CALRAD90 series - test clip leads, alligator clips & battery holders

123

90-781 TEST LEAD SETFeatures 5 color-coded leads,terminated with wire hooks forhands free testing. 5 colors:white, black, red, green, yellow

RUBBER INSULATEDALLIGATOR CLIPSSturdy nickel plated jaws withstrong spring and hard bite. 11⁄2"long. Specify color. 90-765..........................................Black90-766 ............................................Red

90-768 ALLIGATOR CLIPSKit of 5 alligator clips. Nickelplated with screw terminals. Alsofits banana plugs.

90-767 TEST CLIP SETThin wire kit of 10 leads, 15"long. Miniature insulatedalligator clip each end. (2 eachof 5 colors: white, black, red,green, yellow) #27 awg wire.

90-771 ALLIGATOR CLIPS WITHINSULATED HANDLESKit of 4 insulated alligator clips (2Red and 2 Black). Screwterminals. Also fits banana plugs.

90-764Same as 90-767, but withmedium weight clips and wire.Colors: black, red, white, green,yellow. #21 awg wire.

90-772 BATTERY CONNECTORSCompletely insulated, snap fastenertype with color-coded leads. Made tofit flat 9-volt and miniature 45-voltbatteries with 1⁄2" connector spacing.Available with 21⁄2", 4", 61⁄2",and 8" leads.90-772M Molded 9-volt battery clip with 6 “ leads.

90-770 HEAVY DUTY TEST CLIP LEADSHeavy duty, f lexible wire,insulated clips. Four 30" cables(Black, Red, Yellow and Green).#18 awg wire.

SNAP-IN “AA” BATTERY HOLDERSSturdy, plast ic, l ightweightconstruction. For use with radios,recorders, school projects andmany transistor applications. Willaccommodate 11⁄2-volt penlightbatteries.

90-773............ 2 cell holder (less batteries)90-774............ 4 cell holder (less batteries)90-775............ 2 cell holder (less batteries)90-777............ 8 cell holder (less batteries)90-779............ 4 cell holder (less batteries)

90-773

90-774

90-775

90-777

90-779

CALRAD90 series - battery & fuse holders, speaker terminals

124

90-782PANEL MOUNT FUSEHOLDERPanel mounting for 3AG-typefuses. Mounting hole size 1/2".19⁄32" long.Rating ........................... 10 amps / 250 Vac

90-811 UNIVERSAL INLINE FUSE HOLDERConsists of insulated plastic fuseholder and 25"-wire. Handles3AG-type fuses. Excellent forhome, auto radios and tapeplayers. 18 gauge wire.

90-783-ULFUSE HOLDER–UL VERSIONPanel mounting fuse holder for3AG fuses. Mounts in 1⁄2" hole.11⁄4" deep behind panel. Rating ........................... 10 amps / 250 Vac90-783 Non-UL Version. 19⁄32" long.Rating ........................... 15 amps / 125 Vac

90-818 HEAVY DUTY INLINEFUSE HOLDER10-gauge wire with 30-Ampfuse included. Length is 13”.

90-838CB REPLACEMENTHARNESSFits many CB sets on the markettoday. Complete with color-coded wire, fuse holder and 2-Amp fuse and molded plug.

90-780 SAFETY FUSE HOLDERPanel mounting for 3AG-typefuses. Fits in panels up to 3⁄16"thick, 19⁄32" mounting hole.Overal l length 13⁄4" behindpanel 115⁄16". Rating ........................... 10 amps / 250 Vac

90-7514-PUSH TERMINALCONNECTORSPush terminal wire connecting block.2 red and 2 black push posts. Just atouch of the finger completes the circuit.Simple, yet positive action. Perfect foramplifier and speaker connections. Dimensions................ 211⁄16"L x 15⁄16"W x 5⁄8" DMounting centers ...................................... 23⁄8”

90-755 2-PUSH TERMINALCONNECTORSPush terminal wire connectingblock. 1 red and 1 black pushposts. Dimensions.............................. 25⁄16"W x 1"HMounting Centers ............................... 113⁄16"

HEAVY DUTY INLINEFUSE HOLDERSATC/ATO* blade type fuseholder. Length is 8”.90-731.......................... 16-gauge wire90-732.......................... 10-gauge wire

* ® ATC/ATO is a registered trademark of Little FuseCompany.

90-838

90-835 90-836

“AAA” BATTERY HOLDERSMade of durable plastic shell andnickel plated contacts to stopcorrosion from battery acid. Allhave 6 inch leads (red and black).

90-745............ 1 cell holder (less batteries)90-746............ 2 cell holder (less batteries)90-747............ 4 cell holder (less batteries)

90-745

90-746

90-747

CALRAD90 series - speaker terminals, battery connectors

125

90-756 PUSHBUTTON BINDINGPOST TERMINAL CUPIdeal for fast connections. Springloaded. Just press and insertwires, release and wires aresecurely fastened. Installs easilyinto most speaker cabinets. Redand Black posts. Mounts in 2"hole, 25⁄16" dia. mounting centers.

90-809 SUBMINIATURE PLUGColor-coded 5 Red, 5 Black perpackage. This plug wil l f i tCalrad 90-810 binding post.

90-740 SPEAKER TERMINAL CUP2 1/4" x 2 1/4" square. Hasspring loaded connectors. Redand black posts. 240 Vac @ 5 amps.

90-810 MINIATURE BINDING POSTColor-coded 5 Red, 5 Black perpackage. Will accept lead wireor Calrad sub-miniature plug 90-809. Excel lent for use withtransistor circuit boards.

90-741 SPEAKER TERMINAL CUP2 1/2" x 3 1/8" size. Has springloaded connectors. Red andblack posts.

5-WAY BINDING POSTSPlastic insulation. Has 5⁄16" keyedthreaded mounting shaft. Willmount in panels up to 1⁄4" thick.Colors shown below. 90-799 ..........................................Black90-800.............................................Red

90-808 SPADE LUGSColor-coded 5 Red, 5 Black perpackage. Rear of lug wil laccommodate Calrad 90-809subminiature plug.

90-730-RD Positive90-730-BK NegativeBATTERY POSTCONNECTORGold plated battery postconnector for automotivebattery. Accepts 4 and 8 gaugewire.

90-735BATTERY RINGCONNECTORGold plated ring terminal forconnecting to automotivebattery. Accepts 4 gauge wire.5/16” hole size.

CALRAD90 series - rubber feet, chassis boxes & tools

126

90-817 RUBBER FEETNon-marking, semi-cone construc-tion and countersunk mountingscrews. Size: 9⁄16" dia. (4 per pkg.)

90-795RUBBER FEETAdhesive-backed molded bum-pers apply instantly. Just peel offbacking and apply to any dry,clean surface. 4 per pkg.Dimensions ........... 0.300" Ht. x .880" square

90-796RUBBER FEETAdhesive-backed molded bum-pers apply instantly. Just peel offbacking and apply to any dry,clean surface. 4 per pkg.Dimensions................. 0.400" Ht. x .880 dia.

90-797RUBBER FEETAdhesive-backed molded bum-pers apply instantly. Just peel offbacking and apply to any dry,clean surface. 4 per pkg.Dimensions............... 0.320" Ht. x .635" dia.

90-794RUBBER FEETAdhesive-backed molded bum-pers apply instantly. Just peel offbacking and apply to any dry,clean surface. 4 per pkg.Dimensions ........... 0.129" Ht. x .520" square

90-819 HEAVY DUTYALUMINUM UTILITY BOXPrecision made. Ideal formounting controls, intercom's andmost transistor switching devices.Overall size: 5 3⁄16" x 31⁄8" x 13⁄4".

HANDY BOXES WITHALUMINUM PANELMade of sturdy black ABS plastic,removable aluminum cover.Perfect for housing test equipment,experimental products. 90-784 ................ 31⁄4"L x 21⁄8"W x 11⁄8"H90-785.................. 4"L x 2 1⁄8"W x 15⁄8"H90-786................... 61⁄4"L x 33⁄4"W x 2"H

PLASTIC UTILITY BOXESSlotted for circuit boards. Graysturdy ABS plastic.90-880............. 2 1⁄8"L x 4 1⁄8"W x 1 3⁄4"H 90-881............. 2 1⁄2"L x 5 1⁄8"W x 1 3⁄4"H90-882............. 3 1⁄2"L x 5 7⁄8"W x 2 1⁄2"H90-883............ 4 1⁄2"L x 7 3⁄8"W x 2 9⁄16"H

90-798 RUBBER FEETBlack, non-marking semi-coneconstruction, countersunk screwheads. Size: 13⁄16" diameter(4 per pkg.)

90-935TWIN WRENCH DRIVERSETDual headed wrench with tenin terchangeable t ips . Onewrench is straight the otherright angled. Bits: 3 slotted,4 phillips, and 3 torx.

CALRAD90 series - tools

127

90-8417-PIECE SLOTTEDSCREWDRIVER SETScrewdrivers are made of hardenedand tempered molybdemum steel.Black point blades are againstreflection of light, swivel top issuitable for miniature work.Contains: .8-1.2-1.6-2.0-2.4-3.0-3.5 x 40mm

90-84722-PIECE SCREWDRIVERAND TOOL SETHas interchangeable tips withslotted and phillips screwdrivers.Also hex nut wrenches and aflexible shaft.

90-807 METRIC 6-PIECE PLASTICINSULATED SLOTTED &PHILLIPS TIP SCREW-DRIVER SETContains: slotted; 1.0, 1.6, 2.4, and 3.0philips; 0 and 1.

90-8426-PIECE PHILLIPSSCREWDRIVER SETScrewdrivers are made of hardenedand tempered molybdemum steel.Black point blades are againstreflection of light, swivel top issuitable for miniature work.Contains: 0.5-0.4-0.3-0.2-0-1.2x 40mm

90-8437-PIECE HEX BALL DRIVERSET WITH HARDENED TIPSScrewdrivers are made of hardenedand tempered molybdemum steel.Black point blades are againstreflection of light, swivel top issuitable for miniature work.Contains: 0.7-0.9-1.3-1.5-2.0-2.5-3.0 x 40mm

90-802 11-PIECE SLOTTED &PHILLIPS TIP SCREW-DRIVER SET

90-806 METRIC 16-PIECE MULTI-PURPOSE TOOL KITThis kit contains 6 bladescrewdrivers (0.8 to 3.8 mm); 4Phillips screwdrivers (2-No. 0 and2-No. 1); 3 Allen-type drivers (1.5,2.0 & 2.5 mm); 3 Hex nut drivers(3, 4 & 5 mm); plastic case.

90-936FLEXIBLE RATCHETDRIVER SETComfortable ratchet wrench withflexible neck and ten inter-changeable tips. Flex neck isdetachable. Bits: 3 slotted, 4phillips, 3 torx.

90-93817 PIECE OFFSETRATCHET & SOCKETDRIVER SET - AmericanHandy ratchet wrench with teninterchangeable tips or six sockets.Sockets are metric sizes. Sockets:3/16”, 7/32”, 1/4”, 5/16”, 11/32”, 3/8”.Bits: 3 slotted, 4 phillips, 3 torx.

90-93717 PIECE OFFSETRATCHET & SOCKETDRIVER SET - MetricHandy ratchet wrench with teninterchangeable tips or six sockets.Sockets are in fractions of an inch.Sockets: 5, 6, 6.5, 8, 9, 10. Bits:3 slotted, 4 phillips, 3 torx.

CALRAD90 series - tools

128

90-828 3-PIECE LONG-HANDLE SCREW DRIVER SETScrewdrivers are made of hardenedand tempered molybdemum steel.Black point blades are againstreflection of light, swivel top issuitable for miniature work.Contains: s lot ted; 2.4x75,3.0x100. phillips; 0-2x7.

90-859 6-PIECE LONG HANDLESCREWDRIVER SETScrewdrivers are made of hardenedand tempered molybdemum steel.Black point blades are againstreflection of light, swivel top issuitable for miniature work.Contains: s lot ted; 2.4x75,3.0x100,4.0x150. phillips; 0-2x7,0x100,1x150.

90-8547-PIECE TORX DRIVER SETScrewdrivers are made of hardenedand tempered molybdemum steel.Black point blades are againstreflection of light, swivel top issuitable for miniature work.Contains: 05-06-07-08-09-10-15 x 40mm

90-8447-PIECE COMBO SETScrewdrivers are made of hardenedand tempered molybdemum steel.Black point blades are againstreflection of light, swivel top issuitable for miniature work.Contains: slotted; 1.4 - 2.0 - 2.4- 3.0 x 40mm & phillips’ 0.3 -0.2 - 0 x 40mm

90-8458-PIECE SCREW DRIVERSETIn plastic case. Contains: phillips#0, #1, #2 and slotted 3.2 x75mm, 5.0 x 75mm, 6 x100mm, 6 x 38mm.

90-846 8-PIECE SLOTTEDSCREWDRIVER SETScrewdrivers are made of hardenedand tempered molybdemum steel.Black point blades are againstreflection of light, swivel top issui table for miniature work.Contains: slotted; 1.4x40, 1.6x40,2.0x40, 2.4x75, 3.0x75. phillips;0.2x75, 0.3x50, 0x75.

90-8557-PIECE SLOTTED ANDPHILLIPS SETComes with magnifying lens,tweezers, and sharp probe.Contains: slotted; 1.0, 1.4, 2.0,2.4. phillips; 0.4, 0.3, 0.2.

90-858 6-IN-1 SCREWDRIVER6 interchangeable bits stored inthe shaft of this screwdriver.Comes with 3 phi l l ips and3 slotted bits.

90-910 3.2 x 75mmBLADE SCREWDRIVER90-911 5 x 75mmBLADE SCREWDRIVER90-915 3.2 x 75mmPHILLIPS SCREWDRIVER90-916 5 x 75mmPHILLIPS SCREWDRIVERAll above have easy-grip ergonomic handles.

90-941 20-IN-1SCREWDRIVER SETHinged storage handle, 19 types oftips includes: slotted, phillips, torx,metric sockets, 17.5” telescopingmagnetic pickup tool.

CALRAD90 series - tools

129

90-839 7-PIECE METRIC HEXNUT DRIVER SETRubber handle grips with vinylpouch. Contains: 3mm, 3.5mm,4mm, 4.5mm, 5mm, 5.5mm, 6mm.65mm shaft length.

90-934 5 INCH CURVEDFORCEPSStainless steel forceps with rubbercoated grips.

90-930METRIC 7-PIECE FOLD-UPHEX KEY SETContains: 1.3mm, 1.5mm, 2mm,2.5mm, 3mm, 4mm, 5mm. Finish:case painted in green lacqueredfinish. Key fingers sand blastedand then nickel plated.

90-930AAMERICAN 7-PIECEFOLD-UP HEX KEY SETContains: 1/16”, 5/64”, 3/32”,1/8”, 5/32”, 3/16”, 1/4”.Finish: case painted in greenlacquered finish. Key fingers sandblasted and then nickel plated.

90-93130-PIECE AMERICAN/METRIC HEX KEY SETFold-up case. Long arm design in inches.Short arm design in metric. Contains: 15pieces; 3/8”, 5/16”, 1/4”, 7/32”, 3/16”,5/32”, 9/64”, 1/8”, 7/64”, 3/32”,5/64”, 1/16”, 0.050”, 0.028”. 15-pieces;10mm, 8mm, 7mm, 6mm, 5.5mm, 5mm,4.5mm, 4mm, 3mm, 2.5mm, 2mm, 1.5mm,1.3mm, 0.9mm, 0.7mm.

90-9335 INCH STRAIGHTFORCEPSStainless steel forceps with rubbercoated grips.

90-909 7-PIECE AMERICANSTANDARD HEX KEYAND BALL SET WITHHOLDERSizes: 1/8”, 5/32”, 3/16”, 7/32”,1/4”, 5/16, 3/8”.

90-9089-PIECE METRIC HEXKEYS SET WITH HOLDERSizes: 1.5mm, 2mm, 2.5mm,3mm, 4mm, 5mm, 6mm, 8mm,10mm.

90-8406-PIECE NUT DRIVER SET- MetricIn plastic case. Contains: 3.0 x 20 mm, 3.5 x 20 mm,4.0 x 20mm, 4.5 x 20mm,5 x 20mm.

90-942 20 PIECESCREWDRIVER SET6-1/4” hex driver socket typehandle with various tips, includes:slotted, phillips, torx, and hex ball.Complete with impact resistantcarrying case.

CALRAD90 series - tools

130

90-9055-PIECE NEEDLE FILE SET5 style edges: f lat, round,square, half-round, and triangle.

90-9064-PIECE PRECISIONTWEEZER SETFine sharp point, curved tip,general point tip, and flat tip.Comes with carrying pouch.

90-912 4 PIECE CERAMICNON CONDUCTIVETWEEZER SETIdeal for handling semiconductors, silicon chipsand delicate wafers. Static dissipative andconductive ideal for use with sensitive componentswhere ESD damage is a concern. Tweezers aremanufactured with carbon loaded materials. 4blade types: duck bill, wide duck bill, 60° fine tip,and straight fine tip. Heat resistant up to 180°C(250°F), Acid resistance. tips do not spread underpressure. No contamination and non magnetic.Overall length 4.75”.

90-849 MICRO BENT NOSE PLIER

90-850MICRO FLAT NOSE PLIER

90-851MICRO CUTTING NIPPER

90-852MICRO ROUND NOSEPLIER

90-853MICRO LONG NOSE PLIER

90-902 POCKET STYLE BUTANESOLDERING TOOLComes with two tips - a torchand a pointed tip. Cap withbui l t - in l ighter. Length: 6”Diameter: .75”

90-927-890-927-12 BNC INSERTION ANDREMOVAL TOOLSEasy grip handle. Available in 8”and 12” shaft lengths.

90-928-8 COAX CABLEASSEMBLY TOOLThis tool is used to remove ‘F’connectors in tight areas. Also aidsin the assembly of standard ‘F’ seriesconnectors with a female mountedconnector to push against. also usedto clear damaged or strippedthreads.

90-803 3 PIECE PRECISIONALIGNMENT TOOLSInsulated handles with steel tips.Antistatic nylon construction.

90-80410 PIECE PLASTICALIGNMENT TOOLS4.5” long molded plastic rods withvarious types of tips: slotted,hexagon, and square. Easy griphandles.

CALRAD90 series - tools

131

90-921 AC SOLDERING IRON30 watt pencil style. 6’ cord.

90-922 REPLACEMENT TIPReplacement tip for 90-921.

90-925 SOLDERING IRONSTAND WITH SPONGEWorks with Calrad solderingirons 90-921, 90-923, andother AC irons.

90-900 TEMP-CONTROLLEDSOLDERING STATIONThis electronic temperature control solderingstation uses a sophisticated electronic circuitenabling the user to change the temperaturefrom 300°F (150°C) to 900°F (480°C)without changing the tip or heating element.Temperature is maintained within ±10°F of itspreset temperature by a unique temperaturesensor located near the tip giving rapidresponse and little temperature variation.Soldering station has a digital readout.90-900T Replacement tip for 90-900.90-900R Soldering iron replacement.

90-926 60/40 ROSIN CORE SOLDER370 degree melt ing point,18 awg, 7 inch dispenser tube.

90-923 AC SOLDERING IRON40 watt pencil style. 6’ cord.

90-924 REPLACEMENT TIPReplacement tip for 90-923.

90-9042-PIECE SOLDERING AIDPROBE KITOne with right angle tip and theother straight. Useful in scrapingflux, glue, and micro positioning.Overall length 6”.

90-879 TELESCOPICINSPECTION MIRRORAll angle ball joint mirror with stainlesssteel mirror backs. Al lows visualinspection of hidden areas. Double balljoint l ink that swivels the mirror forviewing 360°. Made of tempered springsteel to move more freely and hold adesired position. Telescopic handle withvinyl grip. Mirror size: 2” x 1”, overallhandle length: adjustable 8.6” x 15”.

90-857 SELF-ADJUSTINGCUTTER-STRIPPER2-in-1 cutter/wire stripper with self-adjusting mechanism providingprecise wire str ipping withoutdamaging the conductor. Easy-to-useadjustable wire stop guaranteesconsistent strip lengths. Adjustmentdial sets blade pressure to thicknessof the insulation. Prepares wires.5mm2 to 8mm2

90-805CABLE SLITTING TOOLEasy grip handle, adjustable cuttingblade. Prepares cables up to 1.75”.This tool can cut around or slit thelength of the cable jacket.

90-903 BUTANE GAS TORCHWITH CERAMIC HEADComes with different tips for allstyles of work. Unit is refillable.Five different tips are included.

90-900R

CALRAD90 & 99 series - tools

132

90-848 AUTOMATIC WIRESTRIPPER/ TERMINALCRIMPER 10-26 AWG

90-856PRECISION WORKHOLDER WITH 1.75”MAGNIFYING GLASSAdjustable heads with 6 balljoints for all angles, locks at anyangle. Alligator spring clips foreasy use. Nickel plated fittingswith heavy cast-iron base.

90-940MAGNETIZERDEMAGNETIZERUse to magnetize or demagnetizesmall hand tools. Comes inplastic carry case.

90-920 RATCHETCRIMPING TOOLDesigned to produce a solid anduniform crimp with every use.Crimps spade type connectors from.5-1mm2, 1.5-2.5mm2, 4.0-6mm2.Handles cable sizes from 10 to 22gauge wire. Comfortable plastic grip.

90-787 HIGH INSULATIONELECTRICAL TAPE -BLACKPlastic electrical tape consists of highdielectric strength and flexible stretch,snug wrap, waterproof. Will resistoil, gasoline, water, salt water,alkalis and sunlight. 3⁄4" wide, 60 ft.UL approved.

DRILL BITS1/4”

99-F12F . . . . . . . . . . . . 1/4" x 12” Flex Shaft99-F18F . . . . . . . . . . . . 1/4" x 18” Flex Shaft99-F24F . . . . . . . . . . . . 1/4" x 24” Flex Shaft99-F36F . . . . . . . . . . . . 1/4" x 36” Flex Shaft99-F58F . . . . . . . . . . . . 1/4" x 58” Flex Shaft99-F72F . . . . . . . . . . . . 1/4" x 72” Flex Shaft

1/2”99-1218B. . . . . . . . . . 1/2" x 18” Stiff Shaft99-1218C . . . . . . . . . 1/2" x 18” Carbide Bit99-1218F . . . . . . . . . . 1/2" x 18” Flex Shaft99-1224F . . . . . . . . . . 1/2" x 24” Flex Shaft99-1224B. . . . . . . . . . 1/2" x 24” Stiff Shaft99-1236F . . . . . . . . . . 1/2" x 36” Flex Shaft99-1236B. . . . . . . . . . 1/2" x 36” Stiff Shaft99-1236C . . . . . . . 1/2" x 36” Masonary Bit99-1258F . . . . . . . . . . 1/2" x 58” Flex Shaft99-1258B. . . . . . . . . . 1/2" x 58” Stiff Shaft99-1272F . . . . . . . . . . 1/2" x 72” Flex Shaft

3/8”99-3812B . . . . . . . . . 3/8” x 12” Stiff Shaft99-3812F. . . . . . . . . . 3/8” x 12” Flex Shaft99-3818B . . . . . . . . . 3/8” x 18” Stiff Shaft99-3818C . . . . . . . . 3/8” x 18” Carbide Bit99-3818F . . . . . . . . . 3/8” x 18” Flex Shaft99-3824F . . . . . . . . . 3/8” x 24” Flex Shaft99-3824B . . . . . . . . . 3/8” x 24” Stiff Shaft99-3824C. . . . . . . . . 3/8” x 24” Carbide Bit99-3836F . . . . . . . . . 3/8” x 36” Flex Shaft99-3836B . . . . . . . . 3/8” x 36” Stiff Shaft99-3836C . . . . . . 3/8” x 36” Masonary Bit99-3848B . . . . . . . . . 3/8” x 48” Stiff Shaft99-3858F. . . . . . . . . . 3/8” x 58” Flex Shaft99-H3858F . . . . 3/8" x 58” Flex w/ extra hole99-3872F . . . . . . . . . 3/8" x 72” Flex Shaft

3/4”99-7548B . . . . . . . . . 3/4” x 48” Stiff Shaft

Auger Bits99-A10036B . . 1” x 36” Flex Shaft, Auger99-A10048B . . . . . . . . . . . 1” x 48” Auger99-A1224B . . . . . . . . . . 1/2” x 24” Auger99-A1236B . . . . . . . . . . 1/2” x 36” Auger99-A1248B . . . . . . . . . . 1/2” x 48” Auger99-A3424B . . 3/4” x 24” Stiff Shaft, Auger99-A3436B . . . . . . . . . . 3/4” x 36” Auger99-A3448B . . . . . . . . . . 3/4” x 48” Auger99-A3472B . . . . . . . . . . 3/4” x 72” Auger99-A3824B . . . . . . . . . . 3/8” x 24” Auger99-A3836B . . . . . . . . . . 3/8” x 36” Auger99-A3848B . . . . . . . . . . 3/8” x 48” Auger99-A3872B . . . . . . . . . . 3/8” x 72” Auger99-A5836B . . . . . . . . . . 5/8” x 36” Auger99-A5848B . . . . . . . . . . 5/8” x 48” Auger

All drill bits have the holeat the end of the shaft forfeeding wires thru thewall or window sill.

90-932HOBBY TOOL KITKit includes: 5” side cutter, 5” longnose plier, ratchet handle, 2”extension bar, 5-6-8-10mmsockets,10 piece tip set, stainlesssteel tweezers, 6 piece precisionscrewdriver set, and foldingcarrying case.

CALRAD90 series - cigarette lighter plugs, jacks & cable assemblies

133

90-605 15ampCIGARETTE LIGHTERPLUG WITHRETRACTABLE CABLEBlack, heavy duty 18 AWG coiledcable. Extends to 15 ft. Fits mostautomotive lighter sockets. Addsportability to your electronic equipmenteither inside or outside of vehicle. 3amp fuse. rated up to 15 amps. Blackcable. Stripped and tinned leads.

90-606 CIGARETTELIGHTER PLUGFits most automotive l ightersockets. 3 amp / 3 AG fuse. 18awg zip cable - red/black. 16”leads and fused plug.

90-602 POWER CORDEXTENSION "Y"ADAPTER POWER CABLEEnables two 12 volt units to beconnected to one 12 volt battery packor auto accessory outlet. Includesreplaceable 3 amp fuse. Rated up to15 amps. 18 awg cable. Black cable.

90-608 3amp RIGHTANGLE CIGARETTELIGHTER PLUG WITHCABLERight angle low profile cigarettelighter plug with 2-ear groundingsystem for stability and solidelectrical connections. 3A/3AGfuse protected. 16”, 18awg.cable with a black PVC jacket.

90-607 CIGARETTELIGHTER PLUG WITH CABLEFits most automotive l ightersockets. 32” black 18awg.cable. No fuse protection.

90-610CIGARETTE LIGHTER PLUG Snap-together case with singlescrew nut for fast easyreplacement. Easy accesssolderless terminals. Singlefinger ground system. Acceptsup to 16 awg cable. Over alllength: 2.86”. Spring loaded tip.

90-604CIGARETTE LIGHTER PLUG Snap-together case with singlescrew nut for fast easyreplacement. Easy accesssolderless terminals. Singlefinger ground system. Acceptsup to 18 awg cable. Over alllength: 2.86”. Spring loaded tip.

90-611CIGARETTE LIGHTER PLUG 2-ear version for better groundconnection. Fuse protected,complete with 5 amp fuse.Accepts up to .25” O.D. cable.Over all length: 3.3”. Rubberstrain relief. Color black.

90-601 CIGARETTE LIGHTER JACKCigarette lighter jack for autoaccessories. Rated up to 15amps. Accepts up to .25” O.D.cable. Over all length: 2.7”.

90-600CIGARETTE LIGHTERSOCKET Chassis mount version mounts in7/8" diameter hole. Over alllength: 2.64”. 0.15” diameterpost and 0.25” spade.Currentrating 15A.

CALRAD90 series - cigarette lighter plugs, jacks & cable assemblies

134

90-612CIGARETTE LIGHTER PLUG 2-ear version for better groundconnection, bakelite material.Accepts up to .25” O.D. cable.Over all length: 3”. No fuseprotection. Spring loaded tip.

90-613CIGARETTE LIGHTER PLUG Fuse protected, complete with 5amp fuse. 2-ear version forbetter ground. Accepts up to.17” O.D. cable. Over all length:3.7”. Rubber strain relief. Colorblack. Spring loaded tip.

90-615CIGARETTE LIGHTER PLUG 2-ear version for better groundconnection. Easy grip handle forremoval. O.D.: 0.25”. Overalllength: 3.7”. Rubber strain relief.Color black. Spring loaded tip.

90-616RIGHT ANGLE CIGARETTELIGHTER PLUG Accepts 18-22 gauge wire. Fuseprotected with a 2A fuse. 2 earground system and cable strainrelief. O.D.: 0.25”Overall length: 2.7”

90-618CIGARETTE LIGHTERCABLE WITH 2.1mmCOAX PLUG 6’ 20awg. black cable with 2.1mmmale coax plug to male 5A fuseprotected cigarette lighter plug withpower indicator L.E.D. for use withall types of portable electronicsrequiring 12Vdc.

90-619CIGARETTE LIGHTERCABLE WITH 2.5mmCOAX PLUG 6’ 20awg. black cable with 2.5mmmale coax plug to male 5A fuseprotected cigarette lighter plug withpower indicator L.E.D. for use withall types of portable electronicsrequiring 12Vdc.

90-620ADJUSTABLE CIGARETTELIGHTER PLUG Ratchet style cigarette lighter plugwith built - in il luminated (L.E.D.)power switch. 10A fuse protected(fuse included). 2 finger groundsystem. 95° adjustable head.Accepts up to 16awg. cable.

90-614 L.E.D.CIGARETTE LIGHTER PLUG Same as 90-613 with LED forpower indication. O.D.: 0.19”Overall length: 3.8”. Rubberstrain relief. Color black. Springloaded tip.

45-821 LIGHTER PLUGFused l ighter plug with LEDindicator. 6 ft. cord with 2.1coax plug on the other end. Fuseprotected at 5 amps. Withpositive center.

45-820 LIGHTER PLUGFused l ighter plug with 6detachable plugs. 12 ft. coiledcord with multi plugs on theother end. Fuse protected at 2amps.

CALRAD90 series - cable ties

135

90-895 REUSABLE 5-INCH CABLE TIE

90-896 REUSABLE 8-INCH CABLE TIE

CABLE TIE PRODUCTSThese tie products are manufactured of 100% non-corrosive, Type 6/6 Nylon. They meet MIL-S-23190, MS 3367, ASTM D4066-82, and are recognized under the component program of theUnderwriter's Laboratories, Inc. (File No. E 37800). All products are Self-Extinguishing UL 94Flam., Class: V-2. They are stocked in natural and weather-resistant, heat-stabilizedblack. Other colors are available upon request as noted on illustrations. The part numbersshown are for bulk-packaged, natural ties. Order other colors by adding color desiredto part number shown. All cable ties sold in lots of 25, 100 or 1000 except partnumbers 90-861, 90-862, 90-865, 90-866, 90-895, 90-896 which are sold inlots of 25, 100, 500.

90-830*

90-831***

90-832**

90-833**

90-860****

90-861**

90-862**

90-863*

90-864*

Minimum Bundle DiameterLoop Tensile Overall

Part Cross Strength Minimum Maximum Military LengthNumber Section lbs. (kg) in. (mm) in. (mm) Standard in. (mm)

90-830 * STD 18 (8.1) 3⁄16 (4.7) 7⁄8 (22.2) MS 3368-5 4.0 (101.6)90-831 *** MIN 18 (8.1) 1⁄16 (1.6) 7⁄8 (22.2) MS3367-4 4.0 (101.6)90-832 ** INT 40 (18.1) 1⁄16 (1.6) 11⁄4 (31.7) MS3367-5 5.5 (139.7)90-833 ** STD 50 (22.7) 1⁄16 (1.6) 13⁄4 (44.5) MS3367-1 7.5 (190.5)90-860 **** INT 40 (18.1) 1⁄16 (1.6) 21⁄8 (53.9) No App. Std 8.0 (203.2)90-861 ** STD 50 (22.7) 1⁄16 (1.6) 3 (76.2) MS3367-7 11.0 (279.4)90-862 ** STD 50 (22.7) 1⁄16 (1.6) 4 (101.6) MS3367-2 14.0 (381.0)90-863 ** STD 50 (22.7) 1⁄16 (1.6) 13⁄4 (44.5) No App. Std 8.0 (203.2)90-863-11** STD 50 (22.7) 1⁄16 (1.6) 3 (76) No App. Std 11.0 (282.0)90-863-14** STD 50 (22.7) 1⁄16 (1.6) 4 (102) No App. Std 14.0 (365.0)90-864 * STD 50 (22.7) 3⁄8 (9.5) 13⁄4 (44.5) MS3368-1 7.5 (190.5)90-869 ** 175 (79.3) 3⁄16 (9.5) 7.2 (184) No App. Std 24.0 (612.0)90-870 ** 175 (79.3) 23⁄4 (9.5) 103⁄4 (273) No App. Std 36.0 (914.0)90-872 175 (79.3) 3⁄16 (9.5) 15 (375) No App. Std 48.0 (1216)90-895 ** 50 (22.7) 1⁄8 (9.5) 11⁄4 (32) No App. Std 5.9 (150.0)90-896 ** 50 (22.7) 1⁄8 (9.5) 2 (51) No App. Std 7.8 (198.0)

* Available in Natural.** Available in Natural and Black.*** Available in Natural, Black, Red, Orange, Yellow, Green, Blue, Purple, Brown, and Gray.**** Available in Natural, Black, Red, Orange, Yellow, Green, Blue, Purple, Brown, Gray and

Neon Red, Neon Green, Neon Blue, Neon Yellow, Neon Pink, and Neon Orange.

CALRAD90 series - cable tie tools & accessories

136

CABLE TIE MOUNTSSupplied with two mounts per peel-off strip, for faster separation from backing. Made of high-impactType 6 Nylon providing high tensile strength. Four-way insertion feature speeds assembly, since tiesslide easily into mounts from any of the four sides. The 1", adhesive-backed mounts have a loadcarrying capability of 0.5 lbs, while the 3⁄4" mounts are rated at 0.25 lbs. Mount Application:Steel/aluminum, glass/ceramics, painted surfaces, rigid vinyl, plasticized vinyl, polystyrene90-865.......................................................................... 3⁄4" 90-866 .......................................................................... 1"90-865-BK........................................................ 3⁄4" Black 90-866-BK ........................................................ 1" Black.......................................................................................................................................................................................................................................

Initial Ultimate.......................................................................................................................................................................................................................................Peel Strength Medium Very HighRelative Shear Strength Very HighRelative Solvent Resistance High.......................................................................................................................................................................................................................................

Continuous Intermittent.......................................................................................................................................................................................................................................Temperature Performance 225°F 375°F.......................................................................................................................................................................................................................................

REUSABLE, BALL-TYPE CABLE TIESBall-type, reusable cable ties. Available in four sizes. 10 per pack.90-890 ............................................................................... 2" 90-891BK ........................................................ 4" Black90-892 ............................................................................... 5" 90-892BK ........................................................ 5" Black90-893 ............................................................................... 7" 90-894 ................................................... 7" – Arrow-type90-891 ............................................................................... 4"

90-867A CABLE TIE INSTALLATION TOOLDesigned to combine maximum productivity and speed with operator comfort and safety. Simpleto use - place tie around bundle and pull hand tight. Apply tool at head of tie and squeeze. Tieis pulled to pre-set tension and cut off in one simple operation. Adjustable, pre-set tension resultsin uniform cable tie application, neater bundles more efficient harnessing. Replacement cuttingblades available for extended life. Short squeeze factor for greater comfort with less fatigue.Lightweight, only 12 ounces. Hand contoured handle. Positive positioning feature on tensionadjustment knob.

90-868 CABLE TIETENSION TOOL

CALRAD90 series - L.E.D. lamps

137

90-697 8 POSITION L.E.D. LAMPFlexible 12" gooseneck with sturdy removable base assembly. Over 50 year average lamp life.Smooth adjustable brightness control with precise regulation circuitry. L.E.D lamps produce purewhite light for easy reading, the lamp assemply never gets hot. Perfect for A\V Mixing Consoles,orany area that needs Illumination. Detachable 9V power supply for easy wire routing. Inludesvelcrow tape for easy mounting, DC power supply, free standing base. Comes with velcro tape foreasy mounting. Features:

Flexible 12" gooseneckRemovable table top & Fixed base assembliesOver 50 year Avg. L.E.D lamp lifeSmooth Adjustable Brightness ControlPure white light for easy readingLamp Assembly never gets hotSolid State L.E.D’S with regulation circiuitry for accurate and trouble free operation.Detacheable Power Supply for easy wire routing, Polarity sensative (+), (-) connectors.Inline Male\Female connector for easy cable routing. Polarity type connector (+), (-)

Specifications:Power .................................................................................. 9 Vdc Lamp Life Avg ....................................................... over 50 years.Current Draw Max.............................................................. 250ma Power Supply ................. 9Vdc, 300ma, CALRAD 45-757S includedPower output..................................................................... 4 Watts Standard Base Assembly Size .............. L- 4.750" x W- 2" x H- 1.5"Cable Length ............................................................................. 6’ Lamp Assembly Color........................................................... BlackReadable Viewing Area 12 " x 12", L.E.D Output Angle 20° x 8 L.E.D’S Large Removable Base Assembly Size L- 5" x W- 2-5" taper x H- .75"

90-697-PMB PERMANENT MOUNT BASEBracket for permanately mounting the 90-697 to a flat surface. Includes allhardware.

90-699-XLR90-700-BNCPerfect for mixing consoles or desk top,public address usage. Gooseneck length12". Terminates to a male XLR or BNCconnector. Over 50 year Avg. L.E.D lamplife. Material color: BlackSpecifications:Power .............................8 L.E.D lamps operates on 12Vdc.Current consumption..............................................250ma.Gooseneck length.........................................................12"(90-699-XLR) Wiring ...... XLR Pin 1=ground, Pin 2=12Vdc(90-700-BNC) Wiring.... BNC shield=ground, center pin 2=12VdcMaterial color............................................................Black

90-702For use in Car's truck's. Provides a brightpure white light for reading. Never getshot, easy to handle and operate.Terminates to a male cigarette lighterconnector with ON/OFF switch. Over 50year Avg. L.E.D lamp life.Fuse protected.Specifications:Power .............................8 L.E.D lamps operates on 12Vdc.Current consumption..............................................250ma.Gooseneck length.........................................................12"Material color............................................................Black

90-701-XLR-RAPerfect for mixing consoles or desk top,public address usage. Terminates to amale XLR connector. Over 50 year Avg.L.E.D lamp life. Material color: Black.

Specifications:Power .............................8 L.E.D lamps operates on 12Vdc.Current consumption..............................................250ma.Gooseneck length.........................................................12"Wiring ............................ XLR Pin 1=ground, Pin 2=12VdcMaterial color............................................................Black

90-1000 PERSONALL.E.D SAFETY LIGHTWith the mini-flash unit on atnight, you will stay visible tomotoris ts while walking orjogging on the road. Clip themini -flash either on your hat orclothes. Momentary push on\offpower switch. Bright flashing redL.E.D. . Easy to replace 3Vlithium battery CR2032.

90-1000-BAT3V lithium replacement batteryCR2302

90-697-PMB

90-750-RD (Red)90-750-GN (Green)90-750-BL (Blue)90-750-YL (Yellow)90-750-WH (White)MICRO LIGHT L.E.D. FLASHLIGHTOver 100,000 hours of bulb life, includes two 3V lithium batteries.Durable case with keychain ring. Shock and water resistant design.Push button for momentary operation or mini ON/OFF switch.Available in 5 different colors. This unit will provide many years oftrouble free operation.

90-750-BAT3V lithium battery for 90-750, two required.

Momentary Button

ON/OFF Switch

Durable PlasticOpening, difficult

to break