Upload
saad-qureshi
View
230
Download
0
Embed Size (px)
Citation preview
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 1/52
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 2/52
needed for one subscriberto interconnect with any other in that network.
and
then gives the local switch the data necessary to identify therequired distant subscriber and hence to route the call properly.
It also of the call along its path.
Signaling also gives the subscriber certain ,such as , and .
may also be considered a
form of signaling.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 3/52
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 4/52
There are several classifications of signaling:
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 5/52
A functional breakdown of signaling.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 6/52
is provided between modern switchingmachines by
The is provided by
The functions inform thecalling subscriber regarding Theinforms the called subscriber of a call waiting or an extended off-hook condition of his or her handset.
Dial tone, Busy tone, Ring backRinging, Paging, Off-hook warning
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 7/52
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 8/52
Intentionally Left Blank
8(c) Irfan Khan
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 9/52
SUPERVISORY SIGNALING
the
whether a or whether a
How do we know the difference between supervisory and dialing?
Primarily by duration-The and is
(which is transmitted in the same direction for a longer
duration
The switch is sensitized to duration to distinguish betweensupervisory and dialing of a subscriber loop.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 10/52
SUPERVISORY SIGNALING
E and M Signaling
is ,particularly with
E-lead and M-lead signaling systems are semantically derived
from historical designation of signaling leads on circuit drawingscovering these systems
between theand what we may call
(signaling interface).
which carries signals to theswitching equipment
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 11/52
E and M signaling
E and M Signaling
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 12/52
Intentionally Left Blank
12(c) Irfan Khan
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 13/52
Each of these can derive the four E and M signaling states.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 14/52
Low-Frequency AC Signaling Systems
A n ac signaling system operatingare termed low
frequency.
Low-frequency signaling systems aretypically 50 Hz , 80 Hz , 135 Hz , or 200 Hz
It is such systemsbecause of the excessive distortion and band limitation
introduced.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 15/52
In-Band Signaling
to signaling systems using an , or
, to conveysignaling information.
Single frequency and two-frequency signaling systems utilize the 2000-
to 3000-Hz portion , where less speech energy is concentrated.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 16/52
Single-frequency signaling: In-band
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 17/52
Single-Frequency Signaling.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 18/52
F unctional block diagram of a single-frequency signaling circuit
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 19/52
Two-Frequency Signaling
, supervision is by necessity;
otherwise subscribers would have an annoying 2600-Hz
tone on throughout the call.
Two-frequency signaling is used for bothand .
systems is
The term while
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 20/52
, a to bypass signalingtones may be used.
A typical 2V F line signaling arrangement is thewhere and .
which refers to theby an inadvertent sequence of voice
tones through the normal use of the channel.
Two-Frequency Signaling
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 21/52
Out-of-Band Signaling
W ith out-of-band signaling,
The advantage of out-of-band signaling is that either system,, may be used when
Talk-down cannot occur because all supervisory information ispassed out of band
The preferred CCI TT out-of-band frequency is ,
whereas is commonly used in the United States.
Out-of band signaling is used exclusively oncarrier systems ( F DM), not on wire trunks.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 22/52
Out-of-Band Signaling
The major advantage of out-of-band signaling is that, whether
, during the entire telephone conversation.
Out-of-band signaling is one method of
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 23/52
Out-of-Band Signaling
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 24/52
Single-frequency signaling: out-of-band.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 25/52
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 26/52
Intentionally Left Blank
26(c) Irfan Khan
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 27/52
ADDRESS SIGNALING: INTRODUCTION
.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 28/52
Two-Frequency Pulse Signaling
Two-frequency signaling is commonly used as anemploying the for the
transmission of information.
uses and to represent.
It uses a four element code, permitting 16 differentcoded characters.
It may also be used for
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 29/52
Sending duration of binary elements 35 ± 7 ms. Sending duration of blank elements
between binary elements 35 ± 7 ms. Element x is 2040 Hz; element y is 2400 Hz.
CCITT Signal Code System No. 4
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 30/52
with the code is based on.
Each line signal consists of an
followed by a
The P signal consists of both frequencies (2VF),and the suffix signal consists of one frequency ,
where and
Two-Frequency Pulse Signaling
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 31/52
CCITT No. 4 Line Signaling
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 32/52
Multifrequency Signaling
It is an utilizing ,
Multifrequency signaling works equally well over
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 33/52
SOCOTEL
is an used principally in F rance,areas of F rench influence, and Spain with some modifications.
may be dc, 50 Hz, or 2000 Hz. T he samefrequencies are used in both directions.
Basic SOCO TEL MF Signaling Code
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 34/52
Multifrequency Signaling in North America: The R-1 Code
system principally used in theis recognized by the
It is frequency-pulse system.
are provided bycombinations using a .
The R-1 Code a (North American MF)
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 35/52
CCITT No. 5 Signaling Code.
Interregister signaling with the CCI TT No. 5 code is very
CCITT No. 5 Codea Showing Variations with R-1 Code
CCITT No. 5 Line-Signaling Code
Line signaling for CCI TT No. 5 code is2VF, with f1 2400 Hz and f2 2600 Hz
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 36/52
The R-2 Code
The R-2 code is listed by CCI TT ( as a
Taking full advantage of combinations of ,
This number is doubled in each direction by having meaningand
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 37/52
European R-2 System, Address Signaling, D TMF Code
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 38/52
Line Conditions for R-2 Code
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 39/52
Subscriber Tones and Push-Button Codes (North America)
in many places in the world are either dial orpush button.
is more versatile, and more rapid dialingcan be accomplished by a subscriber.
North American Push-Button Codes
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 40/52
Audible Tones Commonly Used in North America
(Call-progress tones presented to the subscriber)
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 41/52
Intentionally Left Blank
41(c) Irfan Khan
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 42/52
An important factor to be considered in switching system design thatdirectly affects both and is
*Postdialing delay
T his is the amount of time it takes after the calling subscriber completes
dialing until is received.
Another important consideration isas the setup proceeds from originating exchange to terminating
exchange.
Register occupancy time
By reducing register occupancy per call , we may be able to.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 43/52
o Link-by-link signaling may be defined as a signaling system where
must be
Link-by-link signaling
o The R-1 system is an example of link-by-link signaling.
o End-to-end signaling abbreviates the process such that tandem/transit exchanges receive only the
End-to-end signaling
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 44/52
o The need beonly between the exchange and theexchange in the call setup.
T hus the signaling process may be carried out much morerapidly, .
Intervening exchanges on the call route ,
to thenext exchange in the sequence.
Leading register:
o The key to end-to-end signaling is the concept of leadingregister.
thatrouting until a speech path is set
before releasing to prepare for another call setup.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 45/52
345-6789 345-6789 34 45
6789
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 46/52
Intentionally Left Blank
46(c) Irfan Khan
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 47/52
, the assignment and use of telephone numbers,
There can be two types of numbering schemes:
1. Uniform numbering
Most in the nontoll or local-area case arebased on , although some are based on six.
Uniform numbering can
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 48/52
1. The with the callbecause it "knows when the last digit has been
received.2. Knowing the number of digits to expect provides
and makes simpler.
For nonuniform numbering,built in. It is the initial digit or digits that will
tell how many digits are to follow, at least in theory.
1. Nonuniform numbering
W ith nonuniform numbering, anacross a network up to the
terminating exchange, and the call setup is released only after
time out has run its course.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 49/52
W ith nonuniform numbering systems, national andinternational networks are better
with good features of backwardinformation, such as the R-2 system.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 50/52
Intentionally Left Blank
50(c) Irfan Khan
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 51/52
Conventional analog associated channel signaling (upper drawing) versus separate channel signaling (lower drawing).;
. CCS = common channel signaling such as CCI TT Signaling System No. 7.
8/3/2019 8.1 Signaling for Analog Telephone Networks
http://slidepdf.com/reader/full/81-signaling-for-analog-telephone-networks 52/52
Separate channel signaling may or may not go on that samemedium or path.
The European PCM system called E1 uses this type of signaling
One separate digital channel covers all supervisory signaling for 30traffic channels.
If it travels on the same medium and path as its associated trafficchannels, it is still associated channel signaling.
That separate channel can follow a different path using, perhaps,different media.
CCITT Signaling System No. 7 is always a separate channel, but canbe associated or disassociated.