79624

S7-200 Specifications

A-16S7-200 Programmable Controller System Manual

C79000-G7076-C233-01

A.4 Specifications for the CPU 224

Table A-4 Specifications for CPU 224 DC/DC/DC and CPU 224 AC/DC/Relay

DescriptionOrder Number

CPU 224 DC/DC/DC6ES7 2141AD200XB0

CPU 224 AC/DC/Relay6ES7 2141BD200XB0

Physical SizeDimensions (W x H x D)WeightPower loss (dissipation)

120.5 mm x 80 mm x 62 mm360 g8 W

120.5 mm x 80 mm x 62 mm410 g9 W

CPU FeaturesOn-Board digital inputsOn-Board digital outputsHigh speed counters (32 bit value)

TotalSingle phase countersTwo phase counters

Pulse outputsAnalog adjustmentsTimed interruptsEdge interruptsSelectable input filter timesPulse CatchTime of Day Clock (clock accuracy)

14 inputs10 outputs

6 High-speed counters6, each at 20 kHz clock rate4, each at 20 kHz clock rate2 at 20 kHz pulse rate2 with 8 bit resolution2 with 1 ms resolution4 edge up and/or 4 edge down7 ranges from 0.2 ms to 12.8 ms14 pulse catch inputs2 minutes per month at 25 C7 minutes per month 0 C to 55 C

14 inputs10 outputs

6 High-speed counters6, each at 20 kHz clock rate4, each at 20 kHz clock rate2 at 20 kHz pulse rate2 with 8 bit resolution2 with 1 ms resolution4 edge up and/or 4 edge down7 ranges from 0.2 ms to 12.8 ms14 pulse catch inputs2 minutes per month at 25 C7 minutes per month at 0 C to 55 C

Program size (stored permanently)Data block size (stored permanently):

Stored permanentlyBacked by super capacitor or battery

Number of expansion I/O modulesMaximum digital I/OMaximum analog I/O

4096 words2560 words


7 modules256 points16 inputs and 16 outputs



7 modules256 points16 inputs and 16 outputs

Internal memory bitsStored permanently on power downBacked by super capacitor or battery

256 bits112 bits256 bits

256 bits112 bits256 bits

Timers totalBacked by super capacitor or battery1 ms10 ms100 ms

256 timers64 timers4 timers16 timers236 timers

256 timers64 timers4 timers16 timers236 timers

Counters totalBacked by super capacitor or battery

Boolean execution speedMove Word execution speedTimer/Counter execution speedSingle precision math execution speedReal math execution speedSuper capacitor data retention time

256 counters256 counters

0.37 s per instruction34 s per instruction50 s to 64 s per instruction46 s per instruction100 s to 400 s per instruction190 hours, typical, 120 hours minimum at 40 C

256 counters256 counters

0.37 s per instruction34 s per instruction50 s to 64 per s instruction46 s per instruction100 s to 400 s per instruction190 hours, typical, 120 hours minimum at 40 C


A-17S7-200 Programmable Controller System ManualC79000-G7076-C233-01

Table A-4 Specifications for CPU 224 DC/DC/DC and CPU 224 AC/DC/Relay (continued)Description

Order NumberCPU 224 AC/DC/Relay

6ES7 2141BD200XB0CPU 224 DC/DC/DC

6ES7 2141AD200XB0On-board CommunicationNumber of portsElectrical interfaceIsolation (external signal to logic circuit)PPI/MPI baud ratesFreeport baud rates

Maximum cable length per segmentup to 38.4 kbaud187.5 kbaud

Maximum number of stationsPer segmentPer Network

Maximum number of mastersPPI master mode (NETR/NETW)MPI connections

1 portRS-485Not isolated9.6, 19.2, and 187.5 kbaud0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, and38.4 kbaud

1200 m1000 m

32 stations126 stations32 mastersYes4 total, 2 reserved: 1 for PG and 1 OP

1 portRS-485Not isolated9.6, 19.2, and 187.5 kbaud0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, and38.4 kbaud

1200 m1000 m

32 stations126 stations32 mastersYes4 total, 2 reserved: 1 for PG and 1 OP

Cartridge OptionsMemory cartridge (permanent storage)Battery cartridge (data retention time)

Program, Data, and Configuration200 days, typical

Program, Data, and Configuration200 days, typical

Power SupplyLine voltagepermissible range

Input current CPU only/max load

In rush current (maximum)Isolation (input power to logic)Hold up time (from loss of input power)Internal fuse, not user-replaceable

20.4 to 28.8 VDC

120/900 mA at 24 VDC

10 A at 28.8 VDCNot isolated10 ms at 24 VDC2 A, 250 V, Slow Blow

85 to 264 VAC47 to 63 Hz35/100 mA at 240 VAC35/220 mA at 120 VAC20 A at 264 VAC1500 VAC80 ms at 240 VAC, 20 ms at 120 VAC2 A, 250 V, Slow Blow

+5 Power for Expansion I/O (max) 660 mA 660 mA24 VDC Sensor Power OutputVoltage rangeMaximum currentRipple noiseCurrent limitIsolation (sensor power to logic circuit)

15.4 to 28.8 VDC280 mASame as input line600 mANot isolated

20.4 to 28.8 VDC280 mALess than 1 V peak-to-peak (maximum)600 mANot isolated



C79000-G7076-C233-01




6ES7 2141AD200XB0Input FeaturesNumber of integrated inputsInput type

14 inputsSink/Source (IEC Type 1)

14 inputsSink/Source (IEC Type 1)

Input VoltageMaximum continuous permissibleSurgeRated valueLogic 1 signal (minimum)Logic 0 signal (maximum)

30 VDC35 VDC for 0.5 s24 VDC at 4 mA, nominal15 VDC at 2.5 mA, minimum5 VDC at 1 mA, maximum

30 VDC35 VDC for 0.5 s24 VDC at 4 mA, nominal15 VDC at 2.5 mA, minimum5 VDC at 1 mA, maximum

Isolation (Field Side to Logic Circuit)Optical isolation (galvanic)Isolation groups of

500 VAC for 1 minute8 points and 6 points

500 VAC for 1 minute8 points and 6 points

Input Delay TimesFiltered inputs and interrupt inputs 0.2 to 12.8 ms, user-selectable 0.2 to 12.8 ms, user-selectableHSC clock input rateSingle Phase

Logic 1 level = 15 to 30 VDCLogic 1 level = 15 to 26 VDC

QuadratureLogic 1 level = 15 to 30 VDCLogic 1 level = 15 to 26 VDC

20 kHz30 kHz

10 kHz20 kHz

20 kHz30 kHz

10 kHz20 kHz

Connection of 2 Wire Proximity Sensor(Bero)Permissible leakage current 1 mA, maximum 1 mA, maximumCable LengthUnshielded (not HSC)ShieldedHSC inputs, shielded

300 m500 m50 m

300 m50 m50 m

Number of Inputs ON Simultaneously40 C55 C

1414

1414

Output FeaturesNumber of integrated outputsOutput type

10 outputsSolid stateMOSFET

10 outputsRelay, dry contact

Output VoltagePermissible rangeRated valueLogic 1 signal at maximum currentLogic 0 signal with 10 K load

20.4 to 28.8 VDC24 VDC20 VDC, minimum0.1 VDC, maximum

5 to 30 VDC or 5 to 250 VAC

Output CurrentLogic 1 signalNumber of output groupsNumber of outputs ON (maximum)Per group horizontal mounting (maximum)Per group vertical mounting (maximum)Maximum current per common/groupLamp loadON state resistance (contact resistance)Leakage current per pointSurge currentOverload protection

0.75 A210553.75 A5 W0.3 10 A, maximum8 A for 100 ms, maximumNo

2.00 A3104/3/34/3/38 A30 W DC/200 W AC0.002 , maximum when new

7 A with contacts closedNo


A-19S7-200 Programmable Controller System ManualC79000-G7076-C233-01




6ES7 2141AD200XB0Isolation (Field Side to Logic)Optical isolation (galvanic)Isolation resistanceIsolation coil to contactIsolation between open contactsIn groups of

500 VAC for 1 minute

5 points

100 M , minimum when new1500 VAC for 1 minute750 VAC for 1 minute4 points/3 points/3 points

Inductive Load ClampingRepetitive Energy dissipation

< 0.5 LI2 x switching rateClamp voltage limits

1 W, all channels

L+ minus 48V

Output DelayOff to On (Q0.0 and Q0.1)On to Off (Q0.0 and Q0.1)Off to On (Q0.2 through Q1.1)On to Off (Q0.2 through Q1.1)

2 s, maximum10 s, maximum15 s, maximum100 s, maximum

Switching Frequency (Pulse TrainOutputs)Q0.0 and I0.1 20 kHz, maximum 1 Hz, maximumRelaySwitching delayLifetime mechanical (no load)Lifetime contacts at rated load

10 ms, maximum10,000,000 open/close cycles100,000 open/close cycles

Cable LengthUnshieldedShielded

150 m500 m

150 m500 m



C79000-G7076-C233-01

+

1K

Note:1. Actual component values may vary.2. Either polarity accepted.3. Optional ground.

+ +

++

5.6K

24 VDCPower

1M 0.0 0.1 0.2 0.31L+ M L+DC

24 VDC

36V

24 VDC Power,Ground and OutputTerminals

24 VDC Commonand 24 VDC InputTerminals

0.4 2M 2L+ 0.5 0.6 0.7 1.0 1.1

1M 0.0 0.1 0.2 0.3 M L+0.4 0.5 0.6 2M 1.0 1.1 1.2 1.30.7 1.4 1.5

Sensor PowerOutput

Figure A-6 Connector Terminal Identification for CPU 224 DC/DC/DC

N ()L (+)

N ()L (+)

N ()L (+)

1K

++

5.6K

120/240 VAC

1L 0.0 0.1 0.2 0.3 N L1AC

24VDC

Commons andRelay OutputTerminals

24VDC Commonand 24VDC InputTerminals

2L 0.5 0.6 3L 0.7 1.0

1M 0.0 0.1 0.2 0.3 M L+0.4 0.5 0.6 2M 1.0 1.1 1.2 1.30.7 1.4 1.5

0.4 1.1

Note: 1. Actual component values

may vary.2. Connect AC line to the

L terminal.3. Either polarity accepted.4. Optional ground.

Sensor PowerOutput

Figure A-7 Connector Terminal Identification for CPU 224 AC/DC/Relay

Documents

79624