857 6 - drivcat.com · • Place your Engine Express order as late as 8:00 p.m. Eastern and receive the engine kit the next day. Phone orders only. • Engine Express kits will be

Available Sealed Power® and Speed-Pro® Kits

Call as late as…

©2008 Federal-Mogul Corporation. All rights reserved. *Where next-day delivery is available

Order today. Rebuild tomorrow.With over 1 million engine kit combinations available, Sealed Power has your rebuild needs covered – and in record time!The Engine Express program can deliver a Sealed Power passenger car or light truck engine kit anywhere in the continental U.S. overnight.* – It’s a real lifesaver when those last-minute calls come in. And overnight shipping is one flat rate per kit! Free shipping applies to engine kit ground shipments. (And for performance engine rebuilds, we also offer Speed-Pro® engine kits – the best value in performance parts!)

Sealed Power®Engine Kits available overnight for just one, low flat shipping rate per kit. *

eastern pacificmountaincentral

• Locate the correct kit part number in the Sealed Power Vol I or Vol II Catalogs. Be sure to ask your customer about any desired over and under sizes when taking the engine kit details.

• Call your Sealed Power Engine Express Kit Supplier.

• Need help? Federal-Mogul Engine Express Customer Service Specialists can guide you through the final size selection for the main bearing set, connecting rod bearing pair/set, pistons and rings.

• Substitutions? Let our customer service specialist know your specific customer needs and they will help guide you through the available options/substitutions. For example, does your customer require a high volume oil pump? Forged vs. cast pistons? We can help!

• Place your Engine Express order as late as 8:00 p.m. Eastern and receive the engine kit the next day. Phone orders only.

• Engine Express kits will be received at the place of business by 5:00 p.m. the following day.

Master Kit without Pistons

Master Kit

Block Kit with Pump & Plugs

Master Kit without Rod Bearings & Main Set Re-ring Kit with Mains

Block Kit

Instructions

8 567

Cam Change Kit Re-ring Kit

i

TABLE OF CONTENTSHow to Use This Catalog ................................................................iAbbreviations ............................................................................ iv-vEngine Families ............................................................................... iiEngine Kits ......................................................................................viKey to Part Numbers ..................................................................... iii

Application Listings ....................................................................... 1Engine Kit Bill of Material .......................................................... 961Numerical List........................................................................... 1043

HOW TO USE THIS CATALOG

Products & WarrantySee Sealed Power SP1502 Vol 2, catalog,

companion to SP1501for complete product detail and warranty information.

This catalog is designed to allow expedient identification of correct parts.

The catalog is sorted as follows:

1ST by VEHICLE MANUFACTURER. All GM products are listed under GM.

2ND by ENGINE DISPLACEMENT.3RD by BORE DIAMETER. Engines with the

same displacement are sorted by bore diameter.

4TH by VALVETRAIN CONFIGURATION. DOHC engines will be listed before SOHC engines.

5TH by INDUCTION SYSTEM. Normally aspirated engines will be listed before Turbos.

The pages within the applications are easy to read, yet contain all the information required to select the correct part. A listing will contain three distinct sections – Valvetrain, Block and Kits.

VALVETRAIN BLOCK KITSTiming Pistons Re-ring KitsCamshafts Rings Master KitsLifters Sleeves Block KitsCam Kits Engine Bearings Push Rods Oil Pumps Rocker Parts GasketsValves Freeze PlugsValve Guides Valve Springs Valve Seals Valve Seats Valve, Misc.

This edition of the Sealed Power Engine Parts Catalog includes performance upgrade parts. We have listed some entry level, “one or two step over stock”, performance timing sets, camshafts and push rods in the more popular engine listings. These frequently requested products represent only a small sampling of the Speed-Pro complete performance line. For complete performance coverage, see the Speed-Pro Performance Catalog (No. X-3009).

ii

ENGINE FAMILIESThe following vehicle makes are covered in this catalog:

FAMILY PAGE NO.Acura ................................................... See Honda CarAMC .............................................................................. 1Audi ............................................................................ 23BMW ............................................................................ 28British Leyland ............................................................ 30Buick ..........................................................See GM CarCadillac .....................................................See GM CarChecker ...................................................See Eng. Mfr.Chevrolet ..................................................See GM CarChevrolet Minivans ............................ See GMC TruckChevrolet SUV's .................................. See GMC TruckChevrolet Truck .................................. See GMC TruckChrysler Car ............................................................... 32Chrysler Marine ........................................................ 111Chrysler Minivans ............................. See Dodge TruckChrysler Truck ................................... See Dodge TruckDaihatsu Car ............................................................ 126Datsun ..........................................................See NissanDodge Car ........................................ See Chrysler CarDodge Minivans .............................. See Dodge TruckDodge SUV's .................................... See Dodge TruckDodge Truck (Incl. Minivans & SUV's) ................... 127Eagle .................................................. See Chrysler CarFiat ............................................................................ 174Ford Car ................................................................... 177Ford Minivans ........................................ See Ford TruckFord SUV's .............................................. See Ford TruckFord Truck (Incl. Minivans & SUV's) ........................ 295Geo ............................................................See GM CarGM Car .................................................................... 383GMC Minivans .................................... See GMC TruckGMC SUV's .......................................... See GMC TruckGMC Truck (Incl. Minivans & SUV's) ...................... 609Honda Car ............................................................... 717IHC Truck .................................................................. 735Isuzu Car ................................................................... 751Isuzu Truck (Incl. Minivans & SUV's) ........................ 756Jeep .......................................................................... 763Lada ......................................................................... 790Lincoln Car ...............................................See Ford CarMazda Car ............................................................... 790Mazda Minivans .............................. See Mazda TruckMazda Truck (Incl. Minivans & SUV's) ................... 800Mercedes ................................................................. 807Mercury ....................................................See Ford CarMercury Marine ....................................................... 809

FAMILY PAGE NO.MG .................................................. See British LeylandMitsubishi Car ........................................................... 832Mitsubishi Minivans ...................... See Mitsubishi TruckMitsubishi SUV's ............................ See Mitsubishi TruckMitsubishi Truck (Incl. Minivans & SUV's) ............... 845Nissan Car ................................................................ 851Nissan Minivans ..................................See Nissan TruckNissan SUV's ........................................See Nissan TruckNissan Truck (Incl. Minivans & SUV's) ..................... 869Oldsmobile ................................................See GM CarOMC Marine ............................................................ 878Opel .......................................................................... 894Peugeot ................................................................... 895Plymouth ........................................... See Chrysler CarPlymouth Minivans .......................... See Dodge TruckPontiac ......................................................See GM CarRenault ..................................................................... 896Rover Truck .............................................................. 897Saab ......................................................................... 898Standard Motors ..................................................... 899Studebaker Car ....................................................... 900Studebaker Truck .................................................... 904Subaru Car ............................................................... 905Subaru Truck ............................................................ 908Suzuki Car ................................................................. 908Suzuki SUV's ........................................ See Suzuki TruckSuzuki Truck (Incl. SUV's) ......................................... 910Toyota Car ............................................................... 912Toyota Minivans................................See Toyota TruckToyota SUV's ......................................See Toyota TruckToyota Truck (Incl. Minivans & SUV's) .................... 931Triumph .......................................See Standard MotorsVolvo ......................................................................... 942Volvo Marine ........................................................... 944VW Car ..................................................................... 949VW Truck .................................................................. 956Yugo ......................................................................... 959

iii

KEY TO PART NUMBERSProduct

LinePrefix Suffix

Prefix Suffix Description

All Products

B R

Suffix Suffix

Bulk Package Performance

Camshafts CS KC KCT

Prefix Prefix Prefix

Camshafts Cam & Lifter Kit w/prelube Cam & Lifter Kit w/Timing Set & Prelube

Engine Bearings

A AF AP BF CA CH CP DR F

MA P

RASBSHV

VAWXY

YA

Suffix Suffix Suffix Suffix Suffix Suffix Suffix Suffix

Suffix Suffix Suffix Suffix SuffixSuffixSuffixSuffixSuffixSuffixSuffixSuffix

Premium A-Series Bi-Metal Aluminum Alloy Steel-backed Aluminum Thrust Washer Steel-backed Aluminum Alloy w/Overplate Steel-backed Bronze Thrust Washer Steel-backed Copper Alloy w/o Overplate — Resizable Steel-backed Alloy w/Overplate — Super Duty Steel-backed Alloy w/Overplate Steel-backed Babbitt, Steel-backed Bi-metal Alloy or Cam Bearing Thrust Washer Set Premium A-Series Bi-Metal Aluminum AlloySteel-backed Copper-lead Alloy w/OverplateSteel-backed Aluminum AlloySteel-backed BabbittSteel-backed BabbittBronze Pin Bushing w/Seam or Butt JointBronze Pin Bushing w/Seam or Butt JointCamshaft Thrust WasherFull Round Piston Pin BushingBi-metal Pin Bushing w/Seam or Butt JointBi-metal Pin Bushing w/Seam or Butt Joint

Engine Kits 205205-M

M505BK

BKPMK

MKPMKF

PrefixPrefixSuffixPrefixPrefixPrefixPrefixPrefixPrefix

Rering Kit Rering Kit w/Main SetRering Kit w/Main SetMaster Kit w/o Rod & Main BearingsBlock KitBlock Kit w/Freeze Plugs & Oil PumpMaster Kit w/o PistonsMaster KitMaster Kit w/Forged Pistons

Freeze Plugs

381 Prefix Expansion Plug Kit

Gaskets 260 Prefix Gasket, Gasket Set Oil Pumps 224

PPSSVVS

PrefixSuffixSuffixSuffixSuffixSuffix

Oil pumps & components High PressureHigh Pressure Incl. ScreenIncludes ScreenHigh Volume PumpHigh Volume Incl. Screen

Piston Pin P Prefix Piston PinPiston Rings

KKCKXWX

SuffixSuffixSuffixSuffixSuffix

Moly SetChrome SetPremium Chrome or Moly SetSingle Piston Ring SetPlain Set

Pistons CPCTH KLW

SuffixSuffixPrefix PrefixPrefixPrefix

DUROSHIELD™ PistonTHERMOSHIELD® PistonHypereutectic PistonPiston & Ring Combination Sets POWERFORGED® PistonSingle Piston

Push Rods BPRRP

PrefixPrefix

Bulk Push RodsPush Rod

Product Line

Prefix Suffix

Prefix Suffix Description

Rocker Arm Parts

A MRR

RARRRSRT

Suffix PrefixPrefixPrefixPrefixPrefixPrefix

Rocker Arm Only Miscellaneous Components (Nuts, Studs, Pivots) Rocker Arm or Rocker Arm Kit Rocker Arm Assembly Roller Rocker Rocker Arm Shaft Rocker Shaft Support

Rotocaps ARCS

SA

Suffix Prefix SuffixSuffix

Rotocap Assembly Rotocaps or Rotocap Assembly RotocapRotocap Assembly

Sleeves A Prefix Dry Sleeves & Sleeve AssembliesTiming Components

220221222223KTKT2KT3

PrefixPrefixSuffixPrefixPrefixPrefixPrefix

Timing Speed Set Timing Gears & Gear Sets Timing Chains, Belts, Guides & TensionersTiming SprocketMultiple Piece SetTwo Piece Timing KitThree Piece Timing Kit

Valve Guides

5000T

VGH

SeriesSuffixPrefixSuffix

Conversion Type GuideThreaded Valve GuideValve GuideHardened

Valve Lifters

ATHT

PrefixPrefix

Mechanical LifterHydraulic Lifter

Valve Locks

RVK

SuffixPrefix

Hardened Valve Lock Valve Lock

Valve Seats

2451-49

50+upCEN

PrefixSuffixSuffixSuffixSuffixSuffix

Valve SeatDifferent I.D. & Depth VersionsOversize Inserts for Aluminum Cylinder HeadsValve Seat w/Stellite #3 (Cobalt)Factory Installed SeatPremium Material

Valve Spring Inserts

259ABC

PrefixSuffixSuffixSuffix

Valve Spring Insert.060” Thick Valve Spring Insert.030” Thick Valve Spring Insert.015” Thick Valve Spring Insert

Valve SpringRetainers

VSR Prefix Valve Spring Retainer

Valve Springs

VS Prefix Valve Spring

Valve Stem Cups

VC Prefix Valve Stem Cup

Valve Stem MT Prefix Valve Guide Cutter ToolOil Seals BC

CMV

SST

PrefixPrefixPrefixSuffixPrefix

100 Bulk PackApplications QTY PackUmbrella Type Valve SealValve Stem Seal SetPositive Type Valve Seal

Valves AKVX

SuffixSuffixPrefixSuffix

Valve AssemblyValve KitIntake & Exhaust ValvesSpecial Material Indicator

iv

ABBREVIATION DESCRIPTION& ..........................................................................................And2WD .............................................................. Two Wheel Drive4WD ............................................................. Four Wheel DriveA.I.R. ......................................................... Air Injector ReactorA/C ................................................................Air ConditioningA/R ........................................................................As RequiredA/T ..................................................... Automatic TransmissionABS ......................................................Anti-lock Brake SystemAC .............................................................Alternating CurrentAcc. ......................................................................... AccessoryAdj. .......................................................................... AdjustableAdv. ...........................................................................AdvanceAft.......................................................................................AfterAlt. ................................................................................ AltitudeAlum. .........................................................................AluminumAmp. ............................................................................AmpereAOD ...................................................... Automatic OverdriveAppl. ......................................................................ApplicationApprox. ............................................................ ApproximatelyAsst. ................................................................................... AssistAssy. ...........................................................................AssemblyATV .............................................................. All Terrain VehicleAuto. ....................................................................... AutomaticAuto. Trans. ...................................... Automatic TransmissionAux. ..............................................................................AuxiliaryAvail. ......................................................................... AvailableAvg. ...........................................................................AverageAWD .................................................................All Wheel DriveBal. ............................................................................. BalanceBatt. ................................................................................BatteryBbl. ................................................................................... BarrelBbl. Carb. ....................................................Barrel CarburetorBef. ..................................................................................BeforeBrg. ................................................................................BearingBrkt. ...............................................................................BracketC ..................................................................................... CelsiusC.I. .............................................................................. Cast IronC.R. ........................................................... Compression RatioC/L ...........................................................................CenterlineCalib. ....................................................................CalibrationCalif. .........................................................................CaliforniaCam ........................................................................ CamshaftCan. .......................................................................... CanadaCarb. ..................................................................... CarburetorCat. .......................................................................... Catalyticcc ..............................................................Cubic CentimeterCCW ....................................................... Counter ClockwiseCD ..................................................... Compression DistanceCFFI .......................................................... Cross Fire InjectionCFI ....................................................... Central Fuel InjectionCFM...................................................Cubic Feet per MinuteCID ............................................Cubic Inch (Displacement)Cld. ............................................................................. CooledClg. ............................................................................CoolingClr. .................................................................................Cooler

ABBREVIATION DESCRIPTIONcm .........................................................................CentimeterCntr. Bore .........................................................Counter BoreCompl. ....................................................................CompleteCon. Rod .................................................... Connecting RodCruise ...............................................................Cruise ControlCtr. ............................................................................... CenterCW ..........................................................................ClockwiseCyl. .............................................................................CylinderCyl. Hd. ........................................................... Cylinder HeadDC ....................................................................Direct CurrentDeg. ............................................................................ DegreeDFI ......................................................... Digital Fuel InjectionDia. ........................................................................... DiameterDim. ........................................................................ DimensionDir. Inj. ............................................................Direct InjectionDisc. .................................................................. DiscontinuedDist........................................................................... DistributorDOHC .........................................Dual Overhead CamshaftDr. ...................................................................... Door or DriveE.E.C. ............................................ Electronic Engine ControlE.I.S. .............................................. Electronic Ignition SystemEa. ................................................................................... EachEcc. ..........................................................................EccentricECM ...................................... Electronic Computer ModuleECM ............................................Electronic Control ModuleECM .................................................Engine Control ModuleEcon. ........................................................................EconomyECS ............................................Electronic Controlled SparkEFI ....................................................Electronic Fuel InjectionElec. .............................................................................ElectricEmis. .......................................................................... EmissionEng. .............................................................................. EngineEquip. .................................................................... EquipmentEtc. ...........................................................................Et CeteraExc................................................................................ ExceptExh. .............................................................................. ExhaustExp. ................................................................................ExportExt. ................................................................................ExteriorExt. ...............................................................................ExternalF ..............................................................................FahrenheitFed. . ........................................................................... FederalFI ........................................................................ Fuel InjectionFlex. .............................................................................FlexibleFlg. ................................................................................ FlangeFlwr. ........................................................................... FollowerFrg. ............................................................ Forged or ForgingFrt. ....................................................................................FrontFWD ............................................................Front Wheel DriveGal. ...............................................................................GallonGas............................................................................GasolineGPH ............................................................. Gallons Per HourGPM .........................................................Gallons Per MinuteGrv(s). .....................................................................Groove(s)Gskt. ............................................................................GasketGVW ................................................... Gross Vehicle WeightH/D .......................................................................Heavy DutyHd. ...................................................................................HeadHEI ..........................................................High Energy IgnitionHi .......................................................................................High

ABBREVIATIONS

v

ABBREVIATION DESCRIPTIONHi Alt. ..................................................................High AltitudeHi-Perf. ......................................................High PerformanceHi-Temp. ...................................................High TemperatureHO .......................................................................High OutputHoriz. ....................................................................... HorizontalHP ........................................................................ HorsepowerHSC ....................................................High Swirl CombustionHyd. ..........................................................................HydraulicI/C ......................................................................... IntercoolerI.D. .................................................................... IdentificationID ................................................................... Inside DiameterIn. Frm. ...................................................................... In Framein. .......................................................................................InchIncl. ............................................................................ IncludesInd. ............................................................................ IndustrialInj. .............................................................................. InjectionInt. ................................................................................. IntakeInter. ...................................................................IntermediateL ......................................................................................... LiterL.H. .......................................................................... Left HandL/D ...........................................................................Light DutyLgth. ............................................................................ LengthLPG .........................................................Liquid Propane GasM/D ...................................................................Medium DutyM/T ........................................................Manual TransmissionMan. ............................................................................ManualMan. Trans. ...........................................Manual TransmissionMax. ........................................................................ MaximumMech. ................................................................. MechanicalMFI ....................................................Multi-Port Fuel InjectionMin. .......................................................................... Minimummm ......................................................................... MillimetersMPH ..................................................................Miles Per HourMtl. .............................................................................MaterialN/A ................................................................... Not AvailableN/R .................................................................... Not RequiredNat. ............................................................................. NaturalNat. Asp. ...............................................Naturally AspiratedNeg. ......................................................................... NegativeNeut. ............................................................................NeutralNo............................................................................... NumberNom. ..........................................................................NominalNorm. ...........................................................................NormalO.A.L. ..............................................................Overall LengthO.E. .........................................................Original EquipmentO/D ......................................................................... OverdriveO/S .............................................................................OversizeObs........................................................................... ObsoleteOD ............................................................. Outside DiameterOEM ...............................Original Equipment ManufacturerOHC ............................................................. Overhead CamOHV ............................................................ Overhead ValveOpt. ...........................................................................OptionalOrig. ............................................................................Originaloz. ................................................................................. OunceP. T.O. .............................................................Power Take OffP/S .................................................................. Power SteeringPass. ........................................................................PassengerPc(s). .......................................................................... Piece(s)

ABBREVIATION DESCRIPTIONPCV ..................................... Positive Crankcase VentilationPerf. ................................................................... PerformancePkg. .......................................................................... PackagePos. .............................................................................. PositivePrem. ......................................................................... PremiumPri. .................................................................................PrimaryPSI ..................................................... Pound Per Square InchPwr. ............................................................................... PowerQtr. ..............................................................................QuarterQty. ........................................................................... QuantityR.B.P. ..............................................................Ring Below PinR.H. ........................................................................Right HandRef. ........................................................................ReferenceReg. .............................................................................RegularReman. ...................................................... RemanufacturedReq’d ....................................................................... RequiredRev. ............................................................................ RevisionRev. Rot. ....................................................Reverse RotationRlr.....................................................................................RollerRMB ..........................................................Rear Main BearingRot. ............................................................................RotationRPM ...................................................Revolutions Per MinuteRr. ..................................................................................... RearRWD ........................................................... Rear Wheel DriveS/C .................................................................. SuperchargedSeal. Rings .........................................................Sealing RingsSer. ...................................................................Serial or SeriesSer. No. ............................................................Serial NumberSFI ...................................................Sequential Fuel InjectionSlv. .................................................................................SleeveSOHC ................................................ Single Overhead CamSpd. ...............................................................................SpeedSpec. ........................................................................... SpecialSta. ............................................................................... StationStd. ........................................................................... StandardSys. ............................................................................... SystemT/C .................................................................. TurbochargedTach .................................................................... TachometerTBI .......................................................Throttle Body InjectionTemp. ................................................................TemperatureTPI ...........................................................Tuned Port InjectionTrans. ................................................................... TransmissionTrk. ................................................................................... TruckTTY .................................................................. Torque-to-YieldTURBO ............................................................. TurbochargedU/S .......................................................................... Under SizeVeh. ............................................................................ VehicleVIN........................................Vehicle Identification NumberVIV .................................................................................. ValveVSS ...............................................................Valve Stem Sealw/ ......................................................................................Withw/o ..............................................................................WithoutWagon ........................................................... Station WagonWt. ................................................................................Weight

ABBREVIATIONS

vi

ENGINE KITSSealed Power offers seven different types of Engine Kits and six different types of Camshaft Kits. The catalog references the kit type in the Description with the corresponding kit number, including the kit type prefix.

In addition to the kit types, Sealed Power Engine Kits allow one component substitution and one deletion to fit the specific engine rebuild need.

Note: The above tables list the components found in most kits. Some kit components may deviate from this table. Please refer to the Bill of Materials section in the rear of this catalog for a precise listing of components included in each kit.

CAM CHANGE KITS

Kit Component Master Kit

Master Kit w/o Pistons

Master Kit w/o Rod Brgs

& Main SetBlock Kit with Pump & Plugs Block Kit

Re-Ring Kit w/Main Re-Ring Kit

MKP MK 505 BKP BK 205-_ _ _ M 205

Rings Rings Rings Rings Rings Rings Rings Rings

Gaskets Gaskets Gaskets Gaskets Gaskets Gaskets Gaskets Gaskets

Cam Brgs (Where Applicable) Cam Brgs Cam Brgs Cam Brgs Cam Brgs Cam Brgs

Oil Pump Oil Pump Oil Pump Oil Pump Oil Pump

Freeze Plugs Freeze Plugs Freeze Plugs Freeze Plugs Freeze Plugs

Camshaft Camshaft Camshaft Camshaft

Lifters Lifters Lifters Lifters

Timing Set Timing Set Timing Set Timing Set

Pistons Pistons Pistons Pistons Pistons

Rod Bearings Rod Bearings Rod Bearings Rod Bearings Rod Bearings Rod Bearings Rod Bearings

Main Bearings Main Bearings Main Bearings Main Bearings Main Bearings Main Bearings

Kit Component

Cam & Lifter Kit

Cam & Follower Kit

Cam, Lifter &

Follower Kit

Cam, Lifter &

Timing Kit

Cam, Follower & Timing Kit

Cam, Lifter, Follower & Timing Kit

KC- KC- KC- KCT- KCT- KCT-

Camshaft Camshaft Camshaft Camshaft Camshaft Camshaft Camshaft

Lifters Lifters Lifters Lifters Lifters

Followers Followers Followers Followers Followers

Timing Set Timing Set Timing Set Timing Set

Gaskets

Prelube Prelube Prelube Prelube Prelube Prelube Prelube

1

Acura - See Honda CarAMC

Engine Finding Index

Engine YearFor Line

No. Engine YearFor Line

No.

1.4L 85.2 (1397cc) OHV L4 76mm Bore (8 Valve)(Renault Eng.)........................................................ 1987-83 .......1

2.0L 121 (1984cc) SOHC L4 86.5mm Bore (8Valve) (Audi Eng.).................................................. 1979-77 .......2

2.5L 150 OHV L4 3.875" Bore (AMC) ...................... 1988-83 .......32.5L 151 OHV L4 4" Bore (Pontiac) (GMC Eng.) ..... 1983-80 .......43.0L 184 L-HEAD L6 3.125" Bore (Nash)................. 1953 ............53.2L 195.6 OHV L6 3.125" Bore (AMC) ................... 1965-58 .......63.2L 195.6 L-HEAD L6 3.125" Bore (AMC) .............. 1965-52 .......73.3L 199 OHV L6 3.75" Bore.................................... 1970-65 .......83.8L 232 OHV L6 3.75" Bore (Hi Torque)................. 1979-64 .......9

4.1L 250 OHV V8 3.5" Bore (AMC) .......................... 1959-56 .....104.2L 258 OHV L6 3.75" Bore.................................... 1988-71 .....114.7L 287 OHV V8 3.75" Bore ................................... 1966-63 .....124.7L 290 OHV V8 3.75" Bore ................................... 1969-66 .....135.0L 304 OHV V8 3.75" Bore ................................... 1979-70 .....145.3L 327 OHV V8 4" Bore (Vigilante) ....................... 1966-56 .....155.6L 343 OHV V8 4.08" Bore ................................... 1969-67 .....165.8L 352 OHV V8 4" Bore (Packard)........................ 1956 ..........175.9L 360 OHV V8 4.08" Bore ................................... 1978-70 .....186.4L 390 OHV V8 4.165" Bore ................................. 1970-68 .....196.6L 401 OHV V8 4.165" Bore ................................. 1976-71 .....20

Engine Code Index

Engine Code Engine Description No.Line

Engine Code Engine Description No.Line

C3J ........................... 1.4L 85.2 (1397cc) OHV L4 76mm Bore (8Valve) (Renault Eng.) .................................. 1

1.4L 85.2 (1397cc) OHV L4 (8 Valve), 76mm Bore (Renault Eng.) 1987-83VIN Codes "D" 1983-87, "E" 1983-85, Eng. Code "C3J" 1983-87

1ENGINE BEARINGSQTY YEARS DESCRIPTIONPART NO.Thrust Washer Set 87-83 1 60476BF Std Only Position 3

2.0L 121 (1984cc) SOHC L4 (8 Valve), 86.5mm Bore (Audi Eng.) 1979-77VIN Codes "G" 1977-79, "K" 1977

2TIMINGQTY YEARS DESCRIPTIONPART NO.Timing Belt 79-77 1 222-17Timing Belt & Tensioner Set 79-77 1 BTS-17

VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Spring Insert 79-77 8 259-201B .030"; Carton of 100Spring Insert 79-77 8 259-201A .060"; Carton of 100Spring Insert 79-77 8 259-201ARS .060"; Carton of 500

FREEZE PLUGSQTY YEARS DESCRIPTIONPART NO.Brass Block Plug Kit 79-77 1 381-8036

2.5L 150 OHV L4 (AMC), 3.875" Bore 1988-83VIN Code "U" 1983-88

3TIMINGQTY YEARS DESCRIPTIONPART NO.3 Piece Set 87-83 1 KT3-3SR64S Incl. (1) 222-3SR64, (1) 223-607, (1) 223-608ATiming Chain 87-83 1 222-3SR64 Single rlr.; 64 LinksTiming Chain Tensioner 87-83 1 222-167CTCrank Sprocket 87-83 1 223-607 24 TeethCam Sprocket 87-83 1 223-608A 48 Teeth

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Camshaft 85-83 1 CS-779Lifter 85-83 8 HT-2011 Std Only Hyd.Lifter, Bulk 85-83 8 HT-2011B Std Only Hyd.; Carton of 117Prelube 85-83 1 55-400 4 oz. bottle; 1.5 oz. packet No. 55-403 also avail.

CAM KITQTY YEARS DESCRIPTIONPART NO.Cam/Lifter Kit 85-83 1 KC-779 Hyd.; Incl. (1) CS-779, (8) HT-2011, (1) 55-403BCam/Lifter/Timing Kit 85-83 1 KCT-779 Hyd.; Incl. (1) CS-779, (8) HT-2011, (1) KT3-3SR64S, (1)

55-403B

PUSH RODQTY YEARS DESCRIPTIONPART NO.Push Rod 85-83 8 RP-3236 9.4860" O.A.L.Push Rod, Bulk 85-83 8 BRP-3236 Carton of 100; 9.4860" O.A.L.

ROCKER PARTSQTY YEARS DESCRIPTIONPART NO.Arm Assy. 85-83 4 R-905 Incl. 2-arms, 2-pivots & 1-bridge; Stamped rocker armArm Assy., Bulk 85-83 4 R-905B Incl. 2-arms, 2-pivots & 1-bridge; Stamped rocker arm;

Carton of 32Arm 85-83 8 R-905A Stamped rocker armBridge 85-83 4 MR-1840Pivot 85-83 4 MR-1909 Incl. 2-pivots & 1-bridgePivot 85-83 8 MR-1839 Pivot only

VALVE

TRAIN

VALVE

TRAIN

(continued on next page)

2

AMC2.5L 150 OHV L4 (AMC), 3.875" Bore 1988-83VIN Code "U" 1983-88

3(cont.)

VALVEQTY YEARS DESCRIPTIONPART NO.Exhaust 85-83 4 V-2295 Std Only Chrome plated stem; Square cut key groove; 1.5000" Head

Dia., .3115" Stem Dia., 4.9390" O.A.L.Intake 85-83 4 V-2294 Std Only Chrome plated stem; Square cut key groove; 1.9100" Head

Dia., .3115" Stem Dia., 4.9110" O.A.L.

VALVE SPRINGQTY YEARS DESCRIPTIONPART NO.Spring 85-83 8 VS-822 Cylindrical shape; 1.8340" Free Height

VALVE SEALQTY YEARS DESCRIPTIONPART NO.Valve Stem Seal 85-83 8 ST-2043 Positive type; RubberValve Stem Seal Bulk 85-83 8 ST-2043B Positive type; Carton of 1000; Rubber

VALVE SEATQTY YEARS DESCRIPTIONPART NO.Exh. 85-83 4 245-1562-1N Std Only Premium Material; 1.5675" OD, 1.3125" ID, .2160" DepthExh. 85-83 4 245-1562-1 Std Only 1.5675" OD, 1.3125" ID, .2160" DepthInt. 85-83 4 245-2000-1 Std Only 2.0055" OD, 1.7500" ID, .2160" Depth

VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 85-83 16 VK-144 1 groove; Square cut key grooveKeeper 85-83 16 VK-144R 1 groove; Square cut key groove; HardenedKeeper, Bulk 85-83 16 VK-144B 1 groove; Square cut key groove; Carton of 1000

VALVE

TRAIN

VALVE

TRAIN

PISTONQTY YEARS DESCRIPTIONPART NO.Cast Piston 85-83 4 525CP Std-20-30-40-60 Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD, .9310" Pin

Dia., Recessed Head .116" deep - 9.2:1 C.R.;DurOshield® skirt coated piston

Cast Piston 85-83 4 525P Std-10-20-30-40-60 Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD, .9310" PinDia., Recessed Head .116" deep - 9.2:1 C.R.

Cast Piston - Individual 85-83 4 W525CP Std-20-30-40-60 Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD, .9310" PinDia., Recessed Head .116" deep - 9.2:1 C.R.;DurOshield® skirt coated piston

Cast Piston - Individual 85-83 4 W525P Std-10-20-30-40-60 Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD, .9310" PinDia., Recessed Head .116" deep - 9.2:1 C.R.

RINGSQTY YEARS DESCRIPTIONPART NO.Premium Set 85-83 1 E-450K Std-20-30-40-60 2-5/64, 1-3/16Standard Set 85-83 1 E-450X Std-20-30-40-60 2-5/64, 1-3/16Premium Single Cylinder Set 85-83 4 WE-450K Std-20-30-40-60 2-5/64, 1-3/16Standard Single Cylinder Set 85-83 4 WE-450X Std-20-30-40-60 2-5/64, 1-3/16

ENGINE BEARINGSQTY YEARS DESCRIPTIONPART NO.Main Set 85-83 1 6676M Std-10-20-30Rod Set 85-83 1 4-3310CPA Std-10-20-30-40Rod Pair 85-83 4 3310CPA Std-1-2-10-20-30-

40-50-60Cam Set 85-83 1 1244M Std-10

OIL PUMPQTY YEARS DESCRIPTIONPART NO.Oil Pump 88-83 1 224-41198 Replaces pump w/cover having tab & slotted holePump Repair Kit 88-83 1 224-51198 Use w/pump having cover w/tab & slotted hole

GASKETSQTY YEARS DESCRIPTIONPART NO.Kit Gasket Set 85-83 1 260-1191 PermaDry® molded rubber valve cover gskt. incl.;

Premium valve stem seals incl.


BLOCK

BLOCK

RE-RING KITYEARS DESCRIPTION KIT NO.

PREMIUM ECONOMYKIT NO.

Re-ring85-83 205-858 205-358Re-ring w/Mains 205-858M 205-358M

PermaDry® molded rubber valve cover gskt. incl.;Premium valve stem seals incl.

OVERHAUL KITYEARS DESCRIPTION KIT NO.


Master85-83 MKP-858A MKP-358AMaster w/o Pistons MK-858A MK-358AMaster w/o Rods & Mains 505-858A 505-358A

Freeze plugs not incl.; PermaDry® molded rubber valvecover gskt. incl.; Premium valve stem seals incl.; Oilpump replaces pump w/cover having tab & slotted hole

KITS

KITS

2.5L 151 OHV L4 (Pontiac), 4" Bore (GMC Eng.) 1983-80VIN Code "B" 1980-83

4TIMINGQTY YEARS DESCRIPTIONPART NO.Gear Set 83-80 1 221-2542LS Laminated cam gear; 221-2520 not sold separately; Incl.

(1) 221-2537, (1) 221-2542Crank Gear 83-80 1 221-2537 27 Teeth

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Camshaft 83-80 1 CS-696Lifter 83-80 8 HT-969 Std Only Hyd.; w/.440" wide oil grooveLifter, Bulk 83-80 8 HT-969B Std Only Hyd.; Carton of 128


3

AMC2.5L 151 OHV L4 (Pontiac), 4" Bore (GMC Eng.) 1983-80

VIN Code "B" 1980-834

(cont.)

CAMSHAFT/LIFTER(cont.)QTY YEARS DESCRIPTIONPART NO.Prelube 83-80 1 55-400 4 oz. bottle; 1.5 oz. packet No. 55-403 also avail.

PUSH RODQTY YEARS DESCRIPTIONPART NO.Push Rod 83-82 8 RP-3211 8.9760" O.A.L.Push Rod, Bulk 83-82 8 BRP-3211 Carton of 100; 8.9760" O.A.L.

ROCKER PARTSQTY YEARS DESCRIPTIONPART NO.Arm Assy. 83-80 8 R-894 Incl. arm & 2-pivotsArm Assy., Bulk 83-80 8 R-894B Incl. arm & 2-pivots; Carton of 64Arm 83-80 8 R-894APivot Ball 83-80 8 MR-1832 Hole I.D. .4365"Pivot Ball 83-80 8 MR-1841 Hole I.D. .4745"Nut 83-80 8 MR-1934 3/8" x 24 UNFBolt 83-81 8 MR-1936

VALVEQTY YEARS DESCRIPTIONPART NO.Exhaust 83-80 4 V-2203 Std Only Chrome plated stem; 1.5000" Head Dia., .3422" Stem Dia.,

4.6200" O.A.L.Intake 83-80 4 V-2204 Std Only Chrome plated stem; 1.7200" Head Dia., .3422" Stem Dia.,

4.6690" O.A.L.

VALVE GUIDEQTY YEARS DESCRIPTIONPART NO.Guide 83-80 8 VG-5005 .3430" ID, 2.2500" O.A.L.Guide 83-80 8 VG-5005H Hardened; .3430" ID, 2.2500" O.A.L.Guide 83-80 8 VG-5005T Threaded; .3425" ID, 2.2500" O.A.L.Guide, Bulk 83-80 8 VG-5005B Carton of 50; .3430" ID, 2.2500" O.A.L.Guide, Bulk 83-80 8 VG-5005TB Threaded; Carton of 50; .3425" ID, 2.2500" O.A.L.

VALVE SPRINGQTY YEARS DESCRIPTIONPART NO.Spring 83-80 8 VS-521 Incl. damper; 2.1090" Free Height

VALVE SEALQTY YEARS DESCRIPTIONPART NO.Valve Stem Seal 83-80 8 ST-2001 Positive type; Installation requires valve guide machining;

Rubber/PTFEValve Stem Seal 83-80 8 MV-1233C O-Ring; RubberValve Stem Seal Bulk 83-80 8 MV-1233 O-Ring; Carton of 100; RubberValve Stem Seal Bulk 83-80 8 ST-2001BC Positive type; Installation requires valve guide machining;

Carton of 100; Rubber/PTFE

VALVE SEATQTY YEARS DESCRIPTIONPART NO.Exh. 83-80 4 245-1625-1N Std Only Premium Material; 1.6300" OD, 1.3750" ID, .2160" DepthExh. 83-80 4 245-1625-1 Std Only 1.6300" OD, 1.3750" ID, .2160" DepthInt. 83-80 4 245-1812-4N Std Only Premium Material; 1.8175" OD, 1.5625" ID, .2160" DepthInt. 83-80 4 245-1812-4 Std Only 1.8175" OD, 1.5625" ID, .2160" Depth

VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 83-80 16 VK-115 1 groove; Square cut key grooveKeeper 83-80 16 VK-115R 1 groove; Square cut key groove; HardenedKeeper, Bulk 83-80 16 VK-115B 1 groove; Square cut key groove; Carton of 1000Spring Insert 83-80 8 259-201B .030"; Carton of 100Spring Insert 83-80 8 259-201A .060"; Carton of 100Spring Insert 83-80 8 259-201ARS .060"; Carton of 500

VALVE

TRAIN

VALVE

TRAIN

PISTONQTY YEARS DESCRIPTIONPART NO.Cast Piston 83-82 4 H553CP Std-20-30-40-60 Use w/E-381K or E-381X ring set; Hypereutectic; 2-5/64",

1-3/16" Ring Groove, 1.570" CD, .9280" Pin Dia.,Recessed Head .220" deep x 3.070" dia. - 8.5:1 C.R.;DurOshield® skirt coated piston

Cast Piston 83-80 4 H547CP Std-20-30-40-60 Use w/E-384K or E-384X ring set; Hypereutectic; 1-1/16",1-5/64", 1-3/16" Ring Groove, 1.560" CD, .9275" Pin Dia.,Recessed Head .165" deep x 3.120" dia. w/shallow oil ringgroove for low tension oil ring - 9.0:1 C.R.; DurOshield®skirt coated piston

Cast Piston 83-80 4 H547P Std-20-30-40-60 Use w/E-384K or E-384X ring set; Hypereutectic; 1-1/16",1-5/64", 1-3/16" Ring Groove, 1.560" CD, .9275" Pin Dia.,Recessed Head .165" deep x 3.120" dia. w/shallow oil ringgroove for low tension oil ring - 9.0:1 C.R.

Cast Piston 81-80 4 465AP * Std-30-40-60 Use w/E-381K or E-381X ring set; Cast; 2-5/64", 1-3/16"Ring Groove, 1.570" CD, .9275" Pin Dia., Recessed Head.245" deep x 3.070" dia. - 8.2:1 C.R.

Cast Piston 81-80 4 465NP Std-30-40-60 Use w/E-381K or E-381X ring set; Cast; 2-5/64", 1-3/16"Ring Groove, 1.570" CD, .9275" Pin Dia., Recessed Head.245" deep x 3.070" dia. - 8.2:1 C.R.

Cast Piston 81-80 4 H553CP Std-20-30-40-60 Use w/E-381K or E-381X ring set; Hypereutectic; 2-5/64",1-3/16" Ring Groove, 1.570" CD, .9280" Pin Dia.,Recessed Head .220" deep x 3.070" dia. - 8.5:1 C.R.;DurOshield® skirt coated piston

BLOCK

BLOCK


* New Item — Check For Availability

4

AMC2.5L 151 OHV L4 (Pontiac), 4" Bore (GMC Eng.) 1983-80VIN Code "B" 1980-83

4(cont.)

PISTON (cont.)QTY YEARS DESCRIPTIONPART NO.Cast Piston - Individual 83-82 4 WH553CP Std-20-30-40-60 Use w/WE-381K or WE-381X ring set; Hypereutectic;

2-5/64", 1-3/16" Ring Groove, 1.570" CD, .9280" Pin Dia.,Recessed Head .220" deep x 3.070" dia. - 8.5:1 C.R.;DurOshield® skirt coated piston

Cast Piston - Individual 83-80 4 WH547CP Std-20-30-40-60 Use w/WE-384K or WE-384X ring set; Hypereutectic;1-1/16", 1-5/64", 1-3/16" Ring Groove, 1.560" CD, .9275"Pin Dia., Recessed Head .165" deep x 3.120" dia.w/shallow oil ring groove for low tension oil ring - 9.0:1C.R.; DurOshield® skirt coated piston

Cast Piston - Individual 83-80 4 WH547P Std-20-30-40-60 Use w/WE-384K ring set; Hypereutectic; 1-1/16", 1-5/64",1-3/16" Ring Groove, 1.560" CD, .9275" Pin Dia.,Recessed Head .165" deep x 3.120" dia. w/shallow oil ringgroove for low tension oil ring - 9.0:1 C.R.

Cast Piston - Individual 81-80 4 W465NP Std Only Use w/WE-381K or WE-381X ring set; Cast; 2-5/64",1-3/16" Ring Groove, 1.570" CD, .9275" Pin Dia.,Recessed Head .245" deep x 3.070" dia. - 8.2:1 C.R.

Cast Piston - Individual 81-80 4 WH553CP Std-20-30-40-60 Use w/WE-381K or WE-381X ring set; Hypereutectic;2-5/64", 1-3/16" Ring Groove, 1.570" CD, .9280" Pin Dia.,Recessed Head .220" deep x 3.070" dia. - 8.5:1 C.R.;DurOshield® skirt coated piston

Cast Piston Set w/Prem. Rings 83-80 1 4KH547CP60 60 Cast; 1-1/16", 1-5/64", 1-3/16" Ring Groove, 1.560" CD,.9275" Pin Dia., Recessed Head .165" deep x 3.120" dia.w/shallow oil ring groove for low tension oil ring - 9.0:1C.R.; DurOshield® skirt coated piston

RINGSQTY YEARS DESCRIPTIONPART NO.Premium Set 83-82 1 E-384K Std-20-30-40-60 1-1/16, 1-5/64, 1-3/16Premium Set 83-80 1 E-381K Std-20-30-40-60 Use w/H553CP or 465NP piston; 2-5/64, 1-3/16Standard Set 83-82 1 E-384X Std-20-30-40-60 1-1/16, 1-5/64, 1-3/16Standard Set 83-80 1 E-381X Std-20-30-40-60 Use w/H553CP or 465NP piston; 2-5/64, 1-3/16Premium Single Cylinder Set 83-82 4 WE-384K Std-20-30-40-60 1-1/16, 1-5/64, 1-3/16Premium Single Cylinder Set 83-80 4 WE-381K Std-20-30 Use w/WH553CP or W465NP piston; 2-5/64, 1-3/16Standard Single Cylinder Set 83-80 4 WE-381X Std-20-30-40 Use w/WH553CP or W465NP piston; 2-5/64, 1-3/16

SLEEVEQTY YEARS DESCRIPTIONPART NO.Repair Sleeve 83-80 4 SL-22Y Std Only 1/8" wall, must be cut to correct length; O.A.L. 10.250"Repair Sleeve 83-80 4 SL-22M Std Only 3/32" wall, must be cut to correct length; O.A.L. 10.250"

ENGINE BEARINGSQTY YEARS DESCRIPTIONPART NO.Main Set 83-80 1 6689MA Std-1-10-20-30 A-Series aluminum bearingsRod Set 83-80 1 4-2500RAA Std-1-10-20-30-

40A-Series aluminum bearings

Rod Set 83-80 1 4-2500RAA10X2 10X2-20X2-30X2

A-Series aluminum bearings; Use in .002" O/S Rod Bore

Rod Pair 83-80 4 2500RAA Std-1-2-10-20-30-40

A-Series aluminum bearings

Cam Set 83-80 1 1461M Std Only

OIL PUMPQTY YEARS DESCRIPTIONPART NO.Oil Pump 83-80 1 224-41239Oil Pump 83-80 1 224-41239V High Volume, check pan for clearanceInter. Shaft 83-80 1 224-61239Screen Assy. 83-80 1 224-11239

GASKETSQTY YEARS DESCRIPTIONPART NO.Kit Gasket Set 83-80 1 260-1128 Premium valve stem seals incl.


BLOCK

BLOCK



Re-ring83-82 205-714 205-214Incl. A-Series aluminum bearings; Premium valvestem seals incl.; For pistons w/1-1/16, 1-5/64, 1-3/16ring groove

3.0L 184 L-HEAD L6 (Nash), 3.125" Bore 19535SLEEVEQTY YEARS DESCRIPTIONPART NO.Repair Sleeve 53 6 SL-9M Std Only 3/32" wall, must be cut to correct length

3.2L 195.6 OHV L6 (AMC), 3.125" Bore 1965-58VIN Codes "B" 1960-65, "C" 1960-65

6TIMINGQTY YEARS DESCRIPTIONPART NO.Timing Chain 65-64 1 222-365 w/Cast iron block; 60 LinksTiming Chain 64-62 1 222-354 w/Alum. block; w/3/4" sprocket; Silent type; 1" wide chain;

56 Links(continued on next page)

5

AMC3.2L 195.6 OHV L6 (AMC), 3.125" Bore 1965-58

VIN Codes "B" 1960-65, "C" 1960-656

(cont.)

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Lifter 64-61 12 HT-2011 Std Only w/Alum. block; Hyd.Lifter, Bulk 64-61 12 HT-2011B Std Only w/Alum. block; Hyd.; Carton of 117

VALVE GUIDEQTY YEARS DESCRIPTIONPART NO.Guide 65-61 6 VG-5006 Exh.; w/Alum. block; .3440" ID, 2.3750" O.A.L.Guide 65-61 6 VG-5006T Exh.; w/Alum. block; Threaded; .3425" ID, 2.3800" O.A.L.Guide, Bulk 65-61 6 VG-5006B Exh.; w/Alum. block; Carton of 50; .3440" ID, 2.3750" O.A.L.


Rubber/PTFEValve Stem Seal 65-58 1 MV-1765 Umbrella type; Carton of 100; RubberValve Stem Seal Bulk 65-58 1 ST-2001BC Positive type; Installation requires valve guide machining;


VALVE SEATQTY YEARS DESCRIPTIONPART NO.Exh. 65-58 6 245-1437-3 Std Only w/Cast iron block; 1.4425" OD, 1.1880" ID, .2160" DepthExh. 65-58 6 245-1437-3N Std Only w/Cast Iron block; Premium Material; 1.4425" OD, 1.1880"

ID, .2160" DepthInt. 65-58 6 245-1625-1N Std Only Premium Material; 1.6300" OD, 1.3750" ID, .2160" DepthInt. 65-58 6 245-1625-1 Std Only 1.6300" OD, 1.3750" ID, .2160" Depth

VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 65-58 12 VK-115 Int.; 1 groove; Square cut key grooveKeeper 65-58 12 VK-115R Int.; 1 groove; Square cut key groove; HardenedKeeper, Bulk 65-58 12 VK-115B Int.; 1 groove; Square cut key groove; Carton of 1000

VALVE

TRAIN

VALVE

TRAIN

FREEZE PLUGSQTY YEARS DESCRIPTIONPART NO.Brass Block Plug Kit 65-58 1 381-8000 Incl. 6, 2" OD brass cup plugs for 4, 5, & 6 plug Engs.

3.2L 195.6 L-HEAD L6 (AMC), 3.125" Bore 1965-52VIN Code "A" 1960-65

7VALVE SEATQTY YEARS DESCRIPTIONPART NO.Exh. 65-52 6 245-1375-4 Std Only 1.3795" OD, 1.1250" ID, .1855" DepthInt. 65-52 6 245-1562-1N Std Only Premium Material; 1.5675" OD, 1.3125" ID, .2160" DepthInt. 65-52 6 245-1562-1 Std Only 1.5675" OD, 1.3125" ID, .2160" Depth

SLEEVEQTY YEARS DESCRIPTIONPART NO.Repair Sleeve 55-52 6 SL-9M Std Only 3/32" wall, must be cut to correct length

3.3L 199 OHV L6, 3.75" Bore 1970-65VIN Codes "A" 1966-70, "B" 1970, "E" 1966, "J" 1965-69, "P" 1968-69

8TIMINGQTY YEARS DESCRIPTIONPART NO.3 Piece Set 70-65 1 KT3-494S Incl. (1) 222-494, (1) 223-355, (1) 223-388Timing Chain 70-65 1 222-494 48 LinksCrank Sprocket 70-65 1 223-355 18 TeethCam Sprocket 70-65 1 223-388 36 Teeth

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Camshaft 70-65 1 CS-652Lifter 70-65 12 HT-2011 Std Only Hyd.Lifter, Bulk 70-65 12 HT-2011B Std Only Hyd.; Carton of 117Prelube 70-65 1 55-400 4 oz. bottle; 1.5 oz. packet No. 55-403 also avail.

CAM KITQTY YEARS DESCRIPTIONPART NO.Cam/Lifter Kit 70-65 1 KC-652 Hyd.; Incl. (1) CS-652, (12) HT-2011, (1) 55-403BCam/Lifter/Timing Kit 70-65 1 KCT-652 Hyd.; Incl. (1) CS-652, (12) HT-2011, (1) KT3-494S, (1)

55-403B

ROCKER PARTSQTY YEARS DESCRIPTIONPART NO.Arm 70-65 12 R-864 Cast iron

VALVEQTY YEARS DESCRIPTIONPART NO.Exhaust 70-65 6 V-2023 Std Only 4 groove; Chrome plated stem; 1.4060" Head Dia., .3720"

Stem Dia., 4.8920" O.A.L.Intake 70-65 6 V-1981 Std Only 4 groove; 1.7870" Head Dia., .3720" Stem Dia., 4.8990"

O.A.L.

VALVE GUIDEQTY YEARS DESCRIPTIONPART NO.Guide 70-65 12 VG-5062 .3735" ID, 2.3800" O.A.L.

VALVE SPRINGQTY YEARS DESCRIPTIONPART NO.Spring 70-65 12 VS-666 w/damper; 2.2600" Free Height


Rubber/PTFEValve Stem Seal Bulk 70-65 12 ST-2004BC Positive type; Installation requires valve guide machining;


VALVE

TRAIN

VALVE

TRAIN


6

AMC3.3L 199 OHV L6, 3.75" Bore 1970-65VIN Codes "A" 1966-70, "B" 1970, "E" 1966, "J" 1965-69, "P" 1968-69

8(cont.)


VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 70-65 24 VK-174 4 grooveKeeper 70-65 24 VK-174R 4 groove; HardenedSpring Insert 70-65 12 259-103C .015"; ID 1.030"; Carton of 100Spring Insert 70-65 12 259-103B .030"; ID 1.030"; Carton of 100Spring Insert 70-65 12 259-103BRS .030"; ID 1.030"; Carton of 500Spring Insert 70-65 12 259-103A .060"; ID 1.030"; Carton of 100Spring Insert 70-65 12 259-103ARS .060"; ID 1.030"; Carton of 500



ENGINE BEARINGSQTY YEARS DESCRIPTIONPART NO.Main Set 70-65 1 4289M Std-10-20-30-40-60Rod Set 70-65 1 6-3310CPA Std-1-10-20-30-

40-50-60Rod Pair 70-65 6 3310CPA Std-1-2-10-20-30-

40-50-60Cam Set 70-65 1 1244M Std-10

OIL PUMPQTY YEARS DESCRIPTIONPART NO.Oil Pump 70-65 1 224-41199 Replaces pump w/o cover having tab & slotted hole



BLOCK

BLOCK





3.8L 232 OHV L6 (Hi Torque), 3.75" Bore 1979-64VIN Codes "B" 1966-69, "C" 1968-69, "E" 1967-79, "F" 1966-71, "G" 1966-71, "L" 1964-68, "M" 1966-67& 1969, "P" 1967-69, "Q" 1970-71, "S" 1965-67, "T" 1967, "V" 1966, "W" 1965

9

TIMINGQTY YEARS DESCRIPTIONPART NO.3 Piece Set 79-64 1 KT3-494S Incl. (1) 222-494, (1) 223-355, (1) 223-388Timing Chain 79-64 1 222-494 48 LinksCrank Sprocket 79-64 1 223-355 18 TeethCam Sprocket 79-64 1 223-388 36 Teeth

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Camshaft 79-76 1 CS-652 VIN Code "E"Camshaft 75-64 1 CS-652Lifter 79-66 12 HT-2011 Std Only Hyd.Lifter, Bulk 79-66 12 HT-2011B Std Only Hyd.; Carton of 117Prelube 79-64 1 55-400 4 oz. bottle; 1.5 oz. packet No. 55-403 also avail.

CAM KITQTY YEARS DESCRIPTIONPART NO.Cam/Lifter Kit 79-76 1 KC-652 VIN Code "E"; Hyd.; Incl. (1) CS-652, (12) HT-2011, (1)

55-403BCam/Lifter Kit 75-66 1 KC-652 Hyd.; Incl. (1) CS-652, (12) HT-2011, (1) 55-403BCam/Lifter/Timing Kit 79-76 1 KCT-652 VIN Code "E"; Hyd.; Incl. (1) CS-652, (12) HT-2011, (1)

KT3-494S, (1) 55-403BCam/Lifter/Timing Kit 75-66 1 KCT-652 Hyd.; Incl. (1) CS-652, (12) HT-2011, (1) KT3-494S, (1)

55-403B

PUSH RODQTY YEARS DESCRIPTIONPART NO.Push Rod 79-75 12 RP-3171 9.5940" O.A.L.Push Rod 74-72 12 RP-3171 w/o rocker arm shaft; 9.5940" O.A.L.Push Rod 74-72 12 RP-3163 w/rocker arm shaft; 9.6560" O.A.L.Push Rod 71-68 12 RP-3163 9.6560" O.A.L.

ROCKER PARTSQTY YEARS DESCRIPTIONPART NO.Arm Assy. 79-72 12 R-905 w/o rocker arm shaft; Incl. 2-arms, 2-pivots & 1-bridge;

Stamped rocker arm

VALVE

TRAIN

VALVE

TRAIN


7

AMC3.8L 232 OHV L6 (Hi Torque), 3.75" Bore 1979-64

VIN Codes "B" 1966-69, "C" 1968-69, "E" 1967-79, "F" 1966-71, "G" 1966-71, "L" 1964-68, "M" 1966-67& 1969, "P" 1967-69, "Q" 1970-71, "S" 1965-67, "T" 1967, "V" 1966, "W" 1965

9(cont.)

ROCKER PARTS (cont.)QTY YEARS DESCRIPTIONPART NO.Arm Assy., Bulk 79-72 12 R-905B w/o rocker arm shaft; Incl. 2-arms, 2-pivots & 1-bridge;

Stamped rocker arm; Carton of 32Arm 79-75 12 R-905A Stamped rocker armArm 74-72 12 R-905A w/o rocker arm shaft; Stamped rocker armArm 74-72 12 R-864 w/rocker arm shaft; Cast ironArm 71-64 12 R-864 Cast ironPivot 79-75 6 MR-1909 Incl. 2-pivots & 1-bridgePivot 74-72 6 MR-1909 w/o rocker arm shaft; Incl. 2-pivots & 1-bridge

VALVEQTY YEARS DESCRIPTIONPART NO.Exhaust 79-74 6 V-2023 Std Only w/o Rotators; 4 groove; Chrome plated stem; 1.4060" Head

Dia., .3720" Stem Dia., 4.8920" O.A.L.Exhaust 73-64 6 V-2023 Std Only 4 groove; Chrome plated stem; 1.4060" Head Dia., .3720"


O.A.L.


VALVE SPRINGQTY YEARS DESCRIPTIONPART NO.Spring 79-78 12 VS-743 1.9900" Free HeightSpring 77 12 VS-666 w/o Rotators; w/damper; 2.2600" Free HeightSpring 77 12 VS-743 w/Rotators; 1.9900" Free HeightSpring 76 12 VS-743 1.9900" Free HeightSpring 75 12 VS-666 w/damper; 2.2600" Free HeightSpring 74 12 VS-666 w/o Rotators; w/damper; 2.2600" Free HeightSpring 73-64 12 VS-666 w/damper; 2.2600" Free Height





VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 79-73 24 VK-115 1 groove; Square cut key grooveKeeper 79-73 24 VK-115R 1 groove; Square cut key groove; HardenedKeeper 79-73 24 VK-174 4 grooveKeeper 79-73 24 VK-174R 4 groove; HardenedKeeper 72-64 24 VK-138 1 groove; Square cut key grooveKeeper 72-64 24 VK-138R 1 groove; Square cut key groove; HardenedKeeper 72-64 24 VK-174 4 grooveKeeper 72-64 24 VK-174R 4 groove; HardenedKeeper, Bulk 79-73 24 VK-115B 1 groove; Square cut key groove; Carton of 1000Keeper, Bulk 72-64 24 VK-138B 1 groove; Square cut key groove; Carton of 1000Spring Insert 79-64 12 259-103C .015"; ID 1.030"; Carton of 100Spring Insert 79-64 12 259-103B .030"; ID 1.030"; Carton of 100Spring Insert 79-64 12 259-103BRS .030"; ID 1.030"; Carton of 500Spring Insert 79-64 12 259-103A .060"; ID 1.030"; Carton of 100Spring Insert 79-64 12 259-103ARS .060"; ID 1.030"; Carton of 500

VALVE

TRAIN

VALVE

TRAIN

PISTONQTY YEARS DESCRIPTIONPART NO.Cast Piston 79-77 6 456NP Std-30-40-60 8.0:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD,

.9313" Pin Dia., "D" Shaped Recessed Head .126" deepCast Piston 79-77 6 456P Std-30-40-60 8.0:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .126" deepCast Piston 76-68 6 409P Std-20-30-40-60 8.0:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .108" deep x 3.125" dia.Cast Piston 67-64 6 409P Std-20-30-40-60 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .108" deep x 3.125" dia.Cast Piston - Individual 79-77 6 W456NP * Std Only 8.0:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD,

.9313" Pin Dia., "D" Shaped Recessed Head .126" deepCast Piston - Individual 79-77 6 W456P Std-40-60 8.0:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .126" deepCast Piston - Individual 76-68 6 W409P Std-20-30-40-60 8.0:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .108" deep x 3.125" dia.Cast Piston - Individual 67-64 6 W409P Std-20-30-40-60 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .108" deep x 3.125" dia.

BLOCK

BLOCK



8

AMC3.8L 232 OHV L6 (Hi Torque), 3.75" Bore 1979-64VIN Codes "B" 1966-69, "C" 1968-69, "E" 1967-79, "F" 1966-71, "G" 1966-71, "L" 1964-68, "M" 1966-67& 1969, "P" 1967-69, "Q" 1970-71, "S" 1965-67, "T" 1967, "V" 1966, "W" 1965

9(cont.)




40-50-60Rod Pair 79-64 6 3310CPA Std-1-2-10-20-30-

40-50-60Cam Set 79-64 1 1244M Std-10

OIL PUMPQTY YEARS DESCRIPTIONPART NO.Oil Pump 79-67 1 224-43428 Incl. pump & screenOil Pump 79-64 1 224-41199 Replaces pump w/o cover having tab & slotted hole



BLOCK

BLOCK





4.1L 250 OHV V8 (AMC), 3.5" Bore 1959-5610TIMINGQTY YEARS DESCRIPTIONPART NO.Timing Chain 59-56 1 222-349 5/8" wide; 62 LinksCrank Sprocket 59-56 1 223-281 Use w/5/8" wide chain; 23 Teeth

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Lifter 59-57 16 AT-937 Std Only Barrel shaped mech.Lifter 59-57 16 AT-2084 Std Only Dumbbell shaped mech.Lifter 57-56 16 HT-879 Std Only Exc. Hudson; Hyd.Lifter, Bulk 59-57 16 AT-937B Std Only Barrel shaped mech.; Carton of 117Lifter, Bulk 59-57 16 AT-2084B Std Only Dumbbell shaped mech.; Carton of 117

VALVEQTY YEARS DESCRIPTIONPART NO.Exhaust 59 8 V-2023 Std Only 4 groove; Chrome plated stem; 1.4060" Head Dia., .3720"

Stem Dia., 4.8920" O.A.L.Intake 59 8 V-1981 Std Only 4 groove; 1.7870" Head Dia., .3720" Stem Dia., 4.8990"

O.A.L.


VALVE SEALQTY YEARS DESCRIPTIONPART NO.Valve Stem Seal 59 16 ST-2004 Positive type; Installation requires valve guide machining;

Rubber/PTFEValve Stem Seal 58-56 16 ST-2001 Positive type; Installation requires valve guide machining;

Rubber/PTFEValve Stem Seal 59 16 MV-1796C Umbrella type; Fits Std. to .015" O/S valve stem; RubberValve Stem Seal Bulk 59 16 ST-2004BC Positive type; Installation requires valve guide machining;

Carton of 100; Rubber/PTFEValve Stem Seal Bulk 59 16 MV-1796 Umbrella type; Fits Std. to .015" O/S valve stem; Carton of

100; RubberValve Stem Seal Bulk 58-56 16 ST-2001BC Positive type; Installation requires valve guide machining;



VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 59 32 VK-174 4 grooveKeeper 59 32 VK-174R 4 groove; HardenedKeeper 58-56 32 VK-115 1 groove; Square cut key grooveKeeper 58-56 32 VK-115R 1 groove; Square cut key groove; HardenedKeeper, Bulk 58-56 32 VK-115B 1 groove; Square cut key groove; Carton of 1000

VALVE

TRAIN

VALVE

TRAIN


9

AMC4.1L 250 OHV V8 (AMC), 3.5" Bore 1959-56 10

(cont.)

RINGSQTY YEARS DESCRIPTIONPART NO.Premium Set 59-56 1 E-236K Std-30 2-5/64, 1-3/16Standard Set 59-56 1 E-236X Std-30-40 2-5/64, 1-3/16Premium Single Cylinder Set 59-56 8 WE-236K Std-30 2-5/64, 1-3/16Standard Single Cylinder Set 59-56 8 WE-236X Std-30-40 2-5/64, 1-3/16

SLEEVEQTY YEARS DESCRIPTIONPART NO.Repair Sleeve 59-56 1 SL-15M Std Only 3/32" wall, Must be cut to correct length

ENGINE BEARINGSQTY YEARS DESCRIPTIONPART NO.Main Set 59-56 1 4010M Std-10-20Rod Pair 59-56 8 2230CP Std-10-20

BLOCK

BLOCK

4.2L 258 OHV L6, 3.75" Bore 1988-71VIN Codes "A" 1971-79, "B" 1971, "C" 1976-88

11TIMINGQTY YEARS DESCRIPTIONPART NO.3 Piece Set 88-82 1 KT3-504S Incl. (1) 222-504, (1) 223-355, (1) 223-3883 Piece Set 81-71 1 KT3-494S Incl. (1) 222-494, (1) 223-355, (1) 223-388Timing Chain 88-82 1 222-504 48 LinksTiming Chain 81-71 1 222-494 48 LinksCrank Sprocket 88-71 1 223-355 18 TeethCam Sprocket 88-71 1 223-388 36 Teeth

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Camshaft 88-81 1 CS-713Camshaft 80-79 1 CS-652 VIN Code "A"Camshaft 80-79 1 CS-652 VIN Code "C"; w/M/TCamshaft 78-76 1 CS-652 VIN Code "A"Camshaft 75-71 1 CS-652Lifter 88-71 12 HT-2011 Std Only Hyd.Lifter, Bulk 88-71 12 HT-2011B Std Only Hyd.; Carton of 117Prelube 88-71 1 55-400 4 oz. bottle; 1.5 oz. packet No. 55-403 also avail.

CAM KITQTY YEARS DESCRIPTIONPART NO.Cam/Lifter Kit 88-81 1 KC-713 Hyd.; Incl. (1) CS-713, (12) HT-2011, (1) 55-403BCam/Lifter Kit 80-79 1 KC-652 VIN Code "A"; Hyd.; Incl. (1) CS-652, (12) HT-2011, (1)

55-403BCam/Lifter Kit 80-79 1 KC-652 VIN Code "C"; w/M/T; Hyd.; Incl. (1) CS-652, (12) HT-2011,

(1) 55-403BCam/Lifter Kit 78-76 1 KC-652 VIN Code "A"; Hyd.; Incl. (1) CS-652, (12) HT-2011, (1)

55-403BCam/Lifter Kit 75-71 1 KC-652 Hyd.; Incl. (1) CS-652, (12) HT-2011, (1) 55-403BCam/Lifter/Timing Kit 88-82 1 KCT-713A Hyd.; Incl. (1) CS-713, (12) HT-2011, (1) KT3-504S, (1)

55-403BCam/Lifter/Timing Kit 81 1 KCT-713 Hyd.; Incl. (1) CS-713, (12) HT-2011, (1) KT3-494S, (1)

55-403BCam/Lifter/Timing Kit 80-79 1 KCT-652 VIN Code "A"; Hyd.; Incl. (1) CS-652, (12) HT-2011, (1)

KT3-494S, (1) 55-403BCam/Lifter/Timing Kit 80-79 1 KCT-652 VIN Code "C"; w/M/T; Hyd.; Incl. (1) CS-652, (12) HT-2011,

(1) KT3-494S, (1) 55-403BCam/Lifter/Timing Kit 78-76 1 KCT-652 VIN Code "A"; Hyd.; Incl. (1) CS-652, (12) HT-2011, (1)

KT3-494S, (1) 55-403BCam/Lifter/Timing Kit 75-71 1 KCT-652 Hyd.; Incl. (1) CS-652, (12) HT-2011, (1) KT3-494S, (1)

55-403B

PUSH RODQTY YEARS DESCRIPTIONPART NO.Push Rod 88-81 12 RP-3180 9.6800" O.A.L.Push Rod 80-75 12 RP-3171 9.5940" O.A.L.Push Rod 74-72 12 RP-3171 w/o rocker arm shaft; 9.5940" O.A.L.Push Rod 74-72 12 RP-3163 w/rocker arm shaft; 9.6560" O.A.L.Push Rod 71 12 RP-3163 9.6560" O.A.L.Push Rod, Bulk 88-81 12 BRP-3180 Carton of 100; 9.6800" O.A.L.

ROCKER PARTSQTY YEARS DESCRIPTIONPART NO.Arm Assy. 88-75 6 R-905 Incl. 2-arms, 2-pivots & 1-bridge; Stamped rocker armArm Assy. 74-72 6 R-905 w/o rocker arm shaft; Incl. 2-arms, 2-pivots & 1-bridge;

Stamped rocker armArm Assy., Bulk 88-75 6 R-905B Incl. 2-arms, 2-pivots & 1-bridge; Stamped rocker arm;

Carton of 32Arm Assy., Bulk 74-72 6 R-905B w/o rocker arm shaft; Incl. 2-arms, 2-pivots & 1-bridge;

Stamped rocker arm; Carton of 32Arm 88-75 12 R-905A Stamped rocker armArm 74-72 12 R-905A w/o rocker arm shaft; Stamped rocker armArm 74-72 12 R-864 w/rocker arm shaft; Cast ironArm 71 12 R-864 Cast ironBridge 88-72 6 MR-1840Pivot 88-75 6 MR-1909 Incl. 2-pivots & 1-bridge

VALVE

TRAIN

VALVE

TRAIN


10

AMC4.2L 258 OHV L6, 3.75" Bore 1988-71VIN Codes "A" 1971-79, "B" 1971, "C" 1976-88

11(cont.)

ROCKER PARTS (cont.)QTY YEARS DESCRIPTIONPART NO.Pivot 88-75 12 MR-1839 Pivot onlyPivot 74-72 6 MR-1909 w/o rocker arm shaft; Incl. 2-pivots & 1-bridgePivot 74-72 12 MR-1839 w/o rocker arm shaft; Pivot only


Stem Dia., 4.8920" O.A.L.Exhaust 80-74 6 V-2023 Std Only w/o Rotators; 4 groove; Chrome plated stem; 1.4060" Head

Dia., .3720" Stem Dia., 4.8920" O.A.L.Exhaust 73-71 6 V-2023 Std Only 4 groove; Chrome plated stem; 1.4060" Head Dia., .3720"

Stem Dia., 4.8920" O.A.L.Intake 88-81 6 V-2206 Std Only 1 groove; Chrome plated stem; 1.7870" Head Dia., .3720"


O.A.L.Intake 73-71 6 V-1981 Std Only 4 groove; 1.7870" Head Dia., .3720" Stem Dia., 4.8990"

O.A.L.


VALVE SPRINGQTY YEARS DESCRIPTIONPART NO.Spring 88-78 12 VS-743 1.9900" Free HeightSpring 77 12 VS-666 w/o Rotators; w/damper; 2.2600" Free HeightSpring 77 12 VS-743 w/Rotators; 1.9900" Free HeightSpring 76 12 VS-743 1.9900" Free HeightSpring 75 12 VS-666 w/damper; 2.2600" Free HeightSpring 74 12 VS-666 w/o Rotators; w/damper; 2.2600" Free HeightSpring 73-71 12 VS-666 w/damper; 2.2600" Free Height





VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 88-81 12 VK-138 1 groove; Square cut key grooveKeeper 88-81 12 VK-138R 1 groove; Square cut key groove; HardenedKeeper 80-75 12 VK-174 4 grooveKeeper 80-75 12 VK-174R 4 groove; HardenedKeeper 74-73 12 VK-115 1 groove; Square cut key grooveKeeper 74-73 12 VK-115R 1 groove; Square cut key groove; HardenedKeeper 74-73 24 VK-174 4 grooveKeeper 74-73 24 VK-174R 4 groove; HardenedKeeper 72-71 24 VK-138 1 groove; Square cut key grooveKeeper 72-71 24 VK-138R 1 groove; Square cut key groove; HardenedKeeper 72-71 24 VK-174 4 grooveKeeper 72-71 24 VK-174R 4 groove; HardenedKeeper, Bulk 88-81 12 VK-138B 1 groove; Square cut key groove; Carton of 1000Keeper, Bulk 74-73 12 VK-115B 1 groove; Square cut key groove; Carton of 1000Keeper, Bulk 72-71 24 VK-138B 1 groove; Square cut key groove; Carton of 1000Spring Insert 88-71 12 259-103C .015"; ID 1.030"; Carton of 100Spring Insert 88-71 12 259-103B .030"; ID 1.030"; Carton of 100Spring Insert 88-71 12 259-103BRS .030"; ID 1.030"; Carton of 500Spring Insert 88-71 12 259-103A .060"; ID 1.030"; Carton of 100Spring Insert 88-71 12 259-103ARS .060"; ID 1.030"; Carton of 500

VALVE

TRAIN

VALVE

TRAIN

PISTONQTY YEARS DESCRIPTIONPART NO.Cast Piston 88-80 6 470NP Std-20-30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"

CD, .9310" Pin Dia., Recessed Head .178" deep - 8.2:1C.R.

Cast Piston 88-80 6 470AP Std-20-30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"CD, .9313" Pin Dia., "D" Shaped Recessed Head .178"deep

Cast Piston 79 6 470NP Std-20-30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"CD, .9310" Pin Dia., Recessed Head .178" deep - 8.2:1C.R.

Cast Piston 79 6 470AP Std-20-30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"CD, .9313" Pin Dia., "D" Shaped Recessed Head .178"deep

BLOCK

BLOCK


11

AMC4.2L 258 OHV L6, 3.75" Bore 1988-71

VIN Codes "A" 1971-79, "B" 1971, "C" 1976-8811

(cont.)

PISTON (cont.)QTY YEARS DESCRIPTIONPART NO.Cast Piston 79 6 456NP Std-30-40-60 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD,

.9313" Pin Dia., "D" Shaped Recessed Head .126" deepCast Piston 79 6 456P Std-30-40-60 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .126" deepCast Piston 78-77 6 456NP Std-30-40-60 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD,

.9313" Pin Dia., "D" Shaped Recessed Head .126" deepCast Piston 78-77 6 456P Std-30-40-60 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .126" deepCast Piston 76-71 6 409P Std-20-30-40-60 8.0:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,

.9310" Pin Dia., Recessed Head .108" deep x 3.125" dia.Cast Piston - Individual 88-80 6 W470NP Std-30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"

CD, .9310" Pin Dia., Recessed Head .178" deep - 8.2:1C.R.

Cast Piston - Individual 88-80 6 W470AP * Std-30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"CD, .9313" Pin Dia., "D" Shaped Recessed Head .178"deep

Cast Piston - Individual 79 6 W470NP Std-30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"CD, .9310" Pin Dia., Recessed Head .178" deep - 8.2:1C.R.

Cast Piston - Individual 79 6 W470AP * Std-30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"CD, .9313" Pin Dia., "D" Shaped Recessed Head .178"deep

Cast Piston - Individual 79 6 W456NP * Std Only 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD,.9313" Pin Dia., "D" Shaped Recessed Head .126" deep

Cast Piston - Individual 79 6 W456P Std-40-60 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,.9310" Pin Dia., Recessed Head .126" deep

Cast Piston - Individual 78-77 6 W456NP * Std Only 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.580" CD,.9313" Pin Dia., "D" Shaped Recessed Head .126" deep

Cast Piston - Individual 78-77 6 W456P Std-40-60 8.3:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,.9310" Pin Dia., Recessed Head .126" deep

Cast Piston - Individual 76-71 6 W409P Std-20-30-40-60 8.0:1 C.R.; Cast; 2-5/64", 1-3/16" Ring Groove, 1.581" CD,.9310" Pin Dia., Recessed Head .108" deep x 3.125" dia.

Cast Piston Set w/Prem. Rings 88-80 1 6K470NP30 30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"CD, .9310" Pin Dia., Recessed Head .178" deep - 8.2:1C.R.

Cast Piston Set w/Prem. Rings 79 1 6K470NP30 30-40-60 VIN Code "C"; Cast; 2-5/64", 1-3/16" Ring Groove, 1.633"CD, .9310" Pin Dia., Recessed Head .178" deep - 8.2:1C.R.




40-50-60Rod Pair 88-71 6 3310CPA Std-1-2-10-20-30-

40-50-60Cam Set 88-71 1 1244M Std-10

OIL PUMPQTY YEARS DESCRIPTIONPART NO.Oil Pump 88-83 1 224-41198 Replaces pump w/cover having tab & slotted holeOil Pump 82-80 1 224-43428 Exc. Eagle; Incl. pump & screenOil Pump 82-71 1 224-41199 Replaces pump w/o cover having tab & slotted holeOil Pump 79-71 1 224-43428 Incl. pump & screenPump Repair Kit 88-83 1 224-51198 Use w/pump having cover w/tab & slotted hole

GASKETSQTY YEARS DESCRIPTIONPART NO.Kit Gasket Set 88-86 1 260-1193 Gskts. for Alum. valve covers incl.; Gskts. for Plastic valve

covers incl.; Premium valve stem seals incl.Kit Gasket Set 85-81 1 260-1134 Premium valve stem seals incl.Kit Gasket Set 80-71 1 260-1007 Premium valve stem seals incl.


BLOCK

BLOCK




Gskts. for Alum. valve covers incl.; Gskts. for Plasticvalve covers incl.; Premium valve stem seals incl.



12

AMC4.2L 258 OHV L6, 3.75" Bore 1988-71VIN Codes "A" 1971-79, "B" 1971, "C" 1976-88

11(cont.)

RE-RING KIT (cont.)YEARS DESCRIPTION KIT NO.






OVERHAUL KITYEARS DESCRIPTION KIT NO.


Block88-86 BK-6197 -----VIN Code "C"; Gskts. for Alum. & Plastic valve coversincl.; Premium valve stem seals incl.

Block w/Pump & Freeze Plugs88-86 BKP-6197 -----VIN Code "C"; Gskts. for Alum. & Plastic valve coversincl.; Premium valve stem seals incl.; Oil pumpreplaces pump w/cover having tab & slotted hole; Incl.6, 2" OD brass cup plugs for 4, 5, & 6 plug Engs.

Master w/o Pistons88-86 MK-860C MK-360CGskts. for Alum. valve covers incl.; Gskts. for Plasticvalve covers incl.; Premium valve stem seals incl.; Oilpump replaces pump w/cover having tab & slotted hole;Incl. 6, 2" OD brass cup plugs for 4, 5, & 6 plug Engs.

Master88-86 MKP-860C MKP-360CVIN Code "C"; Gskts. for Alum. valve covers incl.; Gskts.for Plastic valve covers incl.; Premium valve stem sealsincl.; Oil pump replaces pump w/cover having tab &slotted hole; Incl. 6, 2" OD brass cup plugs for 4, 5, & 6plug Engs.

KITS

KITS

4.7L 287 OHV V8, 3.75" Bore 1966-63VIN Codes "H" 1966, "N" 1966, "T" 1966

12TIMINGQTY YEARS DESCRIPTIONPART NO.Timing Chain 66-65 1 222-349 5/8" wide; 62 LinksCrank Sprocket 66-65 1 223-281 Use w/5/8" wide chain; 23 Teeth

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Lifter 66-63 16 HT-2011 Std Only Hyd.Lifter, Bulk 66-63 16 HT-2011B Std Only Hyd.; Carton of 117

PUSH RODQTY YEARS DESCRIPTIONPART NO.Push Rod 66-63 16 RP-3083 8.6870" O.A.L.



O.A.L.


VALVE SEALQTY YEARS DESCRIPTIONPART NO.Valve Stem Seal 66-63 16 ST-2011 No tools req’d.; Positive type; Rubber/PTFEValve Stem Seal Bulk 66-63 16 ST-2011BC No tools req’d.; Positve type; Carton of 100; Rubber/PTFE


VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 66-63 32 VK-138 1 groove; Square cut key grooveKeeper 66-63 32 VK-138R 1 groove; Square cut key groove; HardenedKeeper 66-63 32 VK-174 4 grooveKeeper 66-63 32 VK-174R 4 groove; HardenedKeeper, Bulk 66-63 32 VK-138B 1 groove; Square cut key groove; Carton of 1000

VALVE

TRAIN

VALVE

TRAIN

RINGSQTY YEARS DESCRIPTIONPART NO.Premium Set 66-63 1 E-240K Std-20-30-40-60 2-5/64, 1-3/16Standard Set 66-63 1 E-240X Std-30-40-60 2-5/64, 1-3/16Premium Single Cylinder Set 66-63 8 WE-240K Std-20-30-40-60 2-5/64, 1-3/16Standard Single Cylinder Set 66-63 8 WE-240X Std-30-40-60 2-5/64, 1-3/16


ENGINE BEARINGSQTY YEARS DESCRIPTIONPART NO.Main Set 66-63 1 4010M Std-10-20Rod Pair 66-63 8 2230CP Std-10-20

BLOCK

BLOCK

13

AMC4.7L 290 OHV V8, 3.75" Bore 1969-66

VIN Codes "C" 1966-67, "D" 1966-67, "H" 1966-69, "M" 1968-69, "N" 1966-69, "U" 196713

TIMINGQTY YEARS DESCRIPTIONPART NO.3 Piece Set 69-66 1 KT3-349S 5/8" wide sprocket teeth; Incl. (1) 222-349, (1) 223-281, (1)

223-412Timing Chain 69-66 1 222-349 5/8" wide; 62 LinksCrank Sprocket 69-66 1 223-281 Use w/5/8" wide chain; 23 TeethCam Sprocket 69-66 1 223-412 Use w/5/8" wide chain; 46 Teeth

CAMSHAFT/LIFTERQTY YEARS DESCRIPTIONPART NO.Camshaft 69-66 1 CS-646Performance Cam 69-66 1 CS-1026R Pro-2000 Perf. Cam; Hyd.; Duration at .050: 204 Int., 214

Exh.; Valve lift .4480" Int., .4720" Exh.; Lobe Separation110 Degrees

Lifter 69-66 16 HT-2011 Std Only Hyd.Lifter 69-66 16 HT-2011R Std Only Hyd. Hi-RevLifter, Bulk 69-66 16 HT-2011B Std Only Hyd.; Carton of 117Prelube 69-66 1 55-400 4 oz. bottle; 1.5 oz. packet No. 55-403 also avail.

CAM KITQTY YEARS DESCRIPTIONPART NO.Cam/Lifter Kit 69-66 1 KC-646 Hyd.; Incl. (1) CS-646, (16) HT-2011, (1) 55-403BCam/Lifter Kit 69-66 1 KC-1026R Hyd.; Pro-2000 Perf. Cam; Duration at .050", 204 Int., 214

Exh.; Valve lift .448" Int., .472" Exh.; Lobe Separation 110Degrees; Incl. (1) CS-1026R, (16) HT-2011, (1) 55-403B

Cam/Lifter/Timing Kit 69-66 1 KCT-646 Hyd.; Incl. timing set w/5/8" wide timing teeth; Incl. (1)CS-646, (16) HT-2011, (1) KT3-349S, (1) 55-403B

ROCKER PARTSQTY YEARS DESCRIPTIONPART NO.Arm Assy. 69-66 16 R-853 Incl. arm, ball & nutArm 69-66 16 R-853A



O.A.L.


VALVE SPRINGQTY YEARS DESCRIPTIONPART NO.Spring 69-66 16 VS-703 2.0560" Free HeightSpring, Bulk 69-66 16 VS-703B Carton of 250; 2.0560" Free Height

VALVE SEALQTY YEARS DESCRIPTIONPART NO.Valve Stem Seal 69-66 16 ST-2002 Installation requires valve guide machining; PolyacrylateValve Stem Seal Bulk 69-66 16 ST-2002BC Positive type; Installation requires valve guide machining;

Carton of 100; Polyacrylate


VALVE, MISCQTY YEARS DESCRIPTIONPART NO.Keeper 69-66 32 VK-138 1 groove; Square cut key grooveKeeper 69-66 32 VK-138R 1 groove; Square cut key groove; HardenedKeeper 69-66 32 VK-174 4

Documents

857 6 - drivcat.com · • Place your Engine Express order as late as 8:00 p.m. Eastern and receive the engine kit the next day. Phone orders only. • Engine Express kits will be