Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
1. FEATURES2. OPERATING YOUR PAGER 3. PAGER SYMBOLS4. INITIAL DISPLAY AND SYMBOLS5. TURNING YOUR PAGER ON/OFF6. USING THE FUNCTION MENU 7. RECEIVING AND READING YOUR MESSAGES 8. READING MESSAGES 9. PROTECTING AND UN-PROTECTING YOUR
MESSAGES10. ERASING MESSAGES11. SELECTING THE WEEK/DATE12. SETTING THE ALERT MODE 13. SETTING THE TONE14. SETTING THE MELODY15. SETTING THE ALARM 16. AUTOMATIC ON/OFF17. SETTING THE TIME/DATE 18. SETTING THE REMIND ON/OFF 19. OTHER FEATURES 20. SELF-DIAGNOSTIC FUNCTION 21. BATTERY INFORMATION
CONTENTS
24455668
91011111213141618 20 2123 24
¡¡⁄⁄Total 18 Messages with 20 Digits ¡¡⁄⁄Message Time Stamping
Let you know the exact date and time when the messages were received.
¡¡⁄⁄Duplicate Message DetectionDuplicate Messages are stored in the same memory slot as original message.
¡¡⁄⁄Unread Message IndicationUnread Messages are stored in the memory.
¡¡⁄⁄Message Lock ( Max. 12 Lock Messages )Lock important messages.
¡¡⁄⁄Shows Time and Date( Automatic Adjustment of Time and Date )Pager provides you more convenience since it alsoacts as a watch and calendar.
¡¡⁄⁄Erase All Messages/Erase Selected Messages¡¡⁄⁄Automatic Power ON / OFF
Turns your pager on and off automatically at your desired time, for saving battery life
2
1. FEATURES
¡¡⁄⁄User Selectable Funny Alerts 8 Kinds of Tones / 8 Kinds of Melodies / Vibration / Silent
¡¡⁄⁄User Selectable Calendar Type (Date / Week)Allow you to choose calendar type (Date / Week) by using one key.
¡¡⁄⁄Alarm Clock ( Tone / Vibration )You can set your pager to wake you up in the morning or to remind you of an important appointment.
¡¡⁄⁄Reminder AlertA short friendly alert reminds you when you have not reviewed your messages.
¡¡⁄⁄Service Range Icon DisplayRemind you when you are in the receiving area.
¡¡⁄⁄Messages BackupRetain messages in memory while replacing the battery.
¡¡⁄⁄Low Battery Indicator and AlertNotify you that your battery is getting low and is needed to be replaced.
¡¡⁄⁄Backlight DisplayAllow you to easily read your messages at night or in a low light environment.
¡¡⁄⁄Diagnostic Progam Built-inIt is to diagnose the pager by itself and find out aproblem so that you can prevent from malfunction and it makes maintenance easy.
3
1. FEATURES
4
2. OPERATING YOUR PAGER
Your pager receives messages only when it isturned on.
3. PAGER SYMBOLS
: Message Indicator (Blinking)
: Vibration mode & Audible Alert Mode
: Pager Alarm activated
: Automatic Turn ON / OFF activated
: Protected message
: Duplicate Message
: Low-battery Indication
: Service Area Indicator
: Message continuation
(when message over 12 digits is received)
1) To turn your pager offAt the Initial Function Mode (Pictures) press andrelease [M]button until “PAGER OFF?” is displayed.Press [S]button .
In this status, you cannot receive a messagebut the functions of Calendar, Alarm,AUTO ON / OFF willnormally operate.
2) To turn your pager onYou can change to Standby Mode by pressing
[S]button for 2 seconds at the status of“OFF 7:00 A”(Picture 3)
5
4. INITIAL DISPLAY AND SYMBOLS
5. TURNING YOUR PAGER ON/OFF
[1. Whole Display]
[2. Standby Mode Screen]
[3. Off Mode Screen]
[4. Standby Mode Screen]
7. RECEIVING AND READING YOUR MESSAGES
In Standby Mode Screen, Press [M]button for 2 secondsto display the function menu.The function menu gives you to access to the manyfeatures of your pager through series of symbols.
6
6. USING THE FUNCTION MENU
When a message is received, the pager alerts anddisplays received message.
1) Press any button to stop the alert.2) Press [S]button to display your message.
Your pager automatically stores the message and the time it is received. ¡ In case of receiving the same message, icon is
displayed. (Picture 6)¡ In case of receiving a message over 12 digits, icon
is displayed. (Picture 6)
[5. Initial Function Mode]
[6. Duplication / Continuation Icon Display]
¡ In case of receiving the messages over 18 numbers,the ‘ PAGE FULL’ is displayed and receivedmessage is erased and new message is stored. (Picture 7)
¡ After finishing to receive message, in case of notreading the received message, the number of unread message will blink at the left side. (Picture 8)
7
[7. Page Full Display]
[8. Unread Message Display]
1) In order to read stored message : Press [S]button at the Standby Mode, then the received messages are displayed in sequence.
After displaying a message, the sequence, week,time are displayed. (Picture 10)
2) Return to Standby Mode:If pressing [M]button at the same time during displaying the received message, you can return to Stanby Mode.(Picture 4)
8
8. READING MESSAGES
[9. Message Display]
[10. Time-Stamping Display]
1) If you press [M]button for 1 second while displaying amessage, ‘ PROTECT ?’ is displayed. If you press[S]button , icon is displayed and the read message is protected. (Picture 11)
2) If pressing [M]button 1 second while displaying amessage, ‘ UNPROTECT ?’ is displayed. If you press [S]button , icon is disappeared and the message is unprotected. (Picture 12)
¡ NOTE ¡You can protect up to max. 12 messages.
9
9. PROTECTING AND UN- PROTECTING YOURMESSAGES
[11. Protect Display]
[12. Unprotect Display]
1) Erasing Individual MessageIf you press [M]button twice while a message is displayed, ‘ERASE ?’ is displayed. If you press[S]button , the message is erased. (Picture 13)
2) Erasing All MessagesIf you press [M]button at the initial Function Mode(‘SET ALERT ?’), ‘ERASE ALL ?’ is displayed.(Picture 14). If pressing [S]button , all stored messages are erased and ‘ALL ERASED ‘is displayed.
¡ NOTE ¡You can erase the protected message after
unprotecting the message.
10
10. ERASING MESSAGES
[13. Erase Display]
[14. Erase all Display]
If you press [M]button at the Standby Mode, the date isdisplayed when the week is displayed (Picture 15)and the week is displayed when the date is displayed(Picture 16).
11
11. SELECTING THE WEEK / DATE
12. SETTING THE ALERT MODE
You can set your pager to alert with one of vibration, tone,or melody.
1) If you press [M]button for about 2 seconds at theStandby Mode, ‘ SET ALERT ? ‘is displayed and youcan move to Function Mode.
2) If you press [S]button once, the pre-set ALERTMODE is displayed.
3) Choose the ALERT MODE you want by pressing[M]button .(‘TONE ?’ , ‘MELODY ?’ , ‘VIBRATE ?’ )
4) Press [S]button at the ALERT MODE you want.
[15. Week Display Mode]
[16. Date Display Mode]
13. SETTING THE TONE
You can set your pager to alert with one of eight audible tones.
1) At the Picture17, press [M]button and then, press [M]button until ‘TONE?’ is displayed.
2) Press [S]button .3) The pre-set tone sound is heard.4) Select the TONE by pressing [S]button .
(Picture 19)
12
[17. Set Alert Mode]
[18. Set Tone Mode]
[19. Edit Tone Mode]
You can set your pager to alert with one of eight audiblemelodies.
1) By pressing [M]button , choose ‘MELODY?’ at the Picture 17. (Picture 20)
2) Press [S]button .3) The pre-set MELODY is heard.4) Select the MELODY by pressing [S]button .
(Picture21)
You can set your pager not to alert with silent function.This function is for the situation that you don’t want to bebothered with alert tone, melodies and vibration.1) By pressing [M]button , choose “Silent” at the Picture 22.2) Press [S]button . Now your pager is set as silent mode
no alert will be heard.
13
14. SETTING THE MELODY
15. SETTING THE SILENT
[20. Set Melody Mode]
[21. Edit Melody Mode]
[22. Edit Melody Mode]
You can set your pager’s alarm to alert at a certain timeof day.
To enable the alarm : 1) At standby mode, Press and release [M]button for
2 seconds and press [M]button until ‘SET ALARM ?’ is displayed. (Picture 24)
14
16. SETTING THE VIBRATION
[24. Set Alarm Mode]
[23. Set Vibration Mode]
You can set your pager to alert with vibration.1) By pressing [M]button , choose ‘Vibrate’ at the
Picture 23. 2) Press [S]button .
Now, your pager is set as vibration.
17. SETTING THE ALARM
2) Press [S]button .3) The pre-set ALARM MODE (ON / VIB / OFF) is
displayed. (Picture 25, 26, 27)4) You can change ALARM MODE by pressing
[S]button . ( ON -> VIB -> OFF )(ICON is lighted at the ON or VIB Mode)
5) Press [M]Button . 6) The current Alarm Time is displayed and the time
area blinks. (Picture 25, 26)7) And you can edit the Alarm Time.
¡ NOTE ¡[M]button is for moving the location.[S] button is for changing the value.
15
[26. Alarm Vibrate Mode]
[27. Alarm Off Mode]
[25. Alarm On Mode]
You can set your pager to turn on or off at a selected time of day.
To enable automatic ON / OFF :1) At standby mode, Press and release [M]button for
2 seconds and press [M]button until ‘SET AUTO ?’ is displayed. (Picture 28)
2) Press [S]button .3) The Auto ON / OFF which is already set is
displayed. (Picture 29)4) By pressing [M]button , select the mode you want.5) Press [S]button at ‘[ON] OFF’. (Picture 29)
6) The Auto On time which is already set is displayed and then, it blinks. (Picture 30)
16
18. AUTOMATIC ON / OFF
[28. Set Auto Mode]
[29. Auto ON / OFF Mode]
[30. Edit Auto On Mode]
7) You can edit Auto On Time.8) After setting the Auto on time, the Auto off
Time is displayed and then it blinks. 9) You can edit Auto Off Time.
Setting the time / date : 1) At Standby Mode, Press and release [M]button for
2 seconds and press [M]button until ’SET TIME ?’ is displayed. (Picture 32)
2) Press [S]button .3) The pre-set Date (YYYY-MM-DD) is displayed and
the Year blinks. (Picture 33)
17
[31. Edit Auto Off Mode]
19. SETTING THE TIME/DATE
[32. Set Time Mode]
[33. Edit Date Mode]
4) After editing the Date, the selected Hour / Minute isdisplayed and the Hour blinks. (Picture 34)
5) You can edit the Time.
18
[34. Edit Time Mode]
You can set your pager to REMIND ON / OFFabout unread messages. ( periodic alert )
To enable REMIND ON / OFF :1) Press and release [M]button , at standby mode And
press [M]button until ‘REMIND ?’ is displayed.(Picture 35)
2) Press [S]button .3) The Remind ON / OFF which is set is displayed.
(Picture 36)
4) Select ON / OFF mode you want by pressing[M]button .
5) Press [S]button .
18. SETTING THE REMIND ON / OFF
[35. Set Remind Mode]
[36. Remind On / Off Mode]
19
1) Display of Unread MessageIn case of unread message, the number(‘01’) of the message is displayed at the left upper side.(Picture 37)
2) Backlight FunctionIf you press [S]button for 2 seconds at the status of standby mode, the ON / OFF is toggled. 8 seconds later, LAMP is automatically went out .
3) Alarm for Battery ChangingIf the battery is exhausted, the alarm sound is heardonce with displaying icon and after that, only theicon blinks. (Picture 38)
20
19. OTHER FEATURES
[37. Unread Message Display]
[38. Alarm for Battery Changing]
4) Service Area DisplayIcon is displayed when you are in the service
area. (Picture 39)
¡ NOTE ¡In case of unread message, the number of unread
message blinks and the alert tone is heard every 4 minutes when the Remind Mode is ON.
(Picture 37)
[39. Service Area Display]
21
22
1) Diagnosis by userWhen you put a battery into a pager, you can check the status of your pager as per the following procedures.(1) All LCD is ON (2) LAMP is lighted (3) TONE is heard (4) VIBRATOR is operated.Through the above 4 steps, you can check if LCD / LAMP / BUZZER / VIBRATOR are normal.
2) Self-Diagnosis of PagerThrough the same procedures as No.1), you can testif your pager operates well and find out problems and reasons. The messages like Picture 40, 41 are not displayed when the pager operates normally.
What is Self-Diagnosis ?It is to diagnose the status of the main parts in the pager by itself and to find out if there is a problem or not so that you can prevent from malfunction and it makes maintenance easy.
20. SELF-DIAGNOSTIC FUNCTION
[40. Status of Low Battery]
[41. Defected Eeprom Display]
Your pager is designed to operate with a single AAA-sizealkaline battery. See the diagram for the battery door location.To install or replace the battery, place the pager face down and proceed as follows;
1) Lower the locking device and open the battery door in the arrow direction(¢”).
2) If you put a battery into the pager, alarm sound isheard and your pager is ready to receive a message.
3) Close the battery door and lock the locking device.
21. BATTERY INFORMATION
LOCK
Locking Device
Battery door
23