7/23/2019 830E Frame Form

1/5CEHQ003200 830E FRAME INSPECTION REPORT Pa

KOMATSU 830E DUMP TRUCK - FRAME INSPECTION REPORT

Unit Unit Hours Inspected By Date Status

(X the applicable box at right)

No Repairs Repairs Requi

Wash unit, clean all weld joints, and visually inspect for cracking or damage. Indicate the location of any cracks on the appropriate drawing

views by marking the approximate location and length of crack. For reference purposes, draw an arrow to the crack location, number the

arrow, and indicate whether inside or outside, top or bottom view, as appropriate. Describe each crack on page 4.

Komatsu Serial Number Customer Name Location

7/23/2019 830E Frame Form

2/5CEHQ003200 830E FRAME INSPECTION REPORT Pa

7/23/2019 830E Frame Form

3/5CEHQ003200 830E FRAME INSPECTION REPORT Pa

7/23/2019 830E Frame Form

4/5CEHQ003200 830E FRAME INSPECTION REPORT Pa

KOMATSU 830E DUMP TRUCK - FRAME INSPECTION REPORT

Describe all frame cracks or related damage.

Reference

NumberDescribe Position Of Crack Or Damage Crack Length Parent Metal Weld Metal

Previous

Repair

SKETCH

7/23/2019 830E Frame Form

5/5CEHQ003200 830E FRAME INSPECTION REPORT Pa

KOMATSU 830E DUMP TRUCK - FRAME INSPECTION REPORT

With the truck unloaded and parked on level ground, inspect the Hydrair suspensions and record these dimensions:

PISTON EXTENSION DIRT RING HEIGHT

LEFT FRONT

RIGHT FRONT

LEFT REAR

RIGHT REAR

Check and record the dump body lateral guide clearances:

LEFT CLEARANCE RIGHT CLEARANCE

Check and record body pad condition and adjustment:

REAR PAD CENTER PAD FORWARD PAD

LEFT

RIGHT

Check and record dump body pivot bushing condition. OK WORN

ADDITIONAL COMMENTS