9 How to install T4A GPS Maps 1410 - Tracks4Africa...Montana, eTrex, Dakota, Zumo, Colorado, Oregon and some of the ... For more information on how to u˘ˇ Ba˘ˇcamp, please refer

1 COPYRIGHT TRACKS4AFRICA

How to install T4A GPS Maps

Option 1: Plug & Play SD Card

T4A GPS Maps are distributed on a

Plug & Play SD card. This is an SD

card with T4A GPS Maps preloaded

and ready to use in your

compatible Garmin GPS.

Compatible units are: Nuvi,

Montana, eTrex, Dakota, Zumo,

Colorado, Oregon and some of the

newer ‘x’ range units, e.g. 60csx as

well as the GPSMap62 and 78

series of recreational units.

Size matters, so we have changed

the cover to a different size, same

as a standard CD.


Step 1: Insert SD Card

• Switch off your GPS, remove any existing SD cards (keep in safe place)

• Insert the T4A GPS Maps SD card. Use either the Micro SD or the Micro

SD plus Standard adapter depending on what type of SD card reader you

have on your GPS

Step 2: Select T4A GPS Maps

• Switch on your GPS, browse to MapInfo on your menu and ensure that

T4A GPS Maps are switched on. For Nuvi and Zumo units, this can be

found by clicking on the ‘spanner’ (Tools). Then select

Settings>Map>MapInfo to get to the screen where map selection is made

• If you have any previous versions of T4A GPS Maps installed on your GPS’s

internal memory you will need to remove the maps.

Option 2: Load from your computer

For older GPS units which do not accept a Plug & Play SD card, you will need to

install T4A GPS Maps on your computer and transfer the maps to your GPS,

using MapSource, BaseCamp or MapInstall. These are all applications provided

by Garmin.

If you have a GPS which was manufactured in 2011 or later then you are advised

to use the latest version of MapInstall to transfer maps from your Mac or PC to

your GPS.

Examples of older units that do not use an SD card are 276c, 76c and 60c.


How to obtain MapSource & Basecamp:

Download BaseCamp from the Garmin website. Install the application. You can now use BaseCamp,

or you can also download the latest MapSource upgrade from the Garmin website and simply run

the upgrade after you have installed BaseCamp. Now you will have BaseCamp and MapSource

installed on your PC.

If you are unsure where to find these downloads, do a Google search for “Garmin basecamp” or

“Garmin MapSource”

For more information on how to use Basecamp, please refer to Garmin’s help tutorials which can be

find on their website. At time of this publication this information was available from the internet

location below:

http://www8.garmin.com/learningcenter/training/basecamp/


Windows users:

You can use Mapsource or Basecamp with MapInstall

Mapsource Option

STEP 1: Install MapSource

• If you already have MapSource installed on your PC then skip this step.

• If you do not have MapSource installed, obtain a copy and install it before

you go ahead. See end of document for ways to obtain a copy of

MapSource.

STEP 2: Install T4A GPS Maps to your PC

1. On the SD card there are install files for your PC. Insert the SD card into

an SD card reader. Some GPS units, digital cameras and mobile phones

can be used as SD Card readers when connected to your PC. The best

option would be to use a dedicated SD card reader if your PC does not

already have one.

2. Use Windows Explorer to browse the contents of the SD card, look in the

folder called “PC Install Files”. You will find the installation file in this

folder.

3. Select T4A GPS Maps_Travellers Africa_1505.exe and run it.

4. Follow the instructions on the install wizard; then press Exit. Now T4A

GPS Maps are installed on your PC.


STEP 3: Transfer T4A GPS Maps from your PC

to your GPS using MapSource

REMEMBER! If you already have maps installed on your GPS, the above

operation will delete those maps and install the selected ones.

1. Open MapSource

2. Select T4A GPS Maps Viewer from the Product menu

3. Connect your GPS to your PC and make sure it is switched on

4. Use the Map Tool to select the maps you want to transfer (Drag a box

around the entire map coverage.


A total of 16 maps should be selected.

From the Transfer menu, select Send to device... Select your device from the list and click on Send. The

transfer process will take a couple of minutes. Do not operate or unplug your GPS before this operation

has completed.


BaseCamp with MapInstall Option

Maps are viewed in BaseCamp and then transferred via MapInstall from your PC to the GPS.

STEP 1: Install BaseCamp

Visit http://www8.garmin.com/support/download_details.jsp?id=4435 and follow the on screen

instructions.

STEP 2: Install MapInstall

Visit http://www8.garmin.com/support/download_details.jsp?id=3291 and follow the on screen

instructions. You now have a legal, working copy of Garmin BaseCamp and MapInstall.

If you already have BaseCamp on your PC, go to HELP – CHECK FOR SOFTWARE UPDATES to make sure

you are using the latest version. The steps below are applicable to BaseCamp v3.3.3 (or later) and

MapInstall v4.0.1 (or later):

When sending the map/s, MapInstall should be open and your GPS system switched on and plugged in.

Each time a map set is sent to a Garmin GPS the previously loaded maps are erased from the GPS.

If you have other maps on your internal memory, then send Tracks4Africa maps to your SD card or vice

versa.

STEP 3: Transfer maps using MapInstall

To transfer maps to your device, open MapInstall.

The GPS device + SD card should be listed in one line. If you want to transfer maps to the internal

memory of your device, make sure that no SD card is inserted in the device.

If you want to transfer maps to the SD card in your device, simply insert the SD card into the GPS.



For some older units the SD card and unit name will be listed separately. In that case, make sure

you select the destination where you want to send the maps. Click on Continue and select the maps you

want to send:

If you are using a newer device, click on CUSTOMIZE to select the map(s) you want to send to your

device.


Click on the map name of the map that you want to send to your device. Your map will be highlighted

on the screen. Click on continue: Example screenshot


Click on install: example screenhot

The following screen will appear:


To check whether the maps were successfully sent, switch on your Garmin GPS device, go to TOOLS >

SETTINGS > MY MAPS and check whether T4A is listed (note steps to check whether the maps are

loaded may vary depending on which GPS you’re using).

This can take a few minutes (note it shouldn’t take hours). When the installation is done, click FINISH.


On the GPS: Select T4A GPS Maps on your GPS

1. Unplug and switch on your GPS. Go to the menu where you select the

maps and make sure that T4A GPS Maps is selected.

Never use any two map products for the same area at the same time as it may

result in conflicts. Simply select which one you need and switch the other off.

Depending on what GPS unit you have, it will differ from GPS range to GPS

range. (i.e. the procedure you will follow on the Garmin Nuvi will differ from a

Garmin Montana etc) Your installed GPS Maps will always be listed under your

Map information which is located under your settings / tools option on the GPS.

Steps on the newer Garmin Nuvi range: (Please note that the older Garmin Nuvi

range will work differently to the newer units)

• Switch on your GPS and select Settings on the home page.

• Then select Map & Vehicle on the next page.


• On the next page, scroll down and select myMaps. All your installed GPS

Maps will be listed here.

Enable the map you wish to use on your GPS by selecting the tick box

Remember that you may only have one map product enabled (ticked) otherwise

the GPS won't know which map to use and will give navigation errors.


Steps on the Garmin Montana range:

On the home page of the GPS, click on the arrow on the left-hand side of the

screen.

Select Setup on the next page


Then select Map.

Click on Map Information and then Select Map.


Click on the map you wish to enable on your GPS device.

Select Enable in order to have the GPS map of your choice enabled.

Remember that you may only have one map product enabled otherwise the GPS

will give navigation errors.


Documents

9 How to install T4A GPS Maps 1410 - Tracks4Africa...Montana, eTrex, Dakota, Zumo, Colorado, Oregon and some of the ... For more information on how to u˘ˇ Ba˘ˇcamp, please refer