Upload
rochelle-byers
View
223
Download
0
Embed Size (px)
Citation preview
8/11/2019 8 - Design Development Tools
1/15
DESIGN DEVELOPMENT TOOLS
PRODUCT
GROUP
8
LICAD
EASYSTEEL
8/11/2019 8 - Design Development Tools
2/15
8/11/2019 8 - Design Development Tools
3/15
01
2
3
4
5
6
7
9
01
2
3
4
5
6
7
9
PRODUCT
GROUP
8.0
LISEGA DESIGN DEVELOPMENT TOOLS
CONTENTS PAGE
8
8
LISEGA engineering software tools __________________________________8.1
LICAD design program ____________________________________________8.2
EASYSTEEL design program ________________________________________8.5
Component libraries ______________________________________________8.11
Interfaces to CAD programs________________________________________8.11
NAVISWORKS design viewer ______________________________________8.12
http://pg0.pdf/http://pg1.pdf/http://pg2.pdf/http://pg3.pdf/http://pg4.pdf/http://pg5.pdf/http://pg6.pdf/http://pg7.pdf/http://pg9.pdf/http://pg0.pdf/http://pg1.pdf/http://pg2.pdf/http://pg3.pdf/http://pg4.pdf/http://pg5.pdf/http://pg6.pdf/http://pg7.pdf/http://pg9.pdf/http://pg9.pdf/http://pg7.pdf/http://pg6.pdf/http://pg5.pdf/http://pg4.pdf/http://pg3.pdf/http://pg2.pdf/http://pg1.pdf/http://pg0.pdf/8/11/2019 8 - Design Development Tools
4/158.1
The intelligent solution for support planningLISEGAs unique modular system was theprerequisite for the creation of highly sophis-
ticated user software. The solutions on handopen up new opportunities for increasedengineering design efficiency, improved qualityand significant savings in project manhours.
The general introduction of 2D and 3D CADmodelling has already had a dramatic effecton the design process for pipework systems.However, the benefits for pipe support designhave been limited because supports were notincluded in the 3D CAD programs.
The LICAD program has set new standards inthis field. It allows the generation of pipe sup-port drawings, bills of materials and 3-Dmodels in minutes rather than hours. LICAD isan intelligent front-end program that providesall the required interface data for all commonCAD software programs from a single source.From the point of view of quality this singlesource function cannot be overemphasised.To exploit further fields of application for
LISEGA DESIGN DEVELOPMENT TOOLS
Via the export function, the
support designs can be integ-
rated into complex 3D views
the LICAD user, LISEGA has also developedsupplementary software. The complete pack-age includes:
LICAD planning and design software forpipe supports
EASYSTEEL design program forsecondary steel
import and export interfaces for tablesand databases
interfaces with 3D CAD componentpackages
2D / 3D libraries for different CADprograms
interfaces to independent 3Dviewer programs
Internet communication systems fordownloading program updates andtransmitting project informationincluding drawings and orders
LICAD
EASYSTEEL
LICAD and EASYSTEEL are trademarks of LISEGA GmbH.
All other products, fonts and company names mentioned are
trademarks or registered trademarks of their respective companies.
8/11/2019 8 - Design Development Tools
5/15
8SOFTWARE WITH PROFIT EFFECT
Needed first - designed last
As a rule, the planning and design of com-plex pipe systems runs through numerousphases of optimization. Inevitably, the designof pipe supports takes place at the end ofthe whole process, and therefore oftencomes too late to ensure prompt delivery.Although the supports are needed on sitebeforehand in order to ensure optimuminstallation of the piping, they lie right atthe end of the planning chain.
At this point, it is even more vital to avoid
unnecessary delay. The time factor is now all
important.
LICAD speeds up the planning processLICAD, the unique LISEGA design programfor pipe supports, sets the highest standardsin efficiency. With LICAD, poring over catalogsand the painstaking preparation of bills ofmaterial can be dispensed with. The designof supports and load chains no longer needsto be configured manually and then drawnup at great expense in time and money.What otherwise takes hours to produce canbe done in minutes electronically - at theclick of a mouse!
Future orientated logisticsVia LICAD, savings in time are possible inthe logistics process from planning rightthrough to delivery. For example, if requiredthe LICAD data can be sent directly by acustomer to our maincomputer system for order processing on thesame day. This fits in well with ever tighterorder schedules!
LICAD
8.2
The latest version is now
available as Release 8 in
the following languages:
English, German, Spanish,Polish, French, Japanese
and Chinese
AutoCAD drawing based on
a LICAD design
8/11/2019 8 - Design Development Tools
6/158.3
LICAD is simple to useThe relevant data for individual supportpoints is entered using a menu driven prog-
ram control. Only 6 parameters are requiredin order to find the optimum solution.
pipe diameter temperature of the medium operating load travel installation height support configuration
From this input, the appropriate load chainsare created automatically and in fractions ofa second. The optimum selection of variable
spring and constant hangers is made by theprogram simultaneously. Specific customerrequirements, such as travel and load reservesin accordance with ASME, B 31.3, VGB or othercodes, are taken into account. This is provi-ded for by the corresponding input in a spe-cial menu. Considering these requirements,the programmed algorithm always ensuresthat the most economical solution will beselected from the possible options.
True to scale drawingsThe support chains created are automaticallysaved as complete assemblies and can beprinted or plotted as a drawing at any time.They are true to scale and contain allrelevant details, including parts lists withweights and material, and if required, pricingand location plan.
LISEGA modular system forms the basisA database system forms the basis of theprogram which the complete LISEGA product
range is incorporated into as a functionalmodular system. From more than 8000 stan-dard items, compatible herein with regard toloads and connections, more than 100 stan-dard configurations cover practically anyinstallation situation.
Free designation of axes
Clear prompts for all significant data on the
relevant support
Selection of support configurations
All essential functions at a glance
Simple registration of extra data
required
LICAD drawing generated
by a standard printer
8/11/2019 8 - Design Development Tools
7/158.4
8Location plan with axis markingsand dimensions
Detailed display in 3D models
Simple uniform surface for export function
The fully designed support with detailed bill
of material
Interference checksFor larger plant projects, the design of thebuilding structure, including steelwork, main
components and piping, is carried out via3D CAD programs, such as PDS/Microstation(Intergraph), Plant Space (Bentley) or PDMS(CADCENTRE). Planning continuity, as well asthe need to consider possible interferences,necessitate the inclusion of the pipe sup-ports in the process. Using defined interfaces,LICAD support designs can be transferredwith no additional effort three-dimensionallyand true to scale into the leading CADprograms .The standard LICAD drawings are automatically
transposed into 3D using special data files.
LICAD saves up to 50% of planning costsLICAD runs smoothly on any modern PC withWindows and is easy to use. Due to its parti-cular effectiveness, LICAD has already becomean indispensable tool for numerous enginee-ring departments when designing supports.Potential cost savings of up to 50% simplycannot be ignored!
Auxiliary steelworkLICAD creates ready to install load chainsfrom standard supports, from the buildingconnection right through to the pipe-surrounding attachment. In order to producethe connection to the existing structure,supplementary auxiliary structures are fre-quently required.Via a special interface, the appropriate LICADdesigns are transferred to a separate CADprogram (e.g. AutoCAD), where they can besupplemented as desired. In most cases,where designs are not to complicated,EASYSTEEL (see page 8.5) offers the idealsolution.
8/11/2019 8 - Design Development Tools
8/15
Selected beam with different
attachment and connecting
options
EASYSTEEL
8.5
Concept sketch
The ideal task when design-ing pipe supports is to con-nect a pipe directly to the
existing plant structure.However, due to the givensupport positions, in mostcases the existing plantstructure does not allow asuitable connenction. Thesupport designer is thenrequired to plan additionalsecondary steel, so-calledauxiliary structures.
Standard supportsWith LICAD, the most appropriate supportconfigurations in each case are determined,
then the corresponding standard supports inall their individual elements selected. A sup-port drawing, parts list and 3D model can allbe automatically generated using thissystem. If the standard supports cannot beconnected directly to the existing plant struc-ture, the next step is to use additional steelelements for the necessary adaptation.
Planning secondary steelAlthough this steel may consist of only 1 or2 items, each design is invariably unique, its
manufacture being both labour-intensive andcostly using traditional techniques.Creating the design and producing a drawingand a bill of materials with the cut lengthsand economic load calculations requires asignificant amount of time, even for simpledesigns.
With EASYSTEEL, LISEGA has now developeda powerful tool to reduce this time to a mini-mum and improve the quality of the designprocess. At the same time it ensures interfacecompatibility for electronic integration. Thenew LISEGA EASYSTEEL design program is alogical complement to the LISEGA modularsystem and the LICAD program.
The program can be used either indepen-dently or in conjunction with data importedfrom a LICAD file. The user is guided menu-controlled through the design process, usingeasy selection screens.
EASYSTEEL provides the user with the mostfrequently used forms of steel designs asbasic elements. The most common connec-tion types are also supplied. The user selectsthe appropriate design shape from the cor-responding selection screens and puts inthe relevant dimensions and interface data.The program then suggests beam sizes thatare compatible in dimension and loadingwith the LISEGA attachment component. Afurther feature is the possibility of adaptationto the surrounding structure.After the user has decided on the preferredsection size, the program generates a trueto scale drawing with bill of materials andcut list.
For the design elements available, EASY-STEEL contains a series of load capacitydata bases. The information needed for thedesign-related selection of frame elementsregarding weld sizes or bolt dimensions canbe found here.
8/11/2019 8 - Design Development Tools
9/158.6
8SPEZIAL FEATURES OF THE PROGRAM
Connection of the pipe support to the
secondary steelAll LISEGA standard elements that can beattached to the secondary steel are includedas an option, e. g.:
weld-on eye plates, weld-on clevises,types 73, 75
weld-on brackets, type 35
spherical washers, beam clamps,types 74, 78
clamp bases, type 49
constant hangers with supports,constant supports, types 11+71, type 16
seated spring hangers,spring supports, types 25, 26, 29
U-bolts, type 40
weld-on pipe shoes, stanchions,types 57, 58
roller bearings, types 51, 52, 53
beam adapters, type 76
Available options among the LISEGA standard pipe support connections
Selection screen for support attachment
8/11/2019 8 - Design Development Tools
10/158.7
Beam systemsThe program allows the selection of beamarrangements most commonly used for
secondary steel designs as standard:
beam between twoexisting structures
cantilever types
post types
Loading of beams is possible from aboveor below.
Section sizes
The program uses virtual section sizes andcovers a sufficiently wide range of commonlyused beam sections for various countries.
The list of programed beam sections consi-ders American, European, Japanese andChinese standards. After determination of arange of suitable steel sizes the designer candecide which national standards shall beused to generate the drawings.
Due to the modular program, and the use ofvirtual section sizes, further specific nationalstandards can be included.
This system allows the flexibility todesign independently of specific nationalstandards.
European ProfilesD, F
British ProfilesGB
American ProfilesUSA
Height x Widthapprox.
Internaldesign.
U100
U300
HEB100HEB300
IPE140IPE360
L50x6L100x10
SHP80x6.3
SHP200x10
C102x51
C305x102
2*(C102x51)UC305x305
UB127x76UB356x171
L50x50x6L100x100x12
TS80x80x6
TS200x200x10
C4x7.25
C12x30
W4x13W12x79
W6x9W14x38
L2x2x0.25L4x4x0.375
TS3x3x0.25
TS8x8x3/8
SC10
SC30
SH10
SH30
SI14
SI36
SL05
SL10
SQ08
SQ20
100 x 50
300 x 100
100 x 100
300 x 300
140 x 75
360 x 170
50 x 50
100 x 100
80 x 80
200 x 200
Sections (Channels)
Wide flange sections
Small flange sections
Angle sections
Square hollow sections
Standardized beam arrangements
Ranges of selected section sizes
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
//
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/ / / / / /
//////
//////
/ / / / / / / / / / / / / /
/ / / / / / / / / / / / / / // / / / / / / / / / / / / /
//////
/ / / / / / / / / / / / / / /
8/11/2019 8 - Design Development Tools
11/158.8
8
Weld sizes
Throat thickness 3 5 6 7 9 11 13 mm
Leg length 3/16 1/4 5/16 3/8 1/2 5/8 3/4 inch
Options of
steel attachment
Attachment to existing structureThe most common techniques for attachmentto the existing structure are available in the
program:
beam directly welded
beam with shim plates or beam withend-plate to spread the load
beam with bolt-on plates
welded clip-angle connections
cut-out flange connection to fit inbetweentwo beams (with or without end/shim plate)
beam end support on or under a roofgirder.
Weld sizesThe weld sizes selected by the program areload compatible with the LISEGA modularsystem whether the weld is measured in
throat thickness (mm) or leg length (inch,acc. to American standard).
Connection compatibilityGeometric checks are performed to avoiddesigns which would not fit when assembledon site. These checks include:
1. for welded attachments:
comparison of the width of the attachment(incl. weld seam) with beam width
determination of the weld size suitablefor the section and attachment according toprevailing rules and recommendations
2. for bolted connections:
selection of section sizes that allow com-patibility of bolt holes with each other
8/11/2019 8 - Design Development Tools
12/15
8/11/2019 8 - Design Development Tools
13/158.10
8A logical menu follow up
guides the user through
the design process
8/11/2019 8 - Design Development Tools
14/158.11
Component librariesFor further design in the 2D and 3D fields,LISEGA component libraries are available for
the following CAD programs:
AutoCAD, Autodesk PDS, INTERGRAPH PDMS, CADCENTRE SUPPORT MODELER,
Pelican Forge Corp. NAVISWORKS, LightWork Design
The LISEGA catalog items (Standard Supports2010) are available both as text and data-base files.
INTERFACES
2D applicationVia a DFX export file, the support design incl.dimensions can be transferred, with bills ofmaterials, location plans and letter heads asan option, to CAD programs, e.g.AutoCADor MicroStation.
3D applicationVia defined interfaces, the LICAD supportdesigns can be transferred true to scale andwithout additional effort into the leadingCAD programs. Using the component librariesas a basis, the standard CAD drawings canbe converted to 3D in the respective CADprograms. Among others, this is possiblewith:
PDS, INTERGRAPH PDMS, CADCENTRE SUPPORT MODELER, Pelican Forge
Corp. NAVISWORKS, LightWork Design
UpdatesLICAD, EASYSTEEL and other software pack-ages are being constantly updated and ex-panded. The respective valid program ver-sions and interfaces can be downloaded fromthe LISEGA homepage. The necessary licensenumbers are thereby issued to the user viae-mail as an automatic function. Additionalnumbers can also be supplied by phone.
COMPONENT LIBRARIES
8/11/2019 8 - Design Development Tools
15/15
NAVISWORK 3D Design ViewerIn partnership with LIGHTWORK DESIGN inthe UK, LISEGA has created an economical
and easy to utilize 3D design system forpipe supports. NAVISWORKS ROAMER is aproven 3D design review program independentof any CAD design package. It contains all thefunctions that a support designer requires tocheck a 3D plant model, the main featuresbeing:
navigation, communication andinteraction in real-time with verylarge 3D models on a desktop orlaptop computer.
interface to MicroStation(incl. PDS) and AutoCAD formats(incl. AutoPlant).
speed and ease in locating keycomponents.
snap-on measuring tool with theability to copy and paste dimensionsinto LICAD.
Fast Open GL graphics, enabling thequick and easy real-time navigationand viewing of very large models.
8 ease of use non-CAD-trained staff can
efficiently use the system after minimaltraining.
interference check (Clash Detector)module available.
export of JPEG and AVI files fortransmitting design review information(pictures).
QA enhanced by access to a singlemodel with up to date model description.
lifetime record storage of supportinformation with reduction in lifetime
maintenance costs using as-built model.
Users can import 3D plant models fromMicroStation and/or AutoCAD.3D pipe support models (generated in LICAD)can also be imported.LISEGA customers have the opportunity touse a full working version of the program fora 15 day trial. The program can be installedfrom the LISEGA Multimedia CD. Specimenmodels are also included on the CD.If the program is required for only one pro-ject, a program copy can be obtained throughLISEGA licensed only for this project.
VIEWER