THIS INSTRUCTION BOOKLET CONTAINSIMPORTANT SAFETY INFORMATION, PLEASEREAD AND KEEP FOR FUTURE REFERENCE.

Lot Number:

Date:

Epic 3 in 1 TV StandItem# 88335750

Congratulations on your latest Atlantic purchase. Follow these instructions and you’ll have thisnew product assembled in no time. If you need any help,or to order missing/replacement parts,please call 1-800-747-2660 or email customer_relations@atlantic-inc.com.

Assembly Tips:

Become familiar with the instructions and all parts.

Make sure that all parts are in the box and in good condition.

Assemble the product on the open flat carton or a rug to protect the product andyour floor.

Some heavy products need a second person to assist in the assembly.

Use of power tools is not recommended.

Caution:Never let children climb on furniture or play with furniture.

Do not sit or stand on furniture.

Do not overload shelves.

Use care when moving furniture. Furniture can tip over if moved improperly.

Only move furniture when it is empty of TV or other electronic components.

Care Instructions:

Use electrostatic dust cloths to clean furniture.

Do not set hot or cold containers directly on the furniture surface.

!

It is strongly recommended that at least two people carry out the assembly.

Do not place aTV that is heavier than the recommended load rating on the furniture surface.

Do not install on sloping surface.

Assemble the product close to a wall.

With each step, first insert and hand-tighten all bolts and screws by hand. After ALL

BOLTS are slightly screwed in, fully tighten bolts with Phillips screwdriver in sequentialpattern (clockwise or counter clockwise).

Improper handling can result in cuts and lacerations.

-1-

A

B

C

D

E

F

G

H

J

L

N

P

Q

R

S

1

1

2

1

1

1

1

1

1

1

1K

2

1

1M

5

5

35

18

5

8U

7T

Item Components Parts List Item Components Parts List QtyQty

Tools needed (not included)Tools needed (included)

-2-

Parts List

V

W1

1W2

6

W4

6W5

2W3

W6

1

-3-

H

A

T x 6

G

N

N

F

JR x 6

1. Attach the back panel(F) & metal support wire(J) to the TV mount support wire(G)&(H) with screws(R) & nuts(T).

2- Attach media holder (N) to panel(A) with screws (V).

V x 6

-4-

3- Attach tube(P) to panel(A) with screws (R).

4- Attach feet connector (S) to tube(P).

P

P

P

PP

P

P

P

PP

A

R x 20

S x 5

-5-

5- Attach side panels(C) to panel(A) with dowels (U).

6- Attach lower panel(B) to body with dowels (U).

C

C

A

B

U x 4

U x 4

-6-

7- Attach feet(Q) to body and turn it clockwise to tighten.

8- Attach TV mount support wire to body with screws (R).

Q x 5

R x 8

-7-

9- a- Slide the back boards(D & E) between unit & TV mount support wire.b- Fasten the back board(D & E) to the body with screws(V).

10- a- Hang TV frame(K) onto hooks of TV mount support wire as shown in diagram 10.a

b- Fasten TV frame (K) to TV mount support wire with screw(R) & nuts(T).

9.a

b.01a.01

OK

9.b V x 12

E

T

R

DD

E

K

K

11- Fasten two TV mounting brackets (L)&(M) on the back panel of the TV with included hardware.

TV

L

M

PAY EXTRA CARE AND ATTENTION TO THIS STEP.MAKE SURE THE APPROPRIATE MOUNTING HARDWARE IS BEING USED PROPERLY.

1. Select correct Mounting Hardware according to the screw hole size on your TV, discard any remaining Machine Screws or Spacers.

2. Carefully lay your Plasma/Flat Panel TV on its Face on a non-abrasivesurface, making sure to lay padding undermeath it so as not to damage the screen.

3. Place left Mounting Rail and Right Mounting Rail in the appropriate position, making sure CENTERED on the back of the TV and LEVEL with one another.

MOUNTING HARDWARE LIST

HARDWAREIDENTIFICATION

U1

U2

U3

V1

V2

V3

PICTURE SIZE(mm)

T1

T2

T3

4 x 15

4 x 35

4 x 54

5 x 54

6 x 54

5 x 35

5 x 15

6 x 15

6 x 35

HEAD DIAMETER(mm)

8

8

8

8

8

8

10

10

10

Ø6

X

Ø5

Ø4

-8-

12- a- Hang the TV onto the TV frame.

Max. 80 lbs Fits flat panel TV’S up to 42 Inches

b- To secure unit to wall with wall tether(W1), wall anchor(W4), dry-wall screw(W2) and washer(W3).

12.a 12.b

W2

W1

W3 W4

-9-

Attach the TV frame(K) to the solid wall with wall anchor(W6) & screws (W5) onto the solid concrete and concrete block wall.

W6 x 6

Wall

Wall

W5 x 6

K

OK

14- Hang the TV onto the TV frame.

Max. 80 lbs Fits flat panel TV’S up to 42 Inches

-10-

13- For wall mounting TV purpose.

Product Warranty: Atlantic Inc., warrants to the original purchaser that its products are free from defect in materials or workmanship. If after inspection, we find that the product was defective in materials or workmanship, we shall repair or replace the product at our discretion. This warranty does not cover accidental damage, misuse, improper care or alteration and excludes claims for incidental or consequential loss. This limited warranty applies to product purchased in the U.S. and Canada.This warranty gives you specific legal

Keep this Instruction Manual for future reference.Keep your original proof of purchase (store receipt).If parts are missing, DO NOT return to the store. To order missing / replacement parts or for assembly assistance please contact customer_relations@atlantic-inc.com. Or call 1-800-747-2660 M-Th, 8am-5pm, Fri, 8am-12pm, P.S.T.

U.S. and other foreign patents pending / Patentes de los EUA y países extranjeros en trámite / Brevets en cours pour les États-Unis et autres pays / U.S. und andere ausländische Patente sind hängig

All rights reserved / Derechos Reservados /Tous droits réservés

Made in China / Hecho en China / Fabriqué en Chine

www.atlantic-inc.com

R1.0 110724 #88335750

rights and you may also have other rights which vary from State to State.This warranty duration will be last one year.

2011

Max. 80 lbs

Max. 80 lbs

-11-

Max. 80 lbs Fits flat panel TV’S up to 42 Inches