit, driver gets inside and inserts the ignition key. Turn it to /@ position and then step on

the "rake. -hen parking light flashes 4 times and 85D screen displays Ney icon, the engine run is "eing controlled "y key. Turning the ignition to / can shut down the engine.

2.7' -hen remote engine start and the door was closed system will enter arm and lock mode automatically.+ refer start R

programmed 4 times '.

urpose& )ecurity system is activated when remote engine start.

2.2' The parking light flashes slowly while the engine is running.+ refer start R programmed : '.

%' 6ngine will automatically shutdowns after its programmed runtime is over for eEample 9 minutes+refer start R

programmed 2 '.

$.7' -hile at arm mode and remote engine shutdown. The system will auto relock again or the car with the factoryinstalled

device of auto doorunlock upon ignition.+ refer start R programmed < '.

Remote en&ine start or shutdown for*manual &ear car+

7. The following procedures are for system enters stop and go feature

2. 8et engine run "y ignition key. Door must close. %rake pedal is depressed and press and release2 "utton, system

ignition relay will active.

$. The key turn ignition off while the engine is still running +6ngine goes on running at this stage "y system'.

4. Then open the car door. (et off and reclose the door

9. ress and release7 the system to make system enter arm1lock +6ngine will automatically shut off at this stage'.The

system0s start is opera"le afterwards. If there is any mistake in the procedures, the system0s engine start is disa"led.

:. ress and hold "utton2 for level shift ,then ress and release "utton2 to remote engine start +or' shutdown.

27



Refer picture to @o.7<

urpose& *anual gear car owner can safely remote engine start.

Fi>ed time auto-start

7. ress and hold2 enter deep command first. Then press and release7 again to select fiEed autostart time/@1/.

2. During the autostart time /@ mode, the engine will automatically start at time interval "eginning from mode initiation

+6Eample for time interval as 2404?04072 hours refer start R programma"le $ '. Refer picture to @o.7?

$. After fiEed autostart mode is on, if "rake pedal had stepped, this function would "e disa"le and I5/@ would "e

disappear. ser has to reset the function in order to turn on fiEed autostart mode again.

urpose& This can autostart to do "attery charging for car if it would "e left over a long period without driving

3>tra en&ine runnin& timer

7. R programmed the function needs turn on.

2. 8et engine run "y ignition key. Door must close. %rake pedal is depressed and press and release2 "utton, system

ignition relay will active.

$. Turn the ignition off while the engine is still running +6ngine goes on running at this stage "y system'.

4. Then open the car door. (et off and reclose the door

9. ress and release7 "utton the system to make system enter arm1lock +6ngine goes on running at this stage "y

system refer start R programma"le 7'.

urpose& -hile engine hispeed running and immediately turn off to protect the engine life.

22



Main system wire &uide

1. Red wire: 12v (+) positive input.

7' 8ocate the 72v wire of the ignition switch and connect it with this. This

supplies +M' 72F power with over 79 amps current , regardless of

position of "attery.2' The short red wire is connected door lock "lack 1red harness if triggered

"y +M'.

2. Black wire: ground (-) input.

5onnect this wire to the ground. The short "lack wire is connected door

lock "lack 1red harness if triggered "y +'.

3. Blue wire: channel output (-) to dome light or window roll up (Reer to

alarm R! "rogram # th

)This wire circuit can "e programmed for different mode options as "elow.

*ode 7and 2 for dome light/

-hile remote disarming, this wire provides 2C1$Csec of +' $CCmA to turn

the dome light through the eEternal relay.

*ode $ and 4 for roll up window/

-hile remote arming, this wire provides 2C1$C$Csec of +'to roll up power

window through the eEternal relay.

$. Black%&ellow wire: start or ignition killer output (-)

7. @15+ @ormally 5lose *ode'/(Reer to alarm R! "rogram 1'th )

If this mode is chosen, there is negative output at arm and immo"ili;ed

time. %ut there is no negative output when the system enters remote

engine start even system in arm mode.

2. @1/+ @ormally /pen *ode'/

If this mode is chosen, there is no negative output at arm and immo"ili;ed

time. %ut there is negative output when the system enters remote engine

start even system in arm mode.

@ote/

A' If system is preinstalled without remote start module, use this

wire to kill the car0s start motor or ignition.

%' If system is preinstalled with remote start module, use this

wire to kill the car0s ignition wire.

. range%violet wire input

edal "reak switch0s： @ormally rear "rake light trigger negative +' while

pedal "reak "ecome positive +M' connect to orange1violet . This wire needs

installation effective function "elow

)ystem use pedal "reak to do ignition upon on auto door lock.

)ystem use pedal "reak to do antihi>ack programmed safe mode

)ystem installation start module to do allowed or not allowed engine start.

#. Blue%Red wire: door switch trigger (+) (alarm R! "rogram 3rd )-hile the door open switch trigger +M' connect with the %lue1Red. If the

door closed the trigger not immediate disappear need programmed

*. range%hite wire: trunk pin switch (-) trigger input

-hile trunk open switch trigger that connect with the orange1white

wire.

,. reen%Black wire: direction light (+) output at *.

/utput 72F+M' "y internal relay for the direction light.

2$



/. reen%&ellow wire: direction light (+) output at *.

/utput 72F+M' "y internal relay for the direction light.

1'. &ellow wire: or ignition (+) input

5onnect to ignition switch area that shows M 72F when the ignition key is

turned to “ignition! and “start! position wire.

11. re0 wire: iren output (+) 1. (Reer to alarm R! "rogram ,th )

The main system feeds different +M' 72v of 7.9A for alert signal directly

connect with siren or use an additional relay to connect with the horn.

12. &ellow %Black wire: ctive channel 1output (-) o 3''ma (Reer to

alarm R! "rogram /th )

Remote To active channel B7 this wire pulse output. The pulse time would

"e programmed.

13. Blue%Black wire: door pin switch trigger (-) input

-hile the door open switch trigger +' connect with the %lue1%lack. If thedoor closed the trigger not immediate disappear need programmed

1$. range%ra0 wire: hood pin switch trigger (-) input

The hood open switch trigger 5onnect with orange1gray .

(larm function RF "ro&ram

7. 8et ignition at / position

2. ress multi function switch*9+times,

$. Immediately turn ignition /@. The siren sounds 9 chips G 86D

indicator flashes to indicate function R programma"le mode is

activated.

4. -hile in the active programming mode. 6ach press on multi function

switch is followed "y one siren chirp G one 86D flash and each fifth

press is followed "y a long chirp* 5hirping pattern ena"les the

programmer to know which features active mode he has achieved.

9. -hen the desired function changea"le level is reached, press the

related "utton for function selection. )iren chips 7O 4 times for

confirmation. Refer to "elow Alarm function R program ta"le.+as

shown in the Default change "y remote0s "utton column'. The factory

default is descri"ed in the F shaded "ackground.

:. After 7C sec or turning off ignition, system will automatically >ump

out R feature programming.

Restore RF alarm function to factory default

7. 8et ignition at /ff position

2. ress multi function switch times

$. Immediately turn ignition. /n The siren sounds chips G 86D

flashes to confirm system0s entry into stand"y R function to factory

default setting.

4. ress multi function switch 7 time The siren chips again .Then use

remote "utton*7+to get the system restore R features to the factory

default.

24



(larm Function RF Pro&ram a%le 3>"lanation

7st. Door lock1unlock output current time

7. 8ock C,?sec nlock C,?sec +for electric system'

2. 8ock $,:sec nlock $,:sec +for pneumatic system'

$. 8ock C,?sec nlock 2 pulse of C,?sec +for 2 stage unlock cars'

4. 8ock $Csec nlock C,?sec +PcomfortP output for *ercedes cars'

2nd Door lock1unlock upon ignition /@1/

7. All doors must "e closed and turn ignition /@. If

"rake pedal is depressed, system will auto doorlock. It will

immediately unlock when the ignition is turned /.

2. 5ar door is locked upon ignition /@. It will

immediately unlock when the ignition is /.

$. 5ar door is not locked upon ignition /@. It will

Alarm function R program ta"le Default change "y remote0s "utton

*.. switch eatures active mode with factory default *7 + *2 + *$ + *4 +

7st Door unlock1lock output current 3 C.?1C.? 4$.:1$: 4C.? twice 1C.? 4note

2nd Door lock1unlock upon ignition on1off 3 "rake pedal 4 /@ 4Auto 8ock off

unlock on

4 /ff

$rd Delay door switch time 4)mart "ypass for

Dome light

3 for in switch 4 in switch

delay $C sec

4in switch 49

delay sec4th Auto arm or lock upon last door close 4 -ithout lock 3-ith lock 4-ith lock 4-ith lock

9th *anual disarm with or w1o pin code 3 -ithout pin 4-ith pin code 4-ith pin code 4-ith pin code

:th %lue wire output active 3 5isarm 2C 4 Disarm $C 4 Arm 2C 4 Arm $C

<th Auto rearm on1off 3 /n 4/ff 4/ff 4/ff

?th )mart siren or =orn selection 4)iren 3 )mart siren 4 for =orn 4 for =orn

th 3ellow1white 5= B 7 output pulse time 3 C. ?sec 47C sec 4$C sec 4/n1off

7Cth )tart or ignition killer @15 @1/ 3 @15 4 @1/ 4 @1/ 4 @1/

77th Remote and )witchcontrolled Anticar>ack 3 )afe mode 4 auto mode 4 /ff 4 /ff

29



immediately unlock when the ignition is /.

4. 5ar door is not lock 1 unlock upon ignition /@1 /.

$rd Delay door switch time

7. Detect car0s dome light wire )mart %ypass/-hich system into arm

the door ;oom detect effective will after the trigger disappear. If the

triggered connection after :C sec. the siren will chips 4 times and 85Dshow door open.

2. Detects door pin switch instantly/-hen system enters arm ,system

detects door ;one immediately .In other word after arm if door is

opened, the system will auto "y pass. )iren chips and 85D displays

door open.

$. Detects door pin switch after $C sec / -hen system enters arm

,system detects door ;one after $C second . In other word after arm if

door is opened, the system will auto "y pass. )iren chips and 85D

displays door open

4. Detects door pin switch after 49 sec / -hen system enters arm

,system detects door ;one after 49 second . %ut after 49 sec, if the

triggered ;one still eEists, the siren will "lurt.

4th 8ast door close with arm and lock

7. 8ast door close with only arm "ut without lock.

2. 8ast door close with arm and door lock.

9th *anual disarm using with or without pin code

7. /ff * sing manual to disarm system.

2. sing manual disarm using pin code +Refer to pin code eEplanation'

:th %lue wire output active

7. or dome light/-hile remote disarming, this wire provides 2Csec of

+' $CCmA current to turn the dome light /@ through the eEternal

relay.

2. or dome light/-hile remote disarming, this wire provides $Csec of

+' $CCmA current to turn the dome light /@ through the eEternal

relay.

$. or window rollup/-hile remote arming, this wire provides 2Csec

of +' $CCmA current to roll up the electric window through the

eEternal relay

4. or window rollup/-hile remote arming, this wire provides $Csec

of +' $CCmA current to roll up the electric window through the

eEternal relay .Auto rearm with off.

<th Auto rearmed /@1/

7. Auto rearmed /@.

2. Auto rearmed /.

?th )iren or =orn chirp time selection/

7. )iren mode/The system enter audio arm mode the siren chip and

disarm the siren will chip 2 times, and in silent arm mode. If triggered,

the siren will not "lurt.

2. “)mart )iren “ mode/5hoose this mode to allow system in audio

arm mode. The siren chips upon disarming will not chips. %ut into

disarm if siren wills 4 chips this mean is during arm mode which ;oon

trigger report.

$. 5hoice this mode to allow system in active arm mode as in note 7.

6Etra relay is re#uired and its triggering is "y horn.

4. 5hoice this mode to allow system in active arm mode as in note 7.

6Etra relay is re#uired and its triggering is "y horn.

th 5hoice @o. 72 3ellow1white wire output pulse time

7. 6ach output time at C.? sec. for trunk release when activated channel B

7.

2:



2. 6ach output time at 7C sec. for user need activated channel B 7.

$. 6ach output time at $C sec. for user need activated channel B 7.

4. 6ach output time /@1/. or user need activated channel B 7.

7Cth 5hoice @o. 4 "lack1yellow wire0s while start or ignition killer active/

$. @15+ @ormally 5lose *ode'/

If this mode is chosen, there is negative output at arm and

immo"ili;ed time. %ut there is no negative output when the system

enters remote engine start even system in arm mode.

4. @1/+ @ormally /pen *ode'/

If this mode is chosen, there is no negative output at arm and

immo"ili;ed time. %ut there is negative output when the system enters

remote engine start even system in arm mode.

77th Remote and )witchcontrolled Anticar>ack function

7. )afe mode. If this mode is chosen, anti

car>ack full trigger is initiated when "rake pedal is depressed while inanticar>ack stand"y mode.

2. Auto mode. If this mode is chosen, anti

car>ack full trigger is automatically initiated without the need to

depress "rake pedal while in anticar>ack stand"y mode.

$. / mode. If this mode is chosen, remote

and switchcontrolled anticar>ack function are disa"led.

Door lock wire dia&rams

2<



(larm module wirin& dia&ram

2?



2



'tart function RF "ro&ram

7. 8et ignition at / position

2. ress multi function switch *:+ times

$. Immediately turn ignition /@. The siren sounds : chips G 86D

indicator flashes to indicate function R programma"le mode is

activated.

4. -hile in the active programming mode. 6ach press on multi function

switch is followed "y one siren chirp G one 86D flash and each fifth

press is followed "y a long chirp* 5hirping pattern ena"les the

programmer to know which features active mode he has achieved.

9. -hen the desired function changea"le level is reached, press the

related "utton for function selection. )iren chips 7O 4 times for

confirmation. Refer to "elow R feature program ta"le.+as shown in

the Default change "y remote0s "utton column'. The factory default is

descri"ed in the shaded "ackground.

:. After 7C sec or turning off ignition, system will automatically >ump

out R feature programming.

Restore RF start function to factory default

7. 8et ignition at /ff position

2. ress multi function switch *7C+ times

$. Immediately turn ignition. /n The siren sounds 7C chips G 86D

flashes to confirm system0s entry into stand"y R function to factory

default setting.

4. ress multi function switch 7 time The siren chips again .Then use

remote "utton * +to get the system restore R features to the

factory

?elow functions need en&ine start module

't

)tart function R program ta"le Default change "y remote0s "utton*.. switch eatures active mode with factory default *7 + *2 + *$ + *4 +7st 6Etra engine running time 3 /ff 4 7 min 4 $ min 4 : min

2nd 6ach time remote running time 3 9 4 7C 4 79 4 2C

$rd iEed interval auto start 3 26 hours 4 4? hours 4 4 hours 4 72 hours

4th Remote start with or without lock1arm 3 /n 4 /ff

9th Remote start park light active. 3 /n flash 4 /n steady 4 /ff

:th

In arm mode after remote engine shot off thedoor will auto lock once.

3 /ff 4 /n

$C



art Function RF Pro&ram a%le 3>"lanation

7st. 6Etra engine running time

7. 5hoose this mode if the eEtra engine running

timer is not needed.

2. rom the time ignition is turned “/! "y

key, engine will keep on running for 7 min. and turn itself off

automatically.

$. rom the time ignition is turned “/! "y

key, engine will keep on running for $ min and turn itself off

automatically.

4. rom the time ignition is turned “/! "y

key, engine will keep on running for : min and turn itself off

automatically.

2nd

6ach time remote start running time7. At this mode., remote engine starts with the

engine run for! 9 ! min then auto shutoff.

2. At this mode., remote engine starts with

engine run for “ 7C ! min then auto shutoff.

$. At this mode., remote engine starts with

engine run for “79 “min then auto shutoff.

4. At this mode., remote engine starts with

engine run for “ 2C! min then auto s shutoff.

$rd iEed interval auto start

7. At this mode., the system autostarts with “24! hours interval .

2. At this mode, the system autostarts with “4?! hours interval .

$. At this mode, the system autostarts with “4! hours interval .

4. At this mode., the system autostarts with “72! hours interval .

4th Remote start with or without lock1arm

7. At this mode if remote engine started with door "eing closed , the

system will automatically enter arm1lock and start engine.

2. At this mode if remote engine started, the system will not

automatically enter arm1lock and start engine.

9th Remote start park light active

7. If remote engine start the alarm system park light will auto flash.

2. If remote engine start the alarm system park light will auto steady on.

$. If remote engine start the alarm system park light will not active.

:th In arm mode after remote engine shot off the door will auto lock once .

7. /.

2. /@. or car with the factoryinstalled device

of auto doorunlock upon ignition. use this option.

3n&ine 'tart Module wire &uide

# " wire

7. ?lue wire H A55 output +M'. The wire "ecomes active after 7C sec from remote engine run .

$7



2. :ellow wire H I(@7 output +M'.The wire is active during

remote start and engine run

$. @reen wire H I(@2 output +M' The wire is active depending

on slider switch @o.$ option

4. 'mall ?lack/yellow wire H 5ut off the car0s start wire and

connect wire section of key side input +M' with this

9. ?i& ?lack/yellow wire H 5ut off the car0s start wire and

connect wire section of motor side output +M' with this

:. Red wire H ositive power input $Ca +M'

ote : The thin %lack1yellow G thick %lack1yellow wires work for anti

grind features

7' During remote stat G engine run, these

will protect start in case that ignition key is used to start again

2' At arm mode, these will disa"le start

motor if ignition key is used to start engine

, " wire

7. ?lack wire& 5onnect this to (round input +'

2. @ray/%lack wire H This wire will detect the R* or /il signal input

depending on the slide switch0s position .

)witch @o.2 select / position and system gray1"lack wire needs

connected to car0s tachometer the system will depend R*

signal to confirmed engine start successful or not.

)witch @o.2 select /@ position and system gray1"lack wire is not

connected +open' the system will depend voltage to confirmed

engine start successful or not. If the wire connected to generator

the system will depend generator signal to confirmed engine

start successful or not.

4* ?lack/red wire & This works to disarm factory security output +'. If the

car is preinstalled with security device “like trans"onder;, this circuit

is used to "ypass it with the need of other eEternal device.

R"4 signal 567

Followin& "rocedure %elowA L3D flashes "ro#es @ray/%lack wire

finds correct ach wire

7' irstly, slide switch B2 to R* option

2' Then slide switch B : to /@

$' Touch gray1"lack wire tip to any possi"le Tach wire0s metal

part

4' 8ed flashes when gray1"lack has connection with Tach.

5onnect them.

Pre-test for correct wirin& that will assure "ractical remote en&ine start

+a' irstly connect main wire harness and engine start detect wire with

6*) . ress “ start engine running test switch! and see if the engine is

started. The engine start confirms the wiring is correct.

+"' ress again “start engine running test switch! to shutdown engine.

+c' (o on connecting wire "etween 6)* and car alarm module.

+d' if step +a' test fails, recheck if all wires are properly connected.

tart engine running test switch

$2



7' sing this switch to test whether the remote start module is installed

successful or not.

2' If the installation is well done, "y pressing this switch one time the

remote start module will activate and the engine will run. The second

press on this switch the engine will stop. After this procedure, >ust

connect the data wire of remote start module with main unit of car

alarm.

$' lease check the installed wire if the engine can0t run successfully "y

pressing the switch. lease pay more attention that only the remote

start module can do engine running that you can connect remote

startmodule with main unit of car alarm.

8onnect alarm s0stem data input%output

If the Remote )tart *odule are installed, this connector does inter

communication works "etween main system.

lider switch select unction

7. Foltage mode crank time. / H C.?

sec. /@ H 7.? sec.

2. 6ngine start sense. / H Tach for

R*. /@ H (enerate or voltage

$. Ignition 2 relay program. /H 5rank

output /@H 5rank no output

4. Transmission mode /H automatic

transmission /@Hmanual

9. (as1Diesel mode /H(as /@HDiesel

:. R* signal 86D /@Hturn on the R*

86D for Tach location1testing.

$$

Documents

722manual Eenglish NEW