1
8814 CharGuard™ Non woven liner Neoprene spray DESCRIPTION Fully coated Slip-on designed gauntlet Textured finish Without special treatment Cut and sewn Approved for food handling BENEFITS A comfortable, supple glove providing effective protection against abrasion and with a very good grip Protects the hand against hot temperatures Impermeable for working in damp or greasy environments Easy to put on and remove Surface provides better grip Lower allergy risks Wrist well protected Low-soil colour AVAILABLE SIZES 7/S • 8/M • 9/L • 10/XL WELTING COLOUR CORRESPONDS TO SIZE White 7/S • Blue 8/M • Red 9/L • Black 10/XL LENGTH Dependent on size, in mm (flat) 355 PACKAGING Pairs or pieces per pack/box 12/72 COLOUR OF SUPPORT/COATING Black RECOMMENDATIONS FOR USE Store away from light and humidity Cleaning: The gloves can be laundered between 40 - 60°C max. However, the customer or launderer is responsible for the performance of the gloves after laundering. Best cannot be held liable for this. Do not wear gloves when there is a risk of entanglement by moving parts of machines. Gloves must not come in contact with an open flame. Potential allergens: carbamate [ Updated 01/02/2010 ] RECOMMENDED FOR THESE RISKS: Heat & cold Abrasion Slips Slips RECOMMENDED FOR THESE LINES OF WORK: RECOMMENDED FOR THESE LINES OF WORK: Metallurgical industry Metallurgical industry Food industry Food industry EC compliance certificate delivered by the notified body 0321 SATRA House - Rockingham Road, Kettering - Northampshire NN16 9JH - United Kingdom The descriptions, characteristics, applications and photos are given for information purposes and do not constitute a contractual commitment. The manufacturer reserves the right to make any modifications it deems necessary. Cat. II EN388 - 2003 3232 ABRASION 0 1 2 3 4 TEARING 0 1 2 3 4 CUTTING 0 1 2 3 4 5 PUNCTURE 0 1 2 3 4 EN 407 - 2004 X2XXXX FLAMMABILITY X 1 2 3 4 CONVECTIVE HEAT X 1 2 3 4 SMALL SPLASHES OF MOLTEN METAL X 1 2 3 4 CONTACT HEAT 0 1 2 3 4 RADIANT HEAT X 1 2 3 4 LARGE SPLASHES OF MOLTEN METAL X 1 2 3 4 Heat protection up to 260°C Globus Building 38 Wheel Forge Way Trafford Park, Manchester M17 1EH Tel: 0161 877 4747 Fax: 0161 877 4746 www.globus.co.uk

8814 CharGuard™ - Showa Gloves8814 CharGuard™ Non woven liner Neoprene spray DESCRIPTION •Fully coated •Slip-on designed gauntlet •Textured finish •Without special treatment

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 8814 CharGuard™ - Showa Gloves8814 CharGuard™ Non woven liner Neoprene spray DESCRIPTION •Fully coated •Slip-on designed gauntlet •Textured finish •Without special treatment

8814 CharGuard™Non woven linerNeoprene spray

DESCRIPTION• Fully coated• Slip-on designed gauntlet• Textured finish• Without special treatment• Cut and sewn• Approved for food handling

BENEFITS• A comfortable, supple glove providing effective protection

against abrasion and with a very good grip• Protects the hand against hot temperatures• Impermeable for working in damp or greasy environments• Easy to put on and remove• Surface provides better grip• Lower allergy risks• Wrist well protected• Low-soil colour

AVAILABLE SIZES 7/S • 8/M • 9/L • 10/XL

WELTING COLOUR CORRESPONDS TO SIZEWhite 7/S • Blue 8/M • Red 9/L • Black 10/XL

LENGTHDependent on size, in mm (flat) 355PACKAGINGPairs or pieces per pack/box 12/72COLOUR OF SUPPORT/COATING

Black

RECOMMENDATIONS FOR USE• Store away from light and humidity• Cleaning: The gloves can be laundered between 40 - 60°C max. However, the

customer or launderer is responsible for the performance of the gloves afterlaundering. Best cannot be held liable for this.

• Do not wear gloves when there is a risk of entanglement by moving parts ofmachines.

• Gloves must not come in contact with an open flame.• Potential allergens: carbamate

[ Updated 01/02/2010 ]

RECOMMENDED FOR THESE RISKS:

Heat & cold

Abrasion

SlipsSlips

RECOMMENDED FOR THESE LINES OFWORK:

RECOMMENDED FOR THESE LINES OFWORK:

Metallurgical industryMetallurgical industry

Food industryFood industry

EC compliance certificate delivered by the notified body 0321 SATRA House - Rockingham Road, Kettering - Northampshire NN16 9JH - United Kingdom

The descriptions, characteristics, applications and photos are given for information purposes and do not constitute acontractual commitment. The manufacturer reserves the right to make any modifications it deems necessary.

Cat. II EN388 - 2003

3232

ABRASION0 1 2 3 4

TEARING0 1 2 3 4

CUTTING0 1 2 3 4 5

PUNCTURE0 1 2 3 4

EN 407 - 2004

X2XXXX

FLAMMABILITYX 1 2 3 4 CONVECTIVE HEATX 1 2 3 4 SMALL SPLASHES OF MOLTEN METALX 1 2 3 4

CONTACT HEAT0 1 2 3 4 RADIANT HEATX 1 2 3 4 LARGE SPLASHES OF MOLTEN METALX 1 2 3 4

• Heat protection up to 260°C

Globus Building38 Wheel Forge WayTrafford Park, ManchesterM17 1EHTel: 0161 877 4747 Fax: 0161 877 4746www.globus.co.uk